Driver for agilent AC source 6811b/6812b

Hello,
we are using Labview 8.0.1 and want to use a 6811b AC source via GPIB.
Does anybody have a driver for this source ?
Maybe a driver via RS232 would also help, but GPIB is definitly preferred.
Remark:
drivers for 6812B model might also work due to the difference is only the output power capability
Thanks a lot in advance !
Robert

duplicate post

Similar Messages

  • LabVIEW drivers for Agilent Noise Source 346B and Signal Generator E8257C-520

    Could anyone please tell me where to find LabVIEW drivers for Agilent Noise Source 346B and Agilent Signal Generator E8257C-520. I did not find them on NI's web site. Thank you!

    To my knowledge, the Agilent 346B Noise Source is not a programmatically controllable instrument and therefore we can't create an instrument driver. I suppose it is possible to be controlled through an instrument (like the PSG) but I don't see any documentation on this.
    As for the E8257C, we are insterested in providing a LabVIEW driver for this instrument series. Let me know if you are interested in assisting our development effort by loaning us the instrument.
    Jason Hobbs
    Instrument Drivers

  • Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

    I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
    Does anyone have one?
    Thanks,
    Avner

    Hello,
    It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
    Thank you,
    JLS
    Best,
    JLS
    Sixclear

  • Looking for Labview driver for Agilent 4294A (HP)

    Help!
    I've been browsing the driver database looking for the Labview GPIB driver
    for Agilent(formerly HP) 4294A Gain-Phase Analyzer.
    Does anyone know where I can get it?

    Hello all,
    NI is interested in developing LabVIEW and CVI drivers for the Agilent 4294A. I have been trying to obtain one of these units on loan from Agilent for the past couple of years with no success. If anyone can spare their 4294A for the duration of driver development or can influence Agilent to loan a 4294A, NI will write certified CVI and LabVIEW drivers for it.
    Jason Hobbs
    Instrument Drivers

  • Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

    I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

    Hi,
    There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
    Multi-Environment Certified IVI Instrument Driver
    Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
    The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
    Try LabVIEW 7.1 FREE Online
    If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
    -John M

  • Instrument driver for agilent 8960 to run CDMA tests

    Hi, just wonder if there is an instrument driver for agilent 8960 to run CDMA tests? I know 8960 has E1963 and E1968 driver, but 1963 is designed for W-CDMA and 1968 is for GSM/GPRS/EGPRS. So is there a driver designed for CDMA mode? Thanks a lot!
    Solved!
    Go to Solution.

    Unfortunately, it does not appear that there currently is one.  When I search the Instrument Driver Network I only find the two drivers that you pointed out.
    Brandon Treece
    Applications Engineer
    National Instruments

  • Found driver for Agilent E3633A but it is for V6.0 LabWindows. Is it ok for V8.5.1?

    I have a Agilent E3633A power supply that I am trying to communicate with on GPIB. I have a Agilent 82357B USB/GPIB that connects my PC to the power supply. I am having trouble talking to the power supply. I saw some posts on the subject and saw there is a driver for the E3633A. I downloaded it. The download page said this was for LabWindows V6.0. Will it be ok to install it for LabWindows V8.5?
    I am also looking for some code examples that use the Agilent 82357B USB/GPIB to communicate with instruments. Have not used GPIB on LabWindows before so I am struggling a bit. Any suggestions are appreciated.
    thanks in advance,
    Don Pearce

    The power supply driver is probably fine, especially if you have the source code with it.
    If it is a VISA driver, you will need the version of VISA that is compatible with your interface. In this case, with your Agilent interface. I personally have no experience with that equipment as I have always used NI GPIB interfaces and NI-VISA to keep things simple.
    You may need to contact Agilent technical support for the interface issues.
    Martin Fredrickson
    Test Engineer
    Northrop Grumman
    Advanced Systems and Products
    San Diego, CA 92128

  • Instrument driver for Agilent E5061A network analyzer

    Is there a instrument driver for the Agilent E5061A network analyzer ? I couldn't find one neither on NIs Instrument Driver Network nor on Agilents site.
    We are using Labwindows/CVI as development system.

    Yes we are talking about the same driver, but i dont know why hp871x.c file was removed. However, hp871x.h and hp871x.fp are included.
    Anyhow, look this comment into hp871x.cpp file:
    In addition, if WIN32 is defined, _CVI_ may also be defined to indicate that the program is being compiled under LabWindows CVI.....
    I guess it is not so hard to modify this source code (from hp871x.cpp to hp871x.c). Sorry for disturb you!!!
    "Only a life lived in the service to others is worth living..." - Albert Einstein

  • Labview driver for agilent 8164A tunable laser

    I'm working on a project that involves setting up our Agilent 8164A lightwave measurement system in labview. I cannot locate the driver software on the NI website. Please let me know where I can download the driver for this equipment. Thanks.

    Actually we don't have a driver for that instrument in our website, so that means that we also don't have it in the CD. So you may want to check the Agilent's website, or as a matter of surprise, I found in our database one document that was talking about some past issue and it involved the 8166 instrument, so the author attached the driver for this instrument so we can reproduce what he found out, so I'm attaching this file here which is the file the previous Sr. mention, "hp816x", I installed it in my computer and run it and it is an Agilent made driver, so you can use this one or try to contact the Agilent people. Also you may request a LabVIEW driver been made for this instrument, please see the details at: O
    ther Driver's Resources from our download site.
    Good luck!
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments
    Attachments:
    816x.exe ‏2875 KB

  • Anyone has an instrument driver for Agilent E8364 50GHz PNA

    Does anyone have a working instrument driver for the E8364 50GHz PNA? I am currently tryin to use the agpna instrument driver downloaded from NI but i am having errors. The PNA balks that the "query is unterminated" and then the VI times out. Please let me know if you have a working instrument driver.

    Is this the driver you are downloading?
    If so,
    - Are you running the Getting Started VI to test communication?
    - Did the ID query pass?
    - Make sure you have VISA 2.6 or later installed.
    - Try running NI-spy with with the Log to File option enabled and post the spy capture.
    NI Spy Tutorial

  • Anybody has a LabVIEW 6 driver for Agilent 8510C?

    Hello. I have LabVIEW version 6 and I am trying to talk to an Agilent 8510C network analyser. I seem to be able to communicate with the instrument only for sweep, number of points, etc, but I cannot transfer any data from the 8510 to the PC (to export data to Excel). I tried saving data to memory, and using the "outpdata, outpfrmt, outpraw" commands to transfer numbers to PC with no luck.
    The NI site has only labVIEW 7 and 8 driver versions, so I am stuck. Has anybody developed anything for L.6? Any help much appreciated

    Give this a try. In the future, if you need other drivers, it would help if you would attach the driver from NI's site. It's pretty simple to do a save for previous version assuming someone still has older versions of LabVIEW still installed. A lot of us do so it just makes it easier to do the down conversion if you attach the file you need converted.
    Attachments:
    hp8510_6.zip ‏1163 KB

  • What Driver for Agilent 2000-X Series Win NT / Labview 6

    Need to Integrate a 2000-X series into an old AT system.
    Win NT
    Labview 6.0
    Could use help getting started - not sure if this setup will work or what drivers will be compatible with this system?

    I believe all the neccesary drivers are there after lookiong into it further.
    NI-488.2 and NI-Visa 2.6 are installed.
    NI MAX version is 3.02.3005
    Connection is GPIB.
    Seems that I could use the DLL flexible prototype adapter in Test stand to utilize the functions in the GPIB32.dll of the NI-488.2 driver.
    Looking for a little direction or clarity on what approach to take using this instrument with this setup.
    Just learning the ropes and not too familiar setting up to send/rcv SCPI commands to control instruments.
    Thanks for any/all replies

  • Driver for a ac power source

    I am looking for a ivi driver for ac power source(or power supply). The ac source is made by California Instrument.

    There's one IVI driver available for Cal. Instr. power sources on NI's Instrument Driver network.
    It might be the one you're looking for.
    Cal. Instr. 3000iL IVI driver
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • Driver for N9010A for Labview 2011

    I am looking for a driver for Agilent N9010A Spectrum Analyzer for Labview 2011, I see the drivers for 8.6 and 2010 but we need it for 2011.
    Thanks

    2011 can load anything from version 6.0 and up so you don't need a specific 2011 version.

  • Drivers for Agilent 6811B

     Hello
     I need a drivers for Agilent 6811B AC source/ Power Analyzer, but I using a LabVIEW 7.1 and I only find a drivers for LV 8 or higher at http://sine.ni.com/apps/utf8/niid_web_display.down​load_page?p_id_guid=493228DD99AA697EE0440003BA7CCD​...
     Does this drivers exists and anybody knows how to find it?
     Thanks!

     Hi Tomasz
    I can see that you have asked this question also on www.labview.pl (polish forum) - http://www.labview.pl/ForumsPro/viewtopic/t=2328.h​tml
    The answer you got there is correct, but if someone needs this information for the future, I'll translate it into english:
    If they're not on the website, you can do 2 things:
    - open the 8.0 and save them for previous version. With some luck they'll be working fine. If not, then you can use those drivers as a sample how to write your own drivers, since they are using generic VISA drivers
    - download CVI drivers, create a dll and call it in LV 
    Let me know if it works
    Best regards
    Best regards,
    Maciej Antonik
    National Instruments Poland

Maybe you are looking for

  • B&W - Unsupported Image Format

    Aperture continues to misbehave. I scan B&W photos in using VueScan software and a Canon flatbed scanner, import them into Aperture 3.1.1, clean up the photos and sometimes even am allowed to upload to SmugMug and THEN I get the Unsupported Image For

  • Sqlplus is not recognized

    hi, When I connect to database from client it says sqlplus is not recognized as internal or external command. The Path is set to correct directory though Client 10.2.0.3 on Windows 2003 Thanks Message was edited by: user604101 Message was edited by:

  • Psexec is kicking my butt

    The set up is this: the police department, due to them running around all over the place, have mobile laptops are not joined to the domain. They have a cellular modem in vehicle, and move to wifi when at the station. I have an executable(EXE1) in a s

  • Details report for the retropay by element process

    I have ran retropay by element and i would like to create a detail report that will show me all the entries for a specific retropay element. For example i have Basic salary and the retro element for this is Basic Salary Arrears When the retropay by e

  • What tool should mac users recommend for convertng ulaw to .mp3 files. I used to use Goldwave on windows to convert ulaw to .mp3 files

    Hi, I recently switched to mac and I am not used to which applications to use What tool should mac users recommend for convertng ulaw to .mp3 files. I used to use Goldwave on windows to convert ulaw to .mp3 files Thanks, SK