Driver Bluetooth windows 8.1
Hi.
Since I installed the update of Windows 8.1 on my G700, I have a warning in the lenovo solution center reporting that my bluetooth is disabled due to a wrong configuration in the registry.
Do you have any idea how i can fix it?
Please let me know,
Maruz
My issue is likely related - on the Ideapad Flex 15 (brand new) I can install a bluetooth device but when the laptop sleeps the device stops working. That is, the device still shows as installed and working but the connection is no longer possible. The only work around currently is to reinstall the driver and re-detect the device. This is with the current driver dated oct. 16.
Similar Messages
-
Bluetooth Driver In Windows 8.1 is Not Working [Model Pavilion 15 E007TU]
Sir Where is Th Bluetooth Driver for Windows 8.1 for the Laptop of Model Pavilion g6 pavilion 1318ax
In Windows 8.1 Bluetooth Not WorkingHi @iamvinod34 ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-1318ax Notebook and needing help with Bluetooth. Here is a link to fixing Bluetooth issues.
If that does not help try looking at the section in this document Labeled: Make sure that wireless communication is turned on. Sometimes just turning on and off the Bluetooth helps.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system. If an updated is needed this could cause this issue.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please helpHi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1 -
Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
When I connect the phone he load and then says no connectHi,
Please try the following driver for "MediaTek (Ralink) Bluetooth":
http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Need driver for Windows 7 for bluetooth
I have ipod touch with 4.1 and windows 7 64 bit home premium. When I try to pair the touch and the computer, the pair starts but on the windows side it says it can't find the driver for the device. Looked at windows update and through the forums and can't seem to find anything.
Any suggestions where I could find the necessary ipod driver for Windows 7?Reviving this because I couldn't find the answers anywhere else. After doing some research, I found this page describing the problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/apple-ipod-t ouch-bluetooth-not-working/fc05abc7-c54d-4fe1-a1a3-754991232e4c?page=1
However, the solution therin mentions manually selecting AVDT Drivers for your device, which don't seem to exist on Windows 7 64 bit.
Some assistance would be greatly appreciated. -
Installing driver on windows server 2012 R2 in VAIO-VPCEH38FN model
Hi,
Q1. I'm using Windows server 2012 R2. How can I install ethernet driver,Wifi Driver, Bluetooth driver etc in my VAIO laptop. can i install or not?
Q2. can i install one Windows 7 and another Windows server OS in same drive?
Please reply soon.. Thank you!
RajnikantHi Rajnikant,
>>>Question1
As Dave have mentioned above, we may need to consult with the manufacturer of the laptop.
>>>Question2
If you want to create a multi-boot system, please refer to the link below,
http://technet.microsoft.com/en-us/library/ee829686(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support -
I need driver bluetooth for win 7 64bit who can help me ?
I need driver bluetooth for win 7 64bit who can help me ?
Does this solve your problem?
http://windowsforum.com/threads/make-your-bluetooth-devices-work-on-windows-7.24 580/ -
I can not map a network drive in window 8.1 via VPN
Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server is window server 2008 r2 and located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanksHi,
Is there any error message throwed when you reconnect the mapped drive? Can you directly access the UNC path of the mapped drive? What VPN programs do you use? Please check if the VPN client connect correctly.
You could refer to the thread below to check if the AD account is restricted by VPN.
Can't access mapped drives through VPN when away from office
http://social.technet.microsoft.com/Forums/windows/en-US/a0ca41aa-08b8-4e46-a314-ffb7e401bd7a/cant-access-mapped-drives-through-vpn-when-away-from-office?forum=w7itpronetworking
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I can not map a network drive in window 8.1 under VPN
Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanksHi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support -
HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
RaulOk, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301 -
Lenovo G560 ... AUDIO DRIVER FOR WINDOWS XP ..
Iam using Lenovo G560 laptop for 8 months.. but just now , i formatted my system and installed WIndows XP and Windows 7... . but iam not able to install conexant audio driver on windows XP ...when i tried to install ...it says "problem with audio media" .. so anyone plzzz help me out of it sir....
try this driver
ps: new bios is available for your device.
http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_3839.html -
How to install USB flash drive in windows 7
Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.
Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?
Yes. Windows supports external USB drives.
-
How do I connect airport extreme to seagate hard drive using windows
How do I connect airport extreme to seagate hard drive using windows?
First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD. -
How do I open an encrypted flash drive from windows
How do I open an encrypted flash drive from windows?
How was the flash drive encrypted, that is, with what system or software?
Maybe you are looking for
-
Hello Do we have any stsnderd report which can show, against one PO how many 103 and 105 has been made and what is the balance qty for 105. Regards Niti Narayan
-
My MacBookPro with Mountain Lion seems to be making copies of files in my download folder. Why is this happening and how do I stop it?
-
ITunes 9.0.1 not burning CDs
I recently downloaded iTunes 9.0.1 and every time I open it, it displays n error saying that the registry for importing and burning CDs is missing, it imports fine, but it wont burn. I've been using 4x speed as this is the fastest setting the CD (Son
-
HomeHandle with cluster url in Weblo 8.1 SP5
Hello, I upgrade a cluster (4 serveurs) in 8.1SP4 to 8.1SP5 and now I have some probleme to access to an ejb on one server only. With SP4, i get the HomeHandle on ejb with server url informations (with home-is-clusterable set to false in the weblogic
-
Hi All, I want to load MS word data using SQL Loader into my tables. It loads fine except for certain features like bullets and numbering gets loaded as junk characters. My sql loader version is Release 8.0.6.3.0. Please help. Hope I am clear. If not