Driver for hp officejet 4620 using OS 10.10

Does HP have a driver to download that is compatable with Mac  OS 10.10 Yosemite.  If so how can I find it.  Thank you.
Gary Marks
[Moderator edited email address]
This question was solved.
View Solution.

Hey Gary,
You may download the driver from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-125737-3&cc=us&dlc=en&lc=en...
Be sure to select the HP Scan option during the installation to get full functionality of the HP software.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Help: I need Windows 8.1 32-bit Driver for my Officejet 4215

    I need driver for my Officejet 4215. I downloaded the HP Printer Install Wizard for Windows - hppiw.exe from http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-4215-All-in-One-Printer-series/351105/model/351107?sku=Q5601A&ssfFlag=true#Z7_3054ICK0KGTE30AQO5O3KA30R1 with the expectation that it will help locate and install the appropriate driver online, but disappointed, as I was redirected to click on "update driver" after locating my printer in the device manager. Cant HP provide a link to the driver as they use to do before? This will save customer from unnecessary hassles. Up till now, the problem has not been solved!

    Due to the age of 4215 you will need to use the built-in driver in Windows 8.1

  • Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code

    unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code.  i don't believe mac allows for input on job code or printer code for permission to print

    I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
    One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
    Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

  • I can't find the driver for my officejet 4500 g510 g-m printer

    Please can someone help me?? I need to download a current version of the driver for my officejet 4500 G510 g-m printer.  It stopped communicating with my Toshiba Laptop C655 S5212.  The disk I have for the printer is too old.  Thanks for any help that anyone can provide!

    Hi,
    Please use the following package:
        http://ftp.hp.com/pub/softlib/software12/COL32438/mp-109547-2/OJ_AIO_4500_G510g-m_Full_Win_WW_140_40...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Firmware for HP OfficeJet 4620 corrupted on support Website?

    Firmware for HP OfficeJet 4620 seems to be corrupt on the HP Support website... Unable to run - getting error message:
    "OJ4620_R1404A.exe is not a valid Win32 Application"
    Where else can I get this file?

    Hi GTC_IT_TECH,
    Welcome to the HP Forums!
    I understand that your having trouble installing the firmware update. 
    What version of Windows are you using? Which Windows operating system am I running?
    In the meantime, I suggest trying this method to install the firmware. Getting the Latest Firmware and Product Updates.
    Hope this helps, and have a good day.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

    I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

    There has never been a reliable firewire ---> USB adapter suitable for external high speed storage.  This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
    The only high speed port on the Air is the ThunderBolt port.  There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options.

  • How to format an external drive for mac AND pc use

    i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
    can i partion one part for ms-dos and part for macos extended?
    cheers
    -j-

    MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
    You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
    Look at this page for more information on a dual partition drive for Mac and Windows.
    http://macosxhints.com/article.php?story=20030613121738812
    iFelix

  • How to partition my drive for  Mac and XP use?  from a novice

    I would like to use my MacBook Pro for both Mac ad PC programs (Office and others) and hear that I can partition the drive.  How is the best way to do that?  Also I have an external Seagate FreeAgent GoFlex external drive to set up that supposedly can back up both Mac and PC without formatting each time.  Do I have to partition the drive first?  Do I use Time Machine?

    Is it your intent to run Windows programs on your computer?  If so then this is more than simply a partitioning exercise.
    In order to use an external drive on both Macs and PCs there are two options.  Option One is to partition and format the drive MBP and FAT32, respectively.  OS X can read/write a FAT32 formatted drive.  However, due to filesystem differences some features of the OS X filesystem are not supported by FAT32, so FAT32 is not the best choice for transferring OS X documents, but would be fine for transferring Windows documents.
    Option Two is to partition the drive using GUID then creating two partitions.  One partition is formatted Mac OS Extended, Journaled and the other partition is formatted FAT32.  Each partition can be used for the data from the appropriate platform.
    TM is not a file transfer program, cannot be used for Windows documents, and does not work on Windows.
    If you wish to run Windows on your Mac then see the following:
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How do I print envelopes on my HP Officejet 4620 using notepad or similar?

    I tried to post my address and receiver address on note pad.  I selected #10 envelope, but the printer said I had the wrong size paper.

    Hi , Thanks for posting in the HP Forums, and welcome! I understand you are having an issue trying to print #10 envelopes on your HP Officejet Pro 4320 e-All-in-One printer. I'd like to help you with this. You can refer to the steps in this document on how to properly load the #10 envelopes in your printer's paper tray:Loading Paper, Cards, and Envelopes for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610, and 4620 e-All-in-One Printer Series Even if you don't have Microsoft Word installed, I recommend following these steps to resolve a Paper Mismatch error on your machine:HP Printers - 'Paper Mismatch' Error When Printing from Word Please respond to let me know if these steps helped to resolve your issue. Have a great day!

  • Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

    Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
    I am getting the message that Windows 7 can't find the driver. I don´t understand why?
    My Windows Update is set  to automatic.
    I see the device under printers. But when I click on it it says driver missing.
    Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website. 
    Can anyone help me, pleease?
    Honza

    I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

  • Software for HP Officejet 4620 with MAC OS X,10.7.5

    Hello
    I want to install HP Officejet 4620 with MAC OS X,10.7.5, but it says there is no software update available. I tried several times with different software direct from HP , but it did not work
    Thanks for sending me the right link :-)
    Best regards HJ

    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107215- 1&cc=us&dlc=en&lc=en&os=219&product=5191646
    Most office jet printers are not very smart, so you may have to run a setup program (included in the download) to "discover" the printer.

  • Error: LabWindow CVI driver for Lab View 2011 (using hp4145a)

    What is the DLL for the Agilent hp4145a instrument driver?
    I am trying to convert the LabWindows/CVI Agilent hp4145 intrument driver for use in labview 2011, but keep getting errors related to an incorrect DLL.

    Hi Courtney L., 
    Your prompt response is much appreciated. Thank you. 
    I have attached the "hp4145 LabVIEW Wrapper Conversion Report" as a txt file
    - this report was automatically downloaded along with the"LabVIEW Instrument Driver Import Wizard (LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers)" *(link listed below), and popped up at the end of the installation.
    If any specific details or a screenshot will also be of benefit to solving this problem, I will be able to post them by tomorrow night.
    *Link for Instrument Driver setup download:
    https://lumen.ni.com/nicif/us/infolvinstdriver/content.xhtml
    Attachments:
    LabVIEW_Wrapper_Conversion_Report.txt ‏6 KB

  • Printer driver for 4500 officejet wireless G510n

    I need to reinstall the 4500 officejet wireless G510n printer driver for Windows 7. I searched for it on HP.com and I received a message that this product is no longer supported. Is the driver still available?

    Hi , Yes, there are still drivers available for the 4500 officejet wireless G510n, and I an help you obtain them. Please download and run the HP Printer Install Wizard for Windows The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer. Please let me know if this resolve the issue. Thanks.

  • Working driver for HP Officejet Pro X476-X576 MFP

    Hi, Is there a working Linux (ubuntu) driver for printer HP Officejet Pro x476/576?The one linux has installed make the printer work slow (2-3 seconds between pages of one document, and between documents) Thanks in advance. 

    Hi Silverbobcats,
    Welcome to the HP Forums.
    I see that you are having an issue with installing the software and drivers for your printer.
    Please click on the following link and run the HP Officejet Pro Software and Driver Removal Utility.
    Once the Removal Utility has finished, reboot the computer.
    Click on the following link for the HP Officejet Pro Full Feature Software and Driver.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Re: Need Driver for HP Officejet J4680 on Windows 7 RC

    My HP J4680c Officejet, all in one will not print with updated ie9.  Can I get a new driver for the printer?
    Thank you,
    Hunter
    {Personal Information Removed}
    Purchased April 10, 2010

    I can't operate my new J4680. need to connect to windows 7

Maybe you are looking for

  • I have an Iphone 5 How do I get videos to my WIndows 7 Pro PC

    I have an Iphone 5 How do I get videos to my WIndows 7 Pro PC.  Only photos move through Icloud to my PC.  Seems  like they are stuck on my iphone. Need help Thanks

  • Relocation error

    Hi, Does anyone know what is the possible cause of the following error when I run the application ? ld.so.1: ftexec: fatal: relocation error: file /MPS/forte3/userapp/funz ioni/cl0/FunzioniMQM.so: symbol MQCONN: referenced symbol not found in the fil

  • Update through native sql

    Dear all, i have written a select query for Update oracle database through Native SQL. Query is W_FLG  = 'Y' UPDATE LPR_LEAVEPLAN_TRN SET FLOWLEVEL = W_FLG WHERE EMP_ID = '11200010'. LPR_LEAVEPLAN_TRN  is my oracle table i want to change the field of

  • Install cannot launch due to previous 'install log file'

    Ive recently purchased CS6  Design standard, after I had some problems with my CS 5 suite. Now when I try and instill it, as the install sequence launches it says that  'Installer failed to initialise'. I've used the Adobe Spport Advisor and it says

  • Yosemite compatability with FCP 7

    Will Final Cut Pro 7 work with Yosemite? How about Premiere CS5.5? I have upgraded operating systems in the past and then lost the ability to use the software that I own... sometimes it is completely unsupported by the new operating system and I have