Drive to 9 Promo support in CCW problem

Hello,
I built a CCW order for 'Drive to 9'  for a customer with active UCSS upgrading from 6.1 to 9.1 and I will use the License 'bump up' for 264 existing users.  Where UCL becomes BE-UWL.
I am also adding 209 new BE-UWL licenses in the same project.
Notice what CCW does.   It groups the UCSS for both components together.   This is a problem since ONLY to Drive to 9 Upgrade existing users wiill get the 78% off UCSS purchased at 5 years.
The net new users I am adding wont enjoy the discount, so I will want to keep that as 3 years.
CCW doesnt allow this.

Hi Steven,
Please be informed that if a customer is adding new users  at the same level as the bump up of existing users, Cisco Approval Team  will allow the 5 year offer to be applied to those new users as well. That way, the UCSS team stays consistent and it encourages the customer to buy additional new users.
If you need further assistance on this, you may send an e-mail at [email protected]
Thanks and Regards,
Jen C.
CCW Support

Similar Messages

  • The technology or driver used does not support reverse engineering MySQL

    Hi all,
    I have a little problem.
    When I am trying create a mode in Designerl based on a MySQL Data Store that is created in the Topology manager, I get an exception stating;
    "The technology or driver used does not support reverse engineering
    java.lang.NullPointerException
         at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
         at com.sunopsis.dwg.reverse.Reverse.setMetaData(Reverse.java)
         at com.sunopsis.graphical.frame.b.ip.a(ip.java)
         at com.sunopsis.graphical.frame.b.ip.a(ip.java)
         at com.sunopsis.graphical.frame.b.hq.b(hq.java)
         at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
         at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
         at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
         at java.lang.Thread.run(Unknown Source)"
    I can see the table I want to reverse from when going into the the tab "Selective Reverse" but it the reverse fails with the error message above.
    I would really appreciate any help on this topic. I am using MYSQL Server 5.1 and ODI 10.1.3.5.
    Thanks in advance
    Peter

    Hello,
    it seems to be working now. The only change I did was to increase the java heap size, but it feels a bit strange that it should have anything to do with the problem in question.
    Anyway thanks very much for your help.
    Best Regards
    Peter

  • HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

    Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

    Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
    So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
    More information on these topics can be found here:
    How do I set up Time Machine to a shared drive on another Mac?
    How do I set up Time Machine to a Time Capsule or Airport Extreme?
    "Rotating" Time Machine backup disks

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

  • I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

    I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story...............         iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

    My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

    Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
    Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
    Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
    Quit and you should be able to install OS X now with your Apple ID and password.
    see
    http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • Nv driver has no 3d support: What exactly am I giving up?

    I am currently running arch on a system with an nvidia graphics card using the latest proprietary driver, but I would like to know what I would be missing if I used the "nv" driver instead. I know the nv driver has no 3D support, but what exactly does that mean? No Compiz? Pfft. I use XMonad and the most graphic-intensive thing I do is watch YouTube videos. Will I be able to do that with 2D only? What kinds of things does 3D support actually give?

    Ok. I don't even use compositing since I don't use transparency anywhere, I don't use xscreensaver (I just turn off the display), and I don't play games on Linux. Awesome!
    I'll keep an eye on nouveau. It seems a bit too early for everyday use.
    The main reason I wanted to know this is that I actually have two graphics cards in my machine, one which uses the nvidia driver and the other which uses the open source intel driver. It would be easier to make a script and switch between these two if both drivers were open source and didn't conflict with each other. Hopefully this works well.
    Also, I was considering trying FreeBSD out for everyday desktop usage. I've heard a lot about it and it's just left me confused. The thing I do know is that the proprietary nvidia driver is not supported on amd64, which is a huge shame, but the open source drivers are.
    Thanks for your help! I'm off to try the open source drivers... tomorrow.

  • On Nov. 22, after having to erase and restore my Western Digital external hard drive (per WD tech support) then rebacking up the iMac, noted that three events put in iPhoto in Sept., Oct.

    On Nov. 22, after having to erase and restore my WD My Passport for Mac external hard drive (per WD tech support) then rebacking up the iMac, I noted that three events loaded into iPhoto in Sept., Oct. and early Nov. had disappeared. They certainly had been there because I printed out several images from these events.  Now they have vanished but everything through August and after Nov. 22 is there. Seems impossible. How  could something disappear from the hard drive? Apple tech was unable to explain or provide a solution. Has anyone else ever had something like this happen?

    How did you reformat the EHD? It should be OS X Extended (journaled) with ownership set to be ignored.
    If the drive is formatted correctly do the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.

  • SPF is not supported SCVMM cluster problems, when repairing ?

    SPF is not supported SCVMM cluster problems, when repairing ?

    See:
    *http://forums.sdn.sap.com/thread.jspa?threadID=2056183&tstart=45#10718101

  • Will the Linux GPIB driver be updated to support PCMCIA cards?

    Kernel 2.4 appears to fully support PCMCIA. Will the NI Linux GPIB driver be updated in the near future? If not, I am considering the INES GPIB card.

    Right now there are no plans to add PCMCIA support to the Linux GPIB driver software, which currently supports AT-GPIB/TNT, PCI-GPIB, and GPIB-ENET/100 products. Adding this support will depend on the scope of demand for it.
    The following page contains information on the currently supported products:
    http://www.ni.com/linux/ni488dl.htm
    Regards,
    Geneva L.
    GPIB/Serial Product Support Engineer
    National Instruments
    http://www.ni.com/support

  • I have an Epson Workforce 840, is there a driver update that will support AirPrint?

    I have an Epson WorkForce 840, is there a driver update that will support Airprint?

    I ended up buying the Lantronix Print Server, home version (about $100). It worked OK until iOS 7 came out, but then had to be manually upgraded, in order to function. I still have to reboot it sometimes, and it is slow to start printing.
    Thanks for your reply.
    MiataMama

  • I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

    I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
    As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
    Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte  hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
    Feeling vulnerable. Please help.
    SusaninNY

    From the menu bar, select
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Safe Mode and test.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • Can`t install idt / no sound / missing driver component (THE USUAL **bleep**IN IDT PROBLEMS)

    Hey, 
    first of all i want to excuse my vulgar language (aswell as my orthography), but honestly? 
    since around one week i got serious problems with my sound drivers, i have tried many things to resolve these issues already and am now close to despair browsing these forums thinking whether or not i should just throw this laptop out and never go back to hp.
    how it all started:
    So i will try to start over. Since last week my audio fails and i encountered various problems while reinstalling the drivers, reinstalling the BIOS, reseting my laptop to factory settings and practically trying everything.
    It all started with me being unable to adjust the volume and beats audio not responding. i shortly before tried updating to windows 8.1 though i doubt this update had anything to do with the issues (after rerolling to factory settings later that week the problem reaccured). the sound just vanquishes shortly after a restart. restart problems began to appear 
    Symptoms:
    -generall:
    Failing Sound
         - Windows displays sound in the sound regulating system but there just isn`t anything to hear
    Failing reboots (yes and this one is freaking me out, my laptop sometimes goes into blackscreens when trying to restart. if shutting down and booting this problem is unexistant. but yet i am very rarely able to restart the computer with the corresponding function. sometimes it works without problems though. )
    -IDT:
    since a day i get the massage that the detected hardware isn`t supported by the software package. i never got this massage before during tons of idt installations. since estimatedly the same point in time beats audio is unexistant and i run on windows default audio drivers.
    -Default drivers:
    sound very quiet and aswell vanquishing completly after some time
    what i tried up to now:
    i tried downloading drivers directly from here and i tried repairing them with the HP recovery manager, i tried reinstalling pretty much every driver, in my IT-incompetence just making sure there isn`t some problem with how other drivers cooperate with the idt audio codec. espacially the fingerprint driver was giving me headaches since this totally irrelevant **bleep** wasn't working since quite some time and somewhere on the net i saw a support thread about faulty validity drivers being the cause for other problems. i also, as suggested, tried random power resets inbetween the hundret restarts i have run, to no success. i rerolled to factory settings and still the sound would be no more, shortly after rebooting.  sometimes deleting random (not realy that random, more like it have been many and i can't say wich shutdown was successfull anymore)  prozesses helped, and i suddenly had cound again, sometimes deleting some programs like the fingerprintscanner driver or others, helped and restored the sound for a longer period, but in the end, it faded once more. 
    a short brakethrough was the chipset driver reinstallation, providing me with sound for estimatedly 2 hours.
    but right now, i don`t know what to do anymore since i have no idt driver whatsoever on my pc at the moment and i can`t instal one. also i am to ennoyed to perform another reroll.
    to the support administration (If something like that is existant):
    SERIOUSLY i found TONS of people describing nearly the same problems and i was always enlightened by the helpfull Hp employees redirecting every last one of them to a driver link that neither changed anything.
    Please don`t misunderstand me, i know you guys might want to help, and this defenitly isn't ment to criticise any one who tries to help in these forums. But not even one of the corrresponding threads recieved a solution? PLS HP JUST TRY to **bleep**ing answer what the hell is goes on with your Audio devices. 
    i will post this as it is right now since i have no time to recheck if everything is said. maybe later. gotta go. hope someone can help.
    cheers.
    desperate
    PS.: system information c+v :
    OS-navn Microsoft Windows 8
    Version 6.2.9200 Build 9200
    Anden OS-beskrivelse Ikke tilgængelig
    OS-producent Microsoft Corporation
    Systemproducent Hewlett-Packard
    Systemmodel HP ENVY TS 15 Notebook PC
    Systemtype x64-based PC
    System-SKU E2T53EA#UUW
    Processor Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, 2401 Mhz, 4 Kerne(r), 8 Logisk(e) processor(er)
    BIOS-version/dato Insyde F.24, 27-08-2013
    SMBIOS-version 2.7
    Version af integreret controller 147.72
    BIOS-tilstand UEFI
    BaseBoard-producent Hewlett-Packard
    BaseBoard-model Ikke tilgængelig
    BaseBoard-navn Hovedkort
    Platformrolle Mobiltelefon
    Sikker bootstarttilstand Slået til
    PCR7-konfiguration Binding er ikke mulig
    Windows-mappe C:\Windows
    System-mappe C:\Windows\system32
    Startenhed \Device\HarddiskVolume2
    Installeret fysisk hukommelse (RAM) 4,00 GB
    Fysisk hukommelse i alt 3,78 GB
    Tilgængelig fysisk hukommelse 1,96 GB
    Virtuel hukommelse i alt 7,28 GB
    Tilgængelig virtuel hukommelse 5,26 GB
    Plads til sidefil 3,50 GB
    Sidefil C:\pagefile.sys
    Hyper-V - VM-udvidelser af overvågningstilstand Ja
    Hyper-V - Udvidelser af adresseoversættelse på andet niveau Ja
    Hyper-V - Virtualiseringsaktiveret i firmware Nej
    Hyper-V - Forhindring af datakørsel Ja

    Okay while i still got no answer in this forum my problem becomes harder and harder to track down for me.
    i just installed a BIOS update (it was recomended by the hp assistant) wich ran smoothly untill i first got a litle concerned when seing a -maybe just misleading- text panel. It was just after the BIOS update was completed, and i have been informed not to turn of my computer during some minutes in wich the screen may stay blank and various LD lights might blink. It initiated, just like i thought it would. The screen went 2 times from enlightened black to black while keyboard LEDs flashed. So far so good.
    But than this blue panel shows up saying "Flashing Boot Block", nothing flashes for a while in wich a progression is shown in percentages underneath this very panel.
    Now to get back to the Topic: WHY is my Soundcard or Driver again DEINSTALLED after this BIOS update??????
    I had it before! it still stopped working -the sound stopped- some times but it was there!! and it might well work the next time i open my laptop to watch a video listen to music or play a game! So why is it gone after this BIOS update? i will ofcourse check if i may now install the drivers for my Product but i am not confident that it will succeed.. lets hope so... 
    I just try to understand what is going on and therefor a short explaining answer to some of the questions i hinted to within my posts would be very appreciated. 
    Best regards, a believing support forum user..

  • External hard drive connected to mac Mini is having problems and won't repair

    Hi,
    Thanks in advance for any support.
    My Mac mini (OS 10.7.5) isn't reading the external drive correctly and sometimes doesn't find it at all. When it does find the drive, some folders which I know to be large show up as empty (not always the same folder, I think).  I'm quite sure the drive is having problems and want to repair it, just so it can be stable enough to duplicate (i.e. copy the external).
    But it won't repair in Disk Utility because it can't unmount. I tried turning off Spotlight via Terminal, but it still won't unmount. Any suggestions?
    Thanks

    Hi Linc,
    Thanks for the reply.
    Do you mean installing it in another enclosure? How easy or difficult is it to move the drive -- and should this be done by a professional?
    Thanks

Maybe you are looking for

  • 2 problems: 1st unopened messages, 2nd cannot add personal email in setup wizard

    Hi guys, I'm having a problem with my device. It seems like I cannot add a personal email adress in my email setup (from the setup wizard) When I enter this setup wizard > email setup the following appears: email setup select an email setup option [

  • XML sent when set for PDF

    Hello, I received an XML file from an end-user when she emailed in our online fillable form. The thing is that it's designed to send a PDF and in fact I get PDF's from everyone who uses it except this time from this one end-user. Any thoughts on why

  • Pipeline Materials (Info Record) Cost not getting picked in Standard Cost

    Dear Team, We are using the Pipeling Materials Concept in our client. Pipeline materials are procoured without referene to PO/Quotation. Pipeline materials cost is not getting updated in the the standard cost estimate in cost roll-up. All Sub-strateg

  • Installation failed exit code 34 error DW051

    Exit Code: 34 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW051 ... -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 1 error(s), 0 warning(s) ERROR:

  • Backup SMS texts from Blackberry to PC?

    Hi there, Is there a way I can backup or transfer my SMS text messages from my Blackberry Pearl to my PC?  I have a large number of texts, and there are important ones that I want to save to PC - that will save the timestamp as well as the text itsel