Driver for 3Com OfficeConnect Wireless Card?

Hi there.
Anyone know of way of getting this card to work with a Ti Pbook running 10.4.6? I have a 3com OfficeConnect Wireless Card 54Mbps PC Card (3CRGPC10075) - it came free with my 3com Wireless router, but so far I can't find a driver that will get it working.
I have tried these drivers without success:
http://www.orangeware.com/endusers/wirelessformac.html
http://www.ioxperts.com/products/80211b_X.html
Any tips anyone? Should I give up and go buy one that will definitely work on Mac or persevere?
Thanks.
Ti Pbook 867 Mac OS X (10.4.6)

Hi, Pieshop. The 3Com cards that are known to work with Macs — see here — use the drivers you've already tried, so it seems like a fair bet that your card isn't going to work out. Too bad, but unless your router was grossly overpriced to cover the extra cost of the card, it probably isn't worth wasting much time trying to get it to work.

Similar Messages

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

Need mac driver for TP-Link Wireless USB adapter TL-WN7200ND

i need Mac driver for TP-Link Wireless USB adapter model no TL-WN7200ND

First of all, TP-Link does not provide OS X drivers for that adapter. However, there are other sources that have drivers like this one. It is not official and it may fail, but it has been tested by other users and it works correctly.

Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

http://www.nvidia.com/object/7seriestechspecs.html
Pls visit above nVIDIA web page.
based on NVIDIA web pages, 7900GTX supports MAC OS X.
but .....seems not so far.

Solaris 8 driver for 3COM LAN card

I have installed Solaris 8 on a Pansonic CF-71 toughbook laptop, and need a driver for a 3COM 10 Mbps LAN pcmcia card model 3CCE589EC. Are there any out there!!

What happens when you type "ifconfig -a" (while logged in as root to your solaris installation)?
Linux driver won't work.

Windows 7 driver for GeForce 320m Graphic Card and Broadcom wireless card

I just got my 11" MacAir (2011)and installed Windows 7 on it using Parallel software. Everything works fine except for the driver for the Broadcom BCM 43xx1.0 airport wireless card and for the GeForce 320m graphic card. Windows 7 cannot find the drivers. I have tried everything to find a solution: Downloaded the drivers from the Broadcom and NVIDIA websites, used the drivers that came with bootcamp and made changes to the nvao.inf file for the graphic card problems but nothing works. Does anyone know a solution to these problems? Many thanks.

Hi,
since Parallels is not an Apple product it would be better to use their own Support resources.
However, Parallels does not use the native (real) hardware of your Mac but virtualizes certain hardware.
The video adapter is a "VGA and SVGA with VESA 3.0 compatible Video Adapter" and the WiFi is mapped to a "Ethernet Virtual network card compatible with RTL8029".
For these virtual devices Parallels brings all drivers with it and names them "Parallels Tools" which you have to install manually while in our Parallels Windows virtual machine.
Refer to the Parallels User Guide http://download.parallels.com/desktop/v6/docs/en/ParallelsDesktop_UsersGuide/
Regards
Stefan

Best driver for T61p atheros wireless a/b/g card?

Hey guys I was wondering what model the card was and what the best driver was or which driver had the most tweaking options? The driver works fine on Win7 x64 but I've got other laptops that have way better range. Thanks

Hi:
Below is the link to your service manual.
Supported cards with corresponding part numbers can be found in Chapter 3. Removal and replacement procedures can be found in Chapter 4. It is a relatively easy procedure--the most difficult part is attaching the tiny antenna leads to the card connectors--and it isn't that difficult. If I can do it, you can do it.
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Since your notebook specs state you have an Intel processor/chipset, you are in luck that you can install the
Intel Centrino Advanced-N 6230 Part # 631956-001 WLAN card.
Here are the specs on that card from Intel:
http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6230.html
Now, this is very important...You MUST get the Intel Centrino Advanced-N 6230 card WITH the HP part # on it. No exceptions. So, do your search for a vendor (if you don't want to get it from HP) by the part number.
If you do not follow the above guidance and buy just any old centrino 6230, your computer will not boot until you remove the unsupported card.
Wireless cards have to be tested and validated with the antenna system in the notebook in order to comply with the wireless communication regulations established for many countries--in the USA, the FCC for example.
HP ensures compliance with these regulations by locking out any wireless cards that were not tested and validated to work with the antenna system installed in the notebook. Needless to say, HP is only going to test a few cards for each model notebook.
Here are the USA FCC guidelines regarding this matter, if you are interested.
http://fjallfoss.fcc.gov/kdb/GetAttachment.html?id=22884
If you want to buy it straight from HP, it is available for $41.52 + tax and shipping, I presume.
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=E5D285861AF644AF837A5224E8794A99&Searc...
Paul

No driver for Airport Exteme WLAN card working in Windows Vista (32bit)

Hello,
Fairly recently I had an Airport Extreme card installed into my Mac Pro. Of course everything works on the Mac side and the card appears with the following info:
Wireless Card Type: AirPort Extreme (0x14E4, 0x8E)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.38.35)
Current Wireless Network: XXX
Wireless Channel: 1
Under Windows Vista Ultimate (32bit) the card comes up with the following hardware ids:
PCI\VEN14E4&DEV_432B&SUBSYS_008E106B&REV01
PCI\VEN14E4&DEV_432B&SUBSYS008E106B
PCI\VEN14E4&DEV_432B&CC028000
PCI\VEN14E4&DEV_432B&CC0280
The Leopard DVD does not seem to contain any compatible drivers for Windows using Bootcamp for this card. I am really struggling to find a driver that works. The card is listed as 43XX in OS X, and by the Windows hardware ids it seems to be a 432B? I've tried third party drivers for this Broadcom chipset range and nothing will work and even detect a compatible card installed.
Surely there is a working Windows Vista driver for this Broadcom chipset? Does anyone have any suggestions?
Thanks!

thanks for replying..... I'm using the latest driver from the site X.0004 for the x-fi xtremegamer fatality pro. The Sound card is detected just fine. The card shows up correctly, but its just that there are no sound coming out from any of the line out. If I play an mp3 or a movie, I can see that the bar is moving under "Sound" in control panel. I've tested it using headphones etc. The card itself is fine because I tested it on windows xp, well the store where I bought it from did. So its not a hardware problem.

Driver for 3com 3c905B Fast Ethernet

Hello,
I was trying to see where I could get
a driver for Solaris 8 Sparc - 3Com 3c905B
for SunBlade
or what ethernet 100 mb network card is suppported in Solaris?
Thanks

I think it is going to be difficult at best.
Glance through the Third-Party drivers link that is on the Solaris HCL page:
http://www.sun.com/bigadmin/hcl/indexRes.html
Keep in mind that most of those links are to driver software
that is to be installed to Solaris-x86.
An example of what you may eventually get to ...
If you do successfully get such a card to work in a SPARC-based system,
it may only function AFTER the OS is fully booted, so it may not be usable as a primary interface.
The 3COM cards work very well in x86 architecture,
but it's a questionable exercise for SPARC systems.

Driver for 3csoho100b-tx LAN card

I searching desperately for a driver for my 3com 3csoho100b-tx LAN card, I have searched Google and several forums but there doesn�t seem to be one available. I know on Linux I can use the tulip driver is there anything similar on Solaris 10??

What happens when you type "ifconfig -a" (while logged in as root to your solaris installation)?
Linux driver won't work.

Error code 10 for Intel 5300 Wireless Card

Hi,
I tried to install a new Intel 5300 Wireless Card in my Thinkpad T400.
However, it is not very successful.
After I installed the driver, I find a yellow exclamation point on the 5300 Wireless Card on the device manager and an error code 10 (can't start device).
I have tried to re-install the driver but still no luck.
Could anyone help for this?
Thanks a lot
Here is some information might be useful:
Operating System: Windows XP (SP3)
Driver download from Lenovo: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70504
Wireless Card bought from ebay (The seller said this card can support IBM/LENOVO T400).

Unless the card is a Lenovo Branded card, it won't work. But since you aren't complaining about an error in BIOS about an unauthorized card, then you also might have put it in the wrong slot.
Check the Hardware Maintenance Manual for your particular system and make sure you have it in the WLAN slot, not the WWAN slot.

I use labview 8.0 and i can not run daqmx driver for pcmcia 6062e daq card

i use labview 8.0 on window xp .when i installed a PCMCIA daq card 6062E, i could not run daqmx driver.It is fine to see that the traditional version is working well.When i install daq card sometimes it is working well with traditional driver but mostly i see error on reading an analog input from PCMCIA daq device.An error called 'base adress' occures .I use last version of driver that is daqmx 8.0.1. and i have installed this correctly but again i could not see any signal on the test panel for daq-mx driver.I don't know what is the problem.Also when i install PCMCIA daq card Please reply this message.I need your helps.
Thanks

Hello,
Thanks for your reply.I will try to answer your questions.
I have checked the Device Mananger and I have seen that the device is detected by Windows XP. For another question the card shows up under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy) Devices consistently in the Measurement & Automation Explorer.I use a way that I reset the driver for traditional NI-DAQ in MAX,and then i reset the device for NI-DAQmx driver in MAX and again i tried to run the test panel of DAQmx driver but again i saw a wrong signal or noise signal on the test panel i could not see the sinusoidal signal that i connected. i do get the test panels to run with the card using the DAQmx driver, But could not run the DAQ diagnostic utility.The error was as i specified below.
03.05.2006 09:49:35
Results saved to: C:\Documents and Settings\serkan\Desktop\Diagnostic Results.txt
Selected Device: Dev1
Device Type: DAQCard-6062E
Serial Number: 107509E
Device Support: (PASS)
NI-DAQmx Version: 8.0 (PASS)
Device Reset: (FAIL)
Error -50002 occurred at an unidentified location
Possible reason(s):
The specified device is not a valid device. The operation could not be completed as specified.
------ DIAGNOSTIC UTILITY ABORTED -----
And for your last question i can say that i have used the DAQ card on other laptops.But the results were the same.İ hope to see your reply
Thanks,
Serkan Buhan
Electrical-Elecronics Engineer
Researcher
TUBITAK-BILTEN

Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

Upgraded to Windows 8.1 on Pavilion g6. Officejet 4500 Wireless all-in-one still prints but won't scan. Downloaded full feature driver. Installation quit giving error message 'file cannot be found'. Tried 'chat' sessions with no resolution
This question was solved.
View Solution.

Hello bob5e,
I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
2. If that does not work, please try this next troubleshooting document step by step.
Installation issues - The Progress Bar on the Software Installation Stops or Stalls
I hope this helps!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Help: XP driver for 3000 G410 wireless adapter

Hi All,
My recently bought g410 came with Vistra (only) drivers CD, while I'm installing winXP instead. I downloaded drivers from Lenovo website and everything worked except the winXP driver for "wireless network adapter" (all 3 of them: Gemtek, 3xxx, & 4xxx), the adapter was simply not recognized.
When I look at g410 spec, it says something like "Wireless Network Type: InviLink 802.11BG", does it mean that it is another type of wireless network driver those available on Lenovo's site? If so, where can I get this driver? Can someone help, please?
Thanks,
fitro
Solved!
Go to Solution.

Dear Silens,
Have tried to install the vista driver for Gemtek, and YES, the wireless thing is working now! Thanks for the feedback.
I notice that in the device manager, the device reads something like"Broadcom 802.11g" while from the specification, the wireless adapter should be 802.11bg (the letter "b" is missing from the description). I don't notice any performance issue though, however, would like to know if you have the same description as well?
Dear Rex,
I don't know how to start the system update software, do i need to download from any website?
Thanks,
fitro

Firmware for 3Com Bluetooth PCMCIA card

I've just recieved my new 3com pcmcia bluetooth card (3CRWB6096). According to google it was supposed to work with Linux.
I think it will, but there's something about needing the windows firmware file- BT3CPCC.bin. I have said file, and have tried putting it in both /etc/bluetooth/firmware and /lib/firmware (where the community package bluez-firmware puts similar files for other cards).
However, I'm still getting the following in dmesg on plugging the card in...
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
bt3c_interrupt: Call of irq 4 for unknown device
bt3c_open: Firmware request failed
bt3c_interrupt: Call of irq 4 for unknown device
bt3c_open: Firmware request failed
bt3c_interrupt: Call of irq 4 for unknown device
So the question is- where do I put this file? What should it be called? Is it in the kernel config or something? Where do I find out?
Any pointers would be very much appreciated
Thanks in advance
Simon

Some progress...
Oh I'm stupid. It turned out that I hadn't properly extracted the firmware, and that the file was actually empty. Once I managed to get the file out of the package, I put it in /lib/firmware/BT3CPCC.bin and it now loads it. However, hciconfig reports the device as having the address 00:00:00:00:00, and times out when trying to start or reset it.
I found someone with a Debian laptop and bluez installed at a recent LUG meeting. It worked! So now I know that it's possible. I then downloaded debian and installed in on a spare partition. After finally realising that I hadn't upgraded to a 2.6 kernel, I got my card working there as well. That's with bluez 2.15 and a patched kernel 2.6.8, which is quite a lot older than Arch's packages (I"m especially surprised at the kernel version).
So, where can I get hold of Arch packages for bluez 2.x?
Thanks
Simon

Driver for 3Com OfficeConnect Wireless Card?

Similar Messages

Maybe you are looking for