Driver Conflict!!! NVIDIA nForce3 System Driver & SB Audigy ZS Driv

There is a driver conflict if you have both these drivers installed. I have an MSI K8N Neo2 mobo that requires the NVIDIA nForce3 System Drivers to run a RAID array. Once I have both drivers installed (doesn't matter which order they were installed) there would be a conflict with "nvraidservice.exe" and an error message would appear at Windows startup. However, if I uninstall the Audigy drivers, everything is fine and dandy...except now, I won't be able to use the sound card. Please contact NVIDIA for a fix to this conflict. Is there anything I can do for now?
Thanks,
Jeff

I have spent quite a while trying to fathom this one out. Revised drivers may solve the problem but in the interim I found my own solution. This may not work for everyone, but the error messages have now gone for good. In short, I noticed that the order of loading the various processes on bootup is important, and the problem occurs when nvraidservice.exe loads too late. I found a number of shareware programmes that allow you to mess with the order of loading, but in the end the solution was even simpler. By chance, I noticed that I had been clicking on my user profile before the computer had finished loading all the processes. By letting the computer completely finish what it needed to do before going to my user profile (in windows xp), the problem disappears.
As I said, this may not work for everyone, but it has 00% solved it for me.

Similar Messages

  • NVIDIA nForce System Management Controller: Windows 7 driver?

    I have a Fujitsu Siemens PC, Amilo Desktop Pi 3630 A, running Windows Vista Home Premium 32bit,
    which I would like to update (preferably without reinstall) to Windows 7.
    When I checked Fujitsu's website and also by mail contact, I only got the response
    "Your system is not certified for Windows 7"!
    So I ran "Microsoft Windows 7 Upgrade Advisor", which said that I can upgrade!
    The only issue is that it requires an update to the driver for the
    "NVIDIA nForce System Management Controller" [current version is 5.1.2600.158],
    but Microsoft directs me to THIS site.
    Here I search for a suitable driver for my motherboard, which according the tech spec's is
    MB MS-7504PV (or MS-7504VP-PV) with chipset NVIDIA nForce 630i,
    but no luck there. The MSI Live Update Online plug-in does not find anything on my Mainboard.
    Over at NVIDIA's site I can find a driver for nForce 630i but only paired with GeForce 7xxx,
    and I don't think I need a complete motherboard driver package.
    Where can I find the correct driver?
    Or do I dare try a Windows 7 update anyway?
    What can go wrong?
    PC: Fujitsu Siemens Amilo Desktop Pi 3630 A
    CPU: Intel Core 2 Quad Q8200 2.33GHz
    M-board: Fujitsu Siemens / MSI MB MS-7504PV, muATX, v1.1, Socket 775
    Chipset: NVIDIA nForce 630i MCP73PV
    BIOS: AMI v3.0S
    Video: NVIDIA GeForce 9600 GT
    LAN: nForce Realtek  RTL8211
    OS: Windows Vista Home Premium 32bit

    You do not have an MSI Retail Product but a mainboard produced exclusively for the OEM Market.  Neither MSI nor this forum provides end-user support for OEM products.  That is also why MSI Live Update does not find anything for this particular platform (OEM).  You need to contact Fujitsu Siemens for assistance (and this include BIOS Updates and drivers).
    __TOPIC LOCKED__

  • NVIDIA nForce3 System Drivers finally updated?!

    Wow, wasnt expecting to see the day. Ive been running the same official drivers they've had since July '04! I go check Nvidia's site on a whim and see they finally updated. So has anyone installed them yet? Fix any problems? I have an issue running 2 gigs of ram above 333mhz with a Venice core that Im hoping it may solve, its sort of my last ditch effort for this problem.
    Whats the best procedure for installing new system drivers? I was going to just uninstall, reboot and click the exe. Should I take any other precautions like a Driver Cleaner tool or anything else?

    https://forum-en.msi.com/index.php?topic=89497.0
    https://forum-en.msi.com/index.php?topic=90689.0

  • Nvidia nforce3 ide driver

    hi
    use neo2 platinum  939  chipset nforce3 ultra with athlon64 3000 3 Creamware audiocards
    Bios 1.4 with win xp 2 edition DAW optimized
    i have try to install the driver for the nvidia ide controller take it from
    my cd version 5.10 and from here http://www.station-drivers.com/page/nvidia%20nforce.htm
    version 6.31 (WinXP IDE 2.7 driver version 4.64 (WHQL) with 4.74 raidtool)
    but no way  to try how  they work versus the pcide microsoft driver show in th system
    I have tried to remove the microsoft pci driver and install the nvidia  2,6 or 2.7 driver but seem
    impossible all the time  the ide controller property show me the microsoft opne's.
    Anyone here knows a trick for install the nvidia driver? i need for take the maximum bandwith
    pci for  my audiuocards /synths polyphony, reverbs delay etc..
    Thanks in advance

    hi
    the creamware pci audiocards have some dsp on board and come with a
    software with mixer audio effects synths and others tools
    all passed from pci and some plugin need a great pci bandwith
    the neo2 works well with nuendo and the scope4 software
    but i would like to check this ide nvidia driver for
    see if there is some improvements in the pci bandwith
    becuse with this driver can, maybe, pass the ide fuction threough the  nforce 3 chipset and no through the pci.
    all the time i try to inst all this specific driver ii can complet the installation but
    at the end i have a message where is report an error and after reboot i see the
    microsoft pci ide controller driver instead the nvidia 2.7 ide parallel ata driver
    maybe the drivers 5.10 or 6.31 isn't tested witr nforce3 ultra chipset
    or some tweak i have done for DAW have remove some
    basic function
    i have use this site for tweak my DAW
    http://www.musicxp.net
    thanks for answers
    cheers

  • Cannot install NVIDIA MCP55 System Driver 9.16

    NVIDIA MCP55 System Driver 9.16 will not install. Anyone know why?

    Quote from: Kujis on 03-August-06, 12:53:12
    Hello!
    I have same problem. I have tried to update it whit live-updata and for manually. When I install it, everything seems to goes okay, but after installing live-update shows that I still got v. 9.15.
    I have allmost same mainboard than you, but ultra version. ( MSI nF570 ultra )
    I have to ask, do you have had some problems while downloading? I have some problem in dual lan circuit. My computer shuts down if I download something in fast bit rate and do some browsing at the same time.
    No, I'm not having the downloading problem.

  • Screen flickering and system freezes when using Nouveau driver.

    I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
    I can't use the computer in that state so I force a shutdown.
    I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
    dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
    [ 0.000000] [mem 0x00000000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x373fffff] page 2M
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
    [ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
    [ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
    [ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
    [ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 57ff0000 00040
    [ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
    [ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 519MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x57feffff]
    [ 0.000000] On node 0 totalpages: 360319
    [ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 1040 pages used for memmap
    [ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
    [ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2883328 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
    [ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc15ba000 - 0xc1646000 ( 560 kB)
    .data : 0xc141613e - 0xc15b9d80 (1679 kB)
    .text : 0xc1000000 - 0xc141613e (4184 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1908.551 MHz processor
    [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003404] Security Framework initialized
    [ 0.003415] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003432] Mount-cache hash table entries: 512
    [ 0.006819] Initializing cgroup subsys cpuacct
    [ 0.006822] Initializing cgroup subsys memory
    [ 0.006834] Initializing cgroup subsys devices
    [ 0.006837] Initializing cgroup subsys freezer
    [ 0.006840] Initializing cgroup subsys net_cls
    [ 0.006842] Initializing cgroup subsys blkio
    [ 0.006879] CPU: Physical Processor ID: 0
    [ 0.006882] CPU: Processor Core ID: 0
    [ 0.006885] mce: CPU supports 5 MCE banks
    [ 0.006896] LVT offset 0 assigned for vector 0xf9
    [ 0.006902] process: using AMD E400 aware idle routine
    [ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
    tlb_flushall_shift: 4
    [ 0.007021] Freeing SMP alternatives: 16k freed
    [ 0.007977] ACPI: Core revision 20121018
    [ 0.015366] ftrace: allocating 18273 entries in 36 pages
    [ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
    [ 0.059999] Performance Events: AMD PMU driver.
    [ 0.059999] ... version: 0
    [ 0.059999] ... bit width: 48
    [ 0.059999] ... generic registers: 4
    [ 0.059999] ... value mask: 0000ffffffffffff
    [ 0.059999] ... max period: 00007fffffffffff
    [ 0.059999] ... fixed-purpose events: 0
    [ 0.059999] ... event mask: 000000000000000f
    [ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
    [ 0.083412] smpboot: Booting Node 0, Processors #1 OK
    [ 0.006666] Initializing CPU#1
    [ 0.176732] Brought up 2 CPUs
    [ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
    [ 0.177423] devtmpfs: initialized
    [ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
    [ 0.178162] RTC time: 21:06:38, date: 03/21/13
    [ 0.178225] NET: Registered protocol family 16
    [ 0.178397] node 0 link 0: io port [8000, ffff]
    [ 0.178401] TOM: 0000000060000000 aka 1536M
    [ 0.178404] node 0 link 0: mmio [a0000, bffff]
    [ 0.178408] node 0 link 0: mmio [60000000, efffffff]
    [ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
    [ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
    [ 0.178418] bus: [bus 00-04] on node 0 link 0
    [ 0.178421] bus: 00 [io 0x0000-0xffff]
    [ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
    [ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
    [ 0.178495] ACPI: bus type pci registered
    [ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.178581] PCI: Using MMCONFIG for extended config space
    [ 0.178583] PCI: Using configuration type 1 for base access
    [ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.178681] mtrr: corrected configuration.
    [ 0.180670] bio: create slab <bio-0> at 0
    [ 0.180670] ACPI: Added _OSI(Module Device)
    [ 0.180670] ACPI: Added _OSI(Processor Device)
    [ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.181260] ACPI: EC: Look up EC in DSDT
    [ 0.186070] ACPI: Interpreter enabled
    [ 0.186077] ACPI: (supports S0 S3 S4 S5)
    [ 0.186098] ACPI: Using IOAPIC for interrupt routing
    [ 0.193127] ACPI: No dock devices found.
    [ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
    [ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
    [ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
    [ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
    [ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
    [ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
    [ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
    [ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
    [ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
    [ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
    [ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
    [ 0.195066] PCI: root bus 00: hardware-probed resources
    [ 0.195117] PCI host bridge to bus 0000:00
    [ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
    [ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
    [ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
    [ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
    [ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
    [ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
    [ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
    [ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
    [ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
    [ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
    [ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
    [ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
    [ 0.195564] pci 0000:00:02.0: supports D1 D2
    [ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
    [ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
    [ 0.195639] pci 0000:00:02.1: supports D1 D2
    [ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
    [ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
    [ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
    [ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
    [ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
    [ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
    [ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
    [ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
    [ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
    [ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
    [ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
    [ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
    [ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
    [ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
    [ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
    [ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
    [ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
    [ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
    [ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
    [ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
    [ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
    [ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
    [ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
    [ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
    [ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
    [ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
    [ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
    [ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
    [ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
    [ 0.196412] pci 0000:01:09.0: supports D1 D2
    [ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
    [ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
    [ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
    [ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
    [ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
    [ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
    [ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196648] pci 0000:03:00.0: supports D1 D2
    [ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.203413] pci_bus 0000:00: on NUMA node 0
    [ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
    [ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
    [ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
    [ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
    [ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    [ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    [ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    [ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
    [ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    [ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
    [ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    [ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    [ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
    [ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    [ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    [ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    [ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    [ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    [ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.245086] vgaarb: loaded
    [ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
    [ 0.245086] PCI: Using ACPI for IRQ routing
    [ 0.246696] PCI: pci_cache_line_size set to 64 bytes
    [ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
    [ 0.246902] NetLabel: Initializing
    [ 0.246904] NetLabel: domain hash size = 128
    [ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.246923] NetLabel: unlabeled traffic allowed by default
    [ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
    [ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    [ 0.256702] Switching to clocksource hpet
    [ 0.264319] pnp: PnP ACPI init
    [ 0.264346] ACPI: bus type pnp registered
    [ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
    [ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
    [ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
    [ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
    [ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
    [ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
    [ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
    [ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
    [ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
    [ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265458] pnp 00:02: [dma 4]
    [ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
    [ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
    [ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
    [ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
    [ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
    [ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
    [ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
    [ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
    [ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.267589] pnp: PnP ACPI: found 14 devices
    [ 0.267590] ACPI: ACPI bus type pnp unregistered
    [ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
    [ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
    [ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
    [ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305677] pci 0000:00:04.0: setting latency timer to 64
    [ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    [ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
    [ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
    [ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
    [ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
    [ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305804] NET: Registered protocol family 2
    [ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.306184] TCP: reno registered
    [ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306279] NET: Registered protocol family 1
    [ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370606] pci 0000:00:0d.0: Boot video device
    [ 0.370621] PCI: CLS 64 bytes, default 64
    [ 0.370687] Unpacking initramfs...
    [ 0.455995] Freeing initrd memory: 2900k freed
    [ 0.459106] apm: BIOS not found.
    [ 0.459448] audit: initializing netlink socket (disabled)
    [ 0.459468] type=2000 audit(1363899998.456:1): initialized
    [ 0.474029] bounce pool size: 64 pages
    [ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.476263] VFS: Disk quotas dquot_6.5.2
    [ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.476593] msgmni has been set to 1731
    [ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.477042] io scheduler noop registered
    [ 0.477044] io scheduler deadline registered
    [ 0.477053] io scheduler cfq registered (default)
    [ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
    [ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
    [ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
    [ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [ 0.477471] vesafb: scrolling: redraw
    [ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
    [ 0.484141] Console: switching to colour frame buffer device 80x30
    [ 0.490611] fb0: VESA VGA frame buffer device
    [ 0.490704] GHES: HEST is not enabled!
    [ 0.490719] isapnp: Scanning for PnP cards...
    [ 0.802592] isapnp: No Plug & Play device found
    [ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.845087] mousedev: PS/2 mouse device common for all mice
    [ 0.845182] rtc_cmos 00:04: RTC can wake from S4
    [ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 0.845435] cpuidle: using governor ladder
    [ 0.845437] cpuidle: using governor menu
    [ 0.845439] EFI Variables Facility v0.08 2004-May-17
    [ 0.845489] drop_monitor: Initializing network drop monitor service
    [ 0.845593] TCP: cubic registered
    [ 0.845736] NET: Registered protocol family 10
    [ 0.845940] NET: Registered protocol family 17
    [ 0.845958] Key type dns_resolver registered
    [ 0.846129] Using IPI No-Shortcut mode
    [ 0.846264] PM: Hibernation image not present or could not be loaded.
    [ 0.846279] registered taskstats version 1
    [ 0.846851] Magic number: 5:851:146
    [ 0.846912] acpi device:17: hash matches
    [ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
    [ 0.847246] Freeing unused kernel memory: 560k freed
    [ 0.847645] Write protecting the kernel text: 4188k
    [ 0.847679] Write protecting the kernel read-only data: 1284k
    [ 0.858078] systemd-udevd[45]: starting version 198
    [ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.904637] ACPI: bus type usb registered
    [ 0.904681] usbcore: registered new interface driver usbfs
    [ 0.904697] usbcore: registered new interface driver hub
    [ 0.904815] usbcore: registered new device driver usb
    [ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [ 0.910252] ehci-pci: EHCI PCI platform driver
    [ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
    [ 0.912040] SCSI subsystem initialized
    [ 0.915768] ACPI: bus type scsi registered
    [ 0.918637] libata version 3.00 loaded.
    [ 0.962268] hub 1-0:1.0: USB hub found
    [ 0.962279] hub 1-0:1.0: 10 ports detected
    [ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
    [ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
    [ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
    [ 0.962559] ehci-pci 0000:00:02.1: debug port 1
    [ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
    [ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
    [ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [ 0.970261] hub 2-0:1.0: USB hub found
    [ 0.970268] hub 2-0:1.0: 10 ports detected
    [ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
    [ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
    [ 0.971618] scsi0 : pata_amd
    [ 0.972200] scsi1 : pata_amd
    [ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 0.972517] sata_nv 0000:00:08.0: version 3.5
    [ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
    [ 0.973161] scsi2 : sata_nv
    [ 0.973470] scsi3 : sata_nv
    [ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
    [ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
    [ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
    [ 0.974209] scsi4 : sata_nv
    [ 0.974369] scsi5 : sata_nv
    [ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
    [ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
    [ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
    [ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
    [ 1.143604] ata1.00: configured for UDMA/66
    [ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
    [ 1.149876] ata2: port disabled--ignoring
    [ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
    [ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
    [ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
    [ 1.936808] usbcore: registered new interface driver usbhid
    [ 1.936814] usbhid: USB HID core driver
    [ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
    [ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.120325] ata6.00: configured for UDMA/133
    [ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
    [ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
    [ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
    [ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.146217] sda: sda1 sda2 sda3
    [ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
    [ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
    [ 2.407819] Initializing USB Mass Storage driver...
    [ 2.408184] scsi6 : usb-storage 1-8:1.0
    [ 2.408335] usbcore: registered new interface driver usb-storage
    [ 2.408337] USB Mass Storage support registered.
    [ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
    [ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
    [ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
    [ 3.353005] systemd[1]: Starting Remote File Systems.
    [ 3.353024] systemd[1]: Reached target Remote File Systems.
    [ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.353274] systemd[1]: Starting Journal Socket.
    [ 3.353366] systemd[1]: Listening on Journal Socket.
    [ 3.354821] systemd[1]: Starting Apply Kernel Variables...
    [ 3.357143] systemd[1]: Mounting Huge Pages File System...
    [ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.370154] systemd[1]: Mounting Debug File System...
    [ 3.385832] systemd[1]: Starting Journal Service...
    [ 3.393610] systemd[1]: Started Journal Service.
    [ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.407389] systemd[1]: Starting Encrypted Volumes.
    [ 3.407409] systemd[1]: Reached target Encrypted Volumes.
    [ 3.407431] systemd[1]: Starting Setup Virtual Console...
    [ 3.410492] systemd[1]: Starting udev Kernel Socket.
    [ 3.410553] systemd[1]: Listening on udev Kernel Socket.
    [ 3.410641] systemd[1]: Starting udev Control Socket.
    [ 3.410689] systemd[1]: Listening on udev Control Socket.
    [ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
    [ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    [ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    [ 3.441505] systemd[1]: Started Load Kernel Modules.
    [ 3.441546] systemd[1]: Mounted FUSE Control File System.
    [ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.441693] systemd[1]: Mounting Configuration File System...
    [ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    [ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    [ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
    [ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
    [ 3.553856] systemd[1]: Mounting Temporary Directory...
    [ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
    [ 3.744908] systemd-udevd[126]: starting version 198
    [ 3.777101] systemd[1]: Started File System Check on Root Device.
    [ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.790819] systemd[1]: Started udev Kernel Device Manager.
    [ 3.800185] systemd[1]: Started Apply Kernel Variables.
    [ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [ 4.205364] systemd-journald[122]: Received SIGUSR1
    [ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
    [ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
    [ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 5.484570] ACPI: Power Button [PWRB]
    [ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 5.484697] ACPI: Power Button [PWRF]
    [ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
    [ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
    [ 5.547898] Linux agpgart interface v0.103
    [ 5.558914] ACPI: Fan [FAN] (on)
    [ 5.559089] [drm] Initialized drm 1.1.0 20060810
    [ 5.565468] microcode: AMD CPU family 0xf not supported
    [ 5.567533] microcode: AMD CPU family 0xf not supported
    [ 5.642735] wmi: Mapper loaded
    [ 5.645076] kvm: Nested Virtualization enabled
    [ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
    [ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
    [ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
    [ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
    [ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
    [ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [ 5.685594] Console: switching to colour dummy device 80x25
    [ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
    [ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
    [ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
    [ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
    [ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
    [ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
    [ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
    [ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
    [ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
    [ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
    [ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
    [ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
    [ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
    [ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
    [ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
    [ 5.761381] [TTM] Initializing pool allocator
    [ 5.761831] nouveau [ DRM] VRAM: 125 MiB
    [ 5.761838] nouveau [ DRM] GART: 512 MiB
    [ 5.761844] nouveau [ DRM] BIT BIOS found
    [ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
    [ 5.761852] nouveau [ DRM] TMDS table version 1.1
    [ 5.761855] nouveau [ DRM] DCB version 3.0
    [ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
    [ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
    [ 5.761865] nouveau [ DRM] DCB conn 00: 0000
    [ 5.761869] nouveau [ DRM] DCB conn 01: 1131
    [ 5.761872] nouveau [ DRM] DCB conn 02: 0110
    [ 5.761875] nouveau [ DRM] DCB conn 03: 0111
    [ 5.761877] nouveau [ DRM] DCB conn 04: 0113
    [ 5.762420] nouveau W[ DRM] DCB type 4 not known
    [ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
    [ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.763283] [drm] No driver support for vblank timestamp query.
    [ 5.763931] nouveau [ DRM] 1 available performance level(s)
    [ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
    [ 5.763939] nouveau [ DRM] c:
    [ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
    [ 5.811870] sky2: driver version 1.30
    [ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
    [ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
    [ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
    [ 5.814804] composite sync not supported
    [ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
    [ 5.815425] fbcon: nouveaufb (fb0) is primary device
    [ 5.829143] IT8726 SuperIO detected.
    [ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
    [ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 5.856121] ppdev: user-space parallel port driver
    [ 5.877128] Console: switching to colour frame buffer device 180x56
    [ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
    [ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
    [ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
    [ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
    [ 5.879730] hda_intel: Disabling MSI
    [ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
    [ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
    [ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
    [ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
    [ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
    [ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
    [ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
    [ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
    [ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
    [ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
    [ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
    [ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
    [ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
    [ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
    [ 8.208529] composite sync not supported
    [ 8.244451] composite sync not supported
    [ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
    [ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    [ 20.811802] composite sync not supported
    [ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
    [ 84.047784] usb 1-4: USB disconnect, device number 2
    [ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
    [ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
    [ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 389.250323] composite sync not supported
    Xorg log:
    [ 7.949]
    X.Org X Server 1.14.0
    Release Date: 2013-03-05
    [ 7.949] X Protocol Version 11, Revision 0
    [ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
    [ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
    [ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 7.949] Build Date: 09 March 2013 11:46:22AM
    [ 7.949]
    [ 7.949] Current version of pixman: 0.28.2
    [ 7.949] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
    [ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 8.001] (==) No Layout section. Using the first Screen section.
    [ 8.001] (==) No screen section available. Using defaults.
    [ 8.001] (**) |-->Screen "Default Screen Section" (0)
    [ 8.001] (**) | |-->Monitor "<default monitor>"
    [ 8.011] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 8.011] (==) Automatically adding devices
    [ 8.011] (==) Automatically enabling devices
    [ 8.011] (==) Automatically adding GPU devices
    [ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 8.060] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 8.060] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 8.069] (II) Loader magic: 0x825b620
    [ 8.069] (II) Module ABI versions:
    [ 8.069] X.Org ANSI C Emulation: 0.4
    [ 8.069] X.Org Video Driver: 14.1
    [ 8.069] X.Org XInput driver : 19.1
    [ 8.069] X.Org Server Extension : 7.0
    [ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
    [ 8.073] Initializing built-in extension Generic Event Extension
    [ 8.073] Initializing built-in extension SHAPE
    [ 8.073] Initializing built-in extension MIT-SHM
    [ 8.073] Initializing built-in extension XInputExtension
    [ 8.073] Initializing built-in extension XTEST
    [ 8.073] Initializing built-in extension BIG-REQUESTS
    [ 8.073] Initializing built-in extension SYNC
    [ 8.073] Initializing built-in extension XKEYBOARD
    [ 8.073] Initializing built-in extension XC-MISC
    [ 8.073] Initializing built-in extension SECURITY
    [ 8.073] Initializing built-in extension XINERAMA
    [ 8.073] Initializing built-in extension XFIXES
    [ 8.073] Initializing built-in extension RENDER
    [ 8.073] Initializing built-in extension RANDR
    [ 8.073] Initializing built-in extension COMPOSITE
    [ 8.073] Initializing built-in extension DAMAGE
    [ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
    [ 8.073] Initializing built-in extension DOUBLE-BUFFER
    [ 8.073] Initializing built-in extension RECORD
    [ 8.073] Initializing built-in extension DPMS
    [ 8.073] Initializing built-in extension X-Resource
    [ 8.073] Initializing built-in extension XVideo
    [ 8.073] Initializing built-in extension XVideo-MotionCompensation
    [ 8.073] Initializing built-in extension XFree86-VidModeExtension
    [ 8.073] Initializing built-in extension XFree86-DGA
    [ 8.073] Initializing built-in extension XFree86-DRI
    [ 8.073] Initializing built-in extension DRI2
    [ 8.073] (II) LoadModule: "glx"
    [ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 8.133] (II) Module glx: vendor="X.Org Foundation"
    [ 8.133] compiled for 1.14.0, module version = 1.0.0
    [ 8.133] ABI class: X.Org Server Extension, version 7.0
    [ 8.133] (==) AIGLX enabled
    [ 8.134] Loading extension GLX
    [ 8.134] (==) Matched nouveau as autoconfigured driver 0
    [ 8.134] (==) Matched nvidia as autoconfigured driver 1
    [ 8.134] (==) Matched nv as autoconfigured driver 2
    [ 8.134] (==) Matched nouveau as autoconfigured driver 3
    [ 8.134] (==) Matched nvidia as autoconfigured driver 4
    [ 8.134] (==) Matched nv as autoconfigured driver 5
    [ 8.134] (==) Matched vesa as autoconfigured driver 6
    [ 8.134] (==) Matched modesetting as autoconfigured driver 7
    [ 8.134] (==) Matched fbdev as autoconfigured driver 8
    [ 8.134] (==) Assigned the driver to the xf86ConfigLayout
    [ 8.134] (II) LoadModule: "nouveau"
    [ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
    [ 8.154] compiled for 1.14.0, module version = 1.0.6
    [ 8.154] Module class: X.Org Video Driver
    [ 8.154] ABI class: X.Org Video Driver, version 14.1
    [ 8.154] (II) LoadModule: "nvidia"
    [ 8.155] (WW) Warning, couldn't open module nvidia
    [ 8.155] (II) UnloadModule: "nvidia"
    [ 8.155] (II) Unloading nvidia
    [ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "nv"
    [ 8.155] (WW) Warning, couldn't open module nv
    [ 8.155] (II) UnloadModule: "nv"
    [ 8.155] (II) Unloading nv
    [ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "vesa"
    [ 8.156] (WW) Warning, couldn't open module vesa
    [ 8.156] (II) UnloadModule: "vesa"
    [ 8.156] (II) Unloading vesa
    [ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 8.156] (II) LoadModule: "modesetting"
    [ 8.156] (WW) Warning, couldn't open module modesetting
    [ 8.156] (II) UnloadModule: "modesetting"
    [ 8.156] (II) Unloading modesetting
    [ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 8.157] (II) LoadModule: "fbdev"
    [ 8.157] (WW) Warning, couldn't open module fbdev
    [ 8.157] (II) UnloadModule: "fbdev"
    [ 8.157] (II) Unloading fbdev
    [ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 8.157] (II) NOUVEAU driver
    [ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 8.157] RIVA TNT (NV04)
    [ 8.157] RIVA TNT2 (NV05)
    [ 8.157] GeForce 256 (NV10)
    [ 8.157] GeForce 2 (NV11, NV15)
    [ 8.157] GeForce 4MX (NV17, NV18)
    [ 8.157] GeForce 3 (NV20)
    [ 8.158] GeForce 4Ti (NV25, NV28)
    [ 8.158] GeForce FX (NV3x)
    [ 8.158] GeForce 6 (NV4x)
    [ 8.158] GeForce 7 (G7x)
    [ 8.158] GeForce 8 (G8x)
    [ 8.158] GeForce GTX 200 (NVA0)
    [ 8.158] GeForce GTX 400 (NVC0)
    [ 8.158] (++) using VT number 7
    [ 8.175] (II) [drm] nouveau interface version: 1.1.0
    [ 8.175] (II) Loading sub module "dri"
    [ 8.175] (II) LoadModule: "dri"
    [ 8.175] (II) Module "dri" already built-in
    [ 8.175] (II) NOUVEAU(0): Loaded DRI module
    [ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
    [ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 8.175] (==) NOUVEAU(0): RGB weight 888
    [ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
    [ 8.175] (==) NOUVEAU(0): Using HW cursor
    [ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 8.175] (==) NOUVEAU(0): Page flipping enabled
    [ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
    [ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
    [ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
    [ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
    [ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
    [ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
    [ 8.245] (II) NOUVEAU(0): Gamma: 2.20
    [ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 8.245] (II) NOUVEAU(0): Default color space is primary color space
    [ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
    [ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
    [ 8.245] (II) NOUVEAU(0): Supported established timings:
    [ 8.245] (II) NOUVEAU(0): 720x400@70Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@60Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@67Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@72Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@75Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@56Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@60Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@72Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@75Hz
    [ 8.245] (II) NOUVEAU(0): 832x624@75Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
    [ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
    [ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 8.245] (II) NOUVEAU(0): Supported standard timings:
    [ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
    [ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 8.245] (II) NOUVEAU(0): Supported detailed timing:
    [ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
    [ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
    [ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
    [ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
    [ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
    [ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
    [ 8.245] (II) NOUVEAU(0): EDID (in hex):
    [ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
    [ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
    [ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
    [ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
    [ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
    [ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
    [ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
    [ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
    [ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752

    I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
    So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
    In the Xorg log, the differences are:
    without 'nouveau.noaccel=1'
    [ 30.761] (II) UnloadModule: "nv"
    [ 30.761] (II) Unloading nv
    [ 30.761] (--) Depth 24 pixmap format is 32 bpp
    [ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
    [ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 30.777] (II) EXA(0): Driver registered support for the following operations:
    [ 30.777] (II) Solid
    [ 30.777] (II) Copy
    [ 30.777] (II) Composite (RENDER acceleration)
    [ 30.777] (II) UploadToScreen
    [ 30.777] (II) DownloadFromScreen
    [ 30.777] (==) NOUVEAU(0): Backing store disabled
    [ 30.777] (==) NOUVEAU(0): Silken mouse enabled
    with 'nouveau.noaccel=1'
    [ 1191.621] (II) UnloadModule: "nv"
    [ 1191.621] (II) Unloading nv
    [ 1191.621] (--) Depth 24 pixmap format is 32 bpp
    [ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
    [ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
    [ 1191.621] (==) NOUVEAU(0): Backing store disabled
    [ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
    [ 1191.621] (==) NOUVEAU(0): DPMS enabled
    So now 3D acceleration is disabled.
    I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
    I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
    Last edited by berbae (2013-03-27 10:07:42)

  • Driver Conflicts in OEM X-Fi C

    I am experiencing an apparent conflict with the drivers for my Soundblaster X-Fi Extreme Gamer card (SB X-Fi Audio [4000]), installed as OEM in my new HP xw8600 workstation. I understand the suggestion to try the manufacturer (Hewlitt Packard) first, but I have already been there with no help. I am running Win XP Pro, SP2 on an Intel Quadcore (2.83 mhz) processor. The machine was deli'vered with the HP?OEM Soundblaster drivers, and 4. sounds all worked. I subsequently installed? backup software?(EMC Retrospect 7.6) that I have used for other systems, and immediately had a?sound driver problem. On executing a system ( or file) backup, the SB X-Fi driver disappears from the?Device Driver list, and ?some of the sound outputs fail. Running the Creative Diagnostics software, the Direct and DirectSound tests passed, but the Windows Multimedia tests failed. The mixer settings-check shows that the Master, Wave, and Midi functions failed. I have tried upgrading the sound driver? with the newest version provided by HP,?version 6.00.0.283-2.4.60?from?Creative Technology, but with the same results. I have tried reinstalling?sound drivers, and the sound will then function until the backup software performs its daily backup, at which time the SB drivers are disabled. Strangely, while the SB driver disappears from the Sound Controllers folder in the Device Manager, it then appears in the System folder in the Device Manager window, but the driver is then non-functional.
    I have contacted EMC Retrospect tech support, but they?said they had never seen a driver conflict caused by their software, and suggested I contact Creative.
    Has anyone on the forum experienced a similar conflict?
    mglickstein

    Yes but long time ago with Audigy SE and only format resolved the isuse for me even uninstaling everything and living only audigy drivers the drvs were gone after restart but good thing was after I done the clean install everything was working w/o any problems with same software installed as before don't know what it was probably windows itself.

  • NVIDIA nForce 10/100 mbps Ethernet Updated driver

    I am trying to upgrade from Vista to Windows 7. I ran the upgrade advisor and it said that I need to download the updated driver for the NVIDIA nForce 10/100 mbps Ethernet 32bit driver to install after the installation. Where do I download it from and wich file do I download.

    Hi Marilyn, First things first. Before you upgrade to Windows 7, be sure that you update the BIOS to the latest level. All too often I have people update the operating system only to find out later that the BIOS is causing issues and the HP posted BIOS update will not run with the existing operating system.  You need a NVIDIA nFORCE chipset driver and I will post a link to that for you in just a moment.  However, don't upgrade your PC until you donwnload the drivers and copy them to external media.  This is one of the drivers needed. It's one of the latest nFORCE drivers.

  • Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

    Greetings to all!
    Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
    Would be glad to realize how to solve this... Thanks a lot.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.
    Message was edited by: Airtoground

    I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
    Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
    Contents and Installation order
    for Windows VISTA
    Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
    - SLP Module OEMSLP2.0
    - Sun Java 2 Runtime Environment v1.6.0
    1 KB928190(For updated USBHub.sys) KB928190
    2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
    3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
    4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
    *5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
    I found this driver but it says "no suitable driver found, installation wizard stops its work".
    Any ideas what could it mean?
    Thanks to all.

  • Nouveau driver (OSS 3D driver for Nvidia)

    I have tried to make packages for the nouveau driver with success, but would like feedback from other users before submitting them to AUR.
    To keep things clean and maintanable, i decided to create 3 packages :
    nouveau-git                     ---- the kernel modules
    libdrm-nouveau-git           ---- userspace part that replaces libdrm
    xf86-video-nouveau-git     ---- the driver itself (the easiest package)
    nouveau-git
    # Contributor : Lone_Wolf [email protected]
    pkgname=nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="Kernel modules for nouveau driver"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=(glibc)
    sources=()
    md5sums=()
    options=('NOLIBTOOL')
    install=nouveau-git.install
    _kernver=2.6.18-ARCH
    # GIT variables
    _gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
    _gitname="drm"
    build() {
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    git checkout nouveau-1
    # ./autogen.sh
    # ./configure --prefix=/usr
    # make ||return 1
    # make DESTDIR=$startdir/pkg install
    cd linux-core
    make ||return 1
    # install drm.ko and nouveau.ko kernel modules
    # drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
    install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
    install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
    nouveau-git.install
    # arg 1: the new package version
    post_install() {
    KERNEL_VERSION='2.6.18-ARCH'
    depmod -v $KERNEL_VERSION > /dev/null 2>&1
    echo ">>>"
    echo ">>> Make sure you have installed the xf86-video-nouveau-git package also"
    echo ">>> To make this work execute the following as root :"
    echo ">>> rmmod nvidia"
    echo ">>> modprobe drm
    echo ">>> modprobe -o --drm drm-nouveau"
    echo ">>> modprobe nouveau"
    echo ">>>"
    echo ">>> Now edit your /etc/X11/xorg.conf to use the nouveau driver:"
    echo ">>> Change in Section "Device" the Driver line to Driver "nouveau" "
    echo ">>>"
    echo ">>> Now start Xorg and run for cover !! "
    echo ">>>"
    /bin/true
    # arg 1: the new package version
    # arg 2: the old package version
    post_upgrade() {
    post_install $1
    rmmod drm-nouveau || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
    # arg 1: the old package version
    post_remove() {
    KERNEL_VERSION='2.6.18-ARCH'
    depmod -v $KERNEL_VERSION > /dev/null 2>&1
    op=$1
    shift
    $op $*
    libdrm-nouveau-git
    # Contributor : Lone_Wolf [email protected]
    pkgname=libdrm-nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="Userspace interface for nouveau driver"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=('glibc' 'nouveau-git')
    conflicts=('libdrm')
    provides=('libdrm')
    sources=()
    md5sums=()
    options=('NOLIBTOOL')
    # GIT variables
    _gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
    _gitname="drm"
    build() {
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    git checkout nouveau-1
    ./autogen.sh
    ./configure --prefix=/usr
    make ||return 1
    make DESTDIR=$startdir/pkg install
    xf86-video-nouveau-git
    # Contributor : Lone_Wolf [email protected]
    pkgname=xf86-video-nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="OSS 3D driver for nvidia cards"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=('libdrm-nouveau-git' 'glibc')
    source=()
    md5sums=()
    options=('NOLIBTOOL')
    _gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
    _gitname="xf86-video-nouveau"
    build() {
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    ./autogen.sh
    ./configure --prefix=/usr
    make ||return 1
    make DESTDIR=$startdir/pkg install

    Hi
    I've just get the nouveau driver installed successfully. But i had to tweak some things in your PKGBUILDS.
    here you'll found the PKGBUILD i finally got.
    nouveau-git (i hadn't git installed before compiling)
    # Contributor : Lone_Wolf [email protected]
    pkgname=nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="Kernel modules for nouveau driver"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=(glibc)
    makedepends=('git')
    sources=()
    md5sums=()
    options=('NOLIBTOOL')
    install=nouveau-git.install
    _kernver=2.6.18-ARCH
    # GIT variables
    _gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
    _gitname="drm"
    build() {
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd ${_gitname}-build
    git checkout nouveau-1
    # ./autogen.sh
    # ./configure --prefix=/usr
    # make ||return 1
    # make DESTDIR=$startdir/pkg install
    cd linux-core
    make ||return 1
    # install drm.ko and nouveau.ko kernel modules
    # drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
    install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
    install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
    libdrm-nouveau-git: nothing to change
    xf86-video-nouveau-git: faced 2 problems when trying to build this package: · Missing xf86driproto (so added to makedepends). · Compilation failure when trying to build the manpage. I edit the PKGBUILD with a dirty hack to avoid manpage compilation.
    # Contributor : Lone_Wolf [email protected]
    pkgname=xf86-video-nouveau-git
    pkgver=20061126
    pkgrel=1
    pkgdesc="OSS 3D driver for nvidia cards"
    url="http://nouveau.freedesktop.org/wiki/"
    license=('GPL')
    depends=('libdrm-nouveau-git' 'glibc')
    makedepends=('xf86driproto')
    source=()
    md5sums=()
    options=('NOLIBTOOL')
    _gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
    _gitname="xf86-video-nouveau"
    build() {
    cd $startdir/src
    msg "Connecting to git.freedesktop.org GIT server...."
    if [ -d $startdir/src/$_gitname ] ; then
    cd $_gitname && git-pull origin
    msg "The local files are updated."
    else
    git clone $_gitroot
    fi
    msg "GIT checkout done or server timeout"
    msg "Starting make..."
    cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
    cd $startdir/src/${_gitname}-build
    ##### Avoid manpage compilation #####
    mv Makefile.am Makefile.am.old
    cat Makefile.am.old | sed -e 's/SUBDIRS = src man/SUBDIRS = src/g' > Makefile.am
    mv configure.ac configure.ac.old
    cat configure.ac.old | sed -e 's/XORG_MANPAGE_SECTIONS/# XORG_MANPAGE_SECTIONS/g' | sed -e 's/man/Makefile//g' > configure.ac
    ##### End of hack #####
    ./autogen.sh
    ./configure --prefix=/usr
    make || return 1
    make DESTDIR=$startdir/pkg install
    here are my 2cents

  • Audigy 2 driv

    i just reformatted my hard dri've and i lost the disk that came with sound card that has the drivers for it and this freaking website wont give me the drivers only updates that require the drivers already. so where the heck am i supposed to get the drivers from?

    i took my sound card out to see exactly what it is, model number SB0090 (with no M or G at the end)
    when i search the site by model number there is no SB0090, theres an SB0090M and SB0090G, both are some type of Audigy 2, but every time i download an audigy 2 driver, when i try to install it, it says"Setup could not detect any Sound Blaster Audigy 2/Sound Blaster Audigy on your system.
    Please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
    Setup will now exit."
    and dont tell me that "its not in all the way" or anything like that i've taken it out and put it back in many times, i've tried it on 3 different slots on my mother board it keeps saying this and every time i turn on my computer it says windows detected new hardware so i know that it's being detected by windows so wtf is the problem? in the device manager its there under "Other Devices" as "Multimedia Audio Controller"
    when i do a search for drivers it comes up with nothing and when when i try to install any driver it doesnt work.

  • [SOLVED] Driver for Nvidia Geforce 210

    Hi guys. I'm having some trouble searching the proper video driver for my system. I need the nvidia driver for my Geforce 210.
    The wiki says: "For GeForce 2/3/4 MX/Ti series cards [NV11 and NV17-NV28], install nvidia-96xx package, available in the AUR. " , but is there any way to avoid using AUR?
    I've tried downloading the propretary driver from Nvidia' site and couldn't install it. So i'm thinking about the open drivers: is Nouveau a good choice in your opinion?
    Thanks for reading!
    Last edited by Issam2204 (2013-05-11 13:11:45)

    Issam2204 wrote:I thought 2 meant 200. So what do you think i should install? Now i'm even more confused.
    run the following command & post the output here:
    lspci | grep VGA
    if you REALLY do mean Geforce 210 you should see something like this (as I have a Geforce 210)
    ┌─(t0m5k1@b0x)-(1131/pts/3)-(03:02pm:10/05/13)-
    └─>(%:~)
    └─>> lspci | grep VGA
    02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)

  • Nvidia Quadro NVS 110M (Dell Latitude D620) driver issue

    I'm having trouble installing the right driver for Nvidia QUadro NVS 110M video card on my laptop. What ever driver I install it requests for a reboot and when I restart, I get a blue screen.
    Things that I have tried (all resulted in blue screen after restart).
    Update driver using Automatic update
    Downloaded driver from Dell support site (for Vista)
    Downloaded driver from nVidia
    Downloaded beta driver from nVidia
    Please note: It used to work on Windows 7 before on the same laptop - I was trying to replace HDD and cant seem to make it work again with the new OS installation.Chandra Sekhar

    Hello,
    I'd suggest you installing the XP driver in Compatibility mode. Remove that hardware device in Device Manager, right-click on the driver executable/installer file and select the Compatibility tab; click the checkbox before Run this program in Compatibility mode for option and select Windows XP in the list-down box;
    If the problem still persists, please understand that Windows 7 is a new operating system (only the beta version) and whole driverstore has been reprogrammed; some old driver is not compatible with new OS. I suggest that you should wait for another period of time till the retail version is released and push the vendor company to upgrade their device driver. Thanks for your time and understanding!
    For more details, please look at the first Sticky thread at the top of this forum.
    What can I do if my hardware does not work?
    This will give you some guidelines.
    Good Luck!

  • HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

    Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

    Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
    So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
    More information on these topics can be found here:
    How do I set up Time Machine to a shared drive on another Mac?
    How do I set up Time Machine to a Time Capsule or Airport Extreme?
    "Rotating" Time Machine backup disks

  • How to install Creative Cloud on any drive other than my System drive...

    You are now chatting with 'Bhagawan'
    Bhagawan: Hello. Welcome to Adobe Technical Support.
    Bhagawan: Hi Steve
    Steve: It appears CC installs on my system drive without asking me. The way I manage my system - this is not acceptable. So, how do I install on the drive I install all my other apps?
    Bhagawan: I understand that you want to install Creative Cloud desktop app. Am I correct?
    Steve: On a particular drive - not my system drive.
    Steve: CC, Photoshop, etc.
    Bhagawan: I will be glad to check and help you with this issue.
    Bhagawan: Steve, creative cloud desktop app can be install only on C drive, but other apps you select for other drive.
    Steve: My C: drive is dedicated to my OS only.
    Steve: It is a special drive that will not work for very long if software companies put their programs on it till it fills up and then everything stops.
    Steve: Didn't Adobe think of this?
    Steve: I have one computer that only has a few MBs left of C:. What do I do on that computer?
    Steve: "left on C:"
    Bhagawan: Give me a minute.
    Bhagawan: Thank you.
    Bhagawan: Steve, I'm really sorry, creative cloud desktop app will be installed on C Drive, since the operating system is installed, but other Creative Cloud apps can be installed other Drive and depends on file size.

    I had the same problem and finally solved it.
    It is "funny" that CC doesn't ask you where to install apps. Or better to say, it asks you but doesn't care. In Creative Cloud desktop app/Preferences there is option to choose where you want apps to be installed, but they are still installed in C:/Program Files/....
    How to install apps on secondary drive in just 3 steps:
    1. Go to page Adobe CC 2014 Direct Download Links – Creative Cloud 2014 Release | ProDesignTools and download all apps that you will need.
    2. Once downloaded, install it. During installation you will be asked where you want app to be installed (just like in any other "normal" installation)
    3. Be happy
    Hope I helped
    Marko

Maybe you are looking for

  • Help for a novice mac user

    O.K. I've been a very satisfied Mac user since I switched from a PC last February, so much in fact, that even though my iMac 24" 3.06 is only 9 months old, I'll be getting a new i7 quad. My question is this: I now have an iTunes account on my mac and

  • Converting to PDF crashes Word

    I'm using Acrobat Pro 9 and Word 2007. I have a document of approximately 160 pages with a Table of Contents, Figures, Tables, and lots of text. Every time I try to convert it to PDF, Word crashes. I have other similar documents that convert just fin

  • Imageready 3.0 Export DISABLED???

    What happened to my Imageready 3.0? I used to be able to open animated gifs, then export the animation frames as files, but now the "export" option is greyed-out! I KNOW this USED to work.  Did some background "update" disable this feature?  If so, I

  • Which Table Store the Query in the Query Manager?

    Hello, I have looking for the table which store all the query inside the Query Manager. From this i can retrieve the query without open the program. Please help. Thanks.

  • Home button not always working

    does anyone else have the same problem where there home button is intermitent. Some times it works first time, other time a double tap won even bring up shortcut menu. press hard, no response, press light no response, next time pick up phone its ok.