Driver 3Com EtherLink 10/100 PCI NIC 3C905C-TX-M working on windows 7 Download

working driver on windows 7
(3C905C-TX-M) 3Com® EtherLink® 10/100 PCI NIC for Complete PC Management
Choose from the following categories to download files.
http://www.3com.com/products/en_US/result.jsp?selected=5&sort=effdt&sku=3C905C-TX-M&order=desc
3c905c_4_41.exe
18 Sep 2003
0.14 MB

For Win7 64bit you have to install manually a compatible driver within in the driver collection of Win7: Choose network-adapter >>> realtek semiconductor (the 2nd) >>>
HP EN 1207D-Tx PCI 10/100
This driver is working well.
Thanks for that! Sorted my problem with testing TMG on an old machine!
well it works the device dont do shit it does in xp i write manually ip no signal unidentified network
evrytime i install that driver i get message Realtek RTL8139/810x Family Fast Ethernet NIC windows has finished installing the driver software for this device WTF IS THIS FUCKING CRAP I CHOOSE TO INSTALL SOMEETHING DIFFRENT
HP EN 1207D-Tx PCI 10/100
i am using the server 2011

Similar Messages

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Wanted: 3com (Etherlink XL 10/100 PCI nic) network adapter driver

Hello.
I would like to get help for my problem. I have an old PC (Pentium III clone)that I'm trying to revive. It does not have any onboard network adapter but has a pci 3COM etherlink XL 10/100 . I tried getting the driver throught the internet but no luck. And a number of sites that I went through has an external download site and when I clicked it directs me to HP. I finally found a site that said that HP has acquired 3Com last 2010.
So my question is: does HP have a driver for my network pci adapter for Windows XP? If yes, can you possibly direct me the download page? thank you for any help on this request.

Hi:
See if this one works...
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=PSG_I17919_100969#tab1
Or this one...
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=PSG_I6782_8315
You may have to manually install the drivers.
I haven't disassembled the files to see how one needs to install the drivers. A lot of those old drivers don't automatically install and you have to install the drivers from the device driver update tab.

Does this mean the NIC card won't work on Solaris 10?

I tried using NICs like Intel PRO/100 S and the 3COM Etherlink 10/100 PCI (3C905C-TXM). I downloaded a software from SUN, made a bootable CD, and when it scanned my PC, it says that likely my hardware will be compatible with Solaris 10 (Nov 2006). Yet,
At the beginning of the installation, I see this:
Using RPC Bootparams for network configuraton information.
Attempting to configure interface elx10 (or ipbr0)
Skipped interface elx10 (or ipbr0)
Does this mean the NIC won't work?

nope, it will probably work just fine. i had the same thing happen both while installing upon a Sparc box and a x86 box...but both go onliine...
it will ask you later if you want to DCHP or not. you can go from there.
good luck

Update for 3com etherlink xl 10/100 pci t NIC (3c905c-tx) working with windows 7

I need to download update for 3com etherlink xl 10/100 pci for complete pc management NIC (3c905c-tx) working with windows 7

For Win7 64bit you have to install manually a compatible driver within in the driver collection of Win7: Choose network-adapter >>> realtek semiconductor (the 2nd) >>>
HP EN 1207D-Tx PCI 10/100
This driver is working well.
Thanks for that! Sorted my problem with testing TMG on an old machine!
well it works the device dont do shit it does in xp i write manually ip no signal unidentified network
evrytime i install that driver i get message Realtek RTL8139/810x Family Fast Ethernet NIC windows has finished installing the driver software for this device WTF IS THIS FUCKING CRAP I CHOOSE TO INSTALL SOMEETHING DIFFRENT
HP EN 1207D-Tx PCI 10/100
i am using the server 2011

Added a 2nd internal SCSI drive into my 7500/100 does not show up.

Hi.
I added a 2nd internal SCSI drive into my 7500/100. It does not show up on the desk top. I rebuild the desktop reset the cuda and ran SCSIProbe. The computer starts up on the newly added drive. No sign from the original drive. Please help.
Walter

there are jumpers on the drives that need to be properly set. Both drives are set with the terminating resistor on, one needs to be off. Carefully note nthe placement of the existing jumpers then remove the jumper from the drive in the middle connector.

Connecting Yaskawa Sigma FSP Motor Drive With UMI-7774 and PCI-7344

Hi,
i have PCI-7344 and UMI-7774 that i want to connect to this Servo motor drive of Yaskawa.
1) How do i know if this motor drive is compatible with the pci-7344 and umi7774 ?
     for example: inside the UMI manual is written that the Motor drive must support "Sinusoidal Commutation"
     i look indside the Motor Drive manual and i dont found anything about this.
     this is link to the motor drive:
     http://www.yaskawa.com/site/products.nsf/products/Servo%20Amplifiers~fspsigma.html
     http://www.yaskawa.com/site/products.nsf/products/Servo%20Amplifiers~fspsigma.html?openDocument&seq=...
2) How do i connect the feedback and control lines from the UMI to the Motor drive?
i'll appreciate any help including posting a link to a tutorial that helps to understand the signals from the motor drive and the encoder
And also the umi-7344 (Phase A, Phase B, Hall sensor, inhibit, Fault, etc... )
Some powerpoint or Pdf tutorial that National instruments provide will help as well.
P.S. i read the manual of the UMI-7774 and the pci7344 manual, but i'm yet not understand what i need to do
in order to configure my motion system :
PCI-7344 , UMI-7774 , Motor Drive (Sigma FSP Yaskawa) , Servo Motor (Yaskawa)
Thanks for any help.
Regards,
Moti
Solved!
Go to Solution.

Dear Nate,
Thank you for repling to my posts, i really appreciate that.
The links you provide is very helpfull.
i'm enginner in my education, but not in this area (i'm information systems eng.)
i decided that i need to learn more about it (ni-imaq, ni-motion, line-scan camera, servo, servo drives, encoder signals, motion i/o, umi, pci7344, etc..)
So, i download the manual and help files that is needed to my application i want to build
(high speed machine vision of color line-scan camera connected to motion with rtsi synchronization and also digital i/o)
and now i'm reading ALL this, its huge amount to read, and not all the thing i understand in the begining (english is not my lang..)
Thanks again for the replies.
Best Regards,
Moti

Possible to drive a stepper motor with PCI-6111?

Is it possible to drive a stepper motor with PCI-6111?

Hello Tristan,
If your stepper motor is TTL compatible you should be able to control it with one of the two counters on the board. Keep in mind that the stepper will ask for a certain amount of power so before attaching it track down how much power it consumes and take a look at the Specifications of the PCI-6111 to be sure that the counters on the board can deliver that amount. If the stepper takes to much power you have to use some kind of power drive which can be controlled with digital (TTL) signals or Analog signals between -10V and +10V.
Hope this helps.
Best regards
RikP
Application Engineering
National Instruments
Rik Prins, CLD
Applications Engineering Specialist Northern Europe, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Scanning and Repairing drive C stuck at 100%. - toshiba satellite l70d-a

Hello and thanks in advance:
Laptop model: toshiba satellite l70d-a
Age: 3 months old
Problem: when loading laptop Scanning and Repairing drive C stuck at 100%. Nothing elso than removing the battery. Started suddenly. I have tried to see if there were hd problems but found nothing. Ideas?
Not sure what to do. Can anyone help?

Here i what I have found running glary utilities:
Volume label is TI80145100B.
Glary Utilities 4 is verifying files (stage 1 of 3)...
329216 file records processed.
File verification completed.
1778 large file records processed.
0 bad file records processed.
Glary Utilities 4 is verifying indexes (stage 2 of 3)...
Index entry sessionstore.js in index $I30 of file 59559 is incorrect.
Index entry SESSIO~1.JS in index $I30 of file 59559 is incorrect.
Index entry e6eccf9166454d22f9ad07abdb6da390.png in index $I30 of file 59927 is incorrect.
Index entry E6ECCF~1.PNG in index $I30 of file 59927 is incorrect.
Index entry fb70939c8ecbd4faff2338ee6c5d2529.png in index $I30 of file 59927 is incorrect.
Index entry FB7093~1.PNG in index $I30 of file 59927 is incorrect.
Index entry 44 in index $I30 of file 75218 is incorrect.
Index entry 34 in index $I30 of file 77338 is incorrect.
Index entry 8E in index $I30 of file 77338 is incorrect.
Index entry 55 in index $I30 of file 104698 is incorrect.
Index entry 02 in index $I30 of file 132634 is incorrect.
Index entry FA in index $I30 of file 140243 is incorrect.
426568 index entries processed.
Index verification completed.
Errors found. Glary Utilities 4 cannot continue in read-only mode.
CheckDisk found 1 disk errors as follows:
C:\

Western Digital WD400AAJB Caviar SE 400GB Hard Drive - 7200, 8MB, ATA-100 E

Western Digital WD400AAJB Caviar SE 400GB Hard Drive - 7200, 8MB, ATA-100 EIDE, OEM
I found this drive at CompUSA (Tiger Direct) and I wondered if it would work in my mac. Can anyone advise on this?
Yours in Mac OS X 10.4
Jose Mauricio Cuervo
Message was edited by: José Cuervo
Message was edited by: José Cuervo

Hi Kappy,
I assumed since I posted in the MDD FW800 POWERMAC G$ section that it was understood that I have a MDD FW800. Anyway I have a FW 800 1GHz tower. Will this dirve be ok? Thanks for your helkp in advance.
Yours in Mac OS X,
Jose Mauricio CUervo

[how to]x-fi extreme pci-e - mic working at windows 7 x64

Hi folks,
after spending like 7 hours trying and trying to get my mic to work with the PCI Express X-Fi Xtreme Audio under windows 7 x64, I finally found the way!
> Uninstall all creative software from program-list, without restarting yet, then uninstall driver from device-manager (ger?te manager). Check box "remove driver". reboot.
> Install only! http://support.creative.com/downloads/download.aspx?nDownloadId=0962? XFXA_PCDRV_LB__04_0000.exe
After rebooting, do NOT use the web update, just cancel the **bleep** and f*** all the software crap no one even needs.
After that U go here http://creative.techinhiding.com/2009/03/creative-console-updated-soundblaster-audigy-windows-7-drivers/
or download directly http://techinhiding.com/creativeblog/softwares/CreativeConsole_Mar09.exe
After doing that U can start the creative audio console from the start menu, go to button on the right (connections/anschl?sse) und switch FlexiJack to microphone! That?s it.
Good Luck and less gray hairs for you!
ps: Thank you creative for sucking even more than ATI one year ago!
pps: If someone knows, how I get SPDIF + normal 3.5mm output to work simultanously, please tell me...

mmmh I hope that this thread about solving the problem of the microphone which wouldn?t work under windows 7 might be helpful for some people...

Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          6 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Hardware UUID:          00000000-0000-1000-8000-0017F2059956

It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage.
WD Caviar Green
WD Green 2TB
For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
WD Caviar Black 1TB 6Gb
WD Black Caviar 2TB
larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance. TimeMachine sometimes makes a poor backup method with some green cases.

Driver to have HP Laserjet C4120A (HP Laserjet 4000n) work with Windows 7

We just put in 28 new Dell OptiPlex 3030 AIO with Windows 7 Professional in a school computer lab - but the tech guy did not install a printer for it to print to because he says our current printer - an HP Laserjet 4000n (C4120A) - is too old and will not work with Windows 7. This is an EXCELLENT printer and has been working for us for a long time and I hate to give it up.
Would someone please direct me to where a driver for this printer that will work with Windows 7 - or will Windows 7 automatically determine what driver is needed and retrieve it from its set of drivers it has with the operating system?
Thank you so much for helping!

Hello,
I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
Printer Properties:
From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
--> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
Printing Preferences:
again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
-->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
Let me know if this helps...
HardCopyTed
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved
Attachments:
PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Driver for HP Laserjet 1012 to work under Windows 7- 64 bit

Am trying to install a HP Laserjet 1012 to work under Windows 7- 64 bit and at HP Support, could find drivers for Vista -64-bit only.
I have tried to install this Vista - 64 bit driver and it does not seem to even print a test page.
Is there some other tweak that I need to make or
or
does it mean there will be no driver specifically usable for Win - 7 and I might as well junk the printer?
Thanks in advance.

Hi
Add Printer
Click Start then select devices and Printer the select Add Printer then select Add a local printer Use an existing port -> Next select the Printer from Manufacturer list and select the Printer from Printer list click Next and follow the Instruction.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Driver 3Com EtherLink 10/100 PCI NIC 3C905C-TX-M working on windows 7 Download

Similar Messages

Maybe you are looking for