Driver Downlaod for •HP Part Number:FQ557AA#ABL

Hello all,
Is there a place I can download the software for the optical mouse FQ557AA. It runs off of a cd and my new laptop doesn't have a cd drive? Can I use a different software or is there a file I can download?
This question was solved.
View Solution.

Hi:
Below is the link to the support and driver page for your optical mouse.
Select the operating system you are running, download and install the driver.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=3840695&task=
If you are running W8 or 8.1, I can't say if the W7 driver will work or not.
You'll have to take your chances.

Similar Messages

What does the "R" stand for in part number WS-C2924-XL-R

What does the "R" stand for in part number WS-C2924-XL-R?

Oh they would be boulders not stones.....
Yeah...only 18 stones here...maybe a couple more
I forget you are in Austrialia....it is Stone there.... I though it was Kilos...we do Pounds.
Mike

Looking for spare part number for Touch Smart 9300

The problem is the RJ45 connection does not show up in devices, have swapped out assemblies and others work fine in that kiosk. Have installed in other kiosks and problem follows the device assembly.
The device assembly is a little module that has USB connections and a RJ45 network connection on it. We just need the little assembly, we've tried ordering the system board but it does not come with it. Does anyone know of the HP spare parts number for this piece?
Thanks in advance!

Please see if you can identify the part using these two HP resources;
HP PartSurfer for TouchSmart 9300 Elite
HP Illustrated Parts & Service Map for TouchSmart 9300 Elite
I think the part you need is either;
I/O board with DataPort, with IR 670183-001
or
I/O board with DataPort, w/no IR 670184-001
These boards plug in near the "button" CMOS CR2032 battery.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Multiple Deliverys in to Single Billing document for same part number

Hi all,
We want to combine multiple delivery items into one invoice line item for same material code,
Scenario is like this,
Sales order getting created with BOM ( Header items and more then 50 Component items with 30 to 40 quantity for each line items )
Based on availability we will create a delivery document for header and component items -fox example
sales order - Header - material - A with 1 quantity and component is Material is B with 40 quantity, based on availability we will create delivery document, let say 20 quantity and rest 20 quantity we will create another delivery docuemnt,
while creating billing system creating with reference to two delivery docuemnt its creating two line items,
My Client requirement is if the material code is same, in billing document they need only one line item with all quantity, let say .. above example is for 40 quantity in to single line items in billing document.
This can be possible in standard SAP,
Can any one guide us or Which billing user exit would be suitable?
Regards
Nishad

Hi,
For the first part i think you can explore the "Delivery Group" option available in the item category setting.For the second requirement try to explore USEREXIT_FILL_VBRK_VBRP ( Program RV60AFZC)
hope it helps
Regards,
Shantanu

I have a HP G71 Model#G71-329WM. I need to replace the optical drive. What is the part Number?

My HP G71 Model#G71-329WM will not load a CD or DVD so I need to replace the optical drive. What is the correct Part number? Thanks
This question was solved.
View Solution.

Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c01713747.pdf
Replacement optical drives with HP part numbers can be found in Chapter 3, page 33.
You can also read the instructions in chapter 4 on removing the drive and getting the part number off of it which will be normally found on a white sticker. A 6 digit-3 digit part number (123456-001)
You can search by the part number on eBay for a used but working device or you can probably buy one new from HP by entering the part number at the link below.
http://h20141.www2.hp.com/hpparts/Default.aspx?mscssid=6287767FBDD34F3696CF3D0837BDBC96
Paul

HP Docking Station EN488AA - part number for power adapter

Hi,
I have a HP Compaq nx8220 notebook, with a HP Docking Station (EN488AA).
Unfortunately I have lost the power supply for the docking station.
I still have the power supply for the notebook itself (393955-001) but it does not plug in to the docking station. It is the correct voltage but only 90W instead of 120W, and the connector is the wrong size.
I've been looking online for the part number for the correct replacement power supply for the dock, but became very confused when I found sites advertising the same replacement part for both the nx8220 and the EN488AA when clearly they are different because the plugs don't match. None specify the plug size so I don't know which is which.
Can anyone help me identify the correct replacement part? Or better still, is there a plug adapter available so I can use my existing power supply for the dock too?
Attached are two photos - the plug from the power adapter next to the inlet of the notebook (fits) and the dock (doesn't fit).
Thanks,
EddieD97
This question was solved.
View Solution.

The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
In the picture observe the component in left hand bottom corner.
http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
I would say, take the adaptor to store and get one.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Finding replacement xServe RAID Drive Modules for sale

I've just started a new IT job and inherited an xServe (snow leopard) and xServe RAID
I'm not an expert on either. I've some experience with OS X Server, but I've never been a full on server admin.
One drive is dead. I believe they're 500GB units in the first six bays.
I also believe this is the most recent xServe RAID hardware. Purchased in 2008 or so.
So, first, where on earth would I buy a replacement?
And assuming that's possible, what are people's suggestions for buying drive modules for the other bays, and replacement parts for the xServe itself (power suppies, etc.).
Thanks!

first of all i don't have experience with proprietary Apple products, but typically i believe you can buy any hard drive so long as the interface is compatible (SATA or SAS for example) and the size is the same. there should not be a need to buy 'special Apple xserve hard drives'. if you buy a drive larger than 500 GB then the extra space beyond 500 GB will just be ignored depending on the type of RAID you have setup. definitely do not buy a disk smaller than 500 GB. pull out the disk that is bad and see what the make/model is. my xserve uses Seagate drives so you could probably just search eBay or whatever for the model number of the drive and use that. the hard drive should be able to be removed from the caddy so you don't really need a whole new "module".
as for power supplies those are proprietary and will need to be purchased thru apple or somewhere else like eBay, just search for the part number...

Portege R705-P25 LCD Back Cover Assembly part number

Hi all,
I'm looking for the part number for the LCD Back Cover Assembly. The Cover hast the following code in it
GM902984813A-D
but I'm not able to find the right part for it. I tried to look for it in "National Parts Depot" but I need another part #, something like P000.....
The Laptop is the following:
Toshiba Portege R705-P25
Part #: PT314U-00U014
Serial #: XXXXXXXXX
and the LCD screen has the following part # in it:
NRL75-EE09916A 00625D1H 4771
Maybe one of you, or someone from Toshiba-Support can help.
Thank you
[Moderator edit to remove serial number.]

I'm sending you a PM with a little more information.
- Peter

Report to find a material by a mfr part number and old material number

Hi,
Is there any standard report to find a material by a mfr part number and old material number ?
For the moment, we are using MM03 to search articles by these selection criterion.
Thanks,
Julien Girard

Hi
As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
Use Txn SQVI, enter the Quick view field say- ZMNFR and click the create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter MARA for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only. Click the tick mark , you will go to the next screen,
You will notice Quick viewer Intial screen
Open the node general material data
Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
Please ensure that you are maintaining both the details in material master basic data1 and purchasing view if you wish to get out output
Best regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:52 AM

SR520W-FE-K9 AC Adapter Replacement Part Number

Anyone help me get the part number on the AC Adapater and US AC adapter power cable part numbers for the SR520 router? I have a customer that "lost" both and needs a replacement. Any help is appreciated. I looked all over Cisco's documentation for the part number, but could only find CAB-AC2 which only appears to be the AC power cord not the adapter.
Thank you in advance for your help.

Hi Michael,
The SR520-FE uses the same power supply as the 870: PWR-850-870-WW1=
This can be used with a 2 pin CAB-AC2 mains lead
Hope that helps,
Andy

PO with Mfr part Number ..?

Hi experts,
when i enter the Material code in the Purchase order it should be ask for Mfr part Number automaticalley.
without selection of materials with Mfr part number .
I have materials with 3 Mfr part Numbers. normalley we select through search material through manualley .
but ht e problem is my client wants it should be display when he enter Material stock code.
is it possible ?
Thanksin advance,
Anthyodaya.

Hi,
Once you create the HALB for the mfr part number and then make the association to your client's stock material number, the mfr part number will automatically appear. This will happen only if there is only one to one relationship between Mfr part number for a vendor and stock material number of your client. If I had understood correctly your scenrio, you have 3 mfr part numbers for the same stock material number but for the same vendor which is rather strange. Why is this? can you explain
In case this is for a real business reason, then there is no automatic solution, the system will force the end-user to pick one. As suggested an user-exit solution can be thought using some unique identifier to pick the correct mfr part number like based on material group or something else.

Part number hp compaq

Hi everybody!!i need your help guys with a problem .i need to know for what part number is 319947-001 for hp compaq notebook??thanks in advance

Hi, Click the below link to get more information http://partsurfer.hp.com/Search.aspx?SearchText=319947-001 Then Click Here to see the list of HP Products that Part Number 319947-001 is used in.

Manufacture part number -how to config

Hi
I need to config the material master view for manufacturer part number. This subscreen should appear in the material master. can any one guide me how to create this subscreen in the material master.
Thanks in advance
BR
GP

Hi GP,
You can Put Manufacturer part number in Material description fild in MM01
Ex- Suppose u r material number is 10010 and mfg part number is B1010
Material -- 10010 (syatem generated number)
Description -- Mfg NO -B1010
Regards
Girish

How do you find the product part number on a MACbook?

they lost my UPC at the rebate place and now they're asking me for this information. please help!

for PRODUCT PART NUMBER, it's listed on the box of your macbook.
If box is lost, get the specs of the macbook and go go apple webpage and find it there, there are only few to choose from anyway
the 1st gen mac books (core duo only and not core 2 duo)
1.83GHz MacBook (MA254LL/A) <-- PRODUCT PART NUMBER
2GHz MacBook (MA255LL/A)
2GHz MacBook (MA472LL/A)
the 2nd gen macbooks (late 2006 core 2 duo)
1.83GHz MacBook (MA699LL/A)
2.0GHz MacBook (MA700LL/A)
2.0GHz MacBook (MA701LL/A)
and the 3rd gen macbooks (mid 2007)
2.0GHz MacBook(MB061LL/A)
2.16GHz MacBook(MB062LL/A)
2.16GHz MacBook(MB063LL/A)
for SERIAL NUMBER remove your macbook battery and you will find it there
Message was edited by: noread_nowrite

Iphone 6 earpiece speaker part number

I dropped my iPhone 6 in water accidentally. Now I am not aware if Apple will cover under warranty because its not manufacturer fault. So please advise for warranty if there is any in such situation.
Also I am looking for the Part-Number for earpiece speaker for iPhone 6. I want to buy original part rather than some other vendors/manufacturer.
Thank you
Akee

1. The warranty doesn't cover liquid damage. If you had the AppleCare+ program, then that would probably cover it, with a deductible of $79 USD + tax.
2. Apple may offer to replace your iPhone 6 for $299 USD + tax. If you do so, then your warranty remaining time on the current device will transfer over to your replacement iPhone 6 from Apple.
3. There are no user serviceable parts for an iPhone. Therefore, you cannot buy 'original' parts anywhere. They do not exist. Any parts being sold for iPhones that you find are either going to be (A) Stolen, (B) Counterfeit (C) Salvaged.

Driver Downlaod for •HP Part Number:FQ557AA#ABL

Similar Messages

Maybe you are looking for