Drive Genius cd will not boot on my pismo

Greetings everyone,
I'm trying to boot Drive Genius 1.5.3 cd on my pismo which has 10.4.11 and I can't get it to boot from the CD. I load it, restart and hold down the "C" key, but it doesn't boot. Any suggestions would be appreciated.
Thank You.
Marco

Great news Marco, thanks for the Stars.
You might not of heard of this great fixer upper, so I'll mention it here...
Might give a try with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
As long as you don't have a USB connection in tandem with a UPS, which can cause problems.

Similar Messages

Hard drive detected but will not boot Windows Vista or recovery disk

Hi,
I have a very similar issue with a HP Pavillion a6355.uk, the hard drive kept crshing windows and then it finally just kept getting pass the HP boot menu options, and then all I get is the DOS "@press ctrl+alt+del to restart".
The hard drive is detected and passes all the tests, after pressing F9, going into the F10 options. F11 does not do anything, so cannot recover windows/the system.
I have tried changing the SATA connections on the motherboard, no difference. I tried the recovery boot disk I created when it was working and it will not boot with the old or new hard drive I bought to replace it (same size and compatable).
I cannot find where to partition the new hard drive or format the c: on the old one (it had D: for the recovery, but as it won't boot, cannot access this).
I have also tried the HP website to dowload the drivers for the new one, but the page does not load up to show any drivers or Windows to download.
http://support.hp.com/gb-en/product/HP-Pavilion-a6300-Desktop-PC-series/3644673/model/3671505/driver...
The next page just keeps looping or not proceeding when I put in details.
I can’t find anywhere to get hold of my copy of windows vista for this PC or get a disk to re-install on a new drive or fix the old detected drive, can someone please help!!

Just what size HD and is the drive Sata II or Sata III?
Vista 32bit .iso You must have a valid installation key, which should be on the COA sticker on the computer, to activate the installation once it completes. ImageBurn to create the .iso disk. Driver page Vista (not 64 bit)
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

10.5.8 Both hard drives OK, tested - will not boot past startup screen

Okay, I have an early 2008 MacPro, and everything has been running fine, but I was trying to search for something in Finder, and it wouldn't show up, so I checked my other hard drive's permission options - it displayed "Custom" for all users, when I know I had them all set to "Read & Write" previously, so i changed my main user's (on my newer HD on 10.5.8) permission to Read & Write on the original HD with 10.6.8, so I could search its contents, then these error messages poppped up, everytime i hit OK, a new one popped up immediately in its place, with some "Apple AUD" OR "HD" messages (can't remember the exact messsages), so I restarted my computer and now I cannot get past the apple logo screen.
- Attempted selecting both hard drives as startup discs and still hangs at the white apple logo screen.
- I tried booting into Safe Mode and it loads the status bar, and when it's done loading, it simply goes back to the spinning gear.
- Tried booting from my 10.5.8 installation disc and it works, both of my HD's tested "OK" when I verified them.
- Tried resetting PRAM, and even reset SMC, and the problem persists.
One last note: the original HD that came with my Mac Pro, which has 10.6.8 on it as of last year, has a tiny lock icon on the left of the little hard drive graphic.
I'm stressed because I use LOGIC a lot, and I have all of my music projects on these hard drives, and over a million files between both of them. I'd pull my hair out, if I hadn't just shaved my head for summer
Any help would be GREATLY appreciated!

Your hard drives may be OK, but the installed systems are not. You need to reinstall OS X on your startup volume. Doing this with Leopard requires your Leopard DVD:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Upgrade BIOS and drivers have possibly corrupted drive. OS will not boot.

Model: Toshiba P505-8980
Part Number: P6PG0U-005002
OS: Windows 7 Professional 64-bit (upgraded from Home Premium)
6 gig RAM, 500gig HD
Actions:
I haven't started up my computer in a while. First I installed the critical and optional updates (3 total) from windows update, rebooted, and Toshiba Service Center popped up and said that there was the BIOS 3.10 update and the HDD/SSD Alert update. Through the Service Center I downloaded and installed the BIOS update, at the end it seemed as if there was an error. I rebooted the computer and everything seemed ok, so I downloaded the HDD/SSD update through the Service Center. Upon rebooting the drive would not boot. (Screen remained blank with a blinking cursor and HDD light was not on.) There are no accessories/USB devices/drives attached. After a reboot I checked the BIOS and it recognizes the Hard drive, I restored all settings in BIOS to default and rebooted. The computer started receiving stop errors (blue screen) and stuck in a reboot loop. I entered the BIOS, restored default settings again and rebooted, I could get to safe mode and it would receive stop errors trying to load disk.sys file. I also tried last known good configuration and that wouldn't work either. After a while the laptop was able for me to select to try and repair the disk using the repair utility. It reported that there may be partition errors (on the last step of recovery) and I selected to repartition the drive to factory default with the Toshiba repair tools. It got to about 98-99% and received errors at the end. I tried using a Windows disk to reinstall the OS, but it reported it couldn't install on any of the drive partitions because of an error in the boot configurations. After trying to repair again it doesn't report any disks or partitions. Currently after booting it reports now that there is an error that occurred while attempting to read boot configuration. File: \Boot\BCD|Status: 0xc000000f. Guessing that the boot sector got corrupted. After reading that BIOS isn't recommended to be installed while in windows, I'm wondering if using the service center messed something up.
Question 1: Any recommended actions to take now? No recovery disk available
Question 2: Is there a way to configure the service center to download a BIOS update and be able to save it instead of only being able to install it within windows and the service center?
Thanks in Advance!

I was able to get into system recovery. This system recovery was different then the first one I came across. Underneath the Command Prompt option there was a selection for a Toshiba based restore. That is the one I tried that failed at 98-99% This system recovery just has the standard options. At first it showed me the original OS of Home Premium (recovered). I tried to repair the Home Premium and it still wouldn't work. "Startup could not repair the problem". On the many tries the probelms were either "Failed Installation" or "Partition Table". Then when I tried loading the OS it would blue screen and reboot repeatedly. So I loaded up Windows 7 Professional from a different CD to at least get the OS working. I tried Repairing but that didn't work with the same errors, and it also reported that there was no system image on the disk. I did a Custom (fresh) install and had all items copied to Windows.Old folder. So now I have an OS, BUT I can't activate it now even with the keys that I have from the old version because it said the key was only used for upgrade, not clean installs. So now I'm left with trying to find a way to get the original Home Premium image so I can load that and then upgrade since I have the keys I need. I tried doing repairs again, this time it showed me two Windows 7 Professional and one Windows 7 Home Premium. Again I tried repairing the Home Premium but it came back with the same errors. Now all that remains is just the fresh install of Windows 7 Professional that I installed but can't activate with the key. Anyway I can get/download a factory image from Toshiba? I only just bought the laptop shortly before Christmas.

Changed hard drive now system will not boot [Solved]

Hi,
Right got myself into a real mess, transferred data from old drive to new ... set up fstab ... grub is working...
But.... getting init kernel panic
Now I figure I need to reinstall kernel [via chroot! in wiki!]
first try did not work via ubuntu live cd so am burning arch disc now
I noticed that /dev is empty wondered is that would cause a problem
reallly do not want to install Ubuntu as I need my box hehe
MrG
Last edited by Mr Green (2008-07-22 15:21:45)

While most things in /dev are created on the fly you do need a console node and a null node to boot the system. If you boot a cd, mount the drive (eg /mnt/disk) and then
mknod -m 600 /mnt/disk/dev/console c 5 1
mknod -m 666 /mnt/disk/dev/null c 1 3
That might fix the problem.
The other times I've had kernel panics have been when the root=/dev/sda? bit of the kernel line in grub was pointing to the wrong place (kernel was looking at my /home partition and wondering why it couldn't find init) so thats another thing I would check.

Will not boot up from DVD drive

HP pavilion slimline s3200n will recognize the DVD drive but it will not boot up from the drive

Hi,
Try hitting the escape button from boot up. It normally gives you the boot options where you can select the DVD drive.
If you can't get into the boot options, try getting into the bios with F10 and change boot order options.
Greetings
Philippe
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Mac Mini i7 (Mavericks) will not boot from the external drive

Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
Not even from the external Firewire hard drive with Mavericks

Does the external HD have a GUID partition table?
Is the external drive formatted Mac OS X Extended (journaled)?
Is this a 2011 or late 2012 Mac?
How was Mavericks installed on the external drive?
Who is the builder of the drive mechanism in the external drive?
Who is the builder of the external enclosure?
What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
Is the external enclosure directly connected to the mini?
Have youtried a different interface cable?

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

Machine will not boot; hard drive makes clicking noise

My G4 will not boot up.
Here are the symptoms:
It passed the hardware test;
Will not perform a safe start - so cannot run disk utility;
Hard drive makes a clicking noise.
I'd appreciate any advice about how to proceed.
pdh

Yes, as mentioned backup now. best not to use your Mac till you do. The drive may fail for good. Here's some tips on replacing your drive (they are pretty inexpensive now);
This is by SDMacuser,
Even if you have never installed nor pulled a HD from a Powermac...... trust me....it is not all that difficult.
I can actually switch internal HD's among 3 separate G4 Towers I own in a matter of minutes (often less than 10 minutes).
Simply power the system down and ground yourself (a grounding strap is recommended or at the very least touching the metal frame to discharge any potential static electricity prior to actually touching the HD or any internal components on your system).
Disconnect the power cable to the back of the HD, then the long ide connector on the back of the HD / cable (pull straight back while grasping the black connector with 2 fingers ... do not yank the actual ribbon cable).
All of my HD's are mounted or bolted to their own metal sleds (either single sled or a dual sled) with 4 screws.
Unscrew the small screw (philips) holding the sled in place on position one below the ide connector or cable. And gently remove the sled & HD from the Powermac without bumping / damaging other internal components.
Remove the 4 screws from the sled itself holding the HD in place. Be careful not to allow the drive to fall once all screws have been removed.
Install the new HD (and make sure to address proper jumpers on the back of the HD itself.)
Now reverse this process with new HD for proper installation into the G4 Powermac.
Any questions just post back.
btw ... there are a few QT demos on apples web sites showing how to do this.
 Cheers! DALE

Help needed on startup. My computer will not boot from the CD drive!!!

Problem with iMac G3 333, the Message on the screen states: "The System Software on the starup disk only functions on the media, not if copied to another drive." Like a fool, I copied the system folder from the original system software 9.2.2 on to the iMac. System disk which is not a complete system folder when used on the computer. I have searched the Internet, but can not find an answer. I have tried everything, holding down the C key, "Delete, Opition, Apple key, shift" holding the mouse down on startup, various combinations of other keys, etc. The CD starts to spin, but the computer switches to the hard drive and the message above returns. No matter what I try I still can't boot from the tray loading CD drive. Is there any Firmware code that I can use. I know how to access Firmware on the Imac and can boot the iMac using Firmware, but I don't know how to use Firmware to boot the CD drive which I need to do so I can reload the original software. CAN SOMEONE PLEASE HELP? Thanks, Jim

Yes, I have tried both System Softwares a number of times. The C key will not boot up the CD drive and the harddrive always boots with the original message. I need to get the CD drive to boot so I can reloaded tge original software. Do you know anything about booting the CD drive using Firmware? Jim

IMac will not boot, hard drive file problem? Can't install OS in 2nd part.

The iMac will not boot. The Apple displays on the screen, the cursor spins for awhile, and then it loops into a reboot effort.
Last night, I was doing a lot of custom file sharing settings using the include enclosed folders option at the bottom of the Get Info window.
Question 1: Could that file sharing process have messed things up?
In an effort to get things going........ A few weeks back, I used Disk Utility to create a 2nd partition, with the intent of installing Ubuntu Linux there. I never attempted the install, as far as I can remember, while playing with the Ubuntu Live CD. So, I thought I would install 10.5.6 from the CD in the 2nd partition. But I get an error message that says "The installer could not create the folder "/Volumes/Ubuntu 9.10/BaseSystem.pkg.161nDNDdQ.""
Question 2: I also shared that partition, could that have caused the OS install failure?
Question 3: If I understand the book correctly, I can try to install the OS from the CD on the 1st partition, and not lose my data, correct? Unfortunately, I don't have any backup for the data, as I don't own any drives large enough yet to accommodate the data on the drive.
Question 4: Anyone have any other thoughts as to what ent wrong?

Hi, Grant.
Sometimes, it just pays to think on a problem. I awoke thinking, if it will boot the OS X install CD, it ought to boot my Ubuntu Live CD. And then, maybe I can change permissions on the first partition. As soon as I thought that, it occurred to me, if the problems are with the permissions, what if I used the OS X disk, and erased (formatted) the Ubuntu partition. That should set all the permissions on that partition back to default. Would OS X install then to the Ubuntu partition?
You better believe it did!! I'm typing this from the Mac after updating my 10.5.6 to 10.5.8 in the 2nd partition, and I'm booting from the 2nd partition.
I then did as you suggested, and from the Mac, I repaired the permissions to the first partition. But, the result was the same, there are a few permissions that do not match, and Disk Utility cannot, does not, or will not correct them.
I'm currently downloading the 10.5.8 combo update .dmg file. My thought is to burn that to a disk, and then install it over the version in partition 1. And trust that the current installation on partition 1 does not have any cross linked files that will destroy some data.
I do have some old ATA IDE drives I can hook externally to the Mac, and copy some of the information I have from the Mac to those drives before doing the 10.5.8 install.
Can you think of a better solution?

TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao.

T61 will not boot with nvidia quadro 140m driver

Hi all,
A couple of weeks ago, after allowing MS update to install some FTDI driver updates, my system will not boot up and hangs shortly after the initial vista loading screen. The screen goes black with some HD activity and eventually reboots. After trying a couple of restore points with no luck, I started to remove the latest driver updates and other software to my system again with no luck.
If I uninstall the nvidia driver and use the Standard VGA driver, it will boot and come up properly. I've done a bunch of web searches and searches on this site and can't find my exact circumstances. Its hard to believe that it could be a hardware issue since it started after a software update, but since it hasn't been a problem for anyone else, I'm just not sure at this point.
I've tried earlier versions of the nvidia driver, removing other drivers and services trying to find a coincidence, but nothing seems to work. I'm kind of at a loss at this point. Does anyone have some suggestions?
Thanks in advance,
Dave

More info on my system:
OS Name    Microsoft® Windows Vista™ Business
Version    6.0.6001 Service Pack 1 Build 6001
System Model    6459CTO
System Type    x64-based PC
Processor    Intel(R) Core(TM)2 Duo CPU     T8300 @ 2.40GHz, 2401 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date    LENOVO 7LETC5WW (2.25 ), 11/14/2008
SMBIOS Version    2.4
Installed Physical Memory (RAM)    4.00 GB
Also, does anyone know if using the Standard VGA Display driver without problems on this system means that the video card hardware is working? In other words, I'm trying to rule out a hardware problem with my nvidia quadro 140m card, so if the system works fine with the standard vga driver, would that mean the hardware on the card is ok?
Thanks,
Dave

I have a Macbook pro 4,1 My Battery would not charge after only 23 cycles. I tried the battery update now my macbook will not boot. it has a kernel panic Unable to find driver for this platform:

Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please help

Panic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext

System will not boot with Seagate 3Tb expansion drive plugged in.

I have a HP Pavilion HPE h8- 1214 Desktop , I recieved a Seagate 3TB expasion drive as a gift but when plugged in, the system will not boot. It turns on but thats it. It never gets to the boot sequence. I have it plugged into the top 3.0 usb slot and have tried all of the other slots as well with no sucess. But if I leave it unplugged the system boots right up. I can then plug it in and it works fine. I have plugged it into my wifes HP All- In- One and it boots fine and works. I have a WD 2TB drive that works fine as well on my system . I have searched Segates support for hours and all they say is to change the boot sequence. Have tried that, no go. What they dont get is no matter what I do if that drive is plugged in it never gets as far as booting and reading the boot sequence. Please help. Thank you!

Hi NcBunky,
Are you using Win 7 64 bit? Did you update the Texas Instruments (TI) USB 3.0 XHCI Host Controller?
I have an H8 1380t PC. Updated the TI USB 3.0 driver and had the same problem.
When booting the PC with the USB 3.0 external drive connected to the PC the PC would not boot. When booting the PC with only the mouse, keyboard, and a USB 2.0 external drive attached the PC would boot. Once booted you could attach the USB 3.0 drive and it worked fine.
Solution was to roll back (reinstall) the TI USB 3.0 XHCI Host Controller to the original factory installed driver.
System now boots with the external USB 3.0 drive attached.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Drive Genius cd will not boot on my pismo

Similar Messages

Maybe you are looking for