Driver for ATI Radeon 9000 Pro 64MB

Greetings,
I'm buying the abovementioned card from a friend and need the driver for 9.2.1. This was a stock OEM card for PM G4 FW800 and perhaps others.
Will the driver be embedded in the 9.2.1 install or do I need to source it elsewhere?
Where on the Apple site can I find the driver or this card? I tried Support | Downloads but to no avail.
Many thanks for your help,
Matthew

Hi,
My question was answered in this thread: OS 9 Support Dropped By ATI?

Similar Messages

ATI Radeon 9000 Pro/ Layer heavy Photoshop project/

When working on large Photoshop files, whenever I make any move or change, file window goes blank, layers disappear, all that's visible is underlying grid.
Takes forever to do anything...
Is this a video card problem? Or is it my monitor? If a vid card problem,
what is a good replacement for ATI Radeon 9000 Pro?
ATI Radeon 9000 Pro:
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99702-127
Monitor:
L1975NW:
Resolution: 1440 x 900 @ 60 Hz
Depth: 32-bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No display connected
Thanks much!

How clean is your Photoshop scratch disk? The scratch disk is an often overlooked cause of PS slowness. Ideally, your scratch disk should have an amount of contiguous free space equal to at least three times the size of the file you are working on.

Need newest driver for ATI Radeon 3650 - Satellite Pro A300-1NT

Hello everyone,
I am looking for the newest drivers for ATI Radeon HD 3650 onboard Satelite Pro A300-1NT.
During playing Transformers: Revenge of the Fallen (2009) game by Beenox Inc ..... I get pixelized squares on tthe screen (instead of dust) and eventually blue screen.
I am using Windows XP Pro
I looked for drivers on *Toshiba website* and the only I found are:
12/01/09 Display Driver ATI Windows XP 8.477
*Game support* suggests upgrading driver for a newer one.
*Ati manufacturer support* have driver for ATI Radeon 8650 but not compatibile with Mobile Solution - and when asked for Mobile Ati support I got the ansfer:
+AMD Customer Care for ATI products does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.+
+ [http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx|http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx] +
I ask then are there newest drivers for Windows XP

Hi
I think you have already answered this question by yourself...
As you wrote you can get all drivers on the Toshiba website and if there isnt a newer driver available you can nothing more I think. Satellite A300 isnt a high performance gaming notebook so I think display drivers are not so important.
The only way to get a newer version is that you search on external websites. Maybe you can get the desktop driver working due some modifications I dont know but be really careful!!! Other drivers dont have an overheat protection and you could destroy the graphic chip. Be really careful what you do.
Alternative you can search on the Toshiba website for other notebook models with ATI card too. Maybe there you can get a newer version

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

ATI Radeon 9000 Pro and 1440x900 resolution on G4?

I am looking to purchase a new widescreen monitor (Viewsonic VA1912WB) which supports a native resolution on 1440x900. I am trying to determine if the ATI Radeon 9000 Pro card will properly support this resolution. Anyone have a clue, or tried it yourselves? Thanks!

I had found that page and had drawn the same "hopeful" conclusion that you are suggesting. I also looked in my displays preference pane and noticed quite a few options that aren't on the ATI site as "supported displays," which leads me to believe it's possible.
I've checked out some other boards (pc based) and they are able to make it work but it involves modifying all sorts of driver files. Stupid PC's!
Anyone else out there have the ATI card and the ability to test that resolution?

Final Cut Pro with a ATI Radeon 9000 Pro

I have an older Power Mac G4 that I have upgraded from 400Mhz to 1.4Ghz and a ATI Radeon 9000 Pro video card. I recently bought Final Cut Pro 2.0 and do not want to upgrade the video card yet again. Does anyone know of any work around to get Final Cut Pro to work on this computer?
Details are as follows:
Error message -
The installed graphics card does not support the OpenGL features recommended by Final Cut Pro.
ATI Radeon 9000 Pro:
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-A
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99703-107
Card # 109-99700-00
Model ATY,RV250
Vendor $1002 (4098)
ROM ATY, Radeon9000i_A
ROM# 133-99703-107
FCode Version 1.87
NDRV 1.1.0f53
VRAM 64
Any work around at all would be great. ATI told me to upgrade to 9600 AGP or 9800 AGP. I am not even sure the 9800 AGP will work on this vintage Power Mac.

It looks like http://www.apple.com/finalcutstudio/specs.html you will be able to run the basic Final Cut Pro program but, obviously, its not going to scream. Many of the individual elements of the suite i.e. Motion, Color, are not going to function as they should without a significant boost in several things, memory, processor speed, video card.
In all honesty, you should be running FCP 4.5 or 5.0 which will run very well with your hardware. But since you already have FCS2, (I assume that's what you mean, not really Final Cut 2) hang on to it for when you decide to do what all of us eventually will have to do; buy an Intel based box.
My G5 is fast approaching obsolete, and I'm just waiting for the next version of Final Cut Suite to see how much box I need to go to. Didn't think this time 19 months ago I would be saying that... but time does roll on.
You'll enjoy FCS2 (FCP6)

645 Ultra-C and ATI Radeon 9000 Pro

Hi there --
I have a 645 Ultra-C with P4 1.7mhz attached to it. It has 640mb of RAM, Audigy 2, and brand new ATI Radeon 9000 pro. It's running WindowsXP
The issue is that upon installing the ATI card into the machine WindowsXP is freezing and then recovering with an error message about a device failure. In checking the system log I see an error message about the ATI driver being stuck in a loop.
I am using the driver I downloaded from the ATI web site along with the ATI control panel software also downloaded from the ATI site. The drivers are the latest.
I am able to regain stability by disabling hardware acceleration in Display Properties. This is less then ideal.
I'm using version 7.2.0.1130 of the AGP driver. I'm not sure which BIOS rev, it would be the one the motherboard shipped with. However I'm unable to flash the BIOS really since I do not have access to a 98/ME box. As I understand it I can only flash the BIOS from a 98/Me startup floppy on a non-FAT machine. LiveUpdate gives me an error message about the service not being started and that LiveUpdate only works with MSI graphics cards.
In the BIOS I’ve switched the primary video card from PCI to AGP. I’ve even downgrade from AGP 4x to APG 2x using the AGP utility.
Any ideas?

flashed up to 1.90 via LiveUpdate2, after pulling ATI card and running on tnt2 card, and now I'm cranking

ATI Radeon 9000 PRO Mac Edition supported under Tiger ?

Hi all,
we are still using OS X 10.3.x for our venerable G4 AGP mac. Back in 2005 when Tiger was the new OS, we were told that our ATI Radeon™ 9000 PRO Mac Edition graphics would not be supported under 10.4.x. Has this changed? I don't want to upgrade to Leopard yet, but would like to use some Tiger features as Mail 2.0 or improved iSync.
Thanks for any input ...
Asbjoern

So is this why all my fonts are screwed on my G4 MDD dual 1.25 using a ATI 9000 Pro?
Seems as tho it works perfectly fine when i had 10.4.10 but when 10.4.11 was released all my fonts are screwed. Even when booting from a OSX CD. I installed 10.5 and still doesnt work.
looks like i need a 9600.

Can I use an ATI Radeon 9000 Pro Mac Edition 128MB Video Card in a Mac Min

Looking to buy a Mac mini.
In 2004 I upgraded the graphics card in my dual processor 450 MHz G4 desktop with an ATI Radeon 9000 Pro Mac Edition 128MB Video Card to run a 20-inch Cinema Display.
Now my G4 has died (probably the power supply and I'm being told it's not worth it to fix---buy a Mac mini!)
But I've read that the graphics card in the Mac mini is not stellar and I'm wondering if I could reuse the ATI Radeon 9000 Pro Mac Edition 128MB Video Card in the Mac mini. Would this be a good thing to do?
Any thoughts/advice would be greatly appreciated!
Cheers,

There are people that claim to have hooked up a PCI-e 1x card (yes, the Mini uses PCI-e). But that requires some serious hardware modifications including soldering, a PC power supply, and so on. But that card is an old AGP card so even that wouldn't even work for what you've got.

ATI Radeon 9000 Pro video card is conflicting with additional memory

I have a ATI Radeon 9000 Pro video card. I have a 645E Max motherboard (MS-6547). I recently purchased a 512MB dimm of Kingston PC2700 Cas 2.5 memory (KVR333X64C25/512) to go with the the 256MB dimm of the same model # above. I installed the memory and my screen stays blank. When I remove the new dimm it runs fine. I did get the memory and the motherboard tested at the store where I got the motherboard and they work fine. I came to the conclusion it was my video card when I removed all my components except the memory and the video card, and turned on the machine,nothing. I did try swiching dimm location and changing any bios settings I thought would make it work. I tried updating the video card drivers and motherboard AGP drivers. If anybody had this problem in the past could you tell me how you got it to work.

I took the board and the 2 dimms to the store where I bought them. They hooked up both dimms and a video card to the board. When it was powered up, both dimms were recognized. After I got home I proceded to determine if another component it conflicting with the memory. I started with both dimms and my video card the Radeon. I powered up with no other hardware connected and the screen remains blank. I remove the 512MB dimm and leave the 256MB dimm in, and powered up and pc booted up normally.

OpenGL 2 drivers for ATI Radeon X600 Pro ?

Help!
I play Second Life, and their latest upgrade 1.14.0 which is about to become compulsory is expecting drivers for OpenGL 2, and this version definitely has big problems with the ATI Radeon X600 Pro video card in my iMac G5 iSight, and will make the game virtually unplayable, and mess up my inworld businesses there.
Since this card is not listed on the ATI site, I guess we have to wait for Apple to update drivers. Are they going to soon, or do we have to wait for Leopard?
I thought Leopard was first quarter, that leaves one day left lol.

This is a fresh OS install on an external HD from my original 10.4.2 disks, and then Software Updated to 10.4.9. There are no outstanding software updates.
From System Profiler:
OpenGL:
Version: 1.4.7
Last Modified: 01/10/2005 05:13
Get Info String: OpenGL 1.4.7.14.0
And yet I have seen Core Duo Macs list OpenGL 2. Is there a problem with the Updater, or can a 14 month old iMac G5 with ATI Radeon X600 Pro not be updated to OpenGL 2?

ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

Hi guys!
How's everybody doin?
I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
I'm using 2 HD's (one with OS9), the other (with OSX)
I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
Thanx
Everyone is very helpful around here
Mike

Hello again Carl, and Dave
I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
with 9.2 and the ATI 9000 Mac Pro - take a look:
http://discussions.apple.com/message.jspa?messageID=4289264#4289264
Wonder if your driver would solve this?
But can I put your driver in the system while it's still functioning with the older OEM video card back in?
(that's the only way I can get the system not to freeze)
Thanks
Mike

G4 1.25GHz with ATI Radeon 9000 Pro ready for Motion?

Hi there,
I'm looking into an unexpensive way to give Motion 2 a trail, since it won't install on my old faithful G4 dual 500. Should the above configuration be enough? I have an opportunity tu buy the single processor, Airport Extreme equipped version (there were several versions produced the same year).

FYI the 9000 is a AGP (the 9200 is the PCI card)
the 9000 is lacking pixel shaders (where Motion gets it power)
I ran Motion 1 and Motion 2 since it came out on my dual 1.25 with a 9800 and it FLEW
better then a G5 with a 5200 or 9600
with this card (under $260)
http://eshop.macsales.com/item/ATI%20Technologies/100435058/
you can run motion very well for now on your system
(that page BTW pat is talking about the Standard video card not after market ones)
DAVE

How to get open source 3d driver for ati radeon?

Hi
I have a radeon7000 and I don't wanna use the fglrx driver. (ethical reasons...)
How can I install/use the free radeon driver?
Thank you very much
benny

pacman -S xf86-video-ati
Then use:
Driver "radeon"
in the video card Device section of your xorg.conf

Ati radeon 9000 pro mac edition....

...just wondering, as this card is now discontinued, what would be the going rate on eBay (or similar) for this card?
Before I pay to much!!
TIA

Most likely in the range of $80-100

Driver for ATI Radeon 9000 Pro 64MB

Similar Messages

Maybe you are looking for