"Drive is offline" message in Missing Disks window

Hello support person,
When I try to open my project I get a Missing Disks window and the message says: To preserve the integrity of the data used by Final Cut Pro HD, it is necessary to ensure the existence of the following path(s): 'Justine's Drive' is offline. The options the window message gives are: "Quit", "Check Again" and the highlighted one is "Reset Scratch Disks" The first window that pops up before the Missing Disks one is an External AV window which says unable to locate the following external devices: Apple FireWire NTSC (720 x 480) Your system configuration may have changed, or your deck/camera may be disconnected or turned off. Please check connections .... And as I have done throughout working on the project after the initial digitizing process with my camera, I have clicked "Continue" on this window but this time the Missing Disks window comes up.
My external drive called "Justine's Drive" is mounted and appears on the desk top. I have tried to dismount and unplug the drive and then to just open/launch Final Cut Pro HD (Academic 4.5) straight from the applications folder in my laptop's hard drive but I get the same messages and Final Cut will not even open independent of the project.
The last time I worked on the computer (yesterday) everything was fine. The only thing is that I transported the laptop and drive to another location. But I had them well protected and didn't drop them or anything...
Hope you can help. Thank you.
G4 667 PowerPC Laptop Mac OS X (10.4.6) 512 MB RAM
G4 667 PowerPC Laptop Mac OS X (10.4.6) 512 MB RAM

I found answer in archive! You guys rock! Thanks!!!!

Similar Messages

Issue Launching Final Cut Pro - Missing Disks Window....?

Can anyone help me with this issue? Just loaded FCP on my Intel Mac, and I keep getting this pop up window named " Missing Disks" that is telling me "To preserve the integrity of the data used by FCP HD, it is necessary to ensure the existence of the following path(s):
'36th Chamber/Users/Macluva99/Documents/Final Cut Pro Documents' is missing.
And it gives me the option to (1) Quit the program (2) Check again or...(3) Reset scratch Disk (then another window pops up and I have no clue what to do with.
Any ideas...?
Thanks,
[email protected]

This is actually version 4.5 for FCP HD, but I had loaded it on this machine a month ago and it was working and it wasn't giving me this pop up window/issue. That was when I was still on Tiger I believe. Would it be because im also on Leopard now as well?

Try to reset to factory settings/missing file"windows\system32\winload.efi

I have Toshiba Serial #XXXXXXXXX, model P75-A7200
Bought it brandnew at best buy almost a year ago. I did not make any recovery disc's or flash drive.
It is getting slow and someother minor issues while on internet, so I want to do a Full Reset to facory settings. I have tried the Refresh option and the Reset option. Both come back with error message ;oxc0000001, missing file: Windows\system32\winload.efi
So how do I fix this since I didnt make a recovery or start up discs? I can reboot the computer just fine, I just cant do a computer reset.
I am running Windows 8.1, came installed with windows 8, I upgrade to 8.1 shortly after I bought it.
[Moderator edit to remove serial number.]

Satellite P75-A7200
I didnt make a recovery or start up discs?
Obtain them from Toshiba. Scroll down to Get Recovery Media here. See the instructions in the section Restoring from recovery media, which begins on p. 60 of the User's Guide.
Satellite/Satellite Pro P70/P50/P40-A Series User’s Guide
Be sure to follow these instructions when you upgrade to Windows 8.1.
How to Update from Windows 8 to Windows 8.1
-Jerry

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

"Missing Disks" Error Message - Unable to open FCP

Every time I tried to open FCP, a "missing disks" error message shows up and prevents me from opening the application. It says, "To preserve the integrity of the date used by Final Cut Pro, it is necessary to ensure the existence of the following path(s):" and it says "Macintosh HD is offline." There are two options for the error message, "Check Again" or "Reset Scratch Disks." When I click "Check Again," nothing happens. When I click, "Reset Scratch Disks", it takes me to a "Scratch Disks" window, which shows, "9.8GB on Macintosh HD is offline." I click "OK", but it only takes me back the same "missing disks" error message. What should I do to solve this error and open FCP?
Thanks in advance.

Hi -
If you are mid-project, then first I would find your project file and make a duplicate by Control-clicking on it, and selecting Duplicate. You can rename that new file so it is easy to remember. Once that is done, you have a protection back up of your project file so that whatever happens, you can recover back to this point in your project by opening the duplicated file.
Selecting (or Re-Selecting) a Scratch Disk does not affect what has been done in a project's past, it will only affect what FCP will do once it is launched and where it will place media and renders as you go forward.
A bigger concern/interest to me is why the disk Macintosh HD is offline, since Macintosh HD is usually the name of the internal system disk on your computer.
Have you renamed your internal hard disk (either intentionally or unintentionally)?
Do you have external disks connected to your computer?
Have you installed any new software - like Snow Leopard, or Fusion?
If you have had the disk Macintosh HD selected as your scratch disk all throughout your project up to this point, it is likely that the disk Macintosh HD has your captured footage and renders. So . . . if it is off-line as a scratch disk, once you reset your scratch disk to an available drive and open your project, it is likely that the project will show that all your media, which it previously associated with the missing disk is offline as well.
If that is the case, you will need to reconnect your media and re-render your renders. This can be done by selecting your offline clips and Control clicking on one of them and selecting Reconnect Media . . .
*If you are not feeling confident about proceeding, I would recommend a trip to an Apple store to get someone to walk you through the process.*
Hope this helps.

Missing BOOTMGR Windows Vista No Disk

Hello,
I need some help. After doing a "Factory Recovery," my laptop won't boot to windows vista. After booting, it won't finish the "Factory Recovery" process, and it ends with a black screen with the words "Missing BOOT MGR Crtl+Alt+Esc."
The laptop(G60-125NR) didn't come with anything. I HAVE NO DISK OF WINDOWS VISTA. It was only already installed in the laptop.
Can anyone help me with this?
Here are the details.
I tried pressing F11 or F10 - the factory recovery screen - and used both the hard drive partition and then the recovery disks I created before the factory recovery-thing. Hard drive ended with error 1005 and using the disk I got error 1002. Both telling me to contact HP.
Purchased a Boot Disk and it got me to System Recovery Options. There, I could not select on any operating system. I don't even know which Drives to add. Plus, as I was trying to see in the folderfs, nothing was comming up. So I just clicked on Next and tried the Startup Repair option. After a while it said that Startup Repair cannot repair this computer automatically. It still says MissingBootManager on the details.
At the Windows Boot Manager screen,
Windows Setup [EMS Enabled]
But on the tools;
File \boot\memtest.exe
Status: oxcoooooof
Info: The selected entry could not be loaded because the application is missing or corrupted.
I hope you can help me. Thank you.

Actually there are no comments regarding Vista version under notes for 10.2.0.3.
If You look at certify matrix under
http://www.oracle.com/technology/support/metalink/index.html
and search by Platform, then under Vista and 10gR2 You will see following notes:
Oracle Database (EE, SE, PE and Client) are supported on these platforms:
Business edition
Enterprise Edition
Ultimate Edition
Home edition is not supported!
But what I can suggest.
Look into listner.log - are there any errors.
Try to restart listener from the command line
lsnrctl stop
lsnrctl start
Try to recreate listener service

How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

Errors "A media driver your computer needs is missing." or "Windows cannot install required files" upon attempting to install Windows 10 TP build 10041 64-bit

I'm attempting to install Windows 10 TP build 10041 [64-bit]
I am currently being prevented from installing by a "A media driver your computer needs is missing." error, which occurs fairly early in the process. I've interpreted further text in the message as a suggestion that it's a DVD, USB or some other
similar driver issue. However, as I've been able to attempt each install through booting from DVD and USB, I'm not convinced this is the issue.
I'm currently installing to a 128Gb SSD drive. I have installed Windows 10 TP on my laptop's SSD with no issues.
On a few occasions the installation has continue with the installation, and then failed at about 6% with the following error:
"Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x8007045D". I have not removed the installation USB or DVD.
I did not have this issue when installing build 9841, so am currently assuming this is an issue with build 10041.
Apologies if this query has been posed before, a search did not show up this issue.
Any advice would be greatly appreciated.

Hi Michael,
Thanks for trying to assist!
I attempted removing/deleting partitions and formatting the SSD as part of the install process. I have also tried installing via USB and DVD with the same issues.
As part of the troubleshooting, I attempted to install a different OS. I was able to successfully install Linux Mint 17.1 with no issues. This further solidifies my impression this is an issue with Windows.
I will try a different USB port, appreciate the suggestion, didn't think it would make a different given the various methods already attempted.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Premiere Elements 13 Adobe Premiere Elements.exe-no disk (window) There is no disk in drive. Please insert a disk into drive\Device\Harddisk\DR3.

I just updated to Photoshop & Premiere Elements 13, by downloading the 64-bit Windows version from the Adobe website. Windows keeps popping-up (multiple times) "Adobe Premiere Elements.exe-no disk" window. Circle X - comment "There is no disk in drive. Please insert a disk into drive\Device\Harddisk\DR3. After 6 to 18 times (choses cancel, try again, continue). The window finally goes away. How do I get rid of this problem? BTW, when installing from Version 11, I opted from the preferences from the 11 Version.

One
What motivated you to
I chose Adobe Elements 11's preferences to be installed into the Adobe Premiere Elements 13
program. It was an options , when setting up the Version 13 program.
Was there something extraordinary about your Adobe Premiere Elements 11 preferences?
It is interesting situation...maybe a coincidence, but 11 was typically hit with No Disc message, and
most of the time the problem was related to SmartSound which was discontinued in versions 12 and 13.
If no extraordinary reason for this preferences transfer which I have not run into...
Assuming Windows 7, 8, o 8.1 64 bit
Local Disc C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
13.0
and, in the 13.0 Folder is the Adobe Premiere Elements Prefs file that you delete to "flush" the preferences. If that does not
work, then delete the whole 13.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with
Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete file cited.
Have you installed Premiere Elements 13 to the default location on Local Disc C?
Please review and consider.
ATR

I have a version Adobe pro 7, my old computer hard drive failed tried to install on my Windows 8.1, will not start up error message

I have a version Adobe pro 7.1, my old computer hard drive failed, tried to install on my Windows 8.1, will not start up get error message? any solutions? It worked perfectly fine on my old computer which was windows 7.0

Hey,
I am sorry but Acrobat 7 is not at all compatible with Windows 8. For this, you will need to upgrade your Adobe Acrobat version.
For better understanding, please refer this kb file:
Compatible web browsers and PDFMaker applications
Regards,
Anubha

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer.

I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition????

I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition. In order to have a GUID partition, it suggested I go to disk utility and make the change. I couldn't see the partition tabs in the disk utility application. So how do I accomplish the GUID partition?

The problem is, reformatting the partition may require you erase the hard drive. Normally Intel Macs are preformatted GUID. The fact that yours is not, says someone who initially installed the system on your Mac did you a disservice. Regardless, you should backup your data before you upgrade. GUID formatted drives generally are not compatible with iBooks (pre-2006 consumer notebooks by Apple) Powerbooks, and PowerMacs, and iMac G5s. So if you indeed have machine with the MacBook name on the screen frame, it was not properly formatted from the beginning.

I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I connect my iphone4-32gb with itunes via pc(windows pc-vista) sync. was done.but one message apper this message tell wifi disk crash.

i connect my iphone4-32gb with itunes via pc(windows pc-vista) sync. was done.but one message apper this message tell wifi disk crash,i don't know about this error also iam not use wifi,how its come error.

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

"Drive is offline" message in Missing Disks window

Similar Messages

Maybe you are looking for