DRIVE TO TOUCH SCREEN - WINDOWS 8

Hi.
I've installed the windows 8 on my HP TouchSmart 520-1050 and the touch screen stoped your function. I didn't find its drive. What to do?! The HP will create a specific drive to this computer? Waiting for answer.
Thanks!

THIS is HP's position on Windows 8 support and any HP computer not supplied with Windows 8;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
Screen Resolution Requirements
Limitations with DVD playback software
Limitations with Blu-ray playback software
Limitations with TV Tuner software
Secure Boot & other UEFI dependent features
Secure Boot & other UEFI dependent features
Limitations with touch screen capabilities
Windows 7 PCs with touch screens will not have full Windows 8 touch capabilities after upgrade.
HP PCs with touch input hardware designed for Windows 7 will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points.
Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7.
HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Twist - Resolved all driver, WiFi, touch screen, version and battery issues through Windows Refresh

I would like to report that I also had many of the issues mentioned in several other posts and solved them all by doing a Windows Refresh.
In particular, the following issues were resolved:
- Missing driver for WAN miniport device
- Intermittent connectivity on WiFi
- Unresponsive touch screen (charm-swipe was not working anymore)
- Version mismatch of Lenovo Settings
The computer is now absolutely stable and faster than before. Furthermore, first impressions seem to indicate that the battery life has also been significantly increased by the refresh.
What I did:
- Performed Windows 8 Refresh
- Installed all Windows updates (several rounds of updates and restarts)
- Reinstalled all non-Windows 8 applications (Windows Refresh keeps/restores only your data and Windows 8 apps)
- Performed disk cleanup (including system files) and disk optimization
The whole process took me a good half day but was well worth it. Twist runs like a charm now, without any issues.

Windows Refresh generates a detailed list of all desktop apps that were removed during refresh. That list includes links to the manufacturer of each app and makes it quite easy to reinstall them.

What tool or driver handles touch screen facility of Satellite U920T

Hi
From the list of drivers available for the Satellite U920T notebook, which one handles the pen and touch screen facility?
Cheers
Alfred

An essential Toshiba software/tool which needs to be installed for Win 8 and Windows 8.1 is Toshiba System Driver.
But Win 8 and Win 8.1 provides own drivers to control the 10 finger capacitive touch screen.

S400 Touch - Driver for Touch Screen

I'm on the Driver Download page for the S400 Touch, but I have no idea which driver is for my touch screen. There are display drivers and mouse/touchpad drivers, but neither of them say anything (at least I don't see it) about the HID touch screen. Running Windows 7 64bit.
Any ideas?

Hi DJwhiteSquall,
Welcome to Lenovo Community!
As per the query we understood that you are looking for the display drivers for your Lenovo S400 touch laptop.
As per the specification of this laptop has AMD Radeon 7450M Graphics card, however please share the serial number of the laptop through private message as this help us to assist you in better way.
Click here to send the private message.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Touch Screen windows 8 internet explorer

The computer has 2 different types of internet explorers. One is in the desktop area, this is the normal internet explorer browser. Then the 2nd one is the the apps start window, this internet explorer is the new version for easy touch screen use. But when I touch that one it automatically takes me to the desktop and opens that old version.

Hello gaby:
Welcome to HP's forum boy I am happy to have Windows 7 computers and Vista earler addition computer. Windows 8 is a complete night mare. You can post your issue here on Microsoft web-site http://answers.microsoft.com/en-us/ie/forum/ie9?auth=1 for more exposure may be some there might answer it. This is Microsoft direct support most deffently will fix your issue. https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d31903... I guess no has ran into this issue yet here. I would hate to see you wait a long time for an answer. This is a Microsoft software issue. Good luck I hope they can fix it for you so you can enjoy your new computer. You are welcome frrw.

Touchsmart 600 - 1220SC - no win 8 x64 driver for Touch screen

I cant get my Touchsmart 600 - 1220SC working with Win 8 enterprise X64.
The pc is up and running but it cant find any drivers for the touchscreen.
I have tried to remove the device and made a reboot - no difference.
Win 8 is activated but still no drivers in windows update - not even as an optional download.
Anybody know where to find the driver ?
Regards
Peter

Have you tried enabling all "Optional, Recommended, and Important updates" in Windows Update??? Activate Windows 8, reboot, enable all updates in Windows Update, and see if one exists.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Screen won't wake up after long sleep. HP Envy All-in-one, no touch screen, windows 8

If asleep for a short time (+ or - 30 mins), it wakes up. For a longer time, the computer comes alive, but the screen stays dark blue. If I wait two minutes and then move the mouse or space bar, the screen comes up.
I worked through the on line help, changed several settings, but it did not help.

Hello Ken900,
Please take a look at this document, which provides troubleshooting steps that I hope, will help resolve your 'waking up/freezing' issue.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Please let me know if this helps resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Windows 7 Touch Screen and Video Drivers for HP Pavilion tx1219us

Updated to windows 7 and can't find drivers for the Video Driver and Touch Screen. Can anyone help me?

Bummer...
That is even an older GPU than the GMA 900.
It is an Intel 82852/82855 GM/GME Graphics Controller.
OK... I have a possible driver you can use for that. No guarantee it will work great but it should work...
Here is the link to my OneDrive folder.
https://onedrive.live.com/redir?resid=832F4957D2E51B93%21263
Download and unzip the file labeled Intel 82865g Driver (Vista - Win7).
You have to use the manual install method like you did with the other 2.
Good luck!

Excel 2013 BeforeRightClick Event fails on Windows 8.1 Tablet (it's an Excel 2013 tablet touch screen interface bug)

I have developed customized table context menus in an Excel 2013 workbook on my Laptop. They work just fine on my laptop and my work desktop. But when I try to run them on my tablet PC the Worksheet_BeforeRightClick event in Excel 2013 never fires. Other
worksheet events appear to work okay. I have fully reinstalled Office 2013 Pro and that does not make any difference.
I have read other comments regarding this same problem going back to 2013, but have never seen Microsoft respond to this issue. Nor have I been able to find a resolution. Has anyone else run into this and found a solution?
Additional Discoveries: Testing on my tablet shows that adding one custom CommandBarButton to either the top or the bottom of the default "List Range Popup" context menu causes the Worksheet_BeforeRightClick event to fail. The basic context
menu commands still show up, but the default dropdown button for additional context menu commands disappears. The event is perhaps firing, but any customized code for the context menu is not being handled properly by Excel. This does appear to be a bug and
not a question of coding error. Perhaps someone else with a tablet PC running WIndows 8.1 could test this.
Based on comments
here this bug was introduced in Excel 2013 because others find the problem does not exist when using Excel 2010 on a tablet PC. Note that all the commenters on the linked thread that are experiencing this problem are using tablet PCs.
Update 3-13-15: I stand corrected. The Worksheet_BeforeRightClick does work on Excel 2013 Windows 8.1 tablets. I happen to own an Asus VivoTab Note 8, which comes with a Wacom stylus. If I use the Wacom sylus to right click on an Excel 2013 worksheet cell,
the Worksheet_BeforeRightClick event fires and modified context menu code runs just fine. But the code will not run if one uses their finger to right click a worksheet cell. This explains why this problem only shows up on tablet PCs. So the "bug"
introduced in Excel 2013 is a general user touch screen interface bug and not an Excel events programming bug.
Update 3-21-15: Switched to a Toshiba Protege laptop with touch screen. Same issue with finger touch screen interface on the Toshiba touch screen as with the Asus VivoTab touch screen.
Laptop: Toshiba Protege (with touch screen), Windows 8.1 64bit and MSOffice 2013 Pro 32bit
Tablet: Asus VivoTab Note 8, Windows 8.1 32bit and MSOffice 2013 Pro 32 bit
Desktop: Generic, Windows 7 64bit and MSOffice 2013 Pro 64bit
phillfri

Hello Phil,
Command bars were deprecated and shouldn't be used any longer. Instead, you need to use the Fluent UI (aka Ribbon UI) instead. You can read more about the new UI in the following series of articles in MSDN:
Customizing Context Menus in Office 2010
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)
As a workaround you can add a custom control to the context
menu with the getEnabled or getVisible callback which will be invoked before the context menu is shown.

Touch screen from windows to mac

If I have a touch screen windows computer and I install mac with VMware with the touch screen work?

It may depend on vmtools support for your hardware. Might try them here.
https://communities.vmware.com/welcome
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Individual Emails do not open in Windows 8.1 with A Touch Screen

I cannot open individual emails in my Xfinity email account using the touch screen. Using my touch screen I am able to log in, and change the view to the full email list, but when I attempt to screen-click on any one of the listed emails they will not open. If I start to use my mouse in the same session they do open. I have this issue with two different laptops with touch screens, Windows 8.1, and Internet Explorer 11. Changing to the compatibility view in IE does nothing. I also have the same problem on both machines using Firefox (Version 26.0) as my browser; the touch screen will not open the emails, the mouse will. I am using the browsers to go to Xfinity.comcast.net to log into my account.

The one machine that I'm the most concerned about is a Dell XPS 15 9530. I have checked all the touchpad (Synaptics) settings; nothing's unusual. Comcast email is the only page I've had problems with.

In win 7 multi touch screen on Pavilion dv3 2370ee is not working unable to find drivers in HP

I restored the Laptop and the Touch screen stopped functioning completely I have tried all the available drivers on HP but the Touch screen is not functional, I am running windows 7 64bit Home eddition,
In HP Assistance there is no Driver updates found.
As a last resort i googled and it diverted me to http://www.official-drivers.com/installer/?seed=hp&gclid=CMCi9MDS26wCFcUa6wodmkEt0A which says official site for HP drivers and looks a like HP website and demanding us to pay, is this a HP site and do i have to pay for the latest driver update.
This it the screen shot for device manager.
Can some one guid me through.
regards
Manoj

The problem was resolved,
I did 4 things i am not sure what made it to work
1) I installed the WACOM driver for touch screen and pen.
2) Installed win7 SP1 (restarted but not functional)
3) Installed 10 to 12 HotFix from microsoft site.
4) I uninstalled the Synaptics Pointing Device Driver.
At last i restarted the pc and it started working.
regards
Manoj

Touch screen thinks it's a pen

I have a Sony Vaio Duo SVD11225CXB running Windows 8.1. The original problem was that it had the "pen" single click pointer and kept getting stuck in various corners of the screen. (At the time, I did not know that the pointer showing a tiny star surrounded by a white circle was a pen pointer.) I then uninstalled the USB device driver for the touchscreen to disable it and could not find the driver again. That issue was resolved in my previous post. Now, I am running into a new problem. When I click on the screen, it ends up highlighting the area I am clicking, but doesn't result in an actual click. So clicking the start menu, the x in the corner doesn't do anything. Just so everyone is clear, this is the icon I see is this singe-tap pointer: http://i.msdn.microsoft.com/dynimg/IC106593.jpg. I would like to know how to disable pen completely. This computer does not have a pen, so it doesn't make sense. However, if there is a better solution, I am all ears.* Thanks. *There may not be a way to disable pen exclusively as it's rare to find a computer that has both, so please do not let my request above pigoeon hole you into trying to find a way to disable pen input.

Hi herschen,
Welcome to Sony Community!
Kindly try to look for any Pen/Digitizer driver from Device Manager. Look under Human Interface Devices. If you see pen driver, right click and select Properties -> Driver -> Disable.
You may also try to reinstall Touch Screen Driver. Under Human Interface Devices, right click the driver for touch screen and select Uninstall (DO NOT DELETE). Restart the laptop.
Update or download drivers from eSupport website, especially Touch Panel Calibration Tool.
Hope these help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

LOST Touch screen DRIVER after WINDOWS 10 UPGRADE.

Hi I want to ask if the problem about the lost touchscreen HID driver after Windows 10 has been resolved...

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

TX2616au touch screen doesn't work after upgrading to windows 7

Hi,
I just got my TX 2616AU multi-touch tablet few days, it came with Windows Vista ,and the WACOM touch screen worked perfectly, by the pen and my finger as well.
I got a Windows 7 Ultimate and decide to upgrade the system. The upgrading process was all right, after the upgrading everything worked fine but the touch screen. It didn't response my finger-touching any more, worked with the pen but the pen was running crazy.
So I downloaded and installed ALL drivers for Windows 7 from HP website for this model tablet, everything looked fine but the problem's still there. I searched internet and followed some advice, downloaded the driver from WACOM for Windows Vista and installed it, it reported a error, gave me a BLUE SCREEN then restarted and then the pen got back to normal, thanks GOD! But it still refused to response my finger-touch, Im out of idea...
Any suggestion would be appreciated!
Ted

Hi
I think the Flash Card support Utility and the Value Added Package would solve the issue but Im not quite sure if the links posted by Jeka are right
Please visit the Toshiba European driver page and choose your notebook model.
Then download the Flash Card support Utility and the Value Added Package for Win 7 64bit!!
Ensure that VAP should be installed at first and then Flash card support utility

DRIVE TO TOUCH SCREEN - WINDOWS 8

Similar Messages

Maybe you are looking for