Driver and Driver Package migration from 2007 to 2012 R2 query

Dear Team,
I am in the process of migrating the drivers and DriverPackage from SCCM2007 to CM2012 . I am following the below steps and also i am getting below warning message while doing Driver migration.
1) Copied all the driver source path from SCCM2007 to 2012 folders and shared the same.
2) By using migration Utility , i have migrated all the drivers from 2007 to 2012 .
3) After the migration i have changed the dirver source path at CM2012 side pointing to new CM12 driver source path.
4) I have started the DriverPackage migration.
5) After the DriverPackage migration , i have changed to DriverPackage Source path at CM12 side pointing to new CM12 dirverpackage source.
Please help me my steps and procedure and suggest if anything i need to do extra .....
My question and observation :
1) During the driver migration , i got a warning message like . Some drivers not able to migrate due to unsupported by CM2012 .
    a) Is there any way i can find unsupported model drivers before or after the migration
    b) Is there any other process to migrate Unsupported drivers from 2007 to 2012 other than manual import or script basis
2) After the DriverPackage migration and after the change in the DriverPackage source path. I am not seeing any folder creating in DriverPackage new source path (I understood the reason).
   a) Is there any way i can recreate those folders in new source path after the DriverPackage Migration ?
   b) What is the best process for the DriverPacakge migration from 2007 to 2012 regarding the SourcePath.
Thanks in advance....
Raja

A good article written by Johan Arwidmark
http://www.deploymentresearch.com/Research/tabid/62/EntryId/71/Migrating-unsupported-driver-packages-from-ConfigMgr-2007-to-supported-packages-in-ConfigMgr-2012.aspx
Benoit Lecours | Blog: System Center Dudes

Similar Messages

SCOM Side By Side Migration from 2007 to 2012

We current have SCOM 2007R2 (6.1.7221) installed and we plan to install SCOM 2012 R2 (latest release) in a side-by-side migration. If we deploy the SCOM 2012R2 Client to existing systems being monitored, can we multi-home the clients to both SCOM 2007R2
and SCOM 2012R2? Are there any version requirements or issues that we could face during the migration since we on (6.1.7221)?
Again, this is a side by side migration path and not an upgrade to the SCOM 2007 servers. :) I see other forum topics almost just like this, but don't see any supporting documentation.

Hi,
Here are some relevant blogs for your reference.
High Level Steps Migrating From SCOM 2007 R2 To OM12 SP1
http://thoughtsonopsmgr.blogspot.in/2013/02/high-level-steps-migrating-from-scom.html
Migrating Operations Manager 2007 R2 Network Monitoring
http://blogs.technet.com/b/momteam/archive/2011/10/24/migrating-operations-manager-2007-network-monitoring.aspx
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM - Client migration from 2007 to 2012

Hi All,
Can someone share the information what will be the impact in case , if we install CM2012 R2 client on the exisiting 2007 R2 client machine
Regards,

Hi,
In addition, information from the source hierarchy about any advertisements or deployments that have not yet run, Compliance data and inventory are not retained.
For more information, please check the article below.
Planning a Client Migration Strategy in System Center 2012 Configuration Manager
http://technet.microsoft.com/en-us/library/gg712283.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Migration from 2007 and Archive Mailbox PST import question

Our enterprise will be migrating from Exchange 2007 SP3 to Exchange 2013 CU3 very shortly. Exchange 2013 is set up and I am in coexistance mode currently. Everything is working fine with the legacy redirection, I have tested some mailbox migrations and they
work fine. We currently use Mimosa Nearpoint as a third party email archive product.
As part of this migration from 2007 to 2013, we plan on moving away from Mimosa Nearpoint and utilizing the Exchange 2013 Archive Mailbox feature. We will give each user an Archive Mailbox. We have the ability to export the users existing archive out of
NearPoint to .PST files and then migrating them directly into the users Archive Mailbox using the "New-MailboxImportRequest -IsArchive" powershell commandlet. This has been tested and works fine with one very important exception.
When I export from Nearpoint, I have to export the entire contents of the archive, I cannot set date ranges. So when I do an export, it also contains the contents of the user's mailbox. I have managed folder policies in place in the Exchange 2007 environment
which delete all contents of the mailbox older than 60 days, but when I import the .PST to the archive, it imports ALL items into the Archive Mailbox. So I have 60 days worth duplication of items.
It is my understanding that if I imported the Archive .PST directly into the users production mailbox in the 2013 side, that it would not import duplicate items. I am trying to find out if there is any process which will do the same thing with me importing
directly into the users Archive Mailbox.
Thanks you,

Hi,
We used a third patry email archive product to export to .pst files, so it is too hard to say that whether it cause this issue.
However, I found a method to delete the duplicate items from our mailbox via MFCMAPI Tool.
Please make sure that the Exchange Server mailbox has been backed up first.
Details in the following KB:
How to remove duplicate folders in Outlook when connected to an Exchange Server mailbox
http://support.microsoft.com/kb/2509983
I also found a script to remove duplicate items.
This script will scan each folder of a given mailbox and removes duplicate items from those folders. You can specify how the items should be deleted and what items to process, e.g. mail items or appointments. Sample usage is after a misbehaving synchronization
tool creates duplicate items or (accidental) import of PST file with duplicate items.
*****Please also make a full back up first*****
Removing Duplicate Items from a Mailbox
http://gallery.technet.microsoft.com/office/Removing-Duplicate-Items-f706e1cc#content
Disclaimer
The sample scripts are not supported under any Microsoft standard support program or service.
The sample scripts are provided AS IS without warranty of any kind. Microsoft further disclaims all implied warranties including, without limitation, any implied warranties of merchantability or of fitness for a particular purpose.
The entire risk arising out of the use or performance of the sample scripts and documentation remains with you.
In no event shall Microsoft, its authors, or anyone else involved in the creation, production, or delivery of the scripts be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss
of business information, or other pecuniary loss) arising out of the use of or inability to use the sample scripts or documentation, even if Microsoft has been advised of the possibility of such damages.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Error:Package migration from version 8 to version 6 failed with error 0xC001700A

I was about to post a similar question where the package runs fine on VS2013 but errors when I run DTEXEC from the command prompt.
Error:
Code: 0xC0016020
Source: Package
Description: Package migration from version 8 to version 6 failed with error 0xC001700A

Hi TheDenver,
Based on the error message that “Package migration from version 8 to version 6 failed with error 0xC001700A ", we can infer that the underlying cause is that the current SSIS package is created in SSDT BI 2014 for Visual Studio 2013, while you are trying
to execute it with SQL Server 2012 DTEXEC. It seems that SQL Server 2014 Integration Services (SSIS) is installed on a machine that has SQL Server 2012 Integration Services (SSIS) installed, multiple versions of the dtexec utility are installed.
SSIS versions are not backwards compatible. SSDT BI for VS 2013 is used for SQL Server 2014, SSDT BI for VS 2012/SSDT 2010 is used for SQL Server 2012. Please notice that once a package is upgraded from SSIS 2012 package schema to SSIS 2014 package schema,
the package cannot be downgraded. So we cannot open or execute the SSIS 2014 packages with SSIS 2012 anymore.
To fix this, please ensure that you run the correct version of the utility, at the command prompt run the utility by entering the full path (<drive>:\Program Files\Microsoft SQL Server\120\DTS\Binn).
Reference:
dtexec Utility
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Some clients migrated from 2007 is presented with the self signed certificate in 2013

I have migrated from 2007 to 2013. I did a couple of test migrations and on the ones with domain member computers Outlook is giving a certificate warning. The certificate they are presented with is the default self signed certificate on the 2013 server.
Even though I have added a trusted public certificate to Exchange and checked of to use With IIS.
I see that the default certificate is also checked of to use With IIS and it cant be removed in ECS. Shouldnt this be removed from IIS all together when adding a New certificate? And why does some Clients gets presented With the self signed and some With
the Public? For instance owa is presented With the Public cert. Also and Outlook I tested from outside the domain.
Regards

Only the UCC certificate should be bound to IIS.
Are any clients using POP or IMAP, which also use SMTP? In this case clients can be presented with the "wrong" certificate as well.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Migration from 2007.1 to 10

Hi,
Does anyone know if migration from 2007.1 to ATG 10 needs to step up to ATG 9 first? That's a logical step but in my Migration Kit, I found DB scripts that takes your schema from 2007.1 to 10.
Does anyone know where the ATG 2007.1 to ATG 9 migration document can be found? The link is broken on the old communities site.
Andrew

Here is the link to a page where you will find the portalconsistencychecker.ZIP file.
"https://codesamples.projects.dev2dev.bea.com/servlets/Scarab/remcurreport/true/template/ViewIssue.vm/id/S69/eventsubmit_dosetissueview/foo/resultpos/-1/nbrresults/0/action/ViewIssue/tab/4/readonly/false"
Regards
Sagar

CLIENT NOT UPGRADING FROM 2007 TO 2012

I HAVE ONE PRIMARY SITE, 1200+ CLINETS
SOME CLIENTS UPGRADED FROM 2007 TO 2012 NO PROBLEM. OTHERS HAVE A MESSAGE IN THEIR LOG FILES .

Hi,
Have you reviewed the ccmsetup.log and client.msi.log?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows Migration from 2003 to 2012

Hi,
When I try to complile my vb6 code, it gives me "ActiveX component cannot create object" in half way of compiling. Advice me to get over the error.

Hi,
Did you have any migration issue during migration from 2003 to 2012?
There are several causes, for example
The class isn't registered.
A DLL required by the object can't be used, either because it can't be found, or it was found but was corrupted.
For more detail information, you could refer to this article:
http://msdn.microsoft.com/en-us/library/aa231060(v=vs.60).aspx
Meanwhile, the issue is more related to VB6 code issue, so i suggest that you may ask in vb forums for more support:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Resources and public folder database - migration from 2007 to 2013

We migrated our resource mailboxes thru the move mailboxes in 2013 EAC but now we're at the point of decommissioning our 2007 servers. Before the actual decommission we stopped all 2007 services and dismounted all 2007 databases. Once we did
this the resources would no longer work - errors pertaining to cannot directly book the resource.
I had to bring up the public folder database for the moved resources to work again. We do not use public folders any longer so we did not do any type of public folder migration. Do I need to do this for the resources to work?

Hi,
Could you please tell me your Outlook version?
I saw someone got the following error when he tried to book resource after migrating from Exchange 2007 to Exchange 2010, if Outlook version is Outlook 2007. But Outlook 2010 worked well.
"Cannot directly book a resource for this meeting."
Please switch between online and cached mode to check the result. And please check if this issue occurs in OWA.
If possible, please use Outlook 2010 to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Fab40 templates migration from 2007 to SP 2013

We are working on migrating SP 2007 sites to sp 2013 and in 2007 Fab40 templates are installed and we are getting issue in SP 2013 when doing visual upgrade because of site definitons.Will these templates get upgraded to SP 2013 ?

SharePoint 2013 does not support for FAB 40 feature.
Try these links:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b3363e1d-ad1f-45cf-b1f0-1ddb40797876/40-fab-templates-migration-to-sharepoint-2013
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b920c152-8488-4d43-b609-a507c5730372/proper-upgrade-procedure-from-2007-2013-with-fab-40-templates
[custom.development]

Mac Outlook 2011 Not Syncing After User Is Migrated from 2007 to 2013

I have a couple users using Outlook for Mac 2011 (14.4.1) that have trouble automatically syncing their mailboxes after being migrated from our Exchange 2007 environment to our Exchange 2013 environment. When they kick off a manual sync, it works
fine. Automatic syncing is very hit and miss and can go for hours before syncing. Identities, accounts, and profiles have been rebuilt without success. Is there something to look for client side or perhaps server side in EWS settings? Thanks.

Hi Peter,
Does this syncing issue occur in OWA?
If it works well in OWA, it seems an issue on the Outlook for Mac 2011 side.
I suggest asking Outlook for Mac 2011 Forum for help so that we can get more professional suggestions.
For your convenience:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
Sorry for the lack of knowledge on Mac. If there is safe mode in Mac, I suggest run Mac under the safe mode to avoid some AVs and add-ins for testing.
If the syncing issue exists in OWA, I suggest collecting app logs for the further troubleshooting.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Custom DTS package migration from BPC 4.2 ,SQL 2000 to BPC 7.0 M , SQL 2005

Is there any changes required in the custom dts package when migration from BPC 4.2 , sql 2000 Environment to bpc 7.0 , SQL 2005/2008 Environment.
or
Please suggest process for migrating custom dts package from BPC 4.2 ,SQL 2000 Envirnment to BPC 7.0 ,SQL 2005/2008 Environment

When you say "custom dts package" that can mean many different things. What type of customization has been done?
There are a few BPC-related features which changed from 4.2, which must be manually adjusted, if you're using those features.
But SQL itself also changed dramatically in moving from SQL 2000 to 2005. So if your customer's packages are heavily customized around SQL 2000, this may require substantial re-work.
The only migration process for custom DTS packages -- that I'm aware of -- is to use the SQL 2005 migration tool in SSIS, see how much it messed up, and then fix everything else that's still broken.
But there also may be opportunities to improve the package overall. SQL 2005 has a lot of great new features in SSIS, over what was there in SQL 2000.
I haven't started working with SQL 2008 yet, so I can't say what complexity there is in upgrading DTS packages from 2005 to 2008. From what I read in the BPC 7 release notes, it sounds like it's a very minor upgrade, compared to the jump from 2000 to 2005.

Migrating from 2007 MBP to 2009 unibody 17" MBP

Hi all, hope you're all well!
I'm expecting delivery of my new 17" Unibody MacBook Pro this week and have heard conflicting things as to how best migrate my data from the old 2007 15" Intel MBP to the new machine and hope you kind folk can clear it up for me.
If I choose to migrate all my old data to my new Mac, will the Time Machine backup stay intact, and will the Migration Assistant handle this?
I'm concerned that my older versions of iLife and OS X will overwrite the newer versions, in effect getting rid of newer software and new system prefs like the multi-touch, is this completely unfounded and paranoid?!
I've heard on the discussions that some people have had problems with this method, and that all isn't as smooth sailing as Apple's literature will have you believe, is there anything I should look out for?
Also, if anyone has any tips, I have a Boot Camp partition running with Parallels on my old machine, what's the best way to get this intact to my new machine?
Thanks in advance for your time and answers!
Best
A.

Well the new Mac came (it is beautiful) and the Time Machine migration went off without a hitch! Don't know what the problems people have been experiencing are all about.
Now to make a new Boot Camp partition which is fine, the only sensitive data worth saving on that is my Fallout 3 save games!

Driver and Driver Package migration from 2007 to 2012 R2 query

Similar Messages

Maybe you are looking for