Drinking straw inside my new MacBook Pro?

Hi Guys,
I'm hoping that someone here might be able to shed some light on this?
I purchased a 17" MacBook Pro a couple of days ago, and when I went to upgrade the RAM last night, I found a piece of what looks like a plastic drinking straw inside the enclosure.
It's clear, about an inch or so long, and crimped at one end.
Does anybody know if this serves some function, and is meant to be inside the machine and has simply worked its way loose; or is it a foreign object that has found its way into the enclosure during manufacture?
Cheers!

same problem here.. I've already reinstalled the OS, did all upgrades and it still freezes.

Similar Messages

  • My puppy got water all on my NEW macbook pro

    So basically, I had my new macbook pro (mid 2012) for only about an hour when my puppy decided to jump on the table and got my laptop all wet. This was last night. She had just gone in her kiddie pool so it's just water, not chlorinated. My first concern was the screen since I already have another macbook pro with a cracked screen. The screen was wet. She stomped on the left side of keyboard with her wet paws too. I'm not too sure if a lot of water went inside because at this time I was concerned about the water on the right speaker. It took me about a minute or two to wipe it all off. I then tested out the speakers by playing music. It was fine from what I can hear... I didn't really get to use the speakers beforehand so I don't know what to compare it too. I also tested out the keyboard and everything seemed to work. I had the macbook still running searching for what to do with the water. Come to find out I should have turned it off immediately.
    So the macbook was still running fine. I turned it off to take the battery off, but I didn't have a twi-wing screwdriver. I ordered a whole tool kit from ifixit and it's suppose to come in tomorrow.
    I did flip the macbook upside down. And I am planning on taking it apart when my kit comes in to see what is going on. If the LSI is red. Is the LSI built in the macbook, or are they stickers? And can they be purchased somewhere?
    Anyway, do you guys think my macbook is fine? Or is corrosion gonna happen? Or if it's running fine now, will it last?
    I would just take this macbook back and say I changed my mind, but it's customized and I read that you can't return customized macbooks. UUUUGH!
    What should I do?

    Take the computer to an Apple store or an AASP for a proper diagnoses.  Whichever is more convenient for you.
    Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care. 
    Apple does have a no questions asked 14 days from the date of purchase return policy.
    NOTE:  If you purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with.   They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple). 
    If you have Homeowners insurance, place a claim with them.
    DIY Instructions
    Immediately disconnect all peripherals, power cord & remove the battery.  Turn the computer over with the lid partly open and the hinge facing upward to let the liquid drain.  Do not flop it over and lay it flat - you want to separate it from the moisture.  Place paper or cloth towels under the machine to sop up the mess.
    After the computer disgorges whatever you spilled on it, don't turn it on for 72 hours or longer.  You want to computer to dry out completely before turning it on again.
    Some users here swear by hairdryers.  Blow drying the innards may bake whatever was in the liquid onto delicate computer components.  Better to let the computer air dry.
    Use plain tepid water to clean out the computer.  If you spilled iced beverage more than likely this ice fried the hot motherboard.
    Sugary, acidic or milky drinks will almost always cause problems later on as the residue starts slowly corroding the computer innards.
    Swab down any sticky parts with distilled water or denatured alcohol.
    If none of the above works, you will need to take the computer to a repair shop.  Apple Care does not cover liquid or food damage.  Believe me, they can tell.  So the old "my computer stopped working" line is not going to work.
    Cleaning Macbook keys after a spill

  • Why I am buying a new MacBook Pro now, but, first, any major issues?

    With the delay of Ivy Bridge, and with my personal view that the next generation of MacBook Pro notebooks will be dropping FireWire 800 to service a better design, I have decided to purchase a new MacBook Pro now.
    I just cannot imagine the new notebooks having a FireWire or Ethernet port, as they add too much thickness.
    While I keep MacBook Pros for up to 4-years, I think this new purchase will have to be a transition computer, as the next model will probably be too irresitable. Having the option of then moving my data via Thunderbolt to Thunderbolt (Tarket Disk Mode) is very appealing too.
    So, any issues with the current line?
    Specifically, has anyone had a screen flicker issue or anything else major?
    Would anyone dare say Thunderbolt is unreliable?
    I really appreciate any thoughts on this - Thank you!

    Shootist007 wrote:
    What you think Apple is infallible? They aren't. Just look at this and all the other Mac forums on the net.
    I am so sorry, but you are dead wrong.
    First, people get their problems resolved here quickly. A majority of the issues here are "Newbie" issues.
    I have been a Mac user since 2007, and I have been on these forums since that time too. I have never once seen a horror story like the ones found on the Dell, Lenovo, and HP support forums that pop up on an hourly basis.
    Read those forums, and you will get tears in your eyes.
    Anytime I have called Apple or visited an Apple Store, they have treated me like a God.
    Apple hardware is bullet proof made of the best materials on the planet. A MacBook Pro is far stronger and more durable than any ThinkPad, Dell Precision, or HP Elitebook.
    Just open up a MacBook Pro to look at the insides as compared to the disaster zones of the aforementioned PCs.
    Oh.... and no bloody stickers on MY notebook.
    Everything just works.
    Little things come up, but they are always solved.
    Now, add programs like Joint Venture, and heaven is a place on earth.
    No PC company comes close to treating their customers the way Apple has treated me since 07.
    Apple has earned my business for life.
    Right now, I can schedule a call with Apple - What PC company does that?
    Apple = Unequaled products, service, and support. No PC company can come close to any of those three traits.
    PS
    And none of those PC forums have people like Kappy, Eww, Bee, Niel, iVmichael, sig, Etresoft, (yourself), and all the other fine members of this community that make it such a pleasure...

  • How do i sync my iphone to my new Macbook pro?

    I recently just purchased a new Macbook Pro and i'd like to be able to sync my iphone to it and use it as my main computer.  Whenever i try to sync it though it says that it has to erase all my content.  This wouldnt be a problem since i backed up my phone on the Macbook and i did Home sharing from my other computer, so all my music, movies, and apps are on my Mac, but im worried its going to mess up all my data on my iphone.  Is it going to erase my contacts, calander events, text conversations, settings, pics, and/or saved data on apps?  If someone could tell me everything that happens when i click erase all data, as well as a possible alternative way of syncing my iphone, i would be very thankful.

    Follow this article How to back up your data and set up as a new device
    In short: Disable autosync, set up at least one contact and event on your Mac, back up manually, tranfer your purchases, sync and let it get erased, restore from the manual backup you made.
    What's inside your backup: iPhone and iPod touch: About backups

  • Missing hard drive memory on brand new Macbook Pro

    Hi all,
    Forgive my lack of technical knowledge here, but I've just bought a new Macbook Pro Retina, and despite migrating literally about 1GB worth of files, the system is showing approx. 22GB of storage space being taken up by 'other.'
    I know these questions are asked a lot, but could anybody help me out with what might be eating up this space and how I can reclaim the it? I appreciate that devices rarely come with the storage space cited on the box, but that seems excessive.
    Thanks.

    For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install the app in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
    For ODS:
    security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
    For GP:
    security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
    The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • I need to download a DVD to my new MacBook Pro but alas, no CD/DVD drive. What now?

    I need to download a DVD and some CDs to my new MacBook Pro but alas, no CD/DVD drive. What now?

    Use an external optical drive such as Apple's USB SuperDrive, or one inside another computer.
    (118366)

  • "Reconnecting" Time Machine Backups on New Macbook Pro

    I recently got a new macbook pro and used Time Machine to set it up. Unfortunately, when I attempt to continue to use time machine backups, I get the warning that I don't have enough space.
    I next attempted to use the Pondini B6 troubleshoot to reconnect my backups via the terminal (http://pondini.org/TM/B6.html), however upon attempting to execute the "sudo tmutil inheritbackup" command I received the following error message:
    The backup "I***Mac" can't be inherited because it would conflict with "I***’s MacBook Pro" (with I***Mac being the name of my old laptop and I***'s MacBook Pro being my new one).
    Does anyone have any suggestions? Should I just wipe my backup HD?
    Thanks so much

    It helps!
    After this:
    sudo tmutil delete "/Volumes/Time Machine/Backups.backupdb/Computername 2/"
    sudo tmutil associatedisk -a /Volumes/Mac\ HD /Volumes/Time\ Machine/Backups.backupdb/Computername/Latest/Mac\ HD
    I was able to go into Time Machine and see the backups that were in Computername that I hadn't been able to see via Time Machine (but could see from the command line).
    And then I deleted a folder in TIme Machine (a profile inside ~/Library/Application Support/Firefox and the entire old backup in /Volumes/Time\ Machine/Backups.backupdb/Computername/ was deleted.  Perhaps fat fingers?  I dunno.  I have a volume copy of the Time Machine volume, so I'll try again...

  • I'm trying to upgrade 9.0 academic version to 9.1.7 to use on a new MacBook pro.  When I try to do incremental upgrades to 9.0.1 or 9.0. it says I don't need them.  When I try to upgrade to 9.1.7 it says there is no version eligible to upgrade.

    I'm trying to upgrade Logoc Pro 9.0 academic version to 9.1.7 to use on a new MacBook pro.  When I try to do incremental upgrades to 9.0.1 or 9.0.2 it says I don't need them.  When I try to upgrade to 9.1.7 it says there is no version eligible to upgrade. This all on the older MacBook currentlu running 9.0.  But I need to upgrade to 9.1.7 to transfer it over tp the new MacBook w/ Retina display.

    I think I just got it.  I had the actual Logic Pro.app in a folder called Logic Pro inside the applications folder.  When I moved the actual app out of the folder and into applications it worked.  I am in the process of updating now.  However it seems a little strange because that's how it installed from the discs - into a folder named Logic Pro within the applications folder.  I would never have figured that out on my own.  So thanks for those who posted solutions to other users similar requests. 

  • Problems migrating my Win XP Pro laptop to new MacBook Pro

    My new MacBook Pro arrived this week a few weeks after the VMWare Fusion 2.0 software, both purchased online from The Apple Store, and I started the process of porting my Win XP Pro Dell laptop to the new Mac using VM Ware Converter and Fusion. The migrated PC virtual machine won't boot up on the Mac. A pop-up message from that VM said Windows is shutting down because it says it's incompatible with the SCSI drivers inside the virtual machine, which appear to be installed by VM Ware:
    Your guest operating system is Windows XP and you have one or more virtual SCSI devices installed in your virtual machine.
    Please be aware that Windows XP does not support the BusLogic SCSI adapter that VMware Fusion currently uses for its virtual SCSI devices. If you have not done so already, you will need to install our driver in the virtual machine. You can download the driver from our Web site at "http://vmware.com/info?id=43".
    Click OK to continue or Cancel to abort.
    -- I can only start up Windows on the VM in Safe mode, which won't accept the installation of VM Ware Tools, which I assume is what can install this driver easily on the VM. I tried to uninstall the SCSI drivers inside Windows and reboot the virtual machine, but it didn't take. I then tried redoing the VM conversion from the Dell and selecting Install VM Tools from the get-go; that only had the effect of blowing my entire Sunday night, as the conversion takes about 2 hours.
    -- That link above from the error message isn't to a page for the exact driver required; it just takes you to the generic home page for downloads of ANY VMware product. I also tried to look for a driver to download from the Web site onto the source machine, but the docs and directions and software seem to be geared to enterprise customers. I'm just sitting here in my pajamas at the kitchen table; I don't have servers, or floppy drives, or understand half of the vocabulary. I'm not even exactly sure what the "host computer" they talk about is in this scenario -- the source machine? The destination machine that hosts the VM?
    I also posted this at VM Ware's forums -- but I'm throwing it out here too in case other new Mac users are having issues like this one and have any advice. I'd like to use the Mac as both a Mac and a PC and would hate to have to just run it as a Windows machine with BootCamp, but it's looking like that might be the way to go unless I can unsnarl this issue; I hear that Parallels isn't any easier to deal with, but that might be also something to try.

    Actually, Apple does not sell VM Fusion. VM Fusion is a product of VMWare. You purchased it from an Apple Store that included it in the sale. This was provided by the store's manager, not by Apple. Apple itself does not sell VM Fusion nor include it with any computer sold on the Online Store. Apple provides no tech support for any third-party products, not even those included with pre-bundled software such as Quicken.
    There is no VM Fusion forum that's part of the Apple Discussions although there is a Windows forum and a Boot Camp forum that provides support for Boot Camp which is a part of OS X.
    If you need VM Fusion support your best bet is to visit their support forum. Same for Parallels Desktop for Mac.

  • Help with 'disappeared' photos after migration to new macbook pro

    So I got a lovely new macbook pro and successfully seem to have migrated everything from my old G4 powerbook. But, when I go into iphoto all 3,000 plus pictures have only the slash dotted outline and no images. Any suggestions as how to remedy this. Terence Devlin, you were kind enough to try to help me when I was having trouble with getting my pictures to export edited but we never did figure out the problem, so if you're out there and remember me maybe you can advise me here, as I don't know if anything I did in attempting to resolve that issue would impact the situation now. The pictures still exist on the other computer so it's nothing dire but it's weird to have everything look like it's there (in otherwords, the whole thing is set up exactly as my old one was, with the same albums etc.) but no actual pictures inside.... Thank you!!

    To anwser my own question:
    Had to highlight my User Home in finder, and then had to add myself as a user (and click the cogwheel to apply to all files within) and allow myself to 'Read and Write' in permissions.
    For some reason, when I migrated across, it didn't add me as a user - even though I was the administrator of both the old and the new MBP!

  • New Macbook Pro delivered today

    My new 15" MBP IC2D is being delivered today. It is replacing my old Powerbook G4, which has passed on to the big processor in the sky.
    Any tips or hints I should know?
    Tonight I'll have to:
    Install the extra gig of ram I ordered.
    Transfer my itunes library over from either the external HD or my ipod. (will I have to de-authorize the old 'puter?)
    Install Logic Express 7.2
    ...more music software to come but starting with the basics first. It's been expensive upgrading all my music software to run this new machine.
    I already purchased one of those incase sleeves to protect it when inside my bag. I found a cloth to protect the screen from the keys for the 13" MB, but not for the MBP. Is there one out there? I've heard the keys still leave marks on the screen similar to my PB. Are there any other useful accessories you might recommend?
    Any recommendations to welcome home the new girl are appreciated.
    Thanks.

    Congrats on your new MacBook Pro! Enjoy.
    Something that I did when I first bought my MBP was buy an external Firewire HD and SuperDuper! Start by configuring your MBP to work with your home network so it can connect to the internet and set up your user accounts, but do NOT transfer anything from your old Mac or install any new applications. Then partition the external HD so that the first partition is big enough to hold what's on your Mac HD and clone it, using SuperDuper! to the external HD. Now, go ahead and install your old data and applications to your MBP. Finally use the second partition as a way of backing up your Mac HD as you upgrade and add applications to your computer.
    I did this to my MBP so that as I install applications and transfer my stuff, I have a copy of my OSX as I got it from the factory configured for my network. Also, I can backup my Mac HD to the second partition and update it as I do more stuff with it. I backup my MBP before I make any updates or installations, so if something goes wrong, I can boot from the external HD configured as it was when I bought it, so I know that works, then I can restore from my most recent backup that's on the second partition.
    It minimizes my downtime and allows me to return the MBP to a time when I knew it worked properly in case I need to troubleshoot any problems.
    To some it might seem extreme and a little expensive, but ask anyone who has had a computer fail, having a way to return the unit to a known good version of the OS will make it MUCH easier to see if you have a hardware or software failure.
    Good luck and enjoy tour new MBP. I am having LOTS of fun with mine.
    Gerry

  • Brand new macbook pro 2012 (no retina display) 95% battery health with 5 cycles? is that okay?

    I know, another battery related question. I have recently bought a brand new macbook pro (no retina display), I calibrated the battery at least twice since Ive had it and it states that I am at 95% battery health with only 5 charges. Is that normal or should I bring my macbook in to be checked? Id like to get this settled before school starts in September since I depend on my macbook a great deal.
    thanks !

    Full cycle? 100%, of course.
    How you get there is another matter. It can be a battery killing full discharge that will certainly ensure a brief life. Or a leisure set of discharges down to 20%, 30% or more. When they all sum up 100%, winner! You've got a cycle!!
    Apple recommends you enjoy your Mac and don't obsess too much on battery stuff. Just exercise the electrons every so often by bringing it down to, say, 20% and charge it back up. Going all the way down to the bitter end, when the Mac forces itself to sleep is sort of ok too and won't do (too much) damage, provided you don't make it an engrained habit. We all forget the power brick occasionally and get caught out in the wild with whatever charge was left inside.

  • New MacBook Pro user trying to install Firefox

    I just got my new MacBook Pro (I'm really a PC user) and I am trying to install Firefox. I download it, get the install file (.dmg) that automatically unloads onto my desktop. I then get a disk drive icon labeled Firefox that only gives me the option to Eject. How do I install Firefox?
    Any help is appreciated.

    Double click the disk drive icon, inside you will find the installer .pkg
    .dmg is a disk image file it opens as a disk and mounts on your desktop.
    ..... as Mudcrutch99 sayd, we happened to reply at the same time
    Message was edited by: Pr0digy V.

  • New Macbook Pro with old Macbook HD

    Is it possible to upgrade to a new macbook pro and use the old HD from my current macbook. I would like to get the performance upgrade without having to reload all my programs and other things. It will also make it easier to put the new HD from the new macbook pro into the old mb and have it as new without my info inside and have all the latest software installed and clean. Also , what is the max amount of memory on a 15" mbp.

    The OS version being the same is irrelevant - the hardware is different. One example - your new MBP has dual graphics cards. The 'old' OS won't support that, because the hardware wasn't present on the old machine, so necessary components (call them drivers if you like) weren't installed.
    To be blunt, if you swap the drives or clone over the old system, you will have problems. You can do that with _the exact same model_ but not an older one.

  • I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?

    I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

Maybe you are looking for