Drive makes noise at home, not at the genius bar!

Hello, I am sure that all of you have had this happen to you. Your mac has a problem, so you bring it to the apple store.. However, once your are there, the problem stops! Yet when you get back home, it starts up again!
I have full Apple Care, so everything SHOULD be free for me... Here is my story:
My macbook's cd drive makes a loud buzz whenever it spins fast.. The computer is smart enuff to spin it down to a low speed, yet this is not good. CD rips stay at about 3x.. and booting from a cd is terrible! I went to the apple store, waited 40 miutes to speek with a genius, and when we put in a cd, it was whisper quiet and worked well.... He told me that it was fine, so I left. Well, its doing it again... Should I go to the apple store and demand that they replace it? Will they do this?
-Jordan

Some ideas:
Did you bring the same CDs that make noise with you to the Genius Bar, or did Apple Supply the CD?
Is it possible that the Genius Bar was too noisy for them to hear the noise?
Did you do exactly the same activity that causes the buzz at home at the Bar?
Does you MacBook have to be hot (or cold) for the noise to happen. Perhaps it needed more time to get acclimated at the Bar?
Does your MacBook have to be plugged into wall power (or running on battery) for the noise to happen? Did they plug it in the same way at the Bar? Did they use your power adapter, or theirs?

Similar Messages

Is there a way to make sure firefox does not erase the address bar list

First of all I have no idea where I am supposed to ask this so forgive me if I am in the wrong place. I have noticed when firefox erases it's history all of the web addresses are erased from the location bar. This is a huge inconvenience. Is there a way to 1: customize the bar quickly with all my favorite websites and 2: prevent firefox from erasing the address list in the location bar?

# See [[How to customize the toolbar]] and [[Bookmarks Toolbar]]
# Don't clear browsing history. See more info in [[Clear Recent History]].

Compaq Laptop make noise and can't open the windows.. Noise at HardDisk part

Why my sister's Compaq Laptop make noise and can't open the windows.. huhuhu.. the sound come from HardDisk in that laptop.. its sound like the HDD reader scratched the Disc insde.. how can it be?? my sister scold me already couze she wanna use for her work..

Hi Hawaiian_Starman,
Thank you for the suggestion.
I ran the first aid in the Keychain both for verification and for repair and both immediately returned with "no problems found".
As for the certificate, according the web administrator nothing had changed for the certificates.
even on the windows laptop I also get the certificate as being expired, but by simply accepting that I still have access.
I had a pop up every time that alerted me to the certificate issue, but whether I "continued" or not that still did not matter.
Yesterday, in an effort to find a solution, I went into the "details" and entered to trust this website.
Now that certificate issue does not pop up anymore. But I do not know how to reverse that either.
I have the feeling indeed it has something to do with a certificate, but how is the question.

Disk Drive make noises.

I got a Mac Book Pro. Disk Drive makes noises . There is no Disk in Drive. But stll Noises..
What happen , what can i do.. ?

Hi,
What happens when you pop a disk into the drive? Does it mount? You usually get this kind of noise on startup when there's something wrong with RAM, and the machine won't boot.

How can I make my imap email not take the emails off the server?

How can I make my imap email not take the emails off the server when I delete them on my iPad?
Can anyone help me whith this?
I tried to use the pop account in gmail settings but that was downloading all my emails sice 2008 ( more than 300 deleted emails tha can only be found in the deleted email box), when I just have 5 or 6 email in the inbox .
How can I solve this????
Thank u all...

I have the same problem. For years I have been able to delete emails from my ipad and have them remain on the server so I can deal with them on the desktop. Now they get deleted from the server when deleted from the ipad, which makes the ipad unless for reading mail.
You answered to delete the email account on the ipad and set up a new one as a pop. I have made many attempts to do that in the incomping mail server "Host Name" field but it always errors out even when the host name is equal to what my desk top has. So I can see no way to change away from IMAP. I started with an ipad 1 and now have an ipad 2.
Rachael

I have just over 100gig of music in my iTunes library plus what ever else I add in the future. Because of the amount I had to save my music library on an external drive as my laptop did not have the memory to hold it all. I want to back up my iTunes libra

I have just over 100gig of music in my iTunes library plus what ever else I add in the future. Because of the amount I had to save my music library on an external drive as my laptop did not have the memory to hold it all. I want to back up my iTunes library and save it on a different external drive, one I store all my back ups on. Is this possible? If so how can I do it?

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Hi, Michelle. Welcome to Apple Support Communities.
Have you tried resetting the SMC? The SMC (System Management Controller) has control over the charging function, so resetting it may help.

Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive

Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive. I already know that you can partition the internal hard drive to do the very same. Idon't want to use any of the internal space to run windows so I'm asking if it is possible to use a flash drive or external drive through USB to run windows when it is plugged in.

Read https://discussions.apple.com/thread/5043762?start=0&tstart=0 to discover you can't do it.
Allan

The home page does not show the awesome bar or file,edit,view,history,ect.

The home page does not show the awesome bar or the file,edit,history,bookmarks,tools or help options anymore. how can I get these feature to come back up. All it shows now is latest headline & getting started.

* In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also:
* [[Menu bar is missing]]
* http://kb.mozillazine.org/Toolbar_customization

Where has my Microsoft Word gone ? I had my Mac wiped at the genius bar and backed it up on a hard drive now i can not find it anywhere !!! HELP me please :/

Hello all,
I had my Mac wiped at the genius bar and backed it up on a hard drive,
but now i can not find it anywhere !!! HELP me please :/

Take your comp back to the repair shop along w/your receipt for proof that MW was purchased. Either they need to find/restore it back to your comp or reimburse you.

When opening new tab, how to make me able to type in the adress bar directly without clicking on it? -- (about:config reset and add-on doesn't work)

Hi all,
Need a help relating New Tab on Mozilla.
I want to be able to directly type in the address bar everytime I open a new tab in Mozilla, without clicking anything. To be clearer, it means that everytime I open the new tab, the blinking cursor is already on the address bar.
What's happening right now is everytime I open new tab, the cursor is not placed anywhere--not on the search bar on the page, not on the address bar. I should put the cursor somewhere to do something.
I tried using the about:config reset (1) and installing custom new tab (2), but both do not work.
When I tried the about:config reset the Reset button is not highlighted (I assume it means it's default already), and the Custom New Tab doesn't yield in different result.
What confuse me is 2 days ago my Mozilla works just fine. Everytime I opened a new tab, the blinking cursor was on the address bar and I was able to type directly.
Thank you and appreciate the help!!
Note:
(1) about:config reset:
- Type about:config into the address bar and press Enter.
- To bypass the warning, press the big button labeled "I'll be careful, I promise!".
- In the search box, paste browser.newtab.url
- In the search results, right-click browser.newtab.url and choose Reset.
(2) Custom Add On reset:
- Install Custom New Tab. = https://addons.mozilla.org/firefox/addon/custom-new-tab/
- Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
- Next to Custom New Tab, click the Options button.
- Set whatever page you want to open in each new tab (about:newtab is the default; about:home is the default home page), and make sure "Place focus in URL bar" is not checked.

''philipp [[#answer-669209|said]]''
<blockquote>
ok, as a follow up i'd recommend disabling half of the addons & restarting the browser - if the problem continues disable the other half & continue until you've narrowed it down to the culprit...
</blockquote>
Hi Philipp,
I read the link you copied on the first post and also tried your recommendation above. None seem to work. Even if I disable all add-ons, the problem still persists.
One other info, this problem seem to appear after I installed several program yesterday. These programs apparently installed other programs that set my homepage and main search engine to a particular website. But I installed all of these programs already. Would that be a cause of the problem?
Thanks.

Can i retreive my pictures from my hard drive if the genius bar says it's b

Can someone please help me with this I am really bummed. my pictures and videos of my now late dog and my past 6 years are on my Powerbook G4 and the genius bar says the hard drive is broken. The weird thing was it was working fine and then I went to turn i on and it just didn't turn on. there was no crash while I was using it. Can someone recommend a service to retrieve the information or any advice on how to do it myself.
thanks
Sean

sean:
Commercial data recovery services are very expensive and unless your data is extremely valuable to you, it may not make sense economically. If you would like to pursue that avenue you can do a Google search for data recovery or something like that and you will come up with some of them. There are a number of utilities that will recover data from sometimes seemingly dead HDDs. Here are three of them:
FileSalvage
DataRescue II
Virtual Lab
All three of these offer demo versions, which you can download and see if they find the files for which you are looking. If one of them seems to locate them, you can purchase it online and download it, or buy the software on CD and proceed to rescue your data. Dr. Smoke's FAQ Data Recovery offers helpful advice on how to do this.
Please do post back with further questions or comments.
Good luck
cornelius

My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.

Drive makes noise at home, not at the genius bar!

Similar Messages

Maybe you are looking for