Drive does not read blank DVD's (but reads all else)

I have a set of DVD+RW's and DVD+R's that when I put them into my drive, they do not pop up on my desktop. When I insert blank CD's, they work, and when I insert music CD's and movie DVD's, they all work too.
But the wierdest part is DVD Studio Pro will burn to the blank DVD's, even if finder doesn't see them.
I have my defaults set to "open in finder" for new disks. Any idea why this ain't workin?
I got the default CD/DVD drive that came with my mac

UPDATE: After hours of searching and reviewing this problem, it appears it may be due to third party burning programs, however this poses another problem. My laptop came with Roxi EMC 8 which i removed some time ago, it appears using other third party burning software causes comfilcts which may be causing my problem. I contacted Roxio but they have taken the "we are not able to help" stance due to the software being an OEM and came with teh laptop and they say I need to contact HP, which i obviously have with no success so far. Due to me removing Roxio and not having a disc to reinstall Roxio to see if this corrects the problem (and at this point i would just use the Roxio software reluctantly just so i can have my laptop back) I am stuck and it appears no one knows anything on how to fix it, Roxio will not help but I am hoping HP will since according to Roxio, this needs to be supported through HP. HP, can you please help me, i cannot use my CD/DVD drive most of the time and it appears you are my only hope. Here is what i got from the Roxio website about how it needs to be handled by the manufacturer, in this case HP: "If you have an OEM (original equipment manufacturer) version of Roxio software, please note that it is supported by the vendor that bundled or installed the Roxio product with their hardware or software. For more information about OEM support policies, please read the article What is OEM software? " Please help HP, you have to have an answer to this, is there a place I can download the Roxio software that came with my laptop or is there a Roxio Uninstaller that would completely remove the program as there are bits still threre, my laptop is a HP DV7-1245dx. please help.........

Similar Messages

CD/DVD drive does not read all DVD formats and regions

Hi
My Teac-dw-224e-a does not read all DVDs formats and regions.
It does read CDs but no DVDs at all.
Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
I have reinstalled the driver and also tried with different software.
What can I do?
Please help!

Hi
It is possible that your DVD drive has wrong region settings.
In this case it is not able to watch all possible DVD movies from different regions.
Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

Equium P200 - DVD drive does not read all discs

My DVD Drive has just started reading some discs and not others, also some of the discs are not read all the time, you can put a disc in click on the dvd drive and it'll open the drive and say insert a disk, device manager says device working properly and driver upto date.
Does anyone know what the problem is?

Yes, terentino is right. Would be helpful if you could tell us which discs exactly work and which not. Maybe that would give the answer.
Did you installed more than one burning application? Sometimes several installed burning applications could interfere with the other one since every application installs some kind of libraries with their own burning/driver engine to control the functions of your drive.
bye

MY DVD drive does not read all DVDs and also does not burn CDS properly. Often while burning a CD i am prompted that " The machine is unable to caliberate teh required Lazer Power"

Hi i am having a i MAC which has mountain lion OS 10.8.2. I am facing teh followwing issues with my disk drive
1. I am unable to read all DVDS in it some DVDS work while others do not
2. I am able to read all CD's, but while burning a CD i am prompted with the following message
" Unable to caliberate lazer power"
3. Kindly assit me in solving this problem
regards

Hi
Four thoughts
• Brand and type of DVD/CD Media
• Burn Speed ?
• Ever used a Cleaning DVD ?
• Free space on Main Start-Up Hard Disk ?
Brand and type of DVD/CD Media: MATTERS
- Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
I only use Verbatim
- DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
I only use DVD-R
Burn Speed (in iDVD or alike): Matters
• Best or Max - is not best
I set it down to x2 or x4 Max
Ever used a Cleaning DVD ?
I use one WITHOUT Liquid but with brushes from time to time
Free space on Main Start-Up Hard Disk ?
- Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
Yours Bengt W

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

Tecra M5: DVD drive does not read these mini DVDs

I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
Any suggestions?
Why its messedup?

Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
Try the solution from sascha. Maybe youre a lucky man and it works.
If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
Then shuts down again, put the drive into the notebook and boot up the unit.
The notebook should recognize the drive and should indicate the firmware again.
Im not sure if this will help you but its attemptable

My external Iomega DVD drive does not read DVDs. Why?

My external Iomega DVD drive does not read DVDs. Why?

what does this question have to do with a mac? post in the Iomega fourms.

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

DVD drive does not recognize blank media

I have a Matshia DVD-RAM UJ-841S DVD drive, that will not recognize blank DVD media. This has been going on for a while now, so I don't know 'what has changed'. It will recognize/burn CD's, will play DVD's, but will not recognize blank DVD media. I have tried reinstalling the driver, tried different types of high quality media (Verbatim, Memorex etc). I have burned many DVD's in the past, this drive is (was) capable of doing it (despite what Microsofts FixIt programs says). I'm not terribly techy, so if it is a registry problem you'll have to explain it very carefully.
Thanks,
Rodney

I HAVE BEEN HAVING THE SAME PROBLEM. I CAN BURN TO MY COMPUTER - COPY A DVD - BUT CAN'T COPY TO A BLANK DISC AND HAVE TRIED ALL KINDS OF MUSIC DISC???
NEED HELP ALSO.
SHAROON

Dvd drive does not read dvds

my laptop does not read dvd disks but its able to read some cd disks.
what should i do

Are there any discs that it can read?
Try looking at this article.
What can I do if my CD or DVD drive doesn't work properly?
- Peter

SD-L622A CD/DVD drive does not read some CD's - Satellite L300-144

Drive TOSHIBA SD-L622A.
The drive does not see boot CD with Windows XP Service Pack 3, some of boot CDs with diagnostic utilities (IMHO 2CD format).
Also these CD does not seen by drive even under Windows XP, Vista.
To My wife has bought Toshiba L300, but another modification. There there is drive Matsu****a (Panasonic).
Problems with the same disks has not arisen.
PS Sorry for a terrible English. My native language is Russian :)

In the first topic I wrote
..+The drive does not see boot CD with Windows XP Service Pack 3+..
I have taken other disk from my friend - the situation has not changed.
Installation Windows XP SP3 has a success only after copying the distribution kit on removable HDD and manual install Windows from command prompt
But I think its abnormal.
I think, the theme can be closed because this question should be addressed to Toshiba's fimware developers
+If you cannot use “some CDs with diagnostic utilities” maybe are the problem those CDs. For me it is not so dramatic issue. if you can use all “commercial” medias everything must be OK.+
May be.....but I have bought two notebooks Toshiba in a day for Me & My wife.
On my wives notebook all the above-stated disks playing normally, but it has another drive by Panasonic (Matsu****a)

The lightscribe DVD drives does not read media. Attempted software upgrade to no avail. Error.

The drive would not read media regardless of type or format of CD/DVD. Downloaded and attemted lightscribe DVD software upgrade; however, during installation system generated error stating "InProc Error". Something in programming of upgrade (get file...).

You may want to try this Microsoft Fix-It.
What can I do if my CD or DVD drive doesn't work properly?
You could also try using System Restore to restore a previous restore point from before this became an issue.
If that doesn't work, you could try a recovery. Recovering your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system recovery will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide. On most models you can hold '0' (zero) with the computer turned off. Then press the power button while continuing to hold '0' until the recovery utlity starts.
- Peter

Ibook does not recognize blank DVD - profiler looks suspicious

I have an ibook g4 1.42GHz running OS 10.4.11 purchased used about 10 months ago.
All of the literature says it should have a SuperDrive which should be able to burn DVD (SuperDrive DVD±RW/CD-RW). However I cannot get it to recognize a blank DVD. Plus iDVD brings up a message saying "your macintosh does not have a supported Superdrive...you will not be able to burn a dvd"
Doing some digging, the System Profiler looks like it thinks i shouldn't be able to either:
MATSHITA CD-RW CW-8124:
Firmware Revision: DB0D
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: No
Says nothing about being able to burn dvd?
I am not aware that this model ever came NOT able to burn dvd. The only explanation i see is that the person i bought it from may have had it refurbished for some reason and they put in the wrong optical drive? Is that possible?
Or does anyone have any other explanation or fix?

Hi
What you mean exactly? Does the drive does not recognize content on the media or there is problem if you want to burn data on DVD-R media?
Can you please explain all this a little bit more preciously?
Just for info: I use TDK empty medias almost 5 years and I can say that TDK is very good manufacturer for this stuff.

DVD drive does not recognise CD/DVD

Ok. SO recently my G42-230US notebook computer just does not play CD/DVDs. The drive opens, the green light appears on the side but when I go to my computer, my DVD/CR ROM drive does not appear. Can I get some help with this problem?

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive is now working.
If the drive is still not working, from the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IBook G4 Combo Drive Does Not Read CD's - But Reads DVD's

Since about a week ago, my combo drive has not been able to read any audio or data CD's. However, it remains able to read and play DVD's. When I insert a CD into the drive, it would either automatically eject itself, or remain in the drive without being recognized by the system. After inserting a CD, I can hear the drive making noises indicating that it's trying to read the disk.
If anyone has encountered this problem, how can it be resolved?
Thanks.

I had 8 CD-RW disks backing up iTunes and wanted to update them so I erased them to start over. Afterwards when I tried to use them each and every one was useless-my iBook was telling me they were unreadable. I Googled this problem for quite some time without finding a solution. People were actually replacing their optical drives. Anyway I found my own solution, figuring that the combo-drive was ok since it was reading all my DVDs and other CD-RWs. I opened BurnX, popped in the unreadable CD, but before the warning box came up I clicked on erase to erase the already erased CD. This prevented the warning box from coming up and the CD ejecting. Next I burned a small file onto the CD-just any old file-actually a short TextEdit document, then I erased that. Also I made sure that the CD was not apendable. It worked! I then did the same with all the other CDs that were unreadable after having erased the iTunes backup from them and was ready. I began the backup procedure and was afraid that it was going to tell me what I had forgotten to mention earlier, that the disk was not blank when I knew it was, but it didn't and they all worked fine. The backup was a success and I had found the answer to a problem that apparently many people have had over the years. Hope this helps.

Drive does not read blank DVD's (but reads all else)

Similar Messages

Maybe you are looking for