Drive error at end of Burn

I keep getting an error that reads
drive error
sense key=illigal request
sense code = 0x30, 0x05
cannot write medium
incompatible format
After many burns I get this error, when there is only one second left on the burn. Then I check the disk and it can still play but at the very end it freezes. HELP, I can't get my work done and I do this for a living. It even happened when I burned at 1x.
Thanks, Pamela

What is it exactly you are having trouble with. by that what are you trying to burn. Audio, Video, Files,
What are you trying to use for Software..iTunes..
Disk Utility, Toast, etc.
Are you choosing the content from the pop-up or are you dragging and dropping.
Have you changed the Raw Media you are using?
What media are you using, Brand and Format.
If you do a lot of burning have you trashed the files and content after the burn and have you emptyied the cache files and shut your computer clear off afterwards, waited for a time and then restarted and tried again, This will work sometimes.
I have found that after doing a lot of burning, it is nessecary to use 3 free utilities to clean everything up to be able to go again without causing error messages.
Macjanitor.
http://personalpages.tds.net/~brian_hill/downloads.html
Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
Onyx
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
If this version of Onyx is wrong for you go to google and get the right one.
running these should make your problems go away if it is not Media related.
Don

Similar Messages

Burning in iDVD 08; Multiplexer error at end of burn?

Burning in iDVD 08 (vers. 7.1.2), came with new iMac, late June 2011.
This is a project with (3) iMovie projects, on (3) DVD-9 (i.e. Dual-Layer) disks, encoded to Professional Quality for replication.
Disk 1 burned fine, has 220 min of content, 8 video presentations. Tested OK on TV and PC.
Disk 3 also burned OK with 217 min of content, 8 video presentations. Tested OK on TV and PC.
Disk 2 gives repeated errors at end of burn (i.e. - after 3.5 hours of burning).
Multiplexer error; for more info, see XXXXX, which is totally irrelevant doc re: encoding.
Bengt W, have read through your excellent long list of possible problems in reference to burning problems, made a few changes, cannot find any thing else to change.
Here is what throws me.
1. Disk #1 and #3 burn without problems, with similar theme, drops, text and titles, longer content.
2. Disk #2 burns OK with only one of the video presentations. But gives multiplexer error with 4 video projects.
3. Am using Memorix DL disks, but worked fine with disk #1 and #3.
4. Tried 5 times (5 different disks) to burn; all failed at end he same way. Been working on problem for 3 days.
5. Cannot reach Apple Support. Express Lane not working. Feedback line not working -"server error; try again later" from apple.com. Phone service seems unavailable and they do not list hours for phone support. Quite frustrating. Have searched Apple Support Comminities for different descriptions of this problem, and also Google search, etc. without any success.
Other related into. Using new Intel iMac 21", Snow Leopard ( 10.6.8),
Most grateful for ideas into this problem and promise to bow down in respect to anyone who can help me solve this problem.
Thanks in advance,
Michael

Hi
• Memorix DL disks - Usually a problem maker - If You have a Verbatime - try this - else
a. Set down burn speed to x4
b. secure a minimum of 25Gb free space on Start-up (Mac OS) hard disk - others can't take this task
• There are three major things (as I get it) that give Multiplex errors
a. Use of strange material eg .avi, .wmv, .mp3 etc
b. Using other letters than A to Z and 0 to 9 - in titles and sub-titles eg / usually can give this
c. Turn on TV-Safe area in iDVD and secure that no button or object goes beyond this or even touching it.
My first thougts
Yours Bengt W

Unable to burn cds. Have run diognostics. i tunes not running in safe mode. invalid lower filters registry value. Failed while scanning for CD/DVD drives, error 2500. Please help.

Unable to burn CDs using i tunes. Have run diognostics.    Summary:-   i tunes not running in safe mode.
                                                                                                                                    Invalid lower filters registry value.
                                                                                                                                    Failed while scanning for CD/DVD drives, error 2500
Please help.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

"Errors found during the burning process"

Hello,
I created an iDVD project that includes:
1. 108-minute movie
2. 6-minute movie
3. 3-minute movie
4. 12-minute slide show (3 four-minute slide shows)
The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
Larry

Larry,
Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
#0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
#1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
Check the list on this download:
http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
But here are easy solutions IMHO:
Get free space on the startup drive -20GB recommended
Delete the iDVD plist file com.apple.iDVD.plist
Repair Disk Permissions
Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
Chapter Markers - don't put one at the end.
Chapter Markers - don't put one within 2 secs of a transition
Delete other corrupt preference files (try using Preferential Treatment)
#2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
Finally try reinstalling iDVD.......
If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
john b

Recurring Hard Drive Errors/Crashes After Replacing Repeatedly

I've got a 2007 2GHz Macbook. I've been having repeated hard drive errors for the past few months. First the original hard drive went 100% dead. I replaced it with a Hitachi 350 Gig. After repeated serious hard drive crashes and reformats, I replaced it again with a brand new Western Digital 350 Gig hard drive. However, I am having continued problems with this one now, Invalid Extent entries every couple days, and major errors if I don't run disk utility every other day.
This is leading me to believe that the issue isn't related to the hard drive since I've had similar problems three times in a row. Has anybody else encountered this? Could the problem be elsewhere?

+I'm assuming that's a bad ram module, am I correct?+
Perhaps, but I'm sorry to report there is much uncertainty about this. See the search of these boards I've added at the bottom, and refer to each listing and its resolution (if reported).
There is usually a "Details" section of the Apple Hardware Test report about the memory - did you see that section of the results?
If not seen, or if it was not reported, open the utility "System Profiler" and look at the "Diagnostics" section to see general results of that last AHT which you ran, and also you should see there the latest results of the "Power On Self-Test" that runs each time a Mac starts up. The normal "Result" for both lines reads: "Passed"
Also check the "Memory" section of System Profiler to see the size, type, speed and "Status" of each individual memory module - your MacBook should have two modules in it, and the "Status" report for each should be "OK"
If your Mac is not covered by AppleCare, it's probably best to use a process of elimination to find the source of the problem.
Are you using your MacBook without an external keyboard and mouse? Those might possibly be the cause of a problem, if connected.
As long as you have the original grey-label Install Disc in the optical drive, your MacBook will startup without a hard drive inside, as the Install Disc contains all the operating instructions that are necessary for the MacBook to operate the Install Disc and everything on it.
It is easy to remove the internal hard drive to eliminate a potential problem source. If corruption of the hard drive is a repeated issue, it would be best to eliminate this hard drive from the mix for testing purposes.
Just as important, as long as you have the original grey-label Install Disc that contains the AHT, the MacBook will startup to the Apple Hardware Test by pressing and holding the d key, again without a hard drive installed.
It is very easy to remove RAM modules from a MacBook for visual inspection to see what markings are on the labels as to size, type and speed. Verify that System Profiler is reporting the same info as is marked on the labels.
Assuming everything is as it should be, replace one module, close up the Mac, and after starting up to the Install Disc, check what the utility "System Profiler" is showing in the "Memory" section of its limited System Profiler. If the Mac starts up cleanly and System Profiler reads "OK" move that module to the other memory slot and same procedure.
If the Mac again starts up cleanly to the Install Disc and System Profiler again reads "OK" next startup from and run the Apple Hardware Test with only that one module to see if it gets a clean bill of health.
If it's ok, then remove that module and set it aside as being a tentatively "known good" module.
Repeat all on the second module by it's self. At this point, you should probably have learned which module is bad - however, if not, go through it all again with both modules installed.
Hopefully by the end, you will have determined a resolution that doesn't cost an arm and a leg to correct, such as replacing the logic board. Good luck with it:)
Message was edited by: myhighway
http://discussions.apple.com/search.jspa?threadID=&q=4MEM%2F4%2F40000000&objID=& dateRange=all&userID=&numResults=30&rankBy=10001

Error 2380 when starting burn please help

This error has been driving me nuts for 4 months now. Is anyone else having the same problem.
Here is what the CD dianogtic says:
Microsoft Windows Server 2003 family, Professional Service Pack 1 (Build 3790)
System manufacturer System Product Name
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: InCDPass (4.3.12.0), incdrm (4.3.12.0), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce 7800 GT\GeForce 7800 GT
IDE\DiskMaxtor7L300S0_________________________BANC1G10, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONDVDRW_SHW-1635S_________________YS0V___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomNEC_NR-7900A___________________________1.08___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive on -128(0xffffff80) media at speed 0X.

try this...i had a 4000 burning error, and this fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
Jr

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned

I am trying to burn an album from iPhoto '09 and I receive the following error message:
The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned data failed.
I have attempted 3 different times using the same media that worked prior to my upgrade to Snow Leopard. Prior to the upgrade I didn't have any problems.
Any help would be appreciated.

Same for me here...no luck with TDK DL DVD +R. Seems that this drive is extremely picky with DL supports (http://discussions.apple.com/thread.jspa?threadID=1181990).

ETL Tasks failing Database driver error...Function Name : Execute Multiple

HI,
We have Installed OBI Apps V796. Below are the details.
OBI Apps V796
OBIEE 10.1.3.4.1
DAC 10.1.3.4.1
Informatica 8.6.0
We are getting the below error for the task "SDE_ORA_PartyPersonDimension_Customer" when we run the execution plan related to supply chain and order management analytics.
Severity     Timestamp     Node     Thread     Message Code     Message
ERROR     6/23/2009 8:25:54 PM     node01_obiee     WRITER_1_*_1     WRT_8229     Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) ".
As a work around we tried by changing the Target load type option to normal(previously it is bulk) and still the task failed. Also tried by enabling the Constraint based loading option and still the tas got failed.
Any suggestions............
As
Regards
Venkatesh.

Exactly same problem I'm also facing. The log is not showing any exact error information for the cause. And the surprise thing is when i'm running the debugger its inserting all the records. But when i run the task it is failing. Here is the log.
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10.DATAWAREHOUSE.SDE_ORA11510_Adaptor.SDE_ORA_PartyPersonDimension_Customer_Full.log] for session parameter:[$PMSessionLogFile].
DIRECTOR> VAR_27028 Use override value [4] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint1].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint2].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$LAST_EXTRACT_DATE].
DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[$$TENANT_ID].
DIRECTOR> TM_6014 Initializing session [SDE_ORA_PartyPersonDimension_Customer_Full] at [Mon Dec 28 19:10:26 2009].
DIRECTOR> TM_6683 Repository Name: [AA_REPOSITORY_SERVICE]
DIRECTOR> TM_6684 Server Name: [AA_INTEGRATION_SERVICE]
DIRECTOR> TM_6686 Folder: [SDE_ORA11510_Adaptor]
DIRECTOR> TM_6685 Workflow: [SDE_ORA_PartyPersonDimension_Customer_Full] Run Instance Name: [] Run Id: [1371]
DIRECTOR> TM_6101 Mapping name: SDE_ORA_PartyPersonDimension_Customer [version 1].
DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
DIRECTOR> TM_6703 Session [SDE_ORA_PartyPersonDimension_Customer_Full] is run by 32-bit Integration Service [node01_obiee], version [8.6.1 HotFix6], build [0622].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [UNICODE]
MAPPING> CMN_1570 Server Code page: [UTF-8 encoding of Unicode]
MAPPING> TM_6151 The session sort order is [Binary].
MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
MAPPING> TM_6156 Using low precision processing.
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM error log disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [BIDB], user [AABAW]
MAPPING> CMN_1716 Lookup [Lkp_W_ORA_PARTY_CONTACT_PS] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [IIF(ISNULL(CONTACT_PARTY_ID||DATASOURCE_NUM_ID), '', 'Contact')]; transformation continues...
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [<<PM Parse Warning>> [||]: operand converted to a string
... IIF(ISNULL(CONTACT_PARTY_ID||>>>>DATASOURCE_NUM_ID<<<<), '', 'Contact')]; transformation continues...
MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_PartyPersonDimension_Customer_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Mon Dec 28 19:10:26 2009)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Dec 28 19:10:26 2009)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [DEV01], user [apps]
READER_1_1_1> BLKR_16051 Source database connection [ORA_11_5_10] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [BIDB], user [AABAW], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL INSERT statement:
INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL UPDATE statement:
UPDATE W_PARTY_PER_DS SET PARTY_TYPE = ?, FST_NAME = ?, FULL_NAME = ?, MID_NAME = ?, LAST_NAME = ?, DEPARTMENT_NAME = ?, CONTACT_ID = ?, CONTACT_TYPE = ?, FAX_PH_NUM = ?, PAGER_NUM = ?, MOBILE_NUM = ?, WORK_PHONE = ?, SEX_MF_CD = ?, ETHNICITY_CD = ?, MARITAL_STAT_CD = ?, BIRTH_DT = ?, BIRTH_PLACE = ?, DEATH_DT = ?, ST_ADDRESS = ?, CITY = ?, STATE = ?, ZIPCODE = ?, COUNTRY = ?, EMAIL_ADDR = ?, JOB_TITLE = ?, ANNL_INCOME = ?, CON_ACTIVE_FLG1 = ?, SUPPRESS_EMAIL_FLG = ?, PROF_TITLE = ?, STATUS_CD = ?, ST_ADDRESS2 = ?, ST_ADDRESS3 = ?, ST_ADDRESS4 = ?, CREATED_BY_ID = ?, CHANGED_BY_ID = ?, CREATED_ON_DT = ?, CHANGED_ON_DT = ?, AUX1_CHANGED_ON_DT = ?, AUX2_CHANGED_ON_DT = ?, AUX3_CHANGED_ON_DT = ?, AUX4_CHANGED_ON_DT = ?, SRC_EFF_TO_DT = ?, DELETE_FLG = ?, TENANT_ID = ?, X_CUSTOM = ?, CUSTOMER_NUM = ? WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL DELETE statement:
DELETE FROM W_PARTY_PER_DS WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_PARTY_PER_DS]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] User specified SQL Query [SELECT b1.party_id,        b1.party_type,        b1.person_name,        b1.person_first_name,        b1.person_middle_name,        b1.person_last_name,        b1.status,        b1.phone_area_code,        b1.phone_number,        b1.address1,        b1.address2,        b1.address3,        b1.address4,        b1.postal_code,        b1.city,        b1.state,        b1.country,        b1.email_address,        b1.date_of_birth,        b1.place_of_birth,        b1.date_of_death,        b1.gender,        b1.declared_ethnicity,        b1.marital_status,        b1.person_title,        b1.personal_income,        b1.do_not_mail_flag,        b1.created_by,        b1.creation_date,        b1.last_updated_by,        b1.last_update_date1 last_update_date,        b1.last_update_date2 last_update_date,        b1.last_update_date3 last_update_date,        b1.party_number,        b1.ACCNT_FLG FROM (SELECT              per.party_id,              pty.party_type,              per.person_name,              per.person_first_name,              per.person_middle_name,              per.person_last_name,              pty.status,              cnp.phone_area_code,              cnp.phone_number,              pty.address1,              pty.address2,              pty.address3,              pty.address4,              pty.postal_code,              pty.city,              pty.state,              pty.country,              pty.email_address,              per.date_of_birth,              per.place_of_birth,              per.date_of_death,              per.gender,              per.declared_ethnicity,              per.marital_status,              per.person_title,              per.personal_income,              pty.do_not_mail_flag,              per.created_by,              per.creation_date,              per.last_updated_by,              per.last_update_date last_update_date1,              pty.last_update_date last_update_date2,              cnp.last_update_date last_update_date3,              pty.party_number,              (CASE WHEN acct.PARTY_ID IS NOT NULL THEN 'Y' END) ACCNT_FLG,              MAX (per.person_profile_id) OVER (PARTITION BY per.party_id) max_person_profile_id,              per.person_profile_id       FROM hz_person_profiles per,            hz_parties pty,            hz_contact_points cnp,            (SELECT a1.party_id,                    COUNT (1) cnt             FROM (SELECT per.party_id                   FROM hz_person_profiles per                                      UNION ALL                   SELECT pty.party_id                   FROM hz_parties pty                                      UNION ALL                   SELECT --/*+ use_hash(pty cnp) index_ffs(pty, hz_parties_u1)*/                         pty.party_id                   FROM hz_parties pty,                        hz_contact_points cnp                   WHERE pty.party_id = cnp.owner_table_id                         ) a1             GROUP BY party_id) TEMP,            hz_cust_accounts acct       WHERE     per.party_id = TEMP.party_id             AND per.party_id = pty.party_id             AND pty.party_id = cnp.owner_table_id(+)             AND cnp.owner_table_name(+) = 'HZ_PARTIES'             AND cnp.contact_point_type(+) = 'PHONE'             AND cnp.primary_flag(+) = 'Y'             AND acct.PARTY_ID(+) = pty.PARTY_ID) b1 WHERE b1.person_profile_id = b1.max_person_profile_id HAVING COUNT (1) >= 0 GROUP BY b1.party_id,          b1.party_type,          b1.person_name,          b1.person_first_name,          b1.person_middle_name,          b1.person_last_name,          b1.status,          b1.phone_area_code,          b1.phone_number,          b1.address1,          b1.address2,          b1.address3,          b1.address4,          b1.postal_code,          b1.city,          b1.state,          b1.country,          b1.email_address,          b1.date_of_birth,          b1.place_of_birth,          b1.date_of_death,          b1.gender,          b1.declared_ethnicity,          b1.marital_status,          b1.person_title,          b1.personal_income,          b1.do_not_mail_flag,          b1.created_by,          b1.creation_date,          b1.last_updated_by,          b1.last_update_date1,          b1.last_update_date2,          b1.last_update_date3,          b1.party_number,          b1.ACCNT_FLG]
READER_1_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:26 2009)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Mon Dec 28 19:10:26 2009
Target tables:
W_PARTY_PER_DS
READER_1_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:29 2009)
LKPDP_1> DBG_21312 Lookup Transformation [Lkp_W_ORA_PARTY_CONTACT_PS]: Lookup override sql to create cache: SELECT W_ORA_PARTY_CONTACT_PS.DEPARTMENT AS DEPARTMENT, W_ORA_PARTY_CONTACT_PS.ORG_CONTACT_ID AS ORG_CONTACT_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_NUMBER AS CONTACT_NUMBER, W_ORA_PARTY_CONTACT_PS.JOB_TITLE AS JOB_TITLE, W_ORA_PARTY_CONTACT_PS.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_PARTY_ID AS CONTACT_PARTY_ID FROM W_ORA_PARTY_CONTACT_PS WHERE CUST_ACCOUNT_ROLE_ID=0 ORDER BY DATASOURCE_NUM_ID,CONTACT_PARTY_ID,DEPARTMENT,ORG_CONTACT_ID,CONTACT_NUMBER,JOB_TITLE
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [Lkp_W_ORA_PARTY_CONTACT_PS] from [1048576] to [1392640].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [BIDB], user [AABAW]
LKPDP_1:READER_1_1> BLKR_16051 Source database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:29 2009)
LKPDP_1:READER_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> DBG_21079 Creating Lookup Cache : (Mon Dec 28 19:10:30 2009)
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 3247
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 3238
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP16713_5_0_1371W32.[dat/idx] in directory E:\Informatica\PowerCenter861\server\infa_shared\Cache for Lookup [Lkp_W_ORA_PARTY_CONTACT_PS].
LKPDP_1:TRANSF_1_1> DBG_21641 Lkp_W_ORA_PARTY_CONTACT_PS: Index cache size = [1392640], Data cache size = [2097152]
WRITER_1_*_1> WRT_8167 Start loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:29 2009
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8229 Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 []
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_PARTY_PER_DS]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8081 Writer run terminated. [Error in loading data to target table [W_PARTY_PER_DS]]
WRITER_1_*_1> WRT_8168 End loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:30 2009
WRITER_1_*_1> WRT_8035 Load complete time: Mon Dec 28 19:10:30 2009
LOAD SUMMARY
============
WRT_8036 Target: W_PARTY_PER_DS (Instance Name: [W_PARTY_PER_DS])
WRT_8038 Inserted rows - Requested: 1568 Applied: 1552 Rejected: 0 Affected: 1552
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [W_PARTY_PER_DS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
     Total Run Time = [3.765415] secs
     Total Idle Time = [0.781122] secs
     Busy Percentage = [79.255350]
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
     Total Run Time = [1.001440] secs
     Total Idle Time = [0.690994] secs
     Busy Percentage = [30.999937]
     Transformation-specific statistics for this thread were not accurate enough to report.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_PARTY_PER_DS] has completed. The total run time was insufficient for any meaningful statistics.
MAPPING> CMN_1793 The index cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [696320] bytes
MAPPING> CMN_1792 The data cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [1908736] bytes
MANAGER> PETL_24005 Starting post-session tasks. : (Mon Dec 28 19:10:30 2009)
MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Dec 28 19:10:30 2009)
MAPPING> TE_7216 Deleting cache files [PMLKUP16713_5_0_1371W32] for transformation [Lkp_W_ORA_PARTY_CONTACT_PS].
MAPPING> TM_6018 The session completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_HZ_PERSON_PARTY] (Instance Name: [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY])
     Output Rows [1788], Affected Rows [1788], Applied Rows [1788], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_PARTY_PER_DS] (Instance Name: [W_PARTY_PER_DS])
     Output Rows [1552], Affected Rows [1552], Applied Rows [1552], Rejected Rows [0]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [SDE_ORA_PartyPersonDimension_Customer_Full] completed at [Mon Dec 28 19:10:31 2009].

Itunes driver's registry settings for burning CDs/DVDs are missing,

Links provided by the Apple support staff thus far
1.Windows: http://docs.info.apple.com/article.html?artnum=93286
2, http://www.info.apple.com/kbnum/n93071
are generic and do not address the problem I've described in numerous posts - I have read and implemented these suggestions with out success. When launched, itunes complains that "the registry settings used by itunes drivers for importing and burning CDs/DVDs are missing" is missing CD drivers. When I acknowledge the problem and try to burn CDs from itunes the error message "disk recording is not found" is received.
Here are the diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RX670(UC)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Video Driver: NVIDIA RIVA TNT2 Model 64 (Sony)\RIVA TNT2 Model 64
Found aspi32 running.
IDE\DiskMaxtor4D080H4_________________________DAH017K0, Bus Type ATA, Bus Address [0,0]
IDE\DiskMaxtor6Y160P0_________________________YAR41BW0, Bus Type ATA, Bus Address [1,0]
GenDisk, Bus Type UNKNOWN
SCSI\DiskMaxtor6Y080L0_________YAR4, Bus Type SCSI, Bus Address [1,0]
USBSTOR\DiskHP_____Photosmart_84001.00, Bus Type USB
USBSTOR\DiskTOSHIBAMK8032GAX______0000, Bus Type USB
IDE\CdRomASUSCD-S400/A__________________________2.1N___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomPIONEERDVD-RW__DVR-104_________________1.40___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive F: PIONEER DVD-RW DVR-104 on CDR media at speed 0X.
The CD burner works on other programs! Problem occurred with upgrade to latest version of itunes.
1. Installed of the latest gear drivers
2. Upgraded burner firmware
3. Reloaded/repaired itunes on numerous occasions
4. Using latest latest Nero software from an Admin account and launched program to ensure Nero Burner rights are installed.
5. Performed registry hacks & removed values of upper/lower filters as prescribed (no joy).
There are NUMEROUS people having this problem with no assistance; reference http://discussions.apple.com/myposts.jspa
Help Please!

Yes, your green bookmarked article really solved my question.
Thank you very much!
Hans M

Shuffle with Drive Error

I was given a new shuffle. I can't use it until I get iTunes 7.0.2 ~ when I try to install the program I get the error invalid drive g:\. I have no drive g when I look at my computer.
I have called and they can't help me.
Does anyone know how I can get my new shuffle to work?
TIA,
Ronda~
Windows XP

Hi-
Media errors are commonly due to incompatible or poorly made media.
http://www.digitalfaq.com/reviews/dvd-media.htm
As far as the drive goes, if other media burns properly, I would try a different brand of DL discs.
Taiyo Yuden is recognized as one of the top, quality disc makers.
Verbatim is also a winner.
Slowing the burn, burning after a restart of the machine, and using a hard drive with ample free space are also ways to improve burn performance/reliability.
It is also possible that a firmware update for the optical drive could help the problem.
Firmware updates typically address media compatibility.

[INS-06001] Failed to perform operation due to internal driver error

I'm installing GI 11.2.0.4 on the zone of solaris(SPARC) 11.1.
Among executed runInstaller, the following error occured when
"setup" button is pushed for checking SSH connectivity
on "Secify Cluster Configuration(Step 4 of 9)" section.
[INS-06001] Failed to perform operation due to internal driver error.
Additionally, the following was output by a console executed runInstaller.
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGBUS (0xa) at pc=0xffffffff3df832fc, pid=14407, tid=38
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_51-b10 mixed mode)
# Problematic frame:
# C [libc.so.1+0x832fc]
# An error report file with more information is saved as hs_err_pid14407.log
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
Does anyone know the solution for this issue?
The configuration of the system is the following.
+--------------------------------------------+
|         testserver (global zone)           |
|+------------+                +------------+|
||   zone1    |                |   zone2    ||
||      +-----| +----------+ |-----+      ||
||      |vnic3|--|etherstub1|--|vnic4|      ||
||      +-----| +----------+ |-----+      ||
||            |                |            ||
|| +-----+   |                | +-----+   ||
|| |vnic1|   |                | |vnic2|   ||
|+------------+                +------------+|
|      |         +----------+        |       |
|      +---------|etherstub0|--------+       |
|                +----------+                |
|                     |                      |
|                  +-----+                   |
+------------------|vnic0|-------------------+
                   +-----+
zonecfg:kudotest01> export
create -b
set brand=solaris
set zonepath=/zones/kudotest01
set autoboot=false
set ip-type=exclusive
add net
set configure-allowed-address=true
set physical=vnic1
end
add net
set configure-allowed-address=true
set physical=vnic3
end
add anet
set linkname=net0
set lower-link=auto
set configure-allowed-address=true
set link-protection=mac-nospoof
set mac-address=random
end
add device
set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
end
zonecfg:kudotest02> export
create -b
set brand=solaris
set zonepath=/zones/kudotest02
set autoboot=false
set ip-type=exclusive
add net
set configure-allowed-address=true
set physical=vnic2
end
add net
set configure-allowed-address=true
set physical=vnic4
end
add anet
set linkname=net0
set lower-link=auto
set configure-allowed-address=true
set link-protection=mac-nospoof
set mac-address=random
end
add device
set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
end
zonecfg:kudotest02>
testserver:~# dladm show-vnic
LINK                OVER         SPEED MACADDRESS        MACADDRTYPE       VID
vnic0               etherstub0   40000 2:8:20:b5:32:c1   random            0
vnic1               etherstub0   40000 2:8:20:45:a2:af   random            0
vnic2               etherstub0   40000 2:8:20:86:7e:4e   random            0
vnic3               etherstub1   40000 2:8:20:8a:96:a    random            0
vnic4               etherstub1   40000 2:8:20:ef:f3:dd   random            0
root@kudotest01:~# ipadm show-addr
ADDROBJ           TYPE     STATE        ADDR
lo0/v4            static   ok           127.0.0.1/8
vnic1/v4          static   ok           192.168.120.2/24
vnic3/privaddr    static   ok           192.169.120.2/24
lo0/v6            static   ok           ::1/128
vnic1/v6          addrconf ok           fe80::8:20ff:fe45:a2af/10
root@kudotest02:~# ipadm show-addr
ADDROBJ           TYPE     STATE        ADDR
lo0/v4            static   ok           127.0.0.1/8
vnic2/v4          static   ok           192.168.120.3/24
vnic4/privaddr    static   ok           192.169.120.3/24
lo0/v6            static   ok           ::1/128
vnic2/v6          addrconf ok           fe80::8:20ff:fe86:7e4e/10

Please check https://hiteshgondalia.wordpress.com/2012/12/08/ssh-setup-fail-unable-to-find-ssh_host_rsa_key-pub/, Oracle Application DBA: [INS-06001] Failed to perform operation due to internal driver error (During installation of RAC…

ERRORS found during the burning process #-34506...any idea what this means?

ERRORS found during the burning process #-34506...any idea what this means?
This one project I want to copy to DVD keeps saying this when I go to burn (that is after nearly 2 hrs of processing). There is nothing wrong with the movie so i don't know why i'm having such a problem burning it. i guess to start i'd need to know what this code means (I couldn't find it in iDVD help).
thanks in advance
Jeremiah

First I'd be certain that I had changed the preferences from best quality to best performance.
Did you follow the chapter rules?
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
You may have already done this, but
Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
:)Sue

Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel...

I have done all the steps that I could find, and I am still having this issue...can someone help me please?
Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver Not Available
CD Driver DLL Not Available
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00D5BEA809F38F28
Current user is an administrator.
The current local date and time is 2014-04-05 12:39:11.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
Description:            Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
IP Address:             192.168.0.16
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:      Yes
DHCP Server:         192.168.0.1
Lease Obtained:     Sat Apr 05 12:21:08 2014
Lease Expires:       Sat Apr 05 13:21:08 2014
DNS Servers:         68.105.28.12
                                68.105.29.12
                                68.105.28.11
Adapter Name:        {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
Description:            Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Wed Dec 31 17:00:00 1969
Lease Expires:       Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-04-05 12:38:45.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.0.1
Serial Number:       CCQH8BRSDT77
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

CD Driver Not Available
CD Driver DLL Not Available
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

Error 2510/2355 - Disk burner or software not found

When I run as administrator, I get Error 2510. When I run as a regular user, I get Error 2355. Either way, and in safe mode or not, I get the "Disk burner or software not found" error when trying to burn CDs. iTunes was working wonderfully for ages and overnight (literally) it stopped writing CDs. There has been no new hardware or software in my system around the time it stopped working (unless my anti-virus missed something). Help please!
What I’ve tried:
Un-install and re-install iTunes.
Steps from: http://support.apple.com/kb/TS3299 (but then CDROM didn't work for regular use)
All of the steps from: http://support.apple.com/kb/TS2308 including solution 3 (manually un- and re-install GEAR drivers)
Ran System File Checker (no problems found), reboot, reinstall Gear Drivers
NOTE: When putting a CD into the drive, I can select Play From Itunes and it works fine.
Here are my diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HPE-500f
iTunes 11.2.2.3
QuickTime 7.7.5
FairPlay 2.6.12
Apple Application Support 3.0.3
iPod Updater Library 11.1f5
CD Driver 2.2.0.1
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002ABB8808AE4888
Current user is an administrator.
The current local date and time is 2014-06-28 21:44:46.
iTunes is running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD RADEON HD 6450
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dd6dd481bbfb0f7503d21df5c81fb96d
iPodService 11.2.2.3 (x64) is currently running.
iTunesHelper 11.2.2.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: HP DVD Writer 1260v on CDR media at speed 16X.

Bump.....
Can anyone please help me?

Drive error at end of Burn

Similar Messages

Maybe you are looking for