Driver Difference Document Target Quantity Issue

Hi All,
We did the DSD backend configuration and when we do a scenario document testing in the R/3 without the MDSD functionality when we run the Settlement cockpit all the documents are getting created . For the Driver difference document the target Quantity field on the line item is shows zero . But when we double click and see the detail the order quantity shows the correct quantity. Issue is target quantity is showing zero value . It supposed to show quantity value there.What might be the issue?
Thanks for your help in advance.
Thanks,
Greetson

Hi Preetham,
From the Configuration point of view everyting looks fine as we followed the Building block document. Already I had searched in OSS Notes section but no help from there that is the reason I came to the forum.
Thanks,
Greetson

Similar Messages

Difference between full and target quantity in iteme category

What is the difference between Target quantity and Full quantity in Completion rule in Item Catergory customization?

hi
full quantity is used for quotations
target quantity for contracts
Completion rules
An item may be considered fully referenced if one of the following criteria have been met
An item is complete as soon as it is used as a reference. In this case, the item is fully referenced, even if only a part of the quantity is copied.
An item is only complete once the full quantity has been copied into a subsequent document. If the item is partially referenced, it is possible to enter several sales documents for the item until the quantity is fully accounted for.
An item is only complete once the target quantity (in a contract, for example) has been copied into a subsequent document. If the item is partially referenced, it is possible to enter several sales documents for the item until the quantity is fully accounted for.
The standard version of the system defines an inquiry item as complete even if only one part of the inquiry quantity has been copied into a quotation. On the other hand, when you copy a quotation into a sales order, the quotation is not complete until the quotation quantity has been fully referenced.
Contracts, like quotations, are only considered complete once the full target quantity of the contract has been released.

Material Quantity difference document line item for HU

Dear Experts,
When I try to clear differences in LI21, i get the error message as above.
Error Message : 'Material Quantity difference document line item for HU'
Any idea why this error occurs?
Regards,
Shetty

Hello Shetty,
It may be due to some stock inconsistency. You may try iin case of a non HU managed storage location HU to run LX23 and it can fix discrepancy overwrting MM-IM with LE-WM data. But if it is a HU managed then you can run HUDIFF transaction but only to see if there is stock differences not to fix anything, usually SAP Support (Development Support) does that job.
Have a nice day !!

Report that shows STO's and quantity issued and opened quantity by document

Dear friends ,
does anyone knows if exist any report in SAP that shows me all STO's and the respective quantity issued by STO ?
We need to analyse all STO's issued since Jan 2008 till now and if possible including Batch information.
best regards,
Ale

Hi,
Try with T.code MB51.
Enter the appropriate movement type and dates, then execute.
Regards,

Copy of target quantity from Contract to Sales Order

Hi all,
The desired document flow is Quotation --> Contract --> Order.
Thru copy control the target quantity from quotation flows in to the contract, but the target quantity is not copied into the sales order from the contract.
The document type with the item category for the document types are as follows :
Quot. Doc type ZQT (Copy of AV) and item category AVN (Standard item)
Contr Doc type EWK2 (Copy of WK2) and item category WVN (Maint contr item)
Order Doc type ZSD (Service Order) and item cateogry WVN(Maint Contr item).
Please suggest a solution.
Regards,
Udaynath.

dear udaynath
check copy control settings
Copy Control is used ,
Copy control is basically used to transfer information from one document to another. In other words it helps in connecting and sharing information between two documents in a cycle like from example between quotation and a sales order. The following controls available at copy control configuration -
You can store copying requirements at every level in copying control. Copying requirements contain the specific requirements for each business process and can be stored at every level. The reference document can only be created if all these requirements have been met.
Examples of copying requirements that have been included in SAP standard system are
a. Header level copying requirement 001 checks, for instance, whether the sold to party in the source and the target document are the same
b. Item level copying requirement 301 checks, for instance, whether the item that is to be used as a copy has a reason for rejection or completed status.
c. Schedule line level copying requirements 501 ensures that only schedule lines with an open quantity greater than zero are copied.
To control the copying procedure, at each level you create:
a. Data transfer routines these routines control how fields are copied from the preceding document.
b. Copying requirements you define requirements that are checked when you create a document with reference. If these requirements are not met in any particular case, the system issues a warning or error message and if necessary terminates processing.
c. Switches there are switches for setting specific controls for each transaction. for example, you can activate or deactivate the transfer of item numbers from the preceding document at the header level for sales documents..
possible scenarios:
1- sales document - sales doc' VTAA
eg: inquiry - quotation
inquiry - order
quotation - order
quantity contract - order
2- sales doc - delivery doc - VTLA
eg: sales order - deliver ( OR- LF)
returns order - return delivery
3- sales doc - billing doc - VTFA
eg;Cash sales - cash sales billing
credit memo req - credit memo
4- delivery - billing - VTLF
eg: standard del - invoice ( LF- F2)
5-billing - sales VTAF
eg: standard invoice - credit memo req
Invoice - Invoice correction req
6- Billing - Billing VTFF
eg: Invoice - credit memo
flow will be done , only if their copying requirement condition meets
like header sold to party is same.
it has data transfer routines DataT-in which it has routines by which system transfers what data has to be copied.
Update document flow-- this has to be mark if we want the system record the previous document numbers in track.
rewards if it helps
siva

Ho do i change Target Quantity in the Refurbishment Process

Hi,
I am having an issue in refurbishment process. how do i change the target quantity that has been mistakenly entered. we would like to change the value (say from 4 to 3) or totally remove it. we have not carried out any further process for this order. Can i do it.
Else
Need to know whether i can cancel or delete the particular refurbishment order. I have seen the deletion flag (Orders --> Functions --> Deletion Flag --> Set or Reset can be tried but in my case both are greyed out. how do i delete it.
please confirm and let me know....
Regards
sathya

Pithan, Leena, Thyagarajan,
Thanks for your cooperation and KT.
The problem is resolved.
STEPS INVOLVED
Problem: Refurbishment order was created mentioning quantity as 4 and was also released. After entering the value the user came to know that he has to enter quantity as 3. When we went in change mode the field was greyed out and the stock was sitting in "On Order Stock".( Through MMBE). Goods Issue was not carried out, since we found error on hand before. I approached SDN after checking various methods.
Solution:
1. Removed the serial no assignment for the material
2. Carried out technical completion.
3. Carried out Business completion and saved the document.
Later on executing MMBE the stock moved from the "On Order Stock" to "Unrestricted Stock".
Thanks
Regards
Sathya

Target quantity in process order

Dear All,
The target quantity for the receipe or routing part is not updated in the process order. How to solve this issue.
regards
Vasantha

Hi Vivek,
Can you pl share the cause of the same.
Ulhas

Performance management for appraisal document Targets defaulting...

Hi,
   My question is about custom badi implementation in Performance management for appraisal document Targets defaulting...
Brief:
====
At the creation of the personal appraisal, the column containing the performance targets of the employee is pre filled with the targets defined in the previous appraisal cycle and contained in the previous year employee appraisal form or in the target settings document.
Solution:
      1   Please give me the soultion which badi i can use?
         and How to achieve to do this thru coding step by step?
      2. And Can you please share any other synario defaulting   developed previously.If u share these documents or coding .. It should be fine...
Help me to do fastly ..
waiting for asap response..
Thanks and Regards
Mohan.P

Hi Chris,
This component must be deployed in Portal because have a lot of services which need ESS in order to work properly. According with note 1408243 you must add those business components in your iView and only are available in that component. Once you deploy this component you do not need to assign any special role to users. The business object component is in Content Administration --> Portal Content --> Business Object --> ERP Common Parts --> Human Resources --> Employee.
Follow this link:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
And get rid of mismatch issues!!!!
Regards.
David Cortés
Edited by: David Cortes on Apr 22, 2010 11:53 PM

Message no 06067 "Scheduled quantity & &" greater than target quantity

Hi,
I change the status of the message no 06067"Scheduled quantity & & greater than target quantity & &" from W to E. Than In Se38, the schedule quantity cannot be maintained greater than target quantity.
But in MRP Run, the message number does not work.
How to restrict higher qty then target qty created through MRP.
Thanks in Advance.
Ashish Panchal

Hi Ashish,
The Note 83343 should answer your question.
83343 MD01: No check of target qty in sched. agreemnt
As described:
"The planning run should run automatically and without interruption by some events.
The system makes a decision either in favor of the quota arrangement or in favor
of the source list. The system reads the scheduling agreement once in the update process.
To have a check on the target quantity would require another read of the document which
was determined to affect the system performance."
A maximum quantity can be considered by means of the quota arrangement. A modification exists which will allow for a check of the maximum quantity in the quota arrangement. The note contains more details on this.
Regards,
Purnima.

Using two drives as source/target for copying a disk?

Greetings,
Please bear with what is probably a stupid question from a pc ship-jumper Mac newbie.
I ordered my new Mac Pro with two Pioneer optical drives in order to, as Apple says, "streamline disk burning".
I learned that Toast is the gold standard for disk burning on Macs, so I bought the Titanium version.
I assumed it would be straightforward to use the top drive as the Source for a burn and the bottom drive as the Target.
But I can't find any way to accomplish this, either with Toast or with Apple's own Disk Utility.
It always creates a disk image and then wants a blank disk to be inserted into the same drive.
Am I overlooking something really simple here? I'm not sure why there would be any need for two drives if having a source/target arrangement is not possible, or why Apple would say having two drives "streamlines" things.
Thanks in advance for any help or insight you can provide.
- Gregg

I told you it was a stupid question.
I figured out that in Toast, you have to go ahead and click the 'Record' button, then you get a chance to select the second drive as the target. It was a little confusing because both drives have the same name. The difference is the drive with the source disk in it will appear as not writeable.
Hopefully this post will help some other idiot.

Target quantity calculation in Production order.

Hi Freinds,
Target quantity of the components to be issued is calculated from the ratio from BOM of header material.
If there is component scrap for the components mentioned in BOM then the Target quantity calcultion also considers this and increases the quantity by the Scrap percentage mentioned.
Target quantity gets updated at the time of goods issue during confirmation
Problem is only for orders of one material, the target quantity calculated of components is not considering scrap inspite of maintaining the scrap for components in BOM.
Can anybody help in this matter, what could be the missing setting ?
Thanks in Advance
Shailesh

Hi Shailesh,
Please check whether the BOM where u maintained the scrap is being copied to the order. To my knowledge there is no other settings required to consider component scrap.
I think the BOM which is copied to the order might be of different alternative BOM where you have not maintained the scrap for that particular component.
Please check and revert.
Regards
Suri

MRP run: how to check the target quantity of Schedule Aggreement

Hello Gurus,
We have a requirement when running MRP, creating schedule lines automatically in Schedule Aggreement.
Currently, the MRP did NOT check the target quantity of Schedule Aggreement. But we need to check this, to make sure the schedule line quantity will not exceed the target quantity.
I check some note and the solution is use quota arrangement. but quota can be limit the maximum quantity per vendor, not per S.A.
Is there any way to fullfill this requirement?
Configuration?
Or any BAID/enhancement can be implemented?
Or where to do the modification?
Please advise, Thanks a lot!
Regards,
Charlie

Hi Charlie
This is the standard behavior: MRP does not check the target quantity.
If you want to develop your own code to do that, the only option that I see is MD_MODIFY_SOURCE. This BAdI allows you to define your own logic for the source determination during the MRP run.
Take a look on the following document for the most common BAdIs on MRP:
BAdIs for MRP
BR
Caetano

Activity cost impact on Target Cost issue

Dear All,
Earlier this issue was posted in PP forum but didnt get the answer
Kindly follow the link.
[Activity cost impact on Target Cost issue;
Regards,
Shayam

Dear Shyam,
Normally the Total costs in activity price calculation (KP26) are taken and multiplied with quantity and charged off to the receivers irrespective of the type of costs i.e. whether it is a Fixed cost or variable cost. We don't have functionality to consider the Fixed costs to spread across the output and take the per unit value accordingly. The Fixed costs in kp26 are updated just to reflect the costs in the cost component structure as Fixed costs.
Kind Regards
Umapathi G

MRP create more Schedule Lines than target quantity

We already follow the OSS note 83343, we create a Schedule agreeement and validity date is the same as the Source List and Quota arrangement, also the Target Quanity is the same in the quota arrangement in the maximun quantity and Maximun release qty fields.
After maintaining that data, we run the MRP as follow:
Processing key          NETCH               Net change for total horizon
Create purchase req.    2                   Purchase requisitions in opening period
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           1                   Adapt planning data (normal mode)
Scheduling              1                   Basic dates will be determined for plann
After that, still in teh schedule agreement was created more schedule lines that the quantoty is bigger that the target quantity in the sched Agreement.
What else we miss??

Thanks for your not help.
That I can investigate is the quota arrenagement is incorrect but for some reason the QA is not working.

Order Quantity and Target Quantity, both as editable in Sales Order

Hi All,
We have a requirement in which order quantity and target quantity, both should be allowed as editable fields in overview screen while creating a sales order or contract. Currently, only one quantity field is editable (order quantity in sales order and target quantity in contract).
First question, is this possible?
Second, If possible, then please tell the configurations need to maintain?
Note: The material is relevant for delivery (so schedule lines allowed).
Thanks & Regards,
Vishal

Hi Lakshmi,
Thanks for the reply. I think I did not clarify the actual requirements. Let me explain it again:
I understand that generally, Target qty is in contract and Order Qty is in sales order. But actually, here query is,
When I create Sales Order (VA01), then while entering Material, user should see both quantity columns (Order Qty and Target Qty) in editable mode.
So is this possible? If yes, then please guide.
Please revert back if any further clarifications is required.
Thanks & Regards,
Vishal

Driver Difference Document Target Quantity Issue

Similar Messages

Maybe you are looking for