Driver for 1220C with Windows 7

I have a HP Pavilion g7 with windows 7 64-bit. My printer is a Deskjet 1220C. When it prints, it only prints pink. It does not print blue, yellow oe anything else. With a brand new toner cartridge in it. What do I do?

Hi,
Based on the following link, no driver available
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=se&prodNameId=19142&pr...
You may have to use driver for Vista as mentioned in this:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00868762
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Need to download printer driver for 3510 with windows 10

I need to download printer driver for 3510 with Windows 10

Here is the link to the Deskjet 3510 drivers.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Where can I find Qualcomm Gobi 2000 driver for T410 with Windows 8

My T410 2522 MZ5 has been upgraded from Windows 7 to Windows 8 for almost a year. But in the driver download section of this web never have the driver for Qualcomm Gobi 2000 WWAN connection.
I see some members of this forum had the same problem but he said he found a beta version of the driver in this thread (http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Windows-8-Gobi-2000/m-p/1172795#M81910). So anyone please give me a link to download this driver.
Thank you very much and sorry for my Engish may not quite good.

King_Penguin wrote:
What are hoping to achieve via Bluetooth ? On iOS devices it's mainly for headphones and keyboards, not, for example, for copying content between the devices : supported profiles
I was actually hoping to use my computer as a DHCP. I am in Iraq and have a very hard time getting a solid connection. However my computer has no issues. I am usualy able to use Safari but can not get to iMessage or Facetime servers. I have Windows 7 64bit a bluetooth compatibility. Not looking for any file transfers or special stuff. Just a ICS set up.

Partitioning an External 320gb drive for use with Time Machine and...

I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
Is this possible?
I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
Has anyone done this before?
Cheers-

Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

Missing *.inf driver for 2605dtn and windows 7 64 bit

missing *.inf driver for 2605dtn and windows 7 64 bit
I just piurchased a new HP laptop with windows 7 64 bit installed. I do not have any windows 7 disks.
Where do I obtain the necessary drivers for this printer?

HI RandyJohnson,
You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information, go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Which version packages do I need for T530 with Windows 7 x64?

- Power Management Driver:
This version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032258
Or this version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014939
- Intel Management Engine Firmware:
This version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028929
Or this version http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032435
The reason I'm asking is because Lenovo Support Driver & Software website lists all these versions for T530 with Windows 7 x64.

usually i go for the newer version.
and on my thinkpad i installed power management driver version 1.66
and for ime firmware the second link you provided.
good luck

How to scan my computer and external hard drives for pictures with out importing duplicates.

how do i scan my computer and external hard drives for pictures with out importing duplicates.

iPhoto doesn't scan anywhere. It imports files offered to it. If it spots a duplicate it will warn you.

Collection query for computers with windows management framework 3.0

Hi,
collection query for computers with windows management framework 3.0, but I cant found a way. I cant see that it is in the inventory data for SMS_G_System_ADD_REMOVE_PROGRAMS_64.DisplayName.
So any way to get computers with windows management framework 3.0?
/SaiTech

select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SoftwareProduct on SMS_G_System_SoftwareProduct.ResourceId
= SMS_R_System.ResourceId where SMS_G_System_SoftwareProduct.ProductName like "Windows Management Framework 3.0%"
That won't work because as mentioned, it doesn't appear in ARP.
Torsten's suggestion will work or you can resort to software/hardware inventory using the info at
http://serverfault.com/questions/555100/methods-to-detect-version-of-windows-management-framework
Jason | http://blog.configmgrftw.com

Migrating music to an external hard drive for access by Windows

Existing discussion thread link: https://discussions.apple.com/thread/1715002?start=0&tstart=0
Hi,
I have a large (~212GB) iTunes music library that was created using iTunes on Windows. All music files, etc are held on an external drive. Now I want to be able to access my existing music library from my MacBook Pro running iTunes on OS X. When I launch iTunes I hit the key so I can select which library file it should use. I'm not currently able to select my iTunes library on the external hard disk.
I've tried following the steps covered in an existing discussion thread that I have found, Migrating music to an external hard drive for access by Windows & Mac, but that hasn't worked for me unfortunately. The linked post suggests renaming the library file (.itl) to remove its extension but the library is read-only. I've also tried doing the same when the external hard disk is connnected to my windows laptop and then switching back over to my MacBook Pro. But this has also not worked yet.
Any suggestions? Thanks.

Existing discussion thread link: https://discussions.apple.com/thread/1715002?start=0&tstart=0
Hi,
I have a large (~212GB) iTunes music library that was created using iTunes on Windows. All music files, etc are held on an external drive. Now I want to be able to access my existing music library from my MacBook Pro running iTunes on OS X. When I launch iTunes I hit the key so I can select which library file it should use. I'm not currently able to select my iTunes library on the external hard disk.
I've tried following the steps covered in an existing discussion thread that I have found, Migrating music to an external hard drive for access by Windows & Mac, but that hasn't worked for me unfortunately. The linked post suggests renaming the library file (.itl) to remove its extension but the library is read-only. I've also tried doing the same when the external hard disk is connnected to my windows laptop and then switching back over to my MacBook Pro. But this has also not worked yet.
Any suggestions? Thanks.

Is there an upgrade to Photoshop Elements 5.0 for use with Windows 8?

Is there an upgraded to Photoshop Elements 5.0 for use with Windows 8?

yes, photoshop elements 11 should be compatible with win 8 and there is an upgrade path here: http://www.adobe.com/products/photoshop-elements.html
(compatibility info: http://www.microsoft.com/en-us/windows/compatibility/en-US/CompatCenter/ProductViewerWithD efaultFilters?Architecture=X64&CurrentPage=0&TotalPages=-1&ShowCriteria=10%20Results%20Per %20Page&SortCriteria=Relevance&IsSearchWithinFilterAvailable=False&FilterByCompatibility=A LL&TextSearch=Photoshop&AbsolutePage=-1&LastRequested=13&LastSearchTerm=Photoshop )

Ipod Nano ipod needs to be reformatted for use with windows

I keep getting ipod needs to be feformatted for use with windows, how do i do this, I can't get it off.

On the PC, click here and follow the instructions.
(27135)

Already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without downloads driver again

already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without download driver again

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can lightroom for work with window 8?

can lightroom for work with window 8?

Which version of LR?
Lightroom 4, yes.
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

Creative Zen Micro Photo not tested for use with Windows so cant install it! Please help

Heya! Basically when installing the software for Microphoto it stops saying that as my device hasn't been tested for use with windows it cant install for fear of corrupting my laptop! Can anyone help me overcome this because i installed it aagges ago and it let me have the option of continuing the installating, but i had 2 uninstall it and upon reinstalling it it does not give me the option to continue. It just cancels the installation. Can someone please help me as this is driving me nuts!! Y is it that technology is continuosly mucking up grrrrr!
Lucy

Are you runnning Win XP SP2? If so, this is a standard warning about unsigned drivers, but it should still give you the option to "continue anyway" to complete the installation.
Also, make sure you have Windows Media Player 0, as this is needed for Windows XP (drivers) to recognize your MicroPhoto.

I recently purchase macbook air with OS 10.10.2. I want to use my Seagate external backup plus hard drive for time machine back up. How to partition my 1TB Seagate back up plus hard drive for use with mac and windows pc?

Hi All,
I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.

I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now. In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want. TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme.

Driver for 1220C with Windows 7

Similar Messages

Maybe you are looking for