Driver For Belkin

Can anybody tell where I can get a driver for a Belkin Bluetooth adapter, I have looked on the apple and belkin sites and found nothing.
( F8T012 Driver BTW 4.0.1.2401 version 2 mac)
CC.

You don't need a driver - like for most things, Mac OS X has Bluetooth drivers built-in, so just plug the adapter in.
Note that the Belkin F8T012 has been reported to be incompatible with iSync, although Bluetooth pairing and file transfers work ok.

Similar Messages

Where to find a driver for Belkin Bluetooth Adapter Dongle F8T017ng

where does one find a driver for Belkin Bluetooth Adapter Dongle F8T017ng?

From the manufacturer.
Did you google?

Driver updates for Belkin components busport.

Hello,
A friend has an old horizontal beige G3 to which was added a Belkin Components 2xUSB busport. The original floppy disk contains the driver for pre 8.5 systems, but the manual advises going to Apple UK website for driver updates for use with OS 8.5 to 9.
Can't find any sign of this update on Apple UK - which isn't surprising of course given how long ago it was issued, but can anyone point the way to a download for this driver? Would be most grateful..
Thanks....BC

The download that is available by itself is OK for 8.6. It specifically states it is not useable for later versions of OS9. It includes USB extensions v 1.4.1.
These are the extensions that install when you re-install with the card in place in the machine:
USB Extensions From Mac OS 9.2.1:
HID Library 1.5.5
USB Authoring Support 1.1.2
USB Device Extension 1.5.5
USB Mass Storage Support 2.1.1
USB Printer Sharing 1.0.2
USB Printer Sharing Extension 1.0.2
USB Software Locator 1.5.5
USB Support 1.5.5
USBAppleMonitorModule 2.1
From Mac OS 9.2.2
HID Library 1.5.6
SerialShimLib 1.5.6
USB Device Extension 1.5.6
USB Software Locator 1.5.6

The driver (MacJet) for Belkin F5U002-MAC USB-to-parallel adapter?

I have a Belkin F5U002-MAC adapter, that connects between my USB port on my computer, and the parallel port on my printer. The adapter was originally designed by another company (CAI), who gave a driver for it, I think called "MacJet". Then CAI sold the product to another company (about 2000), who sold it to Belkin (about 2003). Belkin no longer supplies Macintosh drivers (although they do have Windows drivers).
We can I get a driver for this product?
Thanks.
--Mark
PowerMac G4 Mac OS 9.2.x

Hi, Don!
You done good to find that page! I tracked down all its leads, and I'm still out in the cold.
I gotta believe at least one person on this planet still uses the MacJet software, and would be willing to send me a copy. Now all I gotta do is find him!
--Mark
PowerMac G4 Mac OS 9.2.x

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

Thunderbolt / USB3 questions about external backup drives for my new MacBook Pro

I have a new MacBook Pro retina 13". It has two USB3 and two Thunderbolt2 ports.
Until now on my iMac I've kept two backups on two WD USB2 drives. I have never had any problems with any of my WD Passport drives. One for Time Machine and one for CCC (a complete bootable clone incrementally created at 3:30 am every day).
I'd like to get new portable drives for my MBP for these backups going forward and have a few very basic questions, since this is the first time to have a device with a USB3 port, and the first time I even heard about Thunderbolt.
If I get a USB3 drive and need to use it to restore things on my older iMac, which just has USB2, will it generally connect and run with USB2 at a slower speed? Or would I have to get a drive with both USB2 and USB3 ports?
Is Thunderbolt just an Apple thing? Or is it a new standard widely used by peripherals now? I just never heard of it before. Is it faster than USB3?
Is it common for drives to have both Thunderbolt and USB2 connections?
Are there "hubs" for Thunderbolt like there are for USB? Considering the limited number of ports, I'm wondering the best way to connect 2 external drives. My iMac has 4 USB2 ports on the back, and I connect one drive separate to each of those ports, rather than going through a hub.
Is USB3 like USB2 in that if you have even 1 USB2 device (e.g. my Logitech headset) connected to a USB3 hub it will slow down everything on that hub to USB2?
Any recommendations for good, portable backup drives?
Thanks,
Doug

Hi Doug,
Lets see if we can address some of these:
If I get a USB3 drive and need to use it to restore things on my older iMac, which just has USB2, will it generally connect and run with USB2 at a slower speed? Or would I have to get a drive with both USB2 and USB3 ports?
USB3 is "backwards compatible" with USB2 so plugging a USB3 drive into a USB2 port should work, but at USB2 speeds.
Is it common for drives to have both Thunderbolt and USB2 connections?
Drives sold as Thunderbolt often (not always) have USB as well, drives sold as USB never (in my experience) have Thunderbolt connections.
Are there "hubs" for Thunderbolt like there are for USB? Considering the limited number of ports, I'm wondering the best way to connect 2 external drives. My iMac has 4 USB2 ports on the back, and I connect one drive separate to each of those ports, rather than going through a hub.
Yes there are (but don't expect them to be comparable in price to a USB hub) e.g. see here: http://www.belkin.com/uk/p/P-F4U055/
Is Thunderbolt just an Apple thing? Or is it a new standard widely used by peripherals now? I just never heard of it before. Is it faster than USB3?
I'ts an Apple technology (like firewire) and is far from widely used on peripherals. There ARE Thunderbolt drives etc by companies such as LaCie, WD etc but they are still very expensive (3 or 4x the price of an equivalent sized USB drive). For some this was a worthwhile expense since Thunderbolt is many times faster than USB2. But the arrival of USB3 has, in my opinion, changed the landscape. Yes, Thunderbolt is theoretically faster than USB3 (up to twice as fast) but benchmark tests have shown that in real world situations, the speed difference varies from no difference to Thunderbolt being 25 or 30% faster. When you take into account that USB3 drives are more common than Thunderbolt and are only a little more expensive than USB2 drives at present, then it's a "no brainer" as far as I am concerned.
Hope this helps.
Jon

Any driver for Marvell Libertas (88W8335), aka TENDA TWL541P

After numerous attempts with a TENDA W311U, aka Ralink 3070, and no replies from the Thai support address, I want to know - I have another TENDA, a TWL541P based on the Marvell Libertas 88W8335 chipset - Is there a Mac driver for it? It needs to work on an old G3 with OS X 10.4.11 and 9.2.2. Any help will be appreciated.

I'd give up on the Libertus, see last post here...
http://www.insanelymac.com/forum/index.php?showtopic=86353
Did find a couple for Marvell 88SE61xx, but they require 10.5.2...
http://wiki.osx86project.org/wiki/index.php/3rdPartyDrivers
Possible clues of other wifi devices that use Marvell chipsets...
http://marvell.rapla.net/
When you say 9.2.2, does that mean in Classic under OSX, or native 9.2.2 boot?
If the first, OSX is handling the HW, if the second I think your only hope is an Ethernet->Wifi adapter...
http://www.amazon.com/Belkin-F5D7330-802-11g-Wireless-Ethernet/dp/B00020H1TG
http://www.amazon.com/D-Link-DWL-G810-Ethernet-Wireless-Adapter/dp/B0000CEPCH

"Window 2000" driver for "PalmConnect USB Adaptor"

I have to set up again a PC with Window 2000 and sync. with my Palm Vx with PalmConnect USB but I have lost the CD. Palm's web has no more download for the adaptor. Where can I found the driver?
Post relates to: Palm Vx

it's hard to find a driver for this accessory. are you sure it's a palm branded USB connect kit? there are other similar brands that produces this type of accessory such as belkin.
the 2k drivers has been discontinued i guess however the xp driver is still available at the palm website.
http://kb.palm.com/wps/portal/kb/common/article/49184_en.html

How can I use one external hard drive for both Time Machine and iPhoto Library?

I have been using a 1 TG LaCie external hard drive for Time Machine backups. My (older) Mac has 160 GB and is almost full. I would like to move my iPhoto Library to the external hard drive, but I've heard Time Machine doesn't share one space well. Should I
1. create another partition (but will this erase what I've already saved) with Disk Utility? *I am running Snow Leopard*
2. create another volume to use for iPhoto, and if so, should the two volumes be of equal size?
3. leave it with one partition and move the iPhoto Library to the same partition with Time Machine back ups?
I know I don't need the entire 1 TG for back up of 160 GBs. Please advise the best path to take. Thank you!

You are getting incorrect information from your ASP. If you look at drive specifications the heat generated is no different for high vs low capacity drives.
I have upgraded the internal drive in my iMac 2007 with a 3TB Hitachi drive without any heat issues or other problems.
Larger hard drives have higher density platters so to access any given amount data the drives travel a shorter distance. Higher capacity drives should therefore run cooler than lower density drives because the drive spends less time spinning to access data.

Bluetooth Driver for dell(Inspiron N5110(ST: 3v82np1 ) is still not working well.

Hi,
I have tried installing "Dell Wireless 1701
802.11 b/g/n, Bluetooth v3.0+HS Driver "
But I saw neither wireless nor Bluetooth was defined.
As the drivers listed below are only the driver for wireless and bluetooth, I almost tried all of them, except the last three.
File TitleImportanceRelease DateVersionActions
Intel Centrino Wireless-N 1030 WiFi Driver
(Driver)
Other Formats
Description
Intel 6230/N1030/N1000 WiFi Driver for win7 64-bit This package provides the driver for the Intel Centrino Wireless-N 1030 WiFi Driver and imore…
Intel Centrino Wireless-N 1030/Advanced-N 6230
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Wireless-N 1030/Advanced-N 6230 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS
Driver
(Driver)
Description
This package provides the Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS Driver and is supported on Inspiron N5110 and Vostro Notebook 3more…
Dell Wireless 1702 WiFi + Bluetooth Driver
(Driver)
s
Description
This package provides the Dell Wireless 1702 802.11 b/g/n, Bluetooth 3.0+HS Driver and is supported on Inspiron and Vostro Notebook models tmore…
Intel Centrino Wireless-N 1000, Centrino Advanced-N
6230, Centrino Wireless-N 1030, v.14.2.0.10, A01
(Driver)
Recommended
Description
This package provides the Intel Centrino Wireless-N 1000/1030, Advanced-N 6230 Driver and is supported on Inspiron N5110 and Vostro Notebook more…
Intel Centrino Advanced-N 6230/Wireless-N 1030
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Advanced-N 6230/Wireless-N 1030 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Add to My Download List
Dell Wireless WLAN 1502 Half Mini-Card Driver
(Driver)
Description
This package provides the driver for Dell Wireless WLAN 1502 Half Mini-Card and is supported on Inspiron Notebook and Vostro Notebook modelmore
Intel WiMax Link 6150 Driver
(Driver)
Description
This package provides the Intel WiMax Link 6150 Driver and is supported on Inspirion and XPS Notebook models that are running the following
Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100
Ethernet Controller Driver
(Driver)
Description
This package provides the Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100 Ethernet Controller Driver and is supported on Inspiron N5110 amore…
I had to install Dell Wireless 1702 WiFi +
Bluetooth Driver
The wireless adapter was defined by this driver, however, the Bluetooth still has an exclamation mark in front of it, and when the Dell WLAN and Bluetooth client installation finished, a pop up message said that Windows couldn't install the device
well, although there was a folder added in documents folder named 'Bluetooth Folder'
Yes, the Bluetooth was named with 'Generic Bluetooth adapter' before installing 'Driver above'. However, after installing the driver above, the Bluetooth adapter named with ' Dell wireless 1702 Bluetooth v3.0". But as you see it's
still not working will.
The sceen shot shows the device manger before installing Dell
Wireless 1702 WiFi + Bluetooth Driver
These screen shots shows the device manger after installing Dell
Wireless 1702 WiFi + Bluetooth Driver
I've lit windows detect the operating program for this device on the internet, it said "Windows has detected that the operating program of this device is up to date. As this screenshot shows.
What should I do because nothing lift to try? If you have a look at the ninth drivers in my previous message, you will see that no other drivers for Bluetooth lift.
Also, I have tried to install Intel
Centrino Wireless-N 1030 WiFi Driver
But I have been told that "the installation is blocked', This package of installation cannot be installed on your system' I don't know what this
means, is it because Dell Wireless 1702 WiFi +
Bluetooth Driver is being installed
Could you please take some of your preciout time out to read carefully my points below to finish this problem?
first:
Yes, if you had a look at my first post, you would have seen that I really have downloaded and installed the drivers suitable for bluetooth, which was only Dell
Wireless 1702 WiFi + Bluetooth Driver, which made the bluetooth recognized by Windows 7(64Bit). However, the bluetooth in the device manager still has an exclamation mark as it is shown in the device manager.
I don't have any other drviers which can do more than the what Dell
Wireless 1702 WiFi + Bluetooth Driver did because I have tried all the drivers listed under 'Network', exept the what are for Etherent.
Yes, when I have tried adding the bluetooth between two laptops(Mohammad and Nasreen). the bluetooth was added for both laptops as you see in these screenshots below:
The Bluetooth devices of Nasreen's laptop whose bluetooth is having some problems in Device mangage.
The Bluetooth devices of Mohammad's laptop whosse Bluetooh is defined well in device manager.
But there is still problem in the device managre as shown in the screenshot listed before.
Second: (Important) That when I want to send files or recieving between two bluetooth added in either laptop, I could send them. Also, when I open the Mohammad's bluetooth added in Nansreen's laptop( screenshot
below), I can show what is inside it.
However, when I open the the Nasreen's bluetooth addd in Mohammad's laptop, I noticed no reponse at all because as you see that disconnected is written in fornt "Nasreen-Pc" as this screenshot:
Although sometimes Nasreen-Pc gets connected as screenshot below, but I am still not able to open the Bluetooth folder of Nasreen-pc from Mohammad-pc. When trying to do that, no response is there.
In other times, Nasreen-pc gets connected for a while, but it comes back disconnected.
Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose Bluetooth is having some problems in the device manager.(First Screen shot below) However,
the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
Finally: : when I clicked "right-click" on "Nasreen-PC" and then clicking on "detecting and troublshooting issues", I found that windows informed me that :
But which driver should I reinstall because I have already installed the Dell
Wireless 1702 WiFi + Bluetooth Driver almost twice?
A man should convert his anger and sadness into strength to continue living in this life.

Certain driver packages contain drivers from some of the essential services only and for additional services, separate drivers must be installed. Additionally, the service is installed only if a compatible device is installed (or paired).
Therefore, you are seeing the error.
If you are using the Bluetooth L2CAP Interface and Bluetooth Remote Control services and not able to install the services, you can try unpairing the device, restart the PC, pair the device and then check. If that too fails, you need to install a suitable
driver, sometimes even other OEM drivers solve the issue. You can Bing/Google about this. You can also contact Dell Support for more information.
Balaji Kundalam
Thanks a lot,
I really didn't understand what you mean with in your first part the service is installed only if a compatible device is installed (or paired).
The Bluetooth is integrated with
the laptop, then where other services will come from, all service are related to Bluetooth.
If there are some additional services not related to Bluetooth,
then how can I either let them functioning well or disable them in order to get rid of the yellow exclamation mark
on the name of my laptop in the Device and printers.
Also, I really have installed a
BCBT7(Broadcom Bluetooth) for HP which really defined the same Bluetooth issue,
Device manager after installing the entire setup of driver BCBT7(Broadcom Bluetooth) on HP laptop
but when trying to install the same
BCBT7(Broadcom Bluetooth) on Dell, I faced the error below, although there is an icon for Bluetooth in
the system tray. Also, the Bluetooth is integrated as
you have seen in the device manager.
You didn't answer me: Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose
Bluetooth is having some problems in the device manager.(First Screen shot below) However, the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
A man should convert his anger and sadness into strength to continue living in this life.

Tiger OSX Driver for eMagic AMT-8 - AMT no longer seen in AudioMidi

Can anyone here tell me where to find the driver for the AMT-8? It seems "missing" from the Apple and Emagic websites. AudioMidi is still not seeing the interface although "About this Mac" sees it just fine.
Also, no driver for it in the Library like my other interfaces.
All previous links to the driver are no longer valid.
Thanks!
Matt @ Post Pro
[email protected]

That link to the Apple site I've looked at a hundred times. You know, if I look one more time MAYBE it will be there this time. The ONLY one I've seen on there that is close is the Unitor Command software, but that's not quite it. Is it hiding in one of the other 3 folders and I'm just too blind to see it?
If you can email it to me that would be great. Just use the: "[email protected]" address so that I can grab it on the road easier.
Thanks Much!
Matt @ Post Pro

Where can I download a Windows 7 64bit driver for the hp CDDVDW TS-L633N on my cpq60-615DX

EDIT --
I neglected to say that I tried updating the driver from the Device Manager device window and the result was a message saying it could not find a newer driver, that the one installed was correct.
Another EDIT
I also did not say that I have uninstalled the device, through Device Manager. Upon restarting the system, the drive was found and software installed but the problem remains.
Original message follows:
System: CPQ60-615DX
Windows 7 Home Premium 64bit
Drive: hp CDDVDW TS-L633N
In the process of installing some Roxio software, Creator 9, an unusable driver, are part of one, was installed. Now the device is not working.
When I didn't see on the list of devices on Windows Explorer, I went to Device Manager and found that it was flagged with the "problem" icon (exclamation point on a yellow background).
The General Tab Device Status box contains"
A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)
The following information is shown for the device:
hp CDDVDW TS-L633N ATA Device Properties windo
Driver Tab:
hp CDDVDW TS-L633N ATA Device
Driver Provider: Microsoft
Driver Date:     6/21/2006
Driver Version: 6.1.7601.17514
Digtal Signer:   Microsoft Windows
Driver File Details:
hp CDDVDW TS-L633N ATA Device
Driver files: c:\Windows\system32\Drivers\cdrom.sys
Provider:         Microsoft Corporation
File Version:     6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:        Microsoft Corporation. All rights reserved.
Digital Signer:   Microsoft Windows
c:\Windows\System32Drivers\PxHlpa64.sys
Provider:         Sonic Solutions
File version:     2.03.27a
Copyright:        Copyright 2003 Sonic Software
Digital Signer:   Not digitally signed
It appears that the Creator install installed part of the driver but not one that functions. It might be a problem with Windows 7 or the fact that this install is 64 bits.
I have searched the HP site and can't find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not shown.
I downloaded and installed the HP driver search program - or whatever it is called - and ran it. There were no devices listed on "Optical Drive" tab when I looked at the results - it could not "see" the drive.
I realize that what I need is probably a generic driver from MS, that's why one is not shown on the HP site, but how do I go about finding the right one for this device?
Is there a generic "one size fits all" driver for Windows 7 which can drive this device?
Any assistance will be greatly appreciated.
Bob and Simon
This question was solved.
View Solution.

HI nhgfdstr:
Thank you for your inquiry. I am pleased to assist you!!
I am sending you a link to a "CD/DVD Drive Is Not Detected (Windows 7)" click here. For your convenience here is a document on "Downloading or Updating Software and Drivers for HP Computers"   click here.   I am also sending you a link, to third party site, with a driver for your hp CDDVDW TS-L633N , " Hp CDDVDW TS-L633N ATA Device Drivers Download" click here.
Happy Holidays!!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Can I format and use a Hard Drive for my mac if removed from a Desk Top PC

Hi All,
I wondered if you can help with some advise. I have a mackbook and love it, will never go back to pc. But, I have a desk top pc with a fairly sizable Hard Drive in it. Even though I also have a WD external Hard Drive for my macbook back up, would I be able to use my old desk top hard drive if I found a case for it to make it an 2nd external hard drive?
Would I be able to format it for use with my mac? Or is it the bin for all the hardware?
Thanking you in advance.
Matt

It'd work just fine. Apple uses pretty much the exact same parts every other computer maker does. The one exception is now they have a temp sensor cable connection built onto drives. Before they just stuck a little plastic clip on them at a specific spot. Other than that, it's no different from any other SATA drive you might buy at the likes of Best Buy or NewEgg. So as long as you partition the drive into a format readable by Mac OS X, there shouldn't be any problems.

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

Driver For Belkin

Similar Messages

Maybe you are looking for