"Drilldown characteristic" not permitted for display hierarchy
Hi Experts,
I want to display the hierarchy in my BEx Analyzer for which i tried to activate the hierarchy for the same and got the below error.
"Default values "Drilldown characteristic" not permitted for display hierarchy"
Also I have used a standard variable for this infoobject and it is used for user input in the selection screen of the report.
Eventhough we proceed further with this message, in the Report display, it is not showing the hierarchy in the display.
Please respond ASAP.
Rgds
Kumar
Hi,
I don't know why you are getting this error. But we can create hierarchy either by using herarchy name or else by creating hierarchy variable......In characteristics for which you are creating hierarchy, in display tab of properties give DISPLAY AS KEY, SORT CHARACTERISTICS -- AS IN THE QUERY and RESULT ROWS --- ALWAYS SUPPRESS....
In HIERARCHY TAB --- Give Hierarchy name select use hierarchy setting check boxand select always show radio buttons......
Do in this way and it may work......
Regards,
Kalyani.
Similar Messages
-
Error: Common entries are not permitted for plan queries and input queries
Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
samwhen i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted. -
Error not permitted for charecteristic product
Hi All,
when i assign a product to a campaign i am getting an error that says
" Value 426B202D64EA13EBE1000000C23759EE is not permitted for characteristic Product"
Any idea how to go about this error.
Rg,
SurenderResolved. Downloaded customizing object DNL_CUST_SPROD.
-
An entry in field Funds Ctr is not permitted for account 401000 Message no F5394
Hi Friends,
I have done Fund Management configuration and while posting the document through FB50, I am getting error message " An entry in field Funds Ctr is not permitted for account 401000 "Message no. F5394 and I also checked Field status and Posting keys for Gl account and everything looks fine..
Please help on this..
Thanks
GoutamHi,
please check the message the error will give you the table number or Programme name
go to SE38 for programme and for table SM30
system will show where is the exact error facing.
thanks -
An out-of-sequence check is not permitted for payroll type B
We had to do advance payments for 4 pay periods for an employee through offcycle workbench. One of the checks was wrong so we had to reverse it. It is an out of sequence reversal. Now when i try to do a correction run , it gives me an error An out-of-sequence check is not permitted for payroll type B
How can i run the correction run now. Please help
Edited by: sagarika sharma on Aug 14, 2010 6:29 AMCheck with SAP note 1425764,696067 and 1127119.
Mohan -
Idoc-51:Accounting transaction not permitted for posting in FI/CO
Hi,
Message type FIDCC2
Basic type FIDCCP02
Process code FID2
When i try to post for F-02, through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
I'm using the following fields:
E1FIKPF : FI Document Header (BKPF)
BUKRS : Name of global company code
GJAHR : Fiscal Year
BLART : Document Type
BLDAT : Document Date in Document
BUDAT : Posting Date in the Document
MONAT : Fiscal Period
TCODE : Transaction Code
WAERS : Currency Key
HWAER : Local Currency
E1FISEG : FI Document Item (BSEG) -1
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 40
DMBTR : Amount in Local Currency
KOSTL : Cost Center
HKONT : General Ledger Account
WERKS : Site
E1FISEG : FI Document Item (BSEG) -2
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 50
DMBTR : Amount in Local Currency
HKONT : General Ledger Account
WERKS : Site
Pls guide in fixing this.
rgds,
baluHi
What is the solution , please let us know ? since we have faced the same error.
Regards
Bhavana -
Accounting transaction not permitted for posting in FI/CO
Hi,
For inbound idoc triggering,
Message type FIDCC2
Basic type FIDCCP02
Process code FID2
When i try to post for F-02(or FB01), through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
I'm using the following fields:
E1FIKPF : FI Document Header (BKPF)
BUKRS : Name of global company code
GJAHR : Fiscal Year
BLART : Document Type - SA
BLDAT : Document Date in Document
BUDAT : Posting Date in the Document
MONAT : Fiscal Period - 05
TCODE : Transaction Code - FB01
WAERS : Currency Key
HWAER : Local Currency
GLVOR : Business Transaction - RFBU
E1FISEG : FI Document Item (BSEG) -1
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 40
DMBTR : Amount in Local Currency
KOSTL : Cost Center
HKONT : General Ledger Account
WERKS : Site
E1FISEG : FI Document Item (BSEG) -2
BUZEI : Number of Line Item Within Accounting Document
BSCHL : Posting Key - 50
DMBTR : Amount in Local Currency
HKONT : General Ledger Account
WERKS : Site
For which fields u've triggered successfully, pls help in resolving the same.
rgds,
baluHi,
i appreciate for your quick reply...
i've applied the code corrections in the FM FI_IDOC_PREPARE , but still same error coming.
tnx n rgds,
balu -
Value & is not permitted for attribute Sales Unit - Material Object
Hi gurus,I would very much appreciate expert advice on how to solve the problem I´m facing when lauching middleware object MATERIAL.
I have 2 BDocs in red showing the following error:
Value B20 is not permitted for attribute Purchase Order Unit
Value B20 is not permitted for attribute Sales Unit
I have checked table T006 and customizing and I do have unit of measurement B20 created on CRM so I don´t understand where is the error.
Could you please help me?
Thanks in advanced,
Regards,
Lorena.Dear Lorena,
Many Thanks.
ok, I need to do manually in the CRM system. I have one question
1: If any changes in the ERP system the data is automatically replicated in to CRM system right? then Why we need to Configure again in the CRM system. for Examaple: Proudct group and Tax.
2. No, I did not replicate Sales Org., but this is also automatically replicated into CRM system. But it is already replicated into CRM i.e. Initial download.
my question is in r/3: If one customer have 2 Sales Area data is maitained in the R/3, that information is also available in the CRM side. if one more sales area is assigned to same customer, that information is also availbale in the CRM system right? but I could not able to find the new sales area data. what is the reason? and how I can dowload the changes in the CRM system?
I realy thanks to you, providing most valuable information and supporting to me.
kindly provide me where should I promote points to you.
I will try and let you know, if I am getting any problem, I will ask you again.
Thanks and Regards,
Jags -
Plant Not permitted for selected Doc Type
I have created new plant and assigned to existing Purchase organization. i am able to create PR but while creating Purchase order i am getting error
Plant Not permitted for selected Doc Typewhat is the error message number? double click the message to obtain.
I have not seen any assignment of doucment types to plants, nor a message like mentioned. -
Error when replicating material master - Value not permitted for PO Unit
Hi all,
I am having the following issue. I am trying to replicate material master from ECC 6.0 to CRM 5.0, but I am getting an error to which I am not being able to find the solution:
Value GFO is not permitted for attribute Purchase Order Unit
Message no. COM_PRCAT020
Diagnosis
You want to specify that the value GFO is allowed for the attribute Purchase Order Unit. However, in attribute maintenance or in the
higher-level category ('parent category'), you specified that the value GFO is not allowed for this attribute.
I tried to find where to edit this attribute in Customizing, and also in tcode COMM_ATTRSET, but I have no idea if this was the right direction.
Has anyone faced this issue before? I would really appreciate any help, since this is preventing me from completing material replication.
Thanks in advance.
Best regards,
JoãHello Sudipta,
I checked the attribute in COMM_ATTRSET, but there aren't any specific values for it. There is a value table T006, which I believe is standard, and it contains UoM GFO.
With this being the case, the error I'm getting makes even less sense to me...
Can you tell me if in there is any other place in CRM where we can set UoM?
Thank you, once again.
Regards,
Joã -
MIGO not permitted for goods movement
Hello gurus
When I tried doing Goods Issue on an order (movement type 261), an error came up saying that the order was not found or not permitted for goods movement
What would be the cause of this? How can I remedy it?
Thanks in advance, points assuredHi,
This is because the Order may be not released.
Release the order and proceed further.
Regards,
Siva -
Credit control area CCAJ not permitted for company code
Hi All,
We have One company code, under that we have two credit Control Areas.
In the Config settings, we have maintained for (Assining the compnay code to Credit Control Area) to one CCA.
Now, it is while creating the Invoice for another CCA. It is throwing the below error.
Credit control area CCAJ not permitted for company code 1301
Message no. F4746
Please guide.
Regards
VinayHi
Check whether u have maintained the combination in SPRO-Financial Accounting-A/c Rec and Pay-Credit Mgmt-Assign permitted Credit control areas to company code.
regards
vamsi Javaji -
Credit control area CCAJ not permitted for company code 1301
Hi All,
We have One company code, under that we have two credit Control Areas.
In the Config settings, we have maintained for (Assining the compnay code to Credit Control Area) to one CCA.
Now, it is while creating the Invoice for another CCA. It is throwing the below error.
Credit control area CCAJ not permitted for company code 1301
Message no. F4746
Please guide.
Regards
VinayHi Vinay,
To do this you have to go to the path SPROFINANCIAL ACCOUNTING-ACCOUNTS RECIEVABLES/PAYBLES-CREDIT MANAGEMENT-CREDIT CONTROL ACCOUNTASSIGN PERMITTED CONTROL AREAS TO COMPANY CODE. In this activity you can enter additional credit control areas which are allowed for each company code, in addition to this default credit control area.
You can enter these credit control areas in the line item or let the system determine them from the order data, customer data, or a user exit in the order. This way you can use the control area as a flexible internal control instrument and data which has to be posted in the same company code for accounting reasons no longer has to be managed in the same control area.
Regards
Ram Pedarla -
Order not found or not permitted for goods movement
Hi,
I try to implement Goods Movement by using BAPI_GOODSMVT_CREATE. I try to do it over delivery number. So I use the following code. But somehow it returns "Order not found or not permitted for goods movement" error. I can do the same movement over MIGO transaction. But BAPI can not find the order. Do you have any idea? Do I miss a parameter o something?
Thanks.
data: begin of gmhead.
include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
error_code(220) type C,
temp_xchpf like mara-xchpf,
sbatch like mseg-charg.
DATA : temp_vbeln LIKE likp-vbeln.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = 'sy-uname.
gmhead-VER_GR_GI_SLIP = '1'.
gmhead-VER_GR_GI_SLIPX = 'X'.
gmcode-gm_code = '01'. " for 101
itab-mvt_ind = 'F'.
itab-plant = '0001'.
itab-entry_qnt = AMOUNT.
itab-move_type = '101'.
itab-item_text = 'invoice'.
itab-deliv_numb = temp_vbeln.
APPEND itab.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gmhead
goodsmvt_code = gmcode
goodsmvt_headret = mthead
TABLES
goodsmvt_item = itab
return = errmsg.
CLEAR error_code.
LOOP AT errmsg.
IF errmsg-type EQ 'E'.
error_code = errmsg-message.
ENDIF.
ENDLOOP.
IF error_code IS INITIAL.
COMMIT WORK.
IF sy-subrc NE 0.
error_code = 'Commit error'.
EXIT.
ENDIF.
ENDIF.
ERROR_C = error_code.Dzed,
I set item information but I'm still getting error.
Actually I didn't understand the difference between applying goods movement over delivery number or po number. What is the difference between them?
If I try to use only deliv_num & deliv_item data, BAPI looks for PO and finds nothing and gives error. But when I use PO number and item for goods movement, this time it is still impossible to be successfull(another error). So I decided to use both delivery number and PO together in BAPI; so I filled those fields:
po_number
po_item
deliv_numb
deliv_item
But as you may guess, no success.
There are also another fields for delivery :
deliv_num_to_search
deliv_item_to_search
I have no idea what are they for.
And also there's another field in BAPI header:
red_doc_no
Maybe I have to use this field to pass delivery number. I'm not sure. I'm confused. -
Skip Initial Screen is not permitted for transaction SWF_OBJ_EXEC_CL
Hi Experts,
When clicking on the trip to edit the item from UWL, I am getting the error Skip Initial Screen is not permitted for transaction SWF_OBJ_EXEC_CL. Basically it is trying to open the tcode in Web GUI. I have the authorization for this tcode too.
Pleas suggest where could be the issue.
Thanks,
Murthycan you chekc this note 1055324
If you want the sysetm to open something other than the default
method of the attached object in the UWL then you can use SWFVISU in
the backend.
By default (With no entries in SWFVISU) when you click on the attached
object from the UWL it will open WEBGUI and sue transaction
SWF_OBJ_EXEC_CL to execute the default method of the business object.
If you maintain a entry in SWFVISU it will check this first and
open whatever you have referenced in SWFVISU and not open WEBGUI and
execute SWF_OBJ_EXEC_CL.
In SWFVISU maintain an entry under the section "Object Visualisation"
enter the object method and link it to a visualisation type e.g.
BSP, WEBDynpro, iView, etc.
Maybe you are looking for
-
HT5065 Why can't I upload m4v videos to iBooks Author?
I recently managed to add an m4v video to one of my books, after several days of trying, without succes, it finally worked, but without me changing anything. Now I have a new book, with a new video, (m4v) and this doesn't work as well. I get the note
-
hi all My Adapter Engine is not working in RWB. In runtime workbench - message monitoring u2013 message from component - adapter engine is not working experts provide me the solution Regards Raju
-
Is this the only tablet that can use iTunes? Or can you use Android Tablets with iTunes?
I'm looking into buying a tablet... But can i get my music from iTunes onto different tablets like the android 2.2...? Or just iPads? Can someone please help?! I'm going black friday shopping soon...!
-
Airport Extreme usb hard drive connection loss after closing finder window
I just did a software update on my MacBook Pro and now I am experiencing a weird Airport Extreme usb hard drive issue. I can see the name of my airport extreme in the Shared section of my finder window. However when I click on it, the finder indicate
-
The first image I open in photshop takes a minute to open
When I open my first photo in photshop CC, I have to wait one minut more or less, until the image appear. The rest of images that I open after the first, open normally. What is the problem?