Driver for a ac power source

I am looking for a ivi driver for ac power source(or power supply). The ac source is made by California Instrument.

There's one IVI driver available for Cal. Instr. power sources on NI's Instrument Driver network.
It might be the one you're looking for.
Cal. Instr. 3000iL IVI driver
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

I need GPIB Driver for Keithley 263 Calibrator/Source Meter using Labview. Can anybody help? Thank you.

I need GPIB Driver for Keithley 263 Calibrator/Source Meter using Labview. Can anybody help?
Thank you in advance.

Hi,
on Keithley's website is explained :
"The Model 263 offers a more economical, more precise alternative to the Model 6430 or the Model 236 when used as a low-current source. It is used almost exclusively as a current calibrator."
This leads to Model 236.... A LabVIEW-driver is available @: http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Keithley%22&qt=&layout=IDNet
Maybe you have to "reconstruct" some parts - but it will help.
regards
wha

Looking for software driver for HP 6655A Power Supply with Labview 5.1

Hi, trying to control an HP 6655a Power Supply but the version of Labview in the PC is the old Labview 5.1.
I don't want to upgrade it for fear that the program will no longer function. Does anyone have the driver for the HP6655a that will work with labview 5.1?

Hi demo,
Try the drivers directly from Agilent.
Here is a couple of links:
http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536913992&NAV_ID=-536891584.536882066.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
Click on> Driver: 665xA Series Instrument Drivers
Maybe this one is better... it's older...
http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536917365&NAV_ID=-536891585.536880265.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
Click On > Driver: DC Power Supply Instrument Driver (1.13 MB)
You may have to import the instrument driver after you install the libraries. This is done by selecting from the pull down menu:
Tools > Instrumentation > Import CVI Instrument Driver
JLV

Unable to find driver for this platform: Power Mac 3.6

I had to erase and reinstall 10.4 and then ran permissions and verify disk and the disk needed to be repaired. I put the 10.4 install disk in the CD drive and restarted the computer, now I get this grey screen with white lettering telling me I need to restart your computer. I restart the computer and keep getting the same window. I can't get the 10.4 install DVD out of the computer.
What can I do to fix this?
How can I get the computer to boot up either with the install DVD or with an external hard drive so I can fix this problem?
thanks.

Hi Cathy, is this a gray machine specific Install Disc for another model of Mac?
To eject the Disc, hold the Mose button down while booting up... assuming it's not a Wireless mouse.

Driver for California Instruments 5001 iX

Hi, i'm looking for a driver for the AC Power Source 5001iX from California Instruments.
i registered on their site for a week now, but i still dont get acces for the download sector
www.calinst.com
can someone download it for me or does someone know where i can download it elsewhere?
i need it for my school project and im using labview 7
thx
Rommie19

You can try and contact them directly or you local contact: http://www.calinst.com/contacts.html
Thanks
Karsten

MacBook Air USB external drive power source

I have a LaCie 250GB USB external drive on my MacBook Air and the computer is not being able to power the drive without me connecting the hard drive to an external power source. when the drive was had about 80GB of data it would do it, now that the drive has about 180GB of data, it does not work. Can anybody recommend a solution or an external drive that can hold at least 250GB that can be powered by the MacBook Air without need for external power source?

I have the same time of problem. Although, it's mentioned a using a self powered hub. However, I find this did not work. Apple states that the single usb port on the MBA is high powered to give the ext. super drive they sell the power it needs to connect to the MBA. What I have noticed is no matter which USB self powered hub I use I get the same results. The MBA reports that one or more devices is drawing too much power. Although, the powered hub is supposed to provide power to those devices that require power over USB. I should also mention, all I am connecting are two USB devices. 1 ext. Verbatim 500 Gig Drive. and my iPhone. Since the MBA has only 120 gig drive I had to move all of my movies etc. to the Ext. 500 now if I want to sync my phone or move a movie to the phone I get the errors.

WD Legacy External Hard Drive "Draws too much power from USB"

I have a nice MacBook Pro running Leopard, a year or so old and I've never had any issues with it. I used a WD Legacy 250GB External Hard Drive for Time Machine to back up all my stuff. It has its own power source, and the USB cable works fine because I use it with my printer all the time. However, even with both the laptop and the hard drive plugged in, my laptop automatically disconnects the hard drive because the "USB is drawing too much power".
It didn't happen when I initially backed stuff up on it, and it plugs in and works fine with a desktop. Is there any way to disable the automatic disconnect for drawing too much power through a USB? I don't understand how that's even possible because the external hard drive has its own power source, and I just want my stuff backed up. I could care less if it ***** the charge out of my laptop for a few minutes if that means it will work. I've considered getting a powered USB HUD, but wanted to get everyone else's opinion first. Thanks!

Contact the manufacturer. I think the power pack for the drive is not functioning properly.

I have new hard drive in macbook pro(08) and have SATA cable with external power source to old hard drive (10.5.8)via. USB port and newer drive(10.6.8) will not recognize older drive..Do I need to partition newer drive with older disk to recover data?

I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8 connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08

You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
http://scsc-online.com
They also sell a product named Phoenix that can do OS extraction and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
I would suggest the following:
Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
Disk Warrior can be found at:
http://www.alsoft.com/diskwarrior/
The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the damage has already been done.
Let us know what happens.

Driver for agilent AC source 6811b/6812b

Hello,
we are using Labview 8.0.1 and want to use a 6811b AC source via GPIB.
Does anybody have a driver for this source ?
Maybe a driver via RS232 would also help, but GPIB is definitly preferred.
Remark:
drivers for 6812B model might also work due to the difference is only the output power capability
Thanks a lot in advance !
Robert

duplicate post

NVIDIA driver doesn't dynamically change power source

I'm using the NVIDIA driver on an MSI laptop, and I've noticed that it doesn't dynamically detect my power source. The result of this is that if I boot the computer on battery power, then plug it in, the video card will continue to perform at less-than-maximum performance until I reload the driver with modprobe (of course, this is annoying because I have to exit from X11 first, then restart X11 after). This goes the other way, as well; that is, I can boot the machine on AC power, then unplug it and the video card will continue to run as if it were still on AC power. I have the "PowerMizer" configured to "Adaptive" in the settings.
Has anyone else experienced this issue? Any ideas on how to solve it?
Thanks.
Arch x86_64
NVIDIA 195.36.15
MSI MS-1651 laptop
NVIDIA GeForce 9600M GT

Took me a bit to work out why my nvidia card wouldn't behave the way I wanted it to on battery / AC.
I've just achieved the behaviour you're describing working on my Dell laptop (I wanted adaptive on battery, full performance on AC in X).
What works for me is:
Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3322; PowerMizerDefaultAC=0x1"
... in xorg.conf and making sure you have installed acpid and starting it at boot.
It seems the nvidia driver uses acpid to detect if the cable has been pulled or not -- if you don't have acpid running it will always stay at max performance with my xorg.conf device settings listed above.
All I did was install acpid, started it at boot in rc.conf, no acpid configuration at all (i.e. I didn't touch a file except for rc.conf after I installed it), then I found the nvidia driver was able to detect the AC state.
If you want to tweak the settings for an on boot scenario (e.g. runlevel 3, no X), I'm pretty sure you can pass module parameters to get what you want -- however I haven't bothered with that as I'm always in X anyway.
Hope this helps, cheers.
References:
http://tutanhamon.com.ua/technovodstvo/ … IX-driver/
http://wiki.archlinux.org/index.php/Acpid
Last edited by pezz (2010-06-02 16:35:28)

How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
   Paul

i get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First           : 0x4001c001
DLL Last            : 0x41c7c0d8
Physical First      : 0x84001000
Physical Last       : 0x863bbdec
Num Modules         :        294
RAM Start           : 0x863c0000
RAM Free            : 0x863d5000
RAM End             : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files           :        116
Kernel Flags        : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start   : 0x00000000
Driver Glob Length : 0x00000000
CPU                 :     0x01c2
MiscFlags           :     0x0002
Extensions          : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18    0x9     0x25    0x0     0x0     0x0
Row 1: 0x26    0xd     0x28    0x0     0x0     0x0
Row 2: 0x27    0x24    0x23    0x0     0x0     0x0
Row 3: 0x0     0x0     0x0     0x0     0x0     0x0
Row 4: 0x0     0x0     0x0     0x0     0x0
Row 5: 0x0     0x0     0x0     0x0     0x0     0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
        Height = 0x280
        Width = 0x1e0
        HSW = 0x20
        HFP = 0x8
        HBP = 0x17
        VSW = 0x1
        VFP = 0x4
        VBP = 0x3
        DVI is not enabled
        PixelClkDiv = 0x7
        LogClkDiv = 0x1
        ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed.

Where can I get an additional power source for my MacBook Pro?

I am travelling to Europe next week and will be travelling on the road quite often. I would like to get some work done during that time. My laptop battery will inevitably run out of power during that time and I would like to carry an additional power source with me so I can get some extra juice when I am nowhere near an outlet.
I have the latest MacBook Pro where the battery is not removable.
Where can I get an additional power source for my MacBook Pro? I don't mind if it is a 3rd party product.

you could get something like this: http://www.amazon.com/Energizer-XP18000-Universal-External-Netbooks/dp/B002K8M9H C
it's about the same cost as an extra battery used to be. there's a range of similiar products at Amazon, i'd check reviews.

Is there a MagSafe 2 compatible portable external power source for the retina display MacBook Pro?

I’m using a retina display MacBook Pro with the MagSafe 2 connection. I would like to have a portable external power source to extend the use of my laptop on long field trips where I am away from power sources. Swapping batteries is not an option for this generation of MacBook Pros. There seem to be many options for PC’s and even iPhones/iPads/iPods but the MagSafe 2 connection seems to be the issue. I saw one link that suggested buying an Apple MagSafe 2 power adapter and performing surgery on the power cord (using components provided by the vendor) so that the adapter would run on their back up battery. I was hoping for a more esthetically pleasing solution. Any suggestions? Does this product exist and I just missed it? Clearly, if a MagSafe(1) compatible external battery existed I could adapt that using the MagSafe to MagSafe 2 converter.

Sparon,
I wouldn’t recommend using an underpowered AC adapter with your MacBook Pro. It sounds as though the best solution would be to get a different laptop bag with a sufficiently large side pocket.

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Driver for a ac power source

Similar Messages

Maybe you are looking for