Driver for CT4660 digital I/O card - with Soundblaster Live SB0
Hi - I searched the Knowledge Base here and the Support Driver section of the Creative Labs website and nowhere can I find a driver for the Digital I/O card CT4660. I have a Soundblaster Li've SB000 and the digital I/O card together with the connector cable. Can anyone help me out or point me in the right direction? Googled the web too, but just found one other message of someone looking for the same thing with no replies posted to that thread.
Thanks and happy New Year.
Mike
ort 0) configured for buffered output. Intermittently the following error appears, "An exception 0E has occurred at address in VxD NIPALK (01) + address. This was called from address in VxD NIPALK (01) + address. It may be possible to continue normally.I've never seen this error before, but there is a newer version of the NI-DAQ driver (6.9) available for download from the NI website at:
http://digital.ni.com/softlib.nsf/current
Similar Messages
-
Is there a driver for NI Digital I/O cards for Venturcom RTX without LabView?
I'm looking for Digital I/O cards (PCI) for use with Venturcom RTX app (without LabView) and, since LabView RTX is based on Venturcom's RTX, I was hoping that NI might provide RTX drivers for their cards.
Dear Martin,
I have looked for information for PCI DIO drivers for use with the Venturcom RTX application without LabVIEW, unfortunately NI does not produce any RTX drivers for NI cards.
I would advise you to use register level programming, below is a link (even though it is for a PCI 6036):
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000000A320000&ECategory=Measurement+Hardware.Real-Time
Unfortunatley this is limited information.
Kind Regards
Louis Price
Applications Engineer
|National Instruments -
Is there a driver for Windows 8.1 that works with HP Scanjet 5500c
Is there a driver for Windows 8.1 that works with HP Scanjet 5500c
Thank you.Hi,
I afraid you will not be able to use the scanner with Windows 8.1, it is not compatible with the OS.
Regarding VueScan, I afraid it would not be an option as well, the application only support your scanners if there are drivers for the OS:
If there isn't an HP scanner driver at www.hp.com for your operating system, then unfortunately VueScan won't work with this scanner.
You may try using the Vista drivers by running the drivers using the Program Compatibility Troubleshooter as listed below.. select Not Listed from the programs list and browse to the installation file for Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03401961&lc=en#N63
The installation file for Vista can be downloaded below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-47405-1&cc=us&dlc=en&lc=en&...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Where can i get a unix driver for a Trident VGA9000 video card online?
where can i get a unix driver for a Trident VGA9000 video card online?
http://www.driverguide.com/archives/archive5/905.html
-
Dos Driver for ni pci-485 interface card
Can any one give details about availablity of Dos driver for NI PCI-485 Interface Card.
ThanksThe PCI-485 uses standard 16550 UARTs, and while there isn't a packaged DOS driver avilable, you should be able to use the card in DOS applications by configuring the software to use the base address assigned to the UART that you wish to use. One important note is the RS-485 wire modes which are configured via the scratch register. The user manual documents how this is performed.
-
Need driver for hp laser jet 4 plus with windows 7
need driver for hp laser jet 4 plus with windows 7
Hi,
A friend of mine uses USB-Parallel cable, he was saying it's ok
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.
Plug a NAS into the BT Hub that does TM. Look at Synology.
You just use the wireless of the hub.
But the cheapest solution is still the TC. -
Anyone have a driver for the ImageClass D860 that works with a Windows 8 64 bit computer?
Please help. If anyone has or knows of a driver for the ImageClass D860 that works with a Windows 8 64 bit computer, please send it or the link to me at [MOD removed email address per FORUM GUIDELINES]. Thx.
I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.
-
Windows 7 64-bit driver for Canon Digital Rebel XT
How do I interface my Canon Digital Rebel XT with a computer running Windows 7 64-bit?
You are correct. Canon does not provide a driver for Windows 7 64-bit. You have to change the communication mode in your camera and then use Windows Photo Gallery or other software to transfer the photos. Here is the response that I received from Canon tech support (it works):
"To connect your camera to a Windows Vista or Windows 7 computer, you'll need to change the communication mode.
To set your camera up for this, please do the following:
With the camera disconnected from the computer, turn the camera on. Press the "Menu" button. Now select the [Wrench, Hammer, 2] tab. Scroll down to "Communication" and press the "Set" button.
Select the [Print/PTP] and press "Set". This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT Instruction Manual.
Now connect your camera to your computer and turn the camera on. Your computer should now recognize and have access to your Digital Rebel XT.
Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
You may download your pictures using Windows Photo Gallery, or you may use a card reader to download images. If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com." -
Driver for VM3608A: DIGITAL-TO-ANALOG CONVERTER
Hello,
can someone help me to find a driver for the VXI-Card VM3608A? Im using
Labview 6.02 and the VXI-Cards are running in a firewire-controlled frame.
On which sites can i search for a driver?
Thanks for your help.
MartinDear Martin,
Many instrument drivers can be downloaded from NI by going to http://www.ni.com/devzone/idnet/ and selecting "Search for a Driver." In this case, the driver for the VM3608A is not available on the NI web site. This driver is available from VXI Technologies, the manufacturer of the VM3608A. You can download the driver by going to http://www.vxitech.com/download.asp and selecting the appropriate instrument driver.
Regards,
David Shatila
Applications Engineer
National Instruments
www.ni.com/support -
Printer Driver for Epson Stylus R800 Printer Included with OS X 5 Leopard
How many faulty drivers may there be included with OS X 5 Leopard?
After installing OS X 5 Leopard I found that when using my Epson Stylus PHOTO R800 printer photograph prints and ordinary lettering were extremely feint and unusable.
From the list of printers installed with OS X 5, as given in Apple "K"base Documents, I checked the version number of the driver for the Stylus Photo R800 and it was given as "SPR800 3.09 app"
I next checked the latest driver specified by Epson on their website---it too was given as
"SPR800 3.09 app".
Despite this information I downloaded the "SPR800 3.09 app" from Epson and installed it and the problem was solved.
I am writing this to inform others that despite the driver included with OS X 5 being specified as
"SPR800 3.09 3.09" it certainly is not!!!
The only answer is to use the latest version provided on the Epson website.Dear scb
Many thanks for taking the time to reply to my post, you are so right in your remarks.
Although I've been on Macs for around 25 years I hadn't come across something as blatant as this before---maybe I've been lucky!
Your comment regarding the avoidance of software included with the product is very relevant particularly at the present time, so soon after the release of OS X 5 Leopard. There must be thousands of printers and the like which are being sold right now with software applicable to OS X 4 Tiger included with them.
DLS -
Is there a driver for Samsung CLX-3170 that works with OS 10.9.4 ?
Since I installed Mavericks my Samsung CLX-3170 Colour laser printer does not work properly. Is there a new driver for this ? I had a long chat with Samusng help desk that was totally inconclusive. Trying to re-install the printer I was told that there is no driver currently available. HELP !
You can try looking on these 2 sites for a driver.
Gimp - Print
HPIJS for Mac OS X -
Cant install a NIVIDA driver for my NIVIDA GeForce GS Card
I was told in a seperate discussion that I could use the Windows 8 driver for this Windows 10 Technical preview.
I am running a 32 Bit copy of the preview.as this processor will not run 64 bit programs.
I have down loaded the Windows 8 32 bit copy of the NIVIDA 7300 GS driver.
I ran the install and but it said it installed but had a "!" by it in the Device Manager!
I have tried to run the install and it shows up as the Video driver in the Device manager but it states the following under the driver:
"Windows has stopped this device because it has reported problems. (Code 43)"
Can someone help me with a driver.
Not sure how to get the NIVIDA board running at over 600x800. So if anyone has any input please let me know, running at 600x800 is a bummer.WA8FRD
Did you install the win 8 driver in compatibility mode?
To install in compatibility mode do the following:
Right click the installer>properties>compatibility>choose OS
http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
(works in vista, win 7, win 8, and win 10)
Wanikiya and Dyami--Team Zigzag -
Looking for a serial driver for an agilent 4395A to work with labview
Can only find one for gpib I have no interface for gpib on my PC but i do have a rs232/gpib converter and was wondering if I could get a serial driver for the agilent 4395A for this.
ThanksI've only used the RS232/GPIB converter to go from a GPIB bus to a serial instrument so I can't speak for going the other direction but I would give it a try. However, you have big problems with the driver if its the same one I just downloaded from NI. It's not really what I would call a driver at all but an application program meant to be used stand alone. There is no breakout of instrument functions into subVIs and none of the controls or indicators are on the connector so you can't even use the high level app as a subVI without a lot of work. It is a contributed driver but I'm surprised NI accepted it because it doesn't follow any of the published rules for an instrument driver. It's not even a good example of program design, imho. There is a VISA dr
iver available from Agilent here and I would try that instead. To use a VISA driver with a serial port, you just specify the VISA resource name for that port instead of the GPIB resource name. For example, a GPIB resource name of an instrument with an address of 5 would be "GPIB::5::INSTR". To communicate to your instrument over com port 1, the VISA resource name is "ASRL1::INSTR". If the instrument has a serial port in addition to the GPIB, you could also try skipping the converter. Some VISA drivers work fine either way. -
Driver for PCMCIA-CAN series 2 card needed
Looking for the driver for the PCMCIA-CAN series 2 card.......
Solved!
Go to Solution.Not sure what version is needed, but this may get you started:
http://search.ni.com/nisearch/app/main/p/ap/tech/pg/1/sn/ssnav:sup,catnav:du,n13:hardwareDriver,n8:2...
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Maybe you are looking for
-
Print Preview of smartform with device type EPESCP9
Hi all, I have created a z smartform to print commercial invoice. I am using dot matrix print Epson FX-2170 to print invoice. For this printer the device type is EPESCP9. So I created an output device having device type EPESCP9. I have assigned the r
-
LabVIEW Runtime 7.0 Linux and Mozilla
I have successfuly instaled runtime plugin into Mozilla under linux. I copied plugin into mozilla plugins directory. When I connect to any page with LV Remote Panel, the plugin loads the page, but after 100% it doesn't work. It just display gray rect
-
Creating multi-colored brushes in PSE 8
OK, I am having a really hard time finding information on this...maybe because it can't be done, who knows. Maybe you all do, I hope! I am very interested in using Photoshop brushes. I have PSE 8 and I have a general understanding of brushes...I k
-
Why is my computer automatically filling in with dashes before I can sign in?
My computer is a HP Pavilion A6600F, Windows 7 64 bit, and recently when I turn on the computer it automatically fills in the sign in areas. I have had to hit enter twice before I can sign in. Some times when I want to do a search for something it
-
I have downloaded some easy setups for FCP from the internet. The site said to add it to the folder Macintosh HD > Library > Application Support > Final Cut Pro System Support > Custom Settings I am looking on my computer and I don't seem to have thi