Driver for DVD ROM SD-R1312 Need Help

After moving to another apartment, I've lost my CD Toshiba DVD Driver. Without it I cannot use my DVD anymore. Plz help me. I've searched through the Net and in Toshiba Download Center, but I can't find it.
DVD ROM SD-R1312
Driver can send to:
[email protected]
Thank you very much

Hi,
which Notebook do you own and which system is used?
Normally you don't need an extra DVD driver except DVD RAM is used!
Is there occured any failure with the DVD? Why can't you use it anymore?
Please write down some further informations!
Bye TOK

Similar Messages

  • Driver for DVD rom drive for dv6308nr

    Does anyone know where to find the driver for an HP laptop dv6308nr cd/dvd rom drive?  I looked it up on the site and it isn't listed under the available drivers.  Maybe I am missing it????

    Hi,
    which Notebook do you own and which system is used?
    Normally you don't need an extra DVD driver except DVD RAM is used!
    Is there occured any failure with the DVD? Why can't you use it anymore?
    Please write down some further informations!
    Bye TOK

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • No hard drive or dvd-rom

    Hi Guys,
    I have just had a system built for me , which contains the following
    MSI Neo 965 Mobo
    Intel core duo e6400 conroe 2.13ghx
    320gb SATA hard drive
    1gb DDR2 800mhz Ram
    I have installed my own radeonx1950pro 512mb card and my dvd rom(ide).
    When i first turn my pc on at the diagnostic screen where it shows what is connected (ide primary/master ) it has none , i then get two options f1 to continue and del to enter setup. if i press f1 it goes to a screen where it shows my hard drive and dvd-rom , and ask me to hit a ket to continue , when i do i successfully boot into windows , when  i goto bios and into boot sequence none of my devices are there , any ideas? the only way to load to windows is if i keep hitting f1. Sorry if this sound a newbie question , but my last pc was all ide and i know nothing about SATA. also i added a memory card reader in to the floppy drive space , when i look at my drives my only hard drive has the letter H , and one of my memory card slots has the drive letter C ?????
    Regards
    Lennon

    sounds like you have a windows that was installed for previous system. You just plugged it in and hope everything work just fine. Right?
    On this P965 Neo board, the PATA controller is off to JMicron external controller. So for sure, you need to install the proper driver for this controller. Check on the sticky links on top of this forum table. Get the latest driver and installation instruction there.
    Also, make sure your SATA HDD is pluged to the correct port. Which port you're using?
    In the BIOS, what did you set for the SATA and PATA? Everything has to be setup properly, refer to your motherboard manual on those settings.

  • AIR to use for DVD-ROM application - a question

    For a customer (a sound-enginering in film) I am looking for a solution to produce a DVD-ROM (like the 'old' CD-ROM application) for the presentation (a sort of portfolio) of +/- 400 soundfiles (not music, but real sound).
    In the past the production of CD-ROM application was done using "Macromedia Director".
    Now for the past two weeks I have discovered and studied a little about the "desktop" possibilities of AIR-technology. This has greatly impressed me.
    I would like to use AIR (build with Flex) to produce the whole interface for the DVD: displaying the soudfiles in different way: categories, maybe treemapping, searchable database with SQL-lite etc...
    My question is: has someone experience with the use of AIR for DVD-ROM? Can he/she recommends something? The pros/contras?
    Thank you in advance,
    konrad

    As ab1301 says, you can bundle the AIR runtime on the disc if you sign up for a redistribution license agreement:
    See  http://www.adobe.com/products/air/runtime_distribution1.html.
    However, I believe that still won't get you what you're looking for.
    I assume you want the menu to run directly from the DVD. However, AIR applications must be installed to run -- you can't run them directly from a portable storage like DVD-ROM, USB memory stick, etc.
    So, if you want to have the installer for your AIR application be on a DVD, and have it install the application on the user's computer, you can do that (but you'll probably need the redistribution license and you'll probably also need to write your own custom installer). This thread doesn't provide a complete answer but it does offer some relevent advice:
    http://forums.adobe.com/message/1025293#1025293

  • My iphone 4S wont allow me to restore a bckup of icloud it has just rebooted the os and for over 24 hours i have been trying to fix it i use this phone for my job so i need help

    My iphone 4S wont allow me to restore a bckup of icloud it has just rebooted the os and for over 24 hours i have been trying to fix it i use this phone for my job so i need help. when i try to restore it says "Your iphone could not be activated becuase the activation server is unavailable, If the problom presests goto apple.com/support"   It has done this for 27 hours now PLEASE HELP!!!!!!!!!

    - Connect the iPod to the computer and see if iTunes sees it. If it sees it try to get the photos off the iPod.
    - Next let the battery fully drain. It will likely take days. After charging for at least an hour try again
    - Last, make an appointment at the Genius Bar of an Apple store.

  • Hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????

    hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????

    Didn't work in what way.  Are you unable to start it up?  Does it start but then freezes?  Does the screen stay black when you turn it on?
    Try this - press the home and power buttons and keep pressing them until the apple logo appears.

  • What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved., What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved.

    What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved., What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved.

    Hi Tmswrite,
    Here is what you want to do to protect yourself and your device:
    Find My iPhone Basics  - Apple Support
    iCloud: Find My iPhone overview
    Here's some information on how the Activation Lock protects you:
    Find My iPhone Activation Lock in iOS 7
    Sorry for your troubles. Hope it turns out OK for you!
    GB

  • Equium L10 needs a driver for DVD-RAM drive

    It's rather embarrassing, but in recent days I've come to find that somehow, the driver for my DVD RAM (Mat****a UJ830s) is somehow corrupt or missing.
    I've searched high and low over the net to find the right driver to reinstall, but I can't find a single thing.
    Don't suppose anyone can help?

    Do you mean the simply common driver for the Mat****a UJ830s?
    Usually the windows use the common Microsoft OS driver and usually you will not find an Toshiba driver for this device.
    Ok, on the page you will find an DVD-RAM but its only for the reading and writing of the DVD-RAM medias.
    Caution when using DVD-RAM disks in the DVD MULTI drive Data cannot be written onto a DVD-RAM disk while the function for writing data onto Windows XP standard CD-R/RW disks is enabled.
    A message appears when this function has been enabled so when using a DVD-RAM disk, heed the instruction given in this message by clearing "Enable CD recording on this drive.

  • Cannot load device driver for DVD/CDRW - Satellite 1110

    I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CDs. It is reported as a MAT****A UJDA730 DVD/CDRW but the device status comes up as:
    "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
    I have tried uninstalling and reinstalling the device but the error just returns. I cannot find a driver for it either on the manufacturer's web site or Toshiba's. I don't want to use the Product Recovery CD-ROM as it implies I will lose all software and data on the hard drive.
    Can someone advise how to recover from this situation?
    Thanks

    Hi
    Firstly you dont any driver for the CD/DVD drive. The drive uses the standard Windows OS driver and its not necessary to install it additional.
    I assume there could be something wrong with the registry entry.
    Please check this forum posting:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13843
    The user has used the instruction which was offered on the Microsoft site.
    This should help.
    Please post again if this method was successful.

  • Where can I download Hp DVDRAM GU70N driver for DVD drive?

    I need the following driver but cannot seem to find it.  The HP Assistant does not seem to let one search for drivers just updates.  Please need help.

    CherylG wrote:
    Drivers for CD/DVD drives are normally provided by the OS. Software adds extra functions. What problems are you trying to solve?
    When I load a CD or DVD into the drive teh laptop does not see the DVD or CD so I cannot download data or see a movie. When I run the diagnostic ot tells me that  the HP DVDRAM GU70N SATA CDROM Driver is bad.  It tries to use the data on the recovery disk of the OS but this does not fix the problem.   Hence I think I need a new driver installation file.
    Any sugggestions

  • DVD Studio Pro Newbie Needs Help!

    I have a presentation deadline approaching and I need help desperately. I created my presentation using Keynote 3 (800*600 slides) and exported it to a Quicktime movie using H.264 compression at 29.97 fps (high quality settings). I then proceeded to use iDVD 6 and imported the Quicktime movie and created a simple menu using the templates provided.
    I saved the entire project as a disk image and used the DVD player to check the disk image file. The quality of the DVD disk image file looked nothing like the original Quicktime movie. The images and text looked blurry and unprofessional.
    I've spend quite some time on the iDVD and Keynote discussion forums and can't find a solution to my problem. The conclusion I've come is that the mpeg-2 encoder that iDVD 6 uses is problematic.
    I don't want to start using DVD Studio Pro but I will in order to preserve the quality of my original Keynote presentation. So here are my questions...thank you in advance for your help guys....I really need it:
    - I plan on playing the DVD on a 42" Plasma display at a sales office and also distributing it to potential buyers. Are my Keynote export settings optimal for iDVD use? Should I be using H.264 @ 29.97?
    - If I must use DVDSP then what export/compression settings should I use in Keynote to preserve the quality? Keynote doesn't give me an option to use mpeg-2. I have ffmpegX so I can encode different formats...just need to know the correct one.
    - Keynote exports separate audio and video files. I combined them using Quicktime. Is it possible to use the combined file in DVDSP or do they need to be separate.
    Thanks for taking the time to read this post. Any help would be greatly appreciated. Also, if you have any reading material pertaining to this matter please provide link.
    ~Eddie~
    PowerBook G4   Mac OS X (10.4.5)  

    You can use a mov file that contains both audio and video. DVD Studio Pro will compress the mov itself. I am not overly familiar with the codec H.264 but either way its a codec that compresses the video, and if I am right that codec is used for compressing video to web based file sizes, which means heavy compression. When I create DVD material I use M2V format which is what DVD SP wants anyways so it cuts time and drive space in half. If you export an mov and import it into DVD SP, DVD SP compresses the file again which is M2V. Now you have two files, with twice the compression time. When creating M2V the only thing that you need o be aware of is the bit rate, which needs to be adjusted pending the duration of the video. Use 29.97 if you are NTSC and full frame rate, which you should be.
    If you can not create an M2V file with associated aiff audio file, than export your QT file as uncompressed or as a QT Movie. The file itself will be huge but DVD SP will compress it properly.
    I hope this helps

  • Folders For DVD-ROM Content?

    Hey all - when adding DVD-ROM content, am I limited to dumping all of the files into one directory, or can I use a folder structure? For example, I'd like my DVD-ROM selections to include pictures, mp3's, and wallpapers, with each of those housed in its folder.
    If this is possible, pelase let me know how I can go about doing it. Thanks for your help.

    RiceCooker,
    You state:
    However, when I go back to access the file on the DVD its completely useless.  Its there but will not respond to anything I do to it.
    What exactly have you tried to access the files in the ROM Content? Remember, none of this content will be available from a set-top DVD player.. One can only access from a computer.
    Might be a problem with the folder/files, or with the method used to access them. BTW, what are the file types in that folder?
    Good luck,
    Hunt

  • Hard drive crashed. Recovering photos. Need help

    Hi
    My hard drive crashed and I need help with recovering the photos. The pictures are on my iPad but i could not move them back to the MacBook Pro? is there some way for me to get them beck to the MacBook?

    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
     Cheers, Tom

  • Cant install HP psc 1402 series driver for windows 8...please help!!!!!!!!!

    I recently switched to windows 8...Upto that time everything was working fine...so when i upgraded to win 8 i downloaded the driver files for hp psc 1402 series...but when i start the installation ,the setup starts but it cannot detect my product...so after many attemps it finally detected it...and it installed the following devices-
    1)HP imaging device
    2)HP Printer
    3)Photosmart 1400 (Dotf4Print)
    It couldnt install the main component i.e HP Psc 1400 Series ...I manually tried install it from device manager but it couldnt find the driver
    So i intalled this device from a old xp driver for hp 1400...
    but the problem is that now when i print a document from my pc ...it does not print the tables...
    please help me as soon as possible.. as i need to print an admit card for my interview before 13 of april.
    i dont want to downgrade to win xp..
    Please note that im still using win xp driver for hp psc 1400 series as i coundnt intall the win 8 version.

    Hi AlwinJ,
    Welcome to the HP Forums!
    I understand that you are having trouble installing your PSC 1402 printer.
    I would suggest doing another uninstall. Uninstalling the Printer Software. Then re-install using the HP Printer Install Wizard for Windows.
    Hope this helps, and thank you for posting.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for

  • Issue with JMS sender Communication Channel

    Hi All, We are tying to connect to IBM WebSphere MQ system from SAP PI and pickup messages thru sender JMS adapter. This is WebSphere MQ -> PI -> Proxy Async scenario. We deployed the required sda file in SDM. We could connect to MQ system message qu

  • Inbound Freight payment

    Hi, Will anyone guide me for  Steps to configure inbound freight payment functionality pl.

  • Extracting purchases made from another computer

    My laptop broke and I had quite a few purchases on it. There is no way to recover them from the broken laptop, is there a way to recover them from my purchase history on to my new laptop?

  • Macromedia Dreamweaver 8 issue

    When I try to view a website on Dreamweaver, it shows the "design" but when I click on "code" there is only this <html xmlns:v="urn:schemas-microsoft-com:vml" so the code is not there. When I try to update a CD, I can't even save it because if I do,

  • Splitpane under a glass pane

    I have a lot of components under a transparent glass pane. I dispatch mouse events captured by the topmost glasspane to underling components converting coordinates with SwingUtilities methods. Everything works fine except a splitpane. When a try to r