Driver for Creative graphics blaster 3D CLGD5464 pci vga card

Can anyone tell me from where to find the driver for Creative graphics blaster 3D CLGD 5464 pci vga card. The driver in Solaris8 is for CLGD 5465 which is not compatible with my card. The solaris detects my card as CLGD 5465 but it doesent work. Can anyone tell me what should I do about it?
thanks, Kashif ([email protected])

If it is not supported by the Xserver under Solaris you may find you can get it to work by installing XFree86 (www.xfree86.org), there are compiled binaries for Solaris Intel that will make the transition easier (personally I found the 3.3.5 version works well). First check at www.xfree86.org if your videa-card IS supported under XFree though. There are some tweaks you need to add to get it all to work in the Solaris x86 FAQ. Since you probably have to do all of this in non-gui its not easy but can be done.

Similar Messages

Pin Specifications for Creative Sound Blaster Audigy SB1394

;Pin Specifications for Creative Sound Blaster Audigy SB394 I have a Sound Blaster Audigy SB934 CA000-IAF Creative Tech '0 AA299J basically a Sound Blaster Audigy Platinum (wiouth the front bay for conectivity.)? And since I dont' have the front bay for heaphone and mic conectivity I was wondering if there is a spec sheet for the 40-Pin conectivity that is used for the front bay. I was wondering if anyone could provide me with such spec sheet so that I can try to conect my frontal Intel board plugs for headphone and microphone (would like to use my headset.)
There are a lot of pins on the card and well only about 8 in the conector for the front plugs. So if any dev from the forum is reading this I would greatly apreciate it if I could use my front Intel sound plugs on this old model card.
Thank you for all your help.

http://www.driverheaven.net/audio-general-technical-discussion/5279-creative-audigy-2-ad_ext-pin-assignment.html
That will help you with the pin assignments.......
And you can also try one of these to connect a lot more easily to your front panel audio jacks.......
www.x-tap.com
I used the above with four Audigy LS and SE's and it works a treat!

Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac? thank you!

Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac? thank you!

THank you very much, I I have a ton of Adobe programs on my mac and i think a Cuda driver update was installed with it, it just popped up the other day in my system settings and is asking to upgrade my graphics card, but i don't have the same card as this update... so i thought i would double check! thank you again.

Satellite M60: can not install the newest driver for my graphic card

Can not install newest driver for my graphic card
Satellite M60
ATI MOBILITY RADEON X700

Hello
First of all I really dont understand why you start two topics with the same theme. It is much better to have one topic with good content and interesting comments. Am I right? ;)
Anyway, in your case it is interesting that Toshiba use adapted drivers because of hardware protection. That means that graphic card will not be forced to run at the maximum level. Hardware cooling in notebooks is very problematic and high temperature can result with overheating or hardware damage. All hardware components are placed on small place. Graphic card produce a lot of warmness and it is not so good for all other hardware.
When you use non-Toshiba driver graphic card will be forced to run faster. Because of that every notebook manufacturers dont support usage of third part drivers. The fact is that hardware protection is priority.
I didnt make any experiments but according to some reports on this forum there is way how to install non-Toshiba graphic card driver.
Please check this forum and you will find many comments about that. One interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

Driver for Creative EMU10K1 SB Live! Audio Proces

Hi!
I'm looking for a driver for Creative EMU0K SB Li've! Audio Processor but can't find it!
Please can somebody help me? Many thanks!
greetings
anwo

Hi
Two ways to find the type number.
What Operating system are you using?
Open your PC case and look the serial number of your sound card.
#2
Run System Information tool and see from Components/Multimedia/Sound device what
PNP device ID says.
Fill this (change x with numbers) with your numbers
DEV_xxxx&SUBSYS_xxxxxxxx.
I can solve then the type.
You can download the full (I think) Li've! driver package from : check your PM.
or Check these sites
- http://drivers.soft32.com/index-2-2--0-4.html
- http://www.softlookup.com/driver/latest.asp
- http://drivers.softpedia.com/get/SOUND-CARD/CREATIVE/
.jtpMessage Edited by jutapa on 04-0-2005 0:3 PM

Driver for Creative WebCam Vi

I have get driver for Creative WebCam Vista

Hi
Two ways to find the type number.
What Operating system are you using?
Open your PC case and look the serial number of your sound card.
#2
Run System Information tool and see from Components/Multimedia/Sound device what
PNP device ID says.
Fill this (change x with numbers) with your numbers
DEV_xxxx&SUBSYS_xxxxxxxx.
I can solve then the type.
You can download the full (I think) Li've! driver package from : check your PM.
or Check these sites
- http://drivers.soft32.com/index-2-2--0-4.html
- http://www.softlookup.com/driver/latest.asp
- http://drivers.softpedia.com/get/SOUND-CARD/CREATIVE/
.jtpMessage Edited by jutapa on 04-0-2005 0:3 PM

K9N Neo V3 : PCI-E and PCI-E x1/PCI VGA cards at the same time ?

Hello,
I'm thinking about getting one more VGA card to resolve my dual screen issue :
Quote
I use two monitors. PC monitor as first screen, TV is extended for watching videos.
PC : Philips 220aw (22", 1680x1050 @ 60Hz) DVI-DVI
TV : LG 42lh3000 (42", 1920x1080 @ 24Hz) DVI-HDMI
I've been trying to get smooth playback on the TV for days, but random stutter happens.
When a video (mostly HD contents) is played on the TV while using the PC monitor, things like minimize/maximize windows, page scrolls stutter and so does the video. Idle while watching videos also stutters randomly.
I tried almost every combinations of renderers/codecs/players, tried by desactivating aero and all the fancy graphics, but it didn't solve the problem.
The only way i get smooth playback on the TV, is by desactivating the PC monitor. (Using nVidia panel or "Win" key+P), so only the TV is active.
I tried with a Blu-Ray using DXVA and it was smooth.
I haven't got a chance to test with a better graphic card yet. This issue doesnt happen on XP though.
Here are the specs :
K9N Neo V3
Athlon 64 x2 @ 3Ghz
4Go DDR2-800
8800 GT 512Mo (driver 197.45)
Win7 Ultimate 32 Bits.
Corsair 450W 80+
My question is : Can i add a PCI-E x1 or a PCI VGA card on this motherboard, so each screen will have its own VGA card ?
If so, both nVidia or ATI would work ?
Thank you.

It would be one of these, if it is allowed by the K9N Neo V3.
http://www.club3d.nl/products/products_ending_page_7_with_id.cfm?product_id=154
http://www.club3d.nl/products/products_ending_page_7_with_id.cfm?product_id=223
I will try to test with an ATI card if i can find one.

Driver for SoundBlaster X-fi Xtreme audio Pci Expr

I bought a sound blaster X-fi X-treme audio Pci Express,Two weeks ago. Then I travelled to Brazil...When I got here in Brazil ,I notice my dvd Driver wasn`t scratched,but broked...And there is no driver for this type of sound card in the site...Someone can HELP ME?

please tell me how much of your CPU is using this card when you are just listening to music .
you can find the drivers here:
http://us.creative.com/support/downl...ype=0&x=20&y=7

Driver for Creative Soundblaster Live! 5.1 for XP

What is the latest driver for that card?

Officially this,
<a rel="nofollow" href="http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=50& prodName=Li've"]http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=50& prodName=Li've[/url]!%205.&subCatName=Li've!&CatName=Sound+Blaster
Unofficially this,
<a rel="nofollow" href="http://forums.creative.com/t5/Sound-Blaster/SB-Li've-series-Support-Pack--5-08-09-2009/td-p/53386"]http://forums.creative.com/t5/Sound-Blaster/SB-Li've-series-Support-Pack--5-08-09-2009/td-p/53386[/url]

Driver for creative web cam vista model no 1100

please send me link or driver for my creative web can vista model no pd 1100 for windows xp
my mail id is [email protected]

samram wrote:
Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx
SB0680 : Creative Sound Blaster 5.
http://www.creative.com/products/product.asp?category=&subcategory=207&product=484
Maybe you can install these drivers/software.
jutapa

Driver for Creative Sound Card Model no: SB0

Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx

samram wrote:
Cud any tell me how cud i acquie the driver for the Creative Sound Card by the model no SB0680. The original CD that came with the packing had lost. Hope cud any help me on this. Thanx
SB0680 : Creative Sound Blaster 5.
http://www.creative.com/products/product.asp?category=&subcategory=207&product=484
Maybe you can install these drivers/software.
jutapa

Driver for Creative SB Live! Value (W

I found the yellow ? in the device manager on "multimedia controller" and "multimedia audio controller" . I suspect it is a missing driver, but cannot find it in the SB product list.Please help,Izzy

got this from http://www.softwaretipsandtricks.com/forum?"This is the audio driver for your Intel board
http://downloadcenter.intel.com/Deta...nal &lang=eng
Set a System Restore Point before installing drivers just in case
Start / All Programs / Accessories / System Tools / System Restore / select Create a restore point and follow instructions__________________
"odwnload, unzip, doubleclick setup and pray. it worked in my PC!!izzy

Best Throughput for RAID - Internal SATA vs. PCI RAID Card

Hi, we're upgrading our old server, which has been on an upgraded G4. We put 3 SATA drives in it, connected to a Highpoint 1820a RAID card running RAID 5.
We're moving this to an older G5 1.6 GHz model (2003). It currently has 2 internal SATA drive bays, but I know can be expanded with an adapter kit. It also has just plain PCI slots (not PCI-X or PCIe).
So I'm wondering what would provide better performance (throughput I guess):
• Using the 2 internal bays with a software RAID 1?
• Putting our old Highpoint RAID card in the PCI slot and running RAID 1 or possibly RAID 5 (with another drive)?
I know the RAID card doesn't use the processor for RAID functions, but I think in a RAID 1 it's fairly minimal, correct? I'm mostly wondering if the older basic PCI slot would bet the bottleneck in a fast system compared to the onboard SATA controllers?
THANKS!

Well, we're most concerned with data security and reliability. We're not streaming video or anything else that would demand extreme throughput. The server is mostly serving files to 4-5 users. So I imagine the performance gains would only be noticed when opening/closing files off the server, correct?
And we already own the Highpoint card, which has 8 internal SATA ports, so we'll probably use this. It works fine on PCI bus. So we can run this with 4 drives in either two RAID 1s (boot & files); a RAID 5, or a RAID 10.
We'll probably stick with Western Digital or Seagate 'enterprise' SATA drives, such as the WD RE3.
So, do you think we would see much real-world difference between the different RAID options (RAID 1 software, RAID 1 hardware, RAID 5 hardware, RAID 10 hardware)?
Thanks!

Upper Limit On HDD Capacity For QS G4 2001 Model W/PCI ATA133 Card?

Hey Everyone,
I currently have a Tempo ATA133 PCI card installed in my QuickSilver G4 2001 system (http://www.sonnettech.com/product/tempo_ata133.html). To address capacity issues, I'm considering adding a very large 500 GB, 7200 RPM ATA133 Hitatchi HDD (http://www.newegg.com/Product/Product.asp?Item=N82E16822147008), which would connect to this PCI card.
Does anyone have reason to believe this configuration would cause issues, or if there's an upper limit on the amount of HDD space a PCI ATA133 card can support?
My feelings are that this configuration will be fine, but I'd like feedback before I proceed.

Good information bhgdfh! I'll have to reinstall OS 9 it seems to load the firmware, which is fine. If I end up buying the drive, I'll post the results! Meantime, I'm keeping the question unanswered in case anyone else has additional input.

Suggestions for: external SATA array with a PCIe SATA card??

Seems like this would be a good idea but have no idea what hardware to be considering.
external SATA array with a PCIe SATA card
Thanks
John

Seems like this would be a good idea but have no idea
what hardware to be considering.
external SATA array with a PCIe SATA card
Thanks
John
I purchased and internal raid kit, Rocket Raid 2320 card and Maxupgrades kit. This guy will help you get your equipment running with over the phone with personal customer service. He has external configs also.
http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category _id=313&CFID=3649947&CFTOKEN=58951206
Good Luck
Z1&V1user

Driver for Creative graphics blaster 3D CLGD5464 pci vga card

Similar Messages

Maybe you are looking for