Drilling-down in charts - can someone explain the behavior please

Hi guys,
I'm trying to understand how a particular chart is drillable "Sample Sales".
The report in question is 8020 from "03 Tiering and Distribution". I circled the report that I clicked on:
!http://img407.imageshack.us/img407/4103/screen1c.jpg!
Then, it took me to the more detailed view of the same report (8020):
!http://img203.imageshack.us/img203/2144/screen2c.jpg!
I checked the report and the Interaction property in "Additional Charting Option Menu" for this chart was set to Default. The measure that's being drilled-in in Percentile - and it also has Default in its interaction properties.
So I guess I have several questions:
1. How does this report drill to the more detailed level on the same report? (is this because everything is set to "Is Prompted")?
2. Why does "Default" value allow for drill-down in the chart? I tried creating my own charts - and Default there doesn't trigger a drill-down at all, even though there's data on a lower level.
3. Can you drill in-place and have some content to remain relatively static - and some other fields change? I saw a similar question before - where it was suggested to use more than 1 report in the Dashboard view. (instead of combining everything in compound view).
Thank you

For #2. I believe you did not create hierarchies in your rpd for those dimensions and measures you have on report.
For # 3. I belive the first 3 reports in this dashboard are aligned horizantally inside one section of the dashboard and "Drill in Place" has been enabled on the section / these answer requests. Check the section properties. If you want this behavior, try each report embedded in different sections and enable drill in place for each section where you want to drill further but remaining content remains same.
btw how did you paste your dashboard over here? Thats cool way of posting images.. appreciate your response.
Thanks

Similar Messages

Cffunction and how to ? can someone explain the code to me line by line

Hello i went to get this online and i want to test it.
the udf is supposed to
* CSVFormat accepts the name of an existing query and
converts it to csv format.
* Updated version of UDF orig. written by Simon Horwith
my question how to break it down.
can someone explain the code to me line by line
thanks

silviasalsa wrote:
> thanks
>
> but line by line
>
> what is
> if(ArrayLen(Arguments) GTE 2) qualifier = Arguments[2];
> if(ArrayLen(Arguments) GTE 3 AND Len(Arguments[3]))
columns = Arguments[3];
> returnValue[1] = ListQualify(columns, qualifier);
> ArrayResize(returnValue, query.recordcount + 1);
> columns = ListToArray(columns);
> for(i = 1; i LTE query.recordcount; i = i + 1)
> {
> rowValue = ArrayNew(1);
> ArrayResize(rowValue, ArrayLen(columns));
> for(j = 1; j LTE ArrayLen(columns); j = j + 1)
> rowValue[j] = qualifier & query[columns[j]]
& qualifier;
> returnValue[i + 1] = ArrayToList(rowValue);
> }
> returnValue = ArrayToList(returnValue, Chr(13));
> return returnValue;
> }
>
> thanks
Apparently this UDF takes two optional parameters so that one
can define
(A) a text "qualifier" to use in the CSV file, this is
usually the
single quote|tick ['] mark - but sometimes one wants this to
be a
different character and (B) what columns to use in the
output in case
one does not want to use all the columns in the record set
in the
outputted CSV file.
The if statements are checking for these optional parameters
and if
found setting the values in them to internal variables.
These
variables are then used in the rest of the logic to create
the CSV output.
HTH
Ian

Can someone explain the use of a hashtable in java?

can someone explain the use of a hashtable in java?

Hashtable allows us to store values along with keys.
One other advantage is, it provides Synchronised methods.
Hope you got it.

Can someone explain the hyperthreading settings in cmos (the 4x,5x, etc.)?

Someone once said admitting you don't know something is the first step on the road to knowledge....or something like that
Can someone explain the hyperthreading setting in the CMOS Setup - mine is set to 5x, which I think is correct for my cpu - Venice 3500+, but I don't really know what it does. What does that setting affect? I think it was 4x by default, until I loaded optimal settings, and it went to 5x.....

HT = Hyper Transport
Q: What is HyperTransport™ technology?
A: HyperTransport™ technology is a new high speed, high performance point-to-point link for interconnecting integrated circuits on a motherboard. It can be significantly faster than a PCI bus for an equivalent number of pins. HyperTransport was previously codenamed Lightning Data Transport, or LDT. HyperTransport technology was invented by AMD and perfected with the help of several partners throughout the industry. It is primarily targeted for the IT and Telecomm industries, but any application where high speed, low latency and scalability is necessary can potentially take advantage of HyperTransport technology. HyperTransport technology was invented in order to unleash the tremendous power of the AMD microprocessors. HyperTransport is planned to bring the computation experience to a new level.
Hyperthreading Technology used by Intel.

Can someone explain the difference between width, maxWidth, explicitWidth, explicitMaxWidth?

Can someone explain the difference between width, maxWidth, explicitWidth, explicitMaxWidth of the UI component? I read the API and I have no idea what do they mean.

Width is the current width. ExplicitWidth is set if you give an component
an explicit width vs a temporary width via setActualSize.
MaxWidth and minWidth factor in either the measuredMax/MinWidth or one set
explicitly.

Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

When you enable photo stream on your Mac, in imports photos currently in your photo stream. However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them. When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99). Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac.

Can Someone Explain the order of things Using Swingworker?

Hi:
Can someone explain very clearly the order of things using Swingworker? Please do not refer the SUN tutorials. I am totally dead in the water with a very large application and the order of things is not sensible. Also, if the worker thread is too long, the GUI gets updated, but my progress bar (killed right after in the finished method) remains running in some instances only.
Can someone explain any debugging methods for thread work?
I am a veteran programmer of 19 years and this one's got me. The event dispatch thread returns immediate, the GUI responds well, but the progress bar setVisible(false); ... just after in the finished() method (on Event Dispatch thread) does not go away, continues running, only on very long (large query) work. I'm truly stumped. I have successful applications of the Swingworker use, the progress bar, and everything works fine. Not this one.
Debugging threads is what I need. Or some tool that visually shows threads as the program runs.
Thanks for any help,
PiratePete

Thanks. I guess I should count my blessings when using free stuff. But I have been impressed with what the J2SDK has to offer. I have been writing a complicated application that I am going to market and most of my problems have been "design" in nature.
Thanks again,
PiratePete

Can someone explain the code for having the Accordion panels closed?

I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
<script type="test/javascript">
var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
</script>
Angela

GPDMTR25 wrote:
I located the answer to my own question (how to get all the accordion panels to remain closed when the browser opens) but I still don't understand the answer. Can someone explain this?
This feature is only supported when using variable height panels, so you must pass a false into the Accordion's constructor for the "useFixedPanelHeights" constructor options, and a -1 for the "defaultPanel" option:
<script type="test/javascript">
var acc1 = new Spry.Widget.Accordion ("Acc1", { useFixPanelHeights: false, defaultPanel: -1});
</script>
Angela
Hi Angela,
You are right, the only way it will work is by setting the fixed height to false. As for the for the default panel option, -1 is not a panel and if you had 3 panels we could have used the number 3 (panel1 = 0) or 99 or whatever as long as there is no panel with that number. If we had used the number 1 for instance, then the 2nd panel would be opened by default.
Hope this helps.
Ben

Can someone explain the tables tab under function parameter declaration ?

Hello,
when declaring a function, part of its parameter interface is the tables tab. So if in FUNCTION1 i declare a table: tdraw like draw (optional)
what does that mean ? does this mean that tdraw will be a table of type draw and at the same time it will be filled up with the same contents as draw has ?
then how can other function (func2) use FUNCTION1 and its table ?
so if inside func2 i also have an internal table AA like draw :
so inside func2 i say:
call function1
tables:tdraw = AA
does this mean that it will assign the result tdraw table of function1 to AA ?
can someone explain details of internal tables and passing them as parameters ?
and which table is assigned to which ?
thank you

Hi hassan,
If you are talking about the tables parameter in SE37, when you declare a table tdraw like draw it only means you are declaring an internal table of type draw but the contents are not filled into it.
In the source code of the program you have to write the code to fetch the data to tdraw and do the manipulations accordingly.
Also, the tables you are declaring can be like the input table or can be used for output table.
suppose u have 2 tables tab1 and tab2, tab1 you are going to input the values to it and the calculated values have to be in another table, you can use tab2 as the result table.
hope it helps.
award points if it helps.

Can someone explain the message about replacing songs when importing a CD?

If this is somewhere, I have not been able to find the answer. When importing a CD, sometimes I get a message that asks if I want to replace existing songs. Can someone explain what this message means? I have tried replacing the songs and not replacing the songs, but I don't see any meaningful differences.
Thanks!

You should sort the list on the Album column, ideally as Album by Artist. Generally all you need to do after that is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

XIR3 - Can someone explain the port number behaviour?

I have two questions regarding some of the port numbers that are appearing on my list. Can someone explain this behaviour?They are as follows:
tcp        0      0 *:1025                      :                         LISTEN      22856/boe_fcprocd
tcp        0      0 *:16577                     :                         LISTEN      21571/boe_jobsd
tcp        0      0 *:1026                      :                         LISTEN      15772/boe_fcprocd
tcp        0      0 *:16583                     :                         LISTEN      21614/boe_fccached
tcp        0      0 *:16584                     :                         LISTEN      21560/boe_jobsd
tcp        0      0 *:16585                     :                         LISTEN      21612/boe_fcprocd
tcp        0      0 *:16586                     :                         LISTEN      21635/boe_jobsd
tcp        0      0 *:16587                     :                         LISTEN      21616/boe_eventsd
tcp        0      0 *:16588                     :                         LISTEN      21629/boe_filesd
tcp        0      0 *:48300                     :                         LISTEN      21326/boe_cmsd
tcp        0      0 *:46093                     :                         LISTEN      12366/boe_cmsd
tcp        0      0 *:16525                     :                         LISTEN      12366/boe_cmsd
tcp        0      0 *:16591                     :                         LISTEN      21600/boe_filesd
tcp        0      0 *:16527                     :                         LISTEN      13022/boe_jobsd
tcp        0      0 *:16592                     :                         LISTEN      21574/boe_jobsd
tcp        0      0 *:16593                     :                         LISTEN      21582/boe_jobsd
tcp        0      0 *:16533                     :                         LISTEN      13057/boe_fccached
tcp        0      0 *:16534                     :                         LISTEN      13018/boe_jobsd
tcp        0      0 *:16535                     :                         LISTEN      13065/boe_fcprocd
tcp        0      0 *:16536                     :                         LISTEN      13028/boe_jobsd
tcp        0      0 *:16537                     :                         LISTEN      13054/boe_eventsd
tcp        0      0 *:16538                     :                         LISTEN      13069/boe_filesd
tcp        0      0 *:16541                     :                         LISTEN      13052/boe_filesd
tcp        0      0 *:16542                     :                         LISTEN      13050/boe_jobsd
tcp        0      0 *:16575                     :                         LISTEN      21326/boe_cmsd
tcp        0      0 *:16543                     :                         LISTEN      13072/boe_jobsd
I have two standalone servers configured on this machine (development box), and therefore two CMS configured to listen on port numbers 16575 and 16525. These are confirmed by the 12th and penultimate line.
Question: Why are another two CMSs also appearing on ports 48300 and 46093 (lines 10 and 11)?
Secondly, I have registered the Desktop Intelligence servers to ports 16535 and 16585 (as shown in lines 5 and 19). They are spawning
child processes on ports 1025 and 1026.
Question: Can I fix the spawned child ports to a fixed range instead of them being selected randomly?

I solved the CMS problem - I hadn't changed the CMS request ports. D'OH! Below are the command lines for the two child processes. Is there any documentation around port number controls?
prismapp 15772 13065 0 11:38 pts/9    00:00:02 /opt/app/mi/mi-bo-dev-env1/bobje/enterprise120//linux_x86/boe_fcprocd -loggingPath /opt/app/mi/mi-bo-dev-env1/bobje/logging/ -documentType CrystalEnterprise.FullClient -maxDesktops 0 -allowSilentRefresh false -fg -restart -name bo_dev_env1_sia.DesktopIntelligenceProcessingServer -pidfile /opt/app/mi/mi-bo-dev-env1/bobje/serverpids/bo_dev_env1_sia_bo_dev_env1_sia.DesktopIntelligenceProcessingServer.pid -ns lonrs00845:16525 -psChildName bo_dev_env1_sia.DesktopIntelligenceProcessingServer_child_1 -psdir /opt/app/mi/mi-bo-dev-env1/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env1_sia.DesktopIntelligenceProcessingServer/child_1 -pscommondir /opt/app/mi/mi-bo-dev-env1/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env1_sia.DesktopIntelligenceProcessingServer/common -orphanTimeout 33 -lib procFC -requestPort 1026 -initFileName /opt/app/mi/mi-bo-dev-env1/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env1_sia.DesktopIntelligenceProcessingServer/child_1/330955ddcecd741 -psChild
prismapp 22856 21612 0 11:41 pts/9    00:00:01 /opt/app/mi/mi-bo-dev-env2/bobje/enterprise120//linux_x86/boe_fcprocd -loggingPath /opt/app/mi/mi-bo-dev-env2/bobje/logging/ -documentType CrystalEnterprise.FullClient -maxDesktops 0 -allowSilentRefresh false -fg -restart -name bo_dev_env2_sia.DesktopIntelligenceProcessingServer -pidfile /opt/app/mi/mi-bo-dev-env2/bobje/serverpids/bo_dev_env2_sia_bo_dev_env2_sia.DesktopIntelligenceProcessingServer.pid -ns lonrs00845:16575 -psChildName bo_dev_env2_sia.DesktopIntelligenceProcessingServer_child_1 -psdir /opt/app/mi/mi-bo-dev-env2/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env2_sia.DesktopIntelligenceProcessingServer/child_1 -pscommondir /opt/app/mi/mi-bo-dev-env2/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env2_sia.DesktopIntelligenceProcessingServer/common -orphanTimeout 33 -lib procFC -requestPort 1025 -initFileName /opt/app/mi/mi-bo-dev-env2/bobje/data//DesktopIntelligenceProcessingServer/temp/bo_dev_env2_sia.DesktopIntelligenceProcessingServer/child_1/546c55ddd11e181 -psChild

Can someone explain the "colors" channel of the histogram?

I'm using CS4 on a Mac
Could someone explain the "colors" channel of the histogram? Does it simply analyze the image in terms of the % of pixels that are
*blue
*cyan
*green
*yellow
*red
*magenta
*grey

Good day!
It represents which number of pixels have which values in the respective Channel, the refreshed total ("Pixels") is the total number of pixels (image or Selection).
Regards,
Pfaffenbichler

Can someone explain the impact Summary Accounts has on Oracle performance?

This may be more of a technical question than a functional question but thought I would test this out on you guys.
Basically I would like to know what Oracle does in the background with summary accounts for it to slow down the period close process. I have been told it's because Oracle applies summary balances to (temporary?) tables, which means Oracle GL is multiplying the number of processes it has to run when you close a period.
Can anyone provide any further info on this?
Thanks

How do you switch off the slide-lock? So you could remove it from a holster and just use it? Or indeed pick it up from a sofa to use.
You can't, and the reason for this is to prevent the screen from being active and any apps being inadvertently/accidentally selected when the iPhone is in your pocket, in a woman's purse, or just by touching the screen whenever.
I would not need the passcode and have found how to switch that off.
You better give this more thought. The passcode lock prevents unauthorized access to anything on your iPhone in the event the iPhone is lost or stolen or from unauthorized access by someone you know. This also prevents someone from syncing your iPhone with iTunes on their computer - creating a backup for your iPhone and extracting data. If your iPhone is lost or stolen, someone must place the iPhone into recovery mode when connected to a computer and can only restore the iPhone with iTunes as a new iPhone - no data on your iPhone can be accessed or extracted in that situation with the passcode lock enabled.
Also, on the homescreen, meaning the first set of icons before sliding any across to view others, is it at all possible to put an email icon for each email account on that screen?
No.
Or do I have go each time, click Emails, Select account, select email .... ??
The iPhone's Mail app includes a blended Inbox mailbox for all email accounts. You can select "All Inboxes" to view received email from all email accounts if you are accessing more than one, or you can select an Inbox for an indivudual account to view received messages by the selected account only.

Can someone explain the following to me

Could someone explain what the below means (in layman's terms)?
FAQ
<script type="text/javascript"></script> Test1 comprises of Best Effort Test: -provides background information.
Download Speed
113 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
Download speedachieved during the test was - 113 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :1024 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps

btspeedtester shows you are connected at 1024 but probably due to resets/disconnections your profile is rock bottom 135 instaed of 750
you are on adslmax up to 8mb
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Can someone explain the installation options?

I have yet to purchase the upgrade..
It looks to be a gamble.. either it will work or it wont..
Is it possible to do a simple upgrade? Or do you have to Archive and Install?
What exactly does Archive and Install consist of?
Im working with 30GB right now and dont feel the need to archive anything...
Someone please explain the installation process before i purchase. Thanks!

For me it worked with "archive & install" , which archives the old system (10.4.10) and installed the new 10.5...which gives you a nearly clean new sys with all old prefs and progs etc.- when it ***** - you can go back to 10.4...
and only take the printers and languages you need - that saves installing time...my macbookpro took about 37 min. of installing 10.5
and works fine ......

Drilling-down in charts - can someone explain the behavior please

Similar Messages

Maybe you are looking for