Drive/Update Error problem

Need help, please My WD MyBookLiveDuo has always worked well and I keep it updated. But I was was gone for a few days and got two messages:  Drive failedDrive failed in location AMon 13 Jul 2015 07:28:24 PM CDTSystem restartThe system has restarted.Mon 13 Jul 2015 07:28:41 PM CDT Got home, green light blinkiing quickly. Checked for updates. Message said "Firmware Update Version found :
MyBookLive 02.43.10-048 Tried update and got message: Error 31107 Be sure both drives are installed; Update did not complete.   

Looks like one of your disks failed.  You will have to buy a replacement disk.

Similar Messages

  • Boot Camp driver update error

    I keep getting Error code 1603 whenever I try to install the boot camp driver update under Windows Vista, it says something about a restart pending in the event log but I've restarted twice and it hasn't changed a thing, is there any way to fix this?

    right click on my computer, go to manage, then to device manager.
    Under display adapters, remove everything, may ask to reboot, try rebooting or just run installer again.
    This fixed it for me, i tried so many things before i found this fix.

  • Driver Update Error

    Did a clean install of XP Pro last week. This morning, I updated the driver for my XF-I card to ver 2-8.0008. When I rebooted I got a Fatal Error box pop up, RegOpenKeyEx() Failed. It looks like it is tied to the Vol Control Panel.exe. I went to the Creative menu in the Start up menu and clicked the Volune Control Panel Icon and an error popped up saying"Failed to load". The Vol Panel icon was in my system tray before the driver update but not now. Any fixes for this issue other than uninstalling and reinstalling the XF-I CD software? Thanks.

    ? A little background on what caused this mess in the first place. I have an aircraft add-on which required a newer sound driver than the one that was on my X-Fi CD. I downloaded the latest driver from Creative ver 2-8_003 and installed it after removing the older first in the Device Manager. When I rebooted, that is when I got the Vol Control Panel error. Also, the Creative Console Launcher wouldn't launch. I figured it might be a corrupt driver download.
    So, I went back into the Device Manager and deleted the driver I had just installed. Then I uninstalled the Soundblaster X-Fi program in the Add/Remove Program. I then inserted my X-Fi CD and did a Custom Install choosing what applications that I wanted to install (minus the Driver).
    After that was done I installed a previous driver I had saved ver 2-8_008. Rebooted and all applications worked correctly. Hope this makes sense.

  • HP Elitebook 8560p driver update error: IDT High Definition (HD) Audio Driver

    Hi there,
    Hoping someone can help.. 
    So I tried updating/installing the latest IDT Audio driver for my Elitebook 8560p, but get this error each time:
    I'm pretty sure this is because I stupidly uninstalled IDT soon after getting the laptop.. I did this because I use a seperate audio interface for recording music and didn't want any conflicts. I didn't realize uninstalling this would disable the internal audio entirely (and irreversibly it seems)! My audio still works when I connect my external audio interface, but this is quite annoying as I have to bring the interface with me everywhere, like I can't just watch a Youtube video and listen through internal speaker OR headphone output..I have to hook it up to my interface each time..urgh. My own fault I know, but I would have thought this driver installation package would work and put it back on my system..
    FYI, I'm running Windows 7 Home Premium 64bit.
    I remember reading a thread about this eact same problem ages ago, someone had done the same thing and was having the same problem re-enabling//re-installing it. I think he managed to find a fix that worked for him that involved removing the battery and holding the power button for 30 seconds, or something along those lines.. I remember trying that method by copying his instructions step-by-step, but it didn't work for me
    Anyone else, or any HP tech support know any kind of fix for this? Fingers crosed.
    Many thanks for any help or advice in advance!
    Lauren

    Hi
    Try installing the driver from the link given Accept the license agreement below restart the unit check in device manager if the driver is detected. Also update the Bios restart the unit and check.
    Link
    Bios
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Illustrator CS6 Update Error Problem

    Hi, as I have a problem with my Adobe Illustrator CS6 (Spanish Version) in Windows 8.1 Pro and me is that when I'll update via Adobe Updater, I get the following error:
    Actualización de Adobe Illustrator CS6 (versión 16.0.3)
    Error de instalación. Código de error: U44M1P7
    I appreciate any help you can give me. Best Regards.

    Do not think I have not, and the only advice I've found as I've done but still the same.
    1 * Uninstall the program and reinstall.
    2 * Download the update and install it manually.
    3 * Update the Adobe Application Manager.
    I've done all this but still gives me the same error. All other applications if I updated correctly.
    That is why I ask here in the community to provide support me.

  • Audigy 2 ZS driver update error mess

    While trying to update the driver for the Audigy 2 ZS card I get the following error message:
    "Setup did not detect a driver version that is supported by this Web update"
    Can anyone please help?
    Thanks
    Cachibache

    With XP I'm still using 2.8.000, they seem to work fine

  • Premiere Elements 10 - HD Graphics Driver Update - Error Message

    I recently got an error message advising me to update my intel HD graphics driver; I updated 5 months ago - all worked well; now I'm getting the message again, however windows says my drivers are up to date and cannot be updated - but Premiere Elements keeps asking for an updated driver; now, the edit sytem performance is horrible and I get a white screen everytime I attempt to playback video from the edit timeline. Any Solutions?

    RKV
    Thanks for the reply. The deletion of the BadDrivers.txt file is your best opportunity for a resolution. So, let us pursue that.
    If you have Premiere Elements 10 on Windows 7 64 bit, the BadDrivers.txt file is there. But....in your attachments, you show
    Program Files
    Program Files (x86)
    and no signs of Program Data where you must start in the path to the BadDrivers.txt file.
    a. Could you be using Windows 7 32 bit?
    or
    b. Are you working with Folder Options Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    In Windows 7 64 bit,
    Click on Start
    In the Search field that appears above Start, type in Folder Options.
    Folder Options text will appear at the top of that left column for you to click on.
    Clicking on Folder Options will bring up its dialog.
    Click on the View Tab of the Folder Options dialog.
    Then scroll down the list of options under View until you reach Show Hidden Files, Folders, and Drives,
    and make sure that it is selected.
    Program Data should appear in the lineup which includes Program Files and Program Files (x86).
    Please let us know the outcome.
    Thank you.
    ATR

  • WPD Filesystem Driver Update error!

    I have recently bought a 120GB Classic and it works okay, syncs okay, and is recognised by both the PC and itunes, but every time i connect it, my computer tries to update/install driver software for the Microsoft WPD Filesystem Volume Driver, and every time it fails, telling me to contact the manufacturer in order to resolve the problem.
    I've since scoured the internet for possible solutions, and none have worked so far. I need to get this sorted out ASAP as it's becoming very irritating each time I sync my ipod!! Has anybody else suffered this problem, and if so, how did you resolve it?

    Well I'm very pleased to say that I've managed to stop this from happening, and here's how:
    1.Open Start Menu and right click on Computer
    2. Select Manage which will open Device Manager window
    3.Right-click on the unknown device symbol (which should have a yellow exclamation mark on it)
    4.Select Disable
    Problem solved.

  • Superhard drive update errors after download

    I've downloaded the update I know at least 20 times and after the download I get an error message. I've followed the instructions to go in App>Utlities> Superdrive update app and get an error occured during download. What gives?!?!?!?!

    Hi dmoretton,
    We need more details about your system transfer process. Since third party clone software frequently cause system corruption and it’s not fixable, We only recommend two ways for system installation on new hard disk: performing a clean install or using windows
    system image restore and both ways need reactivate Windows 7.
    Please make sure you were using windows system image restore for transmission and Windows 7 has been reactivated
    If you used third party clone software for transmission, we recommend that perform a new install for your new hard disk.
    Regards

  • Video Driver Update Error

    I have a new iMac 27 with a nVidia GTX 680MX Video card. While I got everything installed correctly regarding Windows 7 (64) and all the drivers from Apple, I am trying to download a newer version of the 680MX driver from nVidia. I tried to install the new driver, and I get an error message saying that it cant locate a compatible card.
    I doublechecked the selections and am downloading the 600 series driver. Is there another driver that I should be looking for? Or does someone have a link where I can get the correct one?

    What does Device Manager show?
    Link to the 600M version driver?
    What is the graphics WEI performance show?
    There use to be trouble, but I thought those issues were a thing of the past.
    The iMac 27" use to also be known for black screen on restart  after Win install.
    Version
    314.22 - WHQL
    Release Date
    Mon Mar 25, 2013
    Operating System
    Windows 7 32-bit
    Windows 8 32-bit
    Language
    English (US)
    File Size
    167.25 MB
    http://www.geforce.com/drivers/results/59644
    Don't use the auto utility. 

  • Problem with Latest Epson Printer Driver Update

    I installed the Epson printer driver update that came out today, but it made absolutely no difference. My Epson printer is still using a the same old Epson driver plus Gutenprint. There is no other option. I don't get it. What's the point of installing the update if the printer is still stuck with Gutenprint? My printer (Epson Stylus Photo R340) is supported according to Apple's list.

    alansky1 wrote:
    Thanks for that tip, John. I found the "Epson SP R340 series" driver by searching for it as you suggested.
    Happy to help Alan.
    HOWEVER, I cannot print with this driver. I get the following error message when I try to print:
    Error: Library/Printers/EPSON/InketPrinter2/Filter/rastertoescpll.app/Contents/MacOS/r astertoescpll failed
    This seems common with the Epson drivers, there are several posts here with that problem. Some users have had success deleting the printer from Print & Fax Prefs and adding it again using the Epson (non-Gutenprint) driver. Others have had to delete the <hard drive>/Library/Printers/EPSON and /Library/Caches/Epson folders, re-download the update, then re-add the printer.
    I would try the first one first since it's the easiest and you already have the update installed. If that doesn't work, the second should.
    Hope this helps.

  • [Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.

    Hi,
    I am getting following error message ,
    [Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.
    When run this code.
    <%@ page import= "java.sql.*"%>
    <%
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb");
    Statement st = con.createStatement();
    st.executeUpdate("update tscipshift set 11-Aug-08='M' where TechN='Elamparuthi'");
    %>
    tscipshift=table ,column=11-Aug-08 are all exist.
    I dont know why I am getting error mesage.
    Any idea why?

    Shahbaz2008 wrote:
    you haven't set your user name and password hereI don't believe that's necessary with Access. Then again, it's not an enterprise database.
    Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb");
    change it to this
    Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","+username+","+password+");
    here pass your username and password...
    In Oracle default user name and password is
    username = scott
    password = tigerSo who uses that? Only an eejit would leave that account open.
    So the statement would be
    Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","scott","tiger");
    or In Mirosoft Access there is no user name and password so the statement will be Like I said - unnecessary, and not the reason the OP is having problems.
    Connection con = DriverManager.getConnection("jdbc:odbc:bspipdb","","");>
    Besides this change your table name 11-Aug-08 to anything that is not start with number or any special symbols.
    for example aug112008 is good or aug is too good.No, it's still not good if you understand ANYTHING about relational databases and normalization.
    I think it would work.I think you're just as stup!d as the OP.
    %

  • HELP Adobe flash drive update BUG?? Big Problem

    I bought a 13 inch MacBook Air in August 2014.
    OS X Maverick, Version 10.9.4. 4 GB memory, 256GB storage.
    I have been using Safari to see lecture videos from Echo360, and they have been working well despite the slow internet of the country.
    Just until two days ago, everything had been working fine, until a Adobe Flash Driver Update popped up on my screen.
    At first I ignored it (b/c I usually dont care about using the latest versions; the lecture videos had been working perfectly)
    but it kept popping up so I clicked update.
    The next day, my mac kept losing connection to internet every 1-3 minutes, such as "resolving host" messages.
    The videos kept crashing and I had to re open the page, refreshing wouldnt work. about 15 times for a 50 minute video.
    I erased the Flash Driver.plugin from my internet plug-ins in the library, and the internet came back alive.
    I was guessing the "updated" plugins were eating up my internet/browser...
    So then I downloaded chrome so I wouldnt have to manually use adobe anymore,
    and now, the videos keep freezing at random moments at about 5-10 minute intervals. Now that the internet is back alive, i just have to refresh the page, which still takes forever to load...fortunately the browsers dont crash anymore...
    Right then, I completely disposed anything related to adobe flash drive. I still have Adobe pdf which works great.
    But even after, it kept freezing...
    Maybe I was thinking this is normal when watching videos on chrome b/c the plug ins are not manually stored in my mac?
    If not, what is causing the freezing of the videos on google chrome? (i dont think my mac is losing internet connection anymore every second like yesterday)
    Is there any way to fix it? Is it from yesterday's history of downloading the "update"?
    I just want to be able to watch my lecture videos like I normally did the past two weeks, before I downloaded the "update"
    and now I am afraid that downloading adobe might crash my internet/browsers again.
    It took me several hours to come to erasing the "updated" plug ins as I am fairly a noob in computers.
    I spent a lot of time and researched a lot up till 5AM in the morning just last night.
    and I have exams coming up next week... I would really want this to be resolved.
    Should I try downloading adobe from its actual website and see what happens?
    If yes, which versions would you recommend?
    Yesterday when I checked after the update, it stated the most current Adobe 15.
    If this contains bugs for mavericks, I would rather do older versions.
    I do not know which version I was using before the "update" when everything worked perfectly.
    Thanks for reading all this
    I know I am all over the place; Im just very frustrated and desperate as not knowing what to do....
    I just want my mac to work like before I clicked on the "update"
    Any help will be greatly appreciated
    Thank you

    You probably installed some kind of malware pretending to be a Flash update. That's very common.
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ +N.+ =//p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following -  I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

    Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
    I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
    I am receiving an error problem when doing the following -
    I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
    When processing the Export I receive an error message for each of the images being exported indicating the following -
    Heading Import Results
    Some import operations were not performed
    Could not move a file to requested location. (1)
    then a description of the image with file name
    Box Save As                                  Box  OK
    If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
    To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
    Thanks if you can can help out.

    Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

  • I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

    I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

    I am experiencing the exact same issue during the installtion process for iTunes 10.5.
    I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
    I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

Maybe you are looking for