Driver does not appear in the selection tab Windows8

NDIS protocol driver does not appear in the Selection Tab and hence I can not run any tests on it. The client operating system is Windows 8 64bit Pro Premium. I tried reinstall driver several times, reboot client and studio machines, but with no results.
Client itself is connected to the studio and is in "Ready" state.
There was no problem running the test on the same driver with Win7 64bit client OS.
HCK version is 8.59.29854
The driver is build with DDK7.1.0
Any hints on how to debug this would be helpful.
Dmitry

Have you uninstalled and re-install the HCK client on the test system?  This can cause the entry on the controller to not match up with the actual client system.  If this is the case, and you have done no testing on the system (as all results will
be lost), please try this:
1) Uninstall the DTM client from the test system.
2) Delete the client entry from HCK studio in the machine management section.
3) Reinstall the DTM client on the test system.
4) Wait for client entry appear in the "Default Pool"
5) Change client status to "Reset", wait for it to become "Ready", and try locating the target as I describe above.
Paul - This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

  • Hard drive does not appear on the Desktop

    Hard drive does not appear on desktop. Can only be found in the applications folder.

    Go to Finder -> Preferences, click the General icon, make sure the appropriate box is checked.

  • DVD drive does not appear on the "Computer" drive screen

    I have lost access to the DVD drive. It does not appear on the "Computer" drive screen.
    It will start up with a disk inserted but shuts down after a approx 20 seconds without having opened any files.
    The DVD light comes on when it first starts up and then goes off within a few seconds.
    I have re-installed the Toshiba driver and still no access.
    I believe it started when I installed a new WD 1Tb external drive which setup its virtual CD drive on the E: drive which was used by the DVD drive. I have moved the external drive to G: and left the E: drive letter vacant but still not working.
    Any ideas how I can solve this? It would be greatly appreciated.

    I don't know if this will help you but check it anyway
    http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  • HT1351 I'm OK until "click music tab, select the option "Sync Music" which does NOT appear under the music tab!?

    I recently upgraded my iPad from 4 to 6 iOS. I have a bunch of music on my PC, which I want on my iPad. My music on my PC is all in iTunes format, it recognizes my iPad, I click on the Music tab, and it gives me a list of genres--absolutely nothing about syncing. There is also no evidence of a "Summary" button anywhere. What am I doing wrong?

    Cancel all of the above. I didn't realize I had to unhide the sidebar to get to the correct music tab. Why do they hide what you need, and let you guess how to make it appear. *slinks off in embarrassment.

  • Lightroom does not appear under the application tab on my mac toolbar, where is it?

    I recently bought the adobe creative cloud and was thrilled to see that I can have access to Lightroom. The issue is that it is not under the tab on my toolbar. The bigger issue is that when I go to the adobe download center and click 'download', all that does is open up the tab to where lightroom should be. Has anyone else had this problem and found the solution. Let me know, cheers.

    I sorted it out. I was using a trail version and had signed up with a different email. I logged out of my existing trail account, then logged in using the email I signed up with during the purchase. All is well. Thank you for the quick response and feedback.

  • I lost my purchases music and it does not appear in the purchased tab in the itunes store ?

    i lost all my purchases music and went to re download them in the purchased tab in itunes store, but music did not appear only apps. Can anyone help me as i have over 100 songs purchased and would really appreciate some help ?

    dawnfromalloa wrote:
    i lost all my purchases music and went to re download them in the purchased tab in itunes store, but music did not appear only apps. Can anyone help me as i have over 100 songs purchased and would really appreciate some help ?
    This service is ONLY available in beta version in the U.S.
    "You could try going to the tab "store" then scroll down to "check for available downloads. I hope this helps!"
    This will not work.

  • Why does my seconds hard drive does not appear in the list of volumes in Settings - Performance - work volumes

    Hallo,
    the photoshop installations is really slow after updating to version 2014. So I checkt all performance related facts. I the settings of photoshop I saw, that there is only the defauld drive (systemdrive) in list of volumes. This is not the optimal case. On a different PC (Windows 7 Pro), there are all volumes present that are listet in the windows explorer. I would like to change the Setting to a different drive. Where could be the problems?
    I tried and changed:
    - Changing SATA Mode from RAID to AHCI
    - Updated all drivers (chipset, grapghic ... verything, dell's update-software offered to me)
    here an image to show the problem (placing an image seams to be broken :-(
    Thanks for help
    Martin

    Sorry, I've just deleted my previous post of a few seconds ago asking about your platform, because I realized you are on Windows because you mention "the C drive".  Senior moment.

  • My hard drive does not appear in the Finder window

    I installed a second internal hard drive inside my G5, but it never shows up in the finder window, nor anytime I try to access files from within applications (it appears on the desktop though). How can I configure my computer so that it always sees this drive and grants me access?

    The reason for resetting nvram is to force the G5 to rebuild the device tree, which it seems "loath" to do without a kick start.
    Swapping drives oddly enough seems to leave a profile in nvram for the old device.
    Personally, booting into Open Firmware is easier, thorough, and if that was all it was, works (never liked the reboot over and over zap pram which, to reset nvram, must be done from cold boot).

  • Send link doesn't work and Mailto does not appear on the applications tab

    After reinstalling Firefox twice (Tried two different versions) after my system crashed and then recovered, I got everything working again except the Send Link feature in Firefox. Reading through the forum, I tried to specify my mail program (Outlook) under Tools>Options>Applications; but found no Mailto option shown that I could select. I wonder if some service that this depends on got shut off when my system was recovered.

    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • Need a driver for a HP Colour laser Jet 1600. This does not appear on the apple list. can anyone suggest where i get a driver from?

    This driver does not appear in the apple search list.
    Any ideas on where i can locate a driver.

    Try the HP site. Apple's drivers come from the printer vendors.
    Don't be all that surprised if there isn't an updated driver available; HP don't support superceded models with updates for every OS update.

  • Instant Client on 64-bit Windows 7: Driver does not appear in System DSN

    Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
    What I did so far:
    I downloaded the basic and odbc zips for Window 64-bit.
    Unzipped the basic zip.
    Unzipped the odbc zip to the same directory.
    Added the dir path to the System Environment Variable called Path.
    Double-clicked on the odbc_install.exe to run it from Windows Explorer.
    Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
    From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
    I got the message: Oracle ODBC Driver with same name already exists.
    What am I missing?

    hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!

  • New Downloaded/Installed Cannon PPD Print Driver does not appear in driver list

    I have downloaded and installed every new driver, 5 times, including he PPD driver for the Canon imagerunner 5570 printer, however when I add the printer the PPD driver does not appear in the list of drivers. the printer is on a wireless network and I was able to print before updating.  I had not set up Time Machine until today so I can't go back, or can I.   I am a new Mac owner so please be gentle.
    Thanks

    The PPD installer will copy files to HD > Library > Printers > PPDs > Contents > Resources > en.lproj and the file names will be "cnxxxx.pdd". Can you first check that you have all the files installed.
    If you do have the files then you can add the printer using IP > LPD for the protocol. Note that the iR5570 does not support Bonjour so it won't appear in the Default view of Add Printer as Zlig suggested. You then enter the IP address of the iR5570, leave the queue name blank, change the name to something meaningful and then search for the ir5570 in the Print Using menu.
    If there are no Canon iR models listed in the Printer List (typing iR in the Search field will determine this) then you should try resetting the printing system as follows.
    1. Open System Preferences > Print & Fax
    2. Move the mouse over the Printers list.
    3. Hold down the Control key and then click the mouse
    4. Click on the 'Reset printing system' pop-up
    5. Close Print & Fax and restart your Mac
    This will remove all the printer queues from Print & Fax but will not remove the printer drivers installed on the Mac. So you can try adding your print queue to the iR5570 again using the process above.

  • Airport Extreme connected drive does not appear in Time Machines drive list

    I have two Macbook Pros. Both have 500GB hard drives. I have an airport Extreme with a WD terabyte hard drive and a HP printer attached via USB cable. Both Macbooks can access the WD HD & internet.
    One MacbookPro has time machine set up to use the Terabyte HD as backup.
    I want the other MacbookPro to also use this terabyte drive for backup.
    But when I try to set up Time Machine to use the drive, the drive does not appear in the backup drive list.
    What can I do to fix this? I had a HD crash on the non-backed up Macbook recently. I desperately need it to be backed up!
    Any ideas?

    Does the drive show in Disk Utility? Try a restart.

  • I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore  should be very smooth.
    Roger

Maybe you are looking for