Driver for Hp Designjet 500 42 not Valid in Win 64

I've downloaded the driver for mi printer hp designjet 500 42 (c7770b) in windows 7 professional 64 bits (with all the software updates for today 2-20-2015). When i double click the exe downloaded from here: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=377948&lang=en&lang=en&cc=us&cc=us
i got the message "It's not a win32 valid app" and it's impossible to install.
This question was solved.
View Solution.

Hi,
Do you got the same error for any of the drivers below?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=377948&swItemId=pl_66260_3&swEnvOid=4063
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=377948&swItemId=pl_56198_2&swEnvOid=4063
If the same happens for both of the drivers above try following these steps, the steps for Windows 7 should be the same as listed for Windows Vista in the article:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00318556&DocLang=en&docLocale=en_US&...
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Print driver for HP Designjet 5500 (Model Q1251A)

Looking for print driver for HP Designjet 5500 (Model Q1251A), non-PS (post script) printer for MacBook Pro, OS X 10.7.5. Current drivers on HP web support does not have driver for the non-PS printer and directs me to Apple's support site, but can't find location to look for a driver.

Hello ..
Try here > OS X: Printer and scanner software available for download

How to add JetDirect (A2591A) to W7 & Driver for Win7/DesignJet 750c+

Here is what I have:
-HP G71 wireless, windows 7 Home, laptop
-Linksys E2000 wireless Router
-HP JetDirect Ex A2591A
-DesignJet 750c Plus Large Format Plotter (Yes, I know it's old, but it's a backup unit until my 1055cm gets fixed).
Problem #1: I cannot find an HP driver for the DesignJet 750c Plus for windows 7, is there one? If so, where?
Problem #2: How to add JetDirect (A2591A) -750c Plus Plotter to my Windows 7 G71 wireless laptop. While using my wireless router and the JetDirect Ex. It is physically hooked up correctly. I belive that I need to be able to find out what is the I.P. address for the JetDirect, but I've been wrong before. Is there a link to show me how to do this somewhere?
Thank You in advance.

For 64 bit systems you can download the XP x64 drivers from here, then unzip the files into a new folder. Next go to the Devices and Printers folder, Add a Printer, select the proper port, then select "Have a Disk" and point to the folder where you unzipped the files.
To find the IP address the easiest way is to print a config page from the printer front panel.
This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Java.lang.NumberFormatException: For input string: "500.01 Not to Exceed"

While running a BI Publisher 11g report i am getting this error
oracle.xdo.XDOException: java.lang.NumberFormatException: For input string: "500.01 Not to Exceed"
Any idea what could it be?
To me it looks like that its related to some datatype mismatch.
For some parameters report runs fine and for some it throws the above error.
Thanks
Ashish

plz post sample for
For some parameters report runs fine and for some it throws the above error.what are you using for
datatype mismatch.?
do you use some format-number or .... ?

Cannot install applications because the certificate for .... is not valid

Hello,
We have an in house enterprise app that can no longer update. We have taken the steps outlined here. These steps include installing a SSL certificate on the server from a trusted CA (GeoTrust) that shows as valid in Safari on OSX. Also the http to https redirect has been setup and verified in Safari and FireFox. Addtionally, the plist file's XML has been manually updated to point HTTPS. New installs work on iOS 7.1 without an issue.
However, the program has automatic updates that fail with the message "Cannot install applications because the certificate for .... is not valid".
The update process works like this:
A Plist file exists on the server that contains the version number of the build on the server. The app will download the file and parse it into a NSDictionary then the verison into an NSString. If the version doesn't match the current version then the user is prompted to install updates.
When the user says yes to the prompt a UIApplication is sent the Open URL message with a hard coded download URL that looks like this:
imts-services//?action=download-manifest&url=http://www.example.com/app/Release.plist
On iOS 7.1 the user will receive the message "Cannot install applications because the certificate for example is not valid". This error occurs even thought the certificate is valid. It almost looks like the URL isn't respecing the redirect from the server.
Has anyone else seen this? Is there a work around for it? Or do I have to redeploy the app (with an HTTPS in the hard coded URL)?

kkoishi, cskimble, OS 7.1 update forced all software installation services to use the HTTPS protocol instead of HTTP. Here is Apache config that adds certificate support and code for changing links in existing *.plist files automatically: http://cases.azoft.com/how-to-fix-certificate-is-not-valid-error-on-ios-7/
More ideas on Stack: http://stackoverflow.com/questions/20276907/enterprise-app-deployment-doesnt-wor k-on-ios-7-1/22527000#22527000

Driver for HP DesignJet 800ps and OSX 10.8?

We have just purchased an iMac with OSX 10.8.2 and have since found that HP do not have a driver for the HP DesignJet 800ps(24in) plotter.
Further, the available generic driver within the OS does not support A1 or A2 paper size. This sort of defeats the purpose of a large format plotter . . . .
We have tried to install HPs OS10.7 driver as well as copying the driver from an older machine to the systems library on the 10.8 machine but each with no success.
Does anyone have any similar experiences, solutions or suggestions.
Thanks

Thanks for suggesting that, PAHU.
We just upgraded my old G5 to a new Intel and so, of course, I found myself hunting for a solution to the lack of DJ800 support.
My 42" DJ800 not only happily accepted the 42" 500 driver, but the driver even recognized and presented for use all of the custom sheet sizes that came from the old computer when I transferred my account info to the new one!
Hoo-HAH!
(Now, if only you could fix the "no-scroll-bar-arrows" thing...! <gr>)

Oversize A2 Paper Size value(string) for HP Designjet 500 Plus 24 (Paper Roll).

Greetings.
I am working at constructor’s bureau. Recently we decided to automate drawing printing from SolidWorks program (it’s a CAD software). I have written a code. SolidWorks API allows to choose for printing such settings as paper tray, scale, color, orientation and paper size. I am having an issue with the last option. Paper size gets set by passing value (string). Here are some of them: http://msdn.microsoft.com/en-us/library/windows/desktop/dd319099(v=vs.85).aspx. I can get the needed value by “Recording macro” and selecting the size I need in SolidWorks
Such paper sizes as A4, ISO A4, Oversize A4 have different numbers. Same goes for A3, A2 and etc. In addition, the values are not universal. They can alter depending on printer.
We have 5 printers for various paper sizes (from A0 to A4) and I set correct value for 4 of them, but I have a trouble with – “HP Designjet 500 Plus 24”. This printer can print both A1 and A2. I managed to make A1 printing work (I just pass value 621 that means “Overize A1”, without changing paper tray), as for A2 the value must be 620 that is "Oversize A2", but it does not work. Only part of the drawing gets printed and it gets placed somewhere in the middle. I guess it just prints according to printer default settings. Maybe the value is not 620? If it is so, can you tell me the real one?
I can try to change default settings to match the A2 printing. However, the printer itself is a network printer. So changing some settings there might get someone in the office angry. So getting the right values is a perfect solution.
I am slowly getting desperate, because all printers work perfectly, except for one. Which makes the code unusable. I can post the code, but it will not help much, because I only need to set one or two values correctly.
One more thing, we are using roll of paper, so maybe I have to also set the paper tray, even if it is still the same as for A1?
Thank you in advance.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here. There are a number of very knowledgable Designjet folks there.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is there a Windows 8 driver for HP DesignJet 750c?

I have an old DesignJet 750c printer/plotter that has been running as a network printer connected via Ethernet. It is running perfectly under Windows 7... I used the XP 64-bit driver with no problem at all. But I cannot load the same XP 64-bit driver under Windows 8 on another system... I get a 'driver not signed' error and the driver will not load. I notice that there are Windows 8 drivers for a host of other old HP printers and plotters, but apparently not for this one.... and yes, I did check 'Windows Update' for additional drivers.
Can I bypass the 'driver not signed' error somehow? Does anyone know of a driver for another piece of equipment that will work with my 750c? What is the solution for this?
--Dave Emery

The Designjet is a commercial product. I am linking you to the Designjet forums repost your question for better coverage.
Designjet Forums

Missing Driver for Epson PictureMate 500

Can someone help me? I've recently crossed over from Windows and while delighted I made the move I still can't print my photos. I've gone onto the EPSON website, downloaded the correct installer (epson11775.dmg) and run it. But when I then connect the printer and run iPhoto it can't find the correct printer driver. I'm looking under EPSON, Epson PM... but "Epson PM 500" isn't there? What am I doing wrong - where can I locate the driver that the installation software installed?

Hi Jamie
It's not often you even need to install a driver for Mac.
Normal procedure is, physically connect the printer to the USB port, switch it on.
Open Printer Setup Utility (found in Applications/Utilities), click Add
You are then shown the Printer already selected, and the driver for it that came with the Mac is automatically loaded. Press OK and you're done.
That's what I would have done first. However to again install the driver, which would be updating the existing one, one just double clicks on the epson28087eu.sit package, which will open and run an installer which will install the driver files to their correct locations. You don't have to manually place them anywhere.
So the question is, can Printer Setup Utility see your printer when you click Add? If not you may have to select from there, in one of the dialogue boxes and select 'USB'.
regards roam

Power View in SharePoint Server - The data extension type for a data source is not valid

Hi All,
All of a sudden I am getting following error when trying to create Power View report using shared report data source (no error testing the connection):
"The current action cannot be completed. The data extension type for a data source
'http://dev/Shared Ducuments/Sales.rsds' is not valid for this operation"
I already have a data source (I had created it after creating my site collection a week ago) and when I use this source to create Power View report then there is no error but I am getting above error when I create another similar data source and use it to create
a Power View report.
Please help me to resolve the error.
Thanks

I am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'

Bluetooth driver for hp pavilion g6 2006tx not working in windows 8.1

Hi Team,
I recently Upgraded my Laptop to windows 8.1.
Before i was using Windows 8, in that i used Bluetooth to send files.
But after upgrading to windows 8.1 Bluetooth is not working at all.
Product name: HP Pavilion g6 2006tx
I updated the latest windows update and in Hp assistant as well.
Kindly fix this issue.
Thank You

HI @msn-r
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that after updating to Windows 8.1, your Bluetooth is not functioning.
Have you ran The HP Support Assistant ?
Have you tried Using Automated Troubleshooting (Windows 8) to overcome this issue?
The wireless button driver affects the Bluetooth on your system. When I checked for an updated Wireless button driver for you unit and Windows8.1, I did not see one listed. I have located one that should be compatible with your notebook and Windows 8.1. Would you please try installing it. sp63752.exe
Here is a link to Using Bluetooth Devices (Windows 8) that may also be useful.
If the issue remains try these steps.
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link".
If you are still unable to pair with a Bluetooth device try the following:.
Step 1. Search for "Change device" in the Windows 8 Start menu.
Step 2. Click on where it says Change device installation settings.
Step 3. Select the No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click Save changes to save the settings you just chose.
As well you can try this.
Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter
Step 2: Now find “Bluetooth Support Service” and double click on it
Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
Step 4. Click on “This Account”
Step 5: Now remove any passwords leave the password field blank
Step 6: Underneath the upper left title should be a hyperlink "Start" Click it
Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HP P1006 driver for windows 7 (32-bit) not working

Hello. I have a problem with my printer P1006. It works fine before with windows vista but when I upgrade it windows 7 professional last month. The printer doesn't work. I tried to download the driver for windows 7 using IE and Firefox. The driver is not working and the ftp server is not serving this file
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-54963-5&lc=en&dlc=en&cc=us&...
I chat with HP customer service several times and they give me the same link and its not working and i didn't get any help at all. They told me to try it the next day and so on.... I've been trying to download since driver was released until today but its still lot working. I don't think there's a problem with my computer (HP dv5-1000us) because i'm using the same laptop on vista and it works before. I also tried to download the file on my desktop still didn't work. I hope somebody could help me fix this issue. Thank you.
Edit by Katie_H (3/30/11): Fixing broken link
This question was solved.
View Solution.

Try this link, it replaces the ftp:// with http://. Some systems have settings that preclude using ftp links.
While calling HP costs $$'s when out of warranty, there are other support methods that are free. For some products support is available by email or chat. And of course there is always this forum, where other users may have an answer.
Edit by Katie_H (3/30/11): Fixing broken link
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Where can I find a driver for HP DesignJet 650C for Mac?

Looking for a Driver for my Mac for this printer!

Hi,
I afraid the printer is incompatible with Yosemite and there are no drivers available for the OS.
You may find any compatible Designjet printer listed below:
https://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=25253&docId=emr_na-c04486562&docLocale=...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Jdbc drive for oracle7.3.4 is not working for me

I try have download the JDBC Driver for Oracle7.3 which is 'jdbc73402-nt.zip'. When I run my testing program, I got this error message 'Exception in thread "main" LinkError: no oci804jdbc in java.library.path'.
I have compared the contents of the two classesXXX.zip files with 'jdbc80406-nt.zip'. There is no diffence between classes102.zip. The creation dates of the files are differnt between the tow classes111.zip. However the number of files and and size of each file in the two classes111.zip files are all the some.
I have also download the JDBC drive for oracle 8.0.5 for my othere pc. I can run my testing program without any problem.
Could you tell me why the jdbc73402 is looking for oci804jdbc not oci73jdbc?
Thank you very much for your help.

Let's get your iPhone back up and running reeset12! My first recommendation is to try a soft reset by holding down the power and home keys. If the device doesn't respond, I recommend connecting it to a computer via the usb cable. If you are unable to get past the logo screen in either case, I recommend a hands on evaluation at a store location.
http://bit.ly/3SdsA
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

8.1 icloud drive for Document and Data is not working well

On my iPad Air 2 and iPhone 6 (both on ios 8.1), every other day my apps would stop syncing with icloud. I noticed this with a few apps such as 1Password and Drafts 4.
icloud for default calenders and reminders were still working during this down time, just the Document and Data not syncing with icloud.
Remedy action:
(1) I need to off icloud drive
(2) press on home bottom and On/off bottom simultaneously to re-start the device
(3) then switch on the icloud drive again to make the Document and Data sync with icloud again.
This is really irritating and how can I think of a PC-less future when icloud is not reliable?
I am supposed to gain synergy for using 2 ios devices but I am certainly not feeling it at the moment.
Please can Apple fix this soon?

Page and Numbers are having the same problem. It gets so irritating that I have turned off the icloud drive for both apps.

Driver for Hp Designjet 500 42 not Valid in Win 64

Similar Messages

Maybe you are looking for