Drive 2.1 can not connect to our cs3 versioncue server what do I need to use our projects in CS5?
Mac XServe is our CS3 server. Trying to upgrade to CS5 and found out Version Cue is no longer. Read and found the Drive 2.0. It can't seem to connect to my current server. We still have access with one of our CS3 machines. Is there a program I need to get to continue on with our versioning and the ability to use our projects we have? Or do I need to go into every project and export or something to be able to start using CS5? Thank you in advance for any help!!!
sunnovagun!
Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
Probably didn't hurt though to reboot the entire network...
Similar Messages
-
Hello, I can't no longer received emails in my Ipad, it says it can not connect to the servidor... what can I do ?
Have you ever been able to recieve emails on the iPad and on that Wi-Fi network?
The quickest and most likely fix will be testing on another Wi-Fi network.
If that doesn't do it, give this a shot -> iOS: Unable to send or receive email -
I need to sync to itunes to seach for updates for my iphone 4. I have had a new SIM card and the phone does not recognise it (yes it is on the same network). In settings there does not appear to be a 'carrier' option. Apparently thi is quite common and all I need to do is update through itunes.
Itunes or my computer is not recognising my phone at all. What do I need to do? I have not sunced with this computer before eitherHello there jlc86,
I would recommend this troubleshooting article named iPhone not appearing in iTunes found here http://www.apple.com/support/iphone/assistant/itunes/.
All the best,
Sterling -
My doughter borrowed my ipad and tried to guess the code.... and now it is locked. It says that the ipad has been deactivited and I shall connect to itunes. And that SIM is locked. WHen connecting to itunes it can not find the ipad as it is locked.... and I need to unlock it. But I can not do that..... Anybody?
You will need to Restore your Device...
Restoring your iPhone, iPad, or iPod touch
http://www.apple.com/support/ipad/syncing/ -
Can not connect to a remote SSH server with my mac
Ok have tried 4 different applications, fetch , captain ftp, terminal, etc.
I am trying and connect to a friends ssh server to upload some file logs. I have the correct login/password, have tried both protocol 1 and 2. Port 22 is correct. I keep getting the error message
User logging error - captain ftp
SFTP connection to ..... could not be opened becasue the connection to the SFTP server could not be established or was lost - Fetch
sshexchangeidentification: Connection closed by remote host - Ternminal
We have tested it using Telnet and other programs on a PC and all is well.
When i try and connect he receives the message
Refused connect from cpe-"ip address"(ip address)
policy: HostKey/etc/ssh/sshhost_rsakey
Do i have a setting somewhere i am missing.1st, is the server behind a home router? Has port 22 been "Port Forwarded" from the internet side to the server's side of the router?
2nd, from a Terminal session use the command:
ssh -v -v -v [email protected]
The -v -v -v triplets will give you a wealth of ssh connection information. If you read through this carefully you may find the root cause of your problems (assuming the 1st step above doesn't yield results).
Another thing to consider, is that ssh will not make a connection to an account that it does not consider to be reasonably secure. This means that the home directory of the account and specific key subdirectories must have proper ownership and permissions, or ssh will not connect. The specific ownership and permissions needed and the files and directories checked are spelled out in the ssh man page
man ssh -
Apple software server says I am not conneted to the internet and I am. I need to update software on my iTouch.
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any.
5. A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273 -
Leon a Já instalované Time Machine nefunguje. na Letiště Extrémní je připojen MyBookWorld II. Sníh leopard s vše pracovat. Leon vidí pohonu, ale nemůžete se k němu připojit. nemůže být viděn v disk utility.
Děkuji za Vaši pomoc nebo rady
PetrHere's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious. -
I purchased a new router and now I can not connect to my time capsule. What should I do?
In the past, I have just used my time capsule to back up my macbook pro. It connected wirelessly and everything worked great. I recently purchased a new router and now I cannot connect to the time capsule. Please help!
Is that other router the "main" one? If so, you'll have to configure the Time Capsule to "join" the network created by that router. The details of how to do that and whether it's possible may depend on the brand and model of that router, but I have no details on that.
-
HT201210 can't connect with ipod software update server, what should i do?
i tried to update my ipod but whenever i try i get the message [the ipod " " cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable] my ipod is stuck in recovery mode, what to do?
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
Intel pro wireless card can not connect
Since some weeks, i can not use my wireless network, it does not associate the access point.
The cared is a intel pro, using the agn driver.
I can not connect to my wep key protected home network, or public, unprotected accesspoints.
I tried various parameters with iwconfig, without success, so I assume the kernel module is broken.
Any help would be appreciated.B wrote:
sredna wrote:Yes, I read the wiki page. Yes, everything is installed. It worked for a long time. I read the various manuals. I do it the correct, recomended way. It just does not work.
Rather than blaming devs for putting out faulty software, if I were you I'd look at myself - the PEBKAC problem . So an upgrade broke it. When was this? What packages where upgraded? Check your pacman log (yes, it exists).
You are aware the module name for Intel's wireless cards changed? Instead of referring to the card model it's now iwlcore and iwlagn. But then again, if you let udev figure it out, there shouldn't be the slightest problem in that upgrade.
Care to share any of your cherished errors? Without them there's not much we can do. The BBS has been out of crystal bowls for a long time.
Dear mr. B, I do not blame anybody anything. I report, as is, it does not work. On my system, in the hope that someone have something meaningful to say, not because I hoped for you to call me names. I do not know what your acronym means, and I do not wish to find out, since it appearently is there to make me less. I do not care for that.
The kernel modules that are loaded on my system, and was back when I had working wifi support, are iwlcore and iwlagn. I do not know that the iwlwifi-4965-ucode package is used for anything, I installed it because the before-mentioned wiki page recommends that, and I did get working support. I do not try to configure it by hand, I trust udev/hal/whatever is there to handle the hardware.
But, sorry for repeating, since some time, I can not connect to an access point. No matter if I try cli commands or use wicd or networkmanager applets. The result appears to be the same, there is no error from iwconfig, which does not succeed.
I can't even remember the date it went wrong, but i know that the kernel was updated as a part of that particular update. rolling back the kernel did not help though. -
apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
My MacBook pro can not connect internet
My MacBook pro can not connect Internet
Um okay. And? What have you done to try to fix it? What error messages are you getting? Do you use WiFi or Wired connection?
-
10.6.8 MBPro Screen Sharing suddenly can not connect to our other Macs.
We've used Screen Sharing from our MBPros for the past few years to manage our Mac file & media servers. Last year we replaced our G5 file server with a Mac Mini with Lion server. No problems - we could still use Screen Sharing to manage both this Lion file server and the Snow Leopard MacPro that's hooked up to our TV (among other things).
Friday morning my MBP could not see or connect to the Lion file server - the MBPs have the Lion server's data drives in Login Items so they mount when we log in. I also cound not Screen Share to either the Lion server or the SL MacPro. I checked the MBP's ethernet connection and could get to our router and the internet. When I tried to connect via Screen Sharing (by using the Share Screen... button in a Finder window, by using the Connect to Server command with vnc:// protocol, or by using the ScreenSharing menulet) I would get the "Connecting to Lion server" alert but nothing further. I left it for 10 minutes or so and it eventually disappeared but the connection never opened.
I checked the two servers and both were up and running. From the SL MacPro I could use Screen Sharing to get to the Lion server - and my MBPro too. From the Lion server I could Screen Share to the MacPro and my MBPro also.
The problem appeared to be with my MBPro. I switched to an unprivledged user account on it and found I could then get to both servers using Screen Sharing. So it was just my account on the MBPro. Rebooting did not help. Turning on AirPort, connecting to our home AirPort Extreme and unplugging the ethernet cable did not change anything with my account connecting to the servers.
I figured something somehow got pranged in my account's credentials. I used Keychain Access to delete all keychains containing the servers' names, IP addresses or sharing. I was asked for my credentials when I mounted the server's shared drives, but not when I tried Screen Sharing - got the same "Connecting to Lion server" or "Connecting to media server" dialogues and was never asked for username or password, but never connected either.
I cleared all caches using the utility Maintenance in case my MBPro was using invalid cached info. No improvement.
Saturday morning I shut down everything on our entire network - FiOS "modem"/router, Netgear gigabit switch, AirPort Snow, AirPort Extreme, MacPro, MacMini, both MacBookPros... even the FiOS cable box. Still no improvement.
IPv6 is disabled on the Lion server. All the Macs have all curent updates applied.
I've spent most of today Googling for solutions and trying them out. None have worked - though I see several very recent reports in these Apple Communities about Screen Sharing suddenly not working.
I really do not want to have to move to a new account on my MBP - and what's to say it won't happen again? Anyone have other suggestions?sunnovagun!
Hitting the Log Out button in the MobileMe panel worked. I can now connect to both the SnowLeopard and Lion servers just like I used to.
My condition appears to have been slightly different from yours, gmia - the MobileMe on my MBP had the correct info, but hose are not the credentials i use to remote to the two servers. I'm guessing that for some reason ScreenSharing began using my MobileMe credentials instead of what I had saved in the keychains.
Wonder if it had anything to do with the shutdown of the MM servers. That would be odd as using ones apple ID to log into a Mac remotely was new with Lion, and I had the same problem with our SnowLeopard server - which I remote into much more frequently.
Probably didn't hurt though to reboot the entire network... -
I have a disconnect between my external hard drive and lightroom 5.6. The recommended steps do not connect 11000 photos on the hard drive. How can I connect? I am concerned I have lost my edits in lightroom.
after some sorting out your article, I clicked on a question mark with the message find the missing folder. This brought me to a page where I could choose a folder by year and click on it. The question marks disappeared and the photos were available. In some cases I had to click on the year folder for each subfolder by date.
The find missing folders message did not bring me to the finder window in which I could click on folders in the hard drive itself. I appreciate your help big time!! -
I have tried all the troubleshooting tips from the website and we still can not connect our ipad or mac book......it is so frustrating...........
Have you tried posting a question in the correct forum?
Appletv one instead of the iPad one?
Maybe you are looking for
-
Hi all, I've a few questions on MIDP security to seek help: 1) Suppose I have a midlet to store confidential details on the mobile phone, if it doesn't make any connections to the internet, would anyone be able to retrieve the information I'd on the
-
Upgrade R/3 4.7 110 from SQL 2000 to ECC 6.0 /SQL 2005
Dear Experts, We are currently running R/3 4.7 110 with kernel 640 32 Bit Non Unicode on Windows Server 2000/ MS SQL 2000 Platform. We are planning to Upgrade the same to ECC 6.0 on Windows 2003/ SQL 2005 on New x64 Bit Hardware. I was earlier planni
-
Can't send MMS on O2, 4.2.1 - iPhone 4
I am having problems with my iPhone 4 not being able to send MMS, on contract with O2. It is only less than 2 months old. The guys at O2 have no idea why this is happening as all my settings are correct, even the Apple tech guys are at a loss... coul
-
8.0.1 has broken Content Link in Piano Roll Editor
Logic 8.0.1 has managed to break Content Link in Piano Roll Editor... Select a MIDI region in Arrange, choose a Screenset for Piano Roll and, with Link active, you'll see the contents for the selected MIDI region. From that point on though, you'll on
-
Hi , I want to re-align the columns in a matrix in the form. for ex: i am adding one column in the existing matrix i want that column to be displayed in the first position. How to do that? Regards, Kughan.