Driver for infrared control remote on windows 8

Hello, since I upgrade windows 7 to 8 version, my remote control doesn't work.
Thanks your help.

Hello @fparedes,
I understand that since upgrading your computer to Windows 8 your remote for your HP TouchSmart 600-1120 Desktop PC has stopped working. This would be because according to the HP TouchSmart 600-1120 Desktop PC - Software & Drivers page there are no drivers for your computer running Windows 8. This means that there are some functions that will not work and I suspect that if you were to upgrade further you will notice other devices not working as well.
You can try going to the hardware manufacture's website and seeing if they have any drivers that may work for you, but as it stands HP does not have drivers to help you at this time.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

  • Where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011)

    where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011).
    after the installation of windows 7 i cant use my wlan or audio.

    http://www.apple.com/support/bootcamp/

  • Printer driver for HP LaserJet 4L with Windows 7

    I cannot find the printer driver for my LaserJet 4L in Windows 7.  I have a parallel to USB converter cable attached to my computer.   I need the drivers.
    Thanks.
    This question was solved.
    View Solution.

    My Windows 8.1 Pro 64-bit system has a built-in driver for this printer model:
    I don't know whether the driver is present on a fresh Windows install; it may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.
    I'd assume that the same might be true of earlier Windows versions as well.

  • Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

    Hi,
    I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
    I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
    The printer works fine on my other laptop with Vista on it. Help!

    Hi peshi77,
    Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    Once downloaded, please follow the on screen instructions. I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • All driver for Hp Pavilion 15-n213sx windows 7&8.1

    please All driver for Hp Pavilion 15-n213sx windows 7&8.1
    This question was solved.
    View Solution.

    HP is providing a limited number of Windows 7 drivers and the full assortment of Windows 8.1 drivers on the HP Pavilion 15-n213sx Notebook PC Drivers page. 
    Please post (just the text) the Windows Device Manager's "Hardware Ids" for all remaining missing or unknown devices, as shown in the example below;
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Where can I get a bluttooth driver for my ipad minm and windows 7

    Where can I get a bluetooth driver for my ipad mini and windows 7? Windows see and know the device but the ipad doesn't see win7. In troubleshooting, win7 say it doesn't have a driver??

    Mac 101: Printing (OS X Lion)
    Important:
    Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper.  Finally, use the instructions in this article to connect the printer to your Mac.
    The procedures are identical for Mountain Lion.

  • Windows 8.1 64-bit driver for infrared usb adapter

    I'm looking for the correct 64-bit driver on my Windows 8.1 OS for my infrared usb adapter that I'm trying to hotsync
    with my Palm m500. I already have the Palm Desktop software for the 8.1. I just need the correct driver for thr adapter.
    Any help with this will be greatly appreciated. ,Thank you.

    Hello, and Welcome to the HP Support Community!
    I would suggest you try looking at the manufacturer's website for the dongle.
    We have no idea what device you are asking about!
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I recently purchase macbook air with OS 10.10.2. I want to use my Seagate external backup plus hard drive for time machine back up. How to partition my 1TB Seagate back up plus hard drive for use with mac and windows pc?

    Hi All,
    I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.

    I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
    Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now.  In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want.  TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme.

  • I need a driver for my Deskjet 1280 on Windows 7 64Bit

    I am still having a problem finding a driver for my HP Deskjet 1280 Printer Im using Windows 7 64Bit operating system. Can anyone assist please.
    I need it for my new HP Pavilion P6-2021UK computer.
    Rod
    This question was solved.
    View Solution.

    Install the alternate Deskjet 1220 driver available through Windows Update. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • FORMAT HARD DRIVE FOR USE ON MAC AND WINDOWS

    I'm going to start working on scanning a lot of old family photos and getting them put on an external hard drive for my parents.  I'd also like to eventually put old VHS family home movies on the hard drive as well.  However, I'm not sure what to do about the hard drive.  I know if I format it to be compatible with my Mac it probably won't be compatible with their PC.  I read about the FAT32 option but I saw something about a file not working if it's over 4 GB in size.  I'm thinking maybe some of those home movies will be larger than 4GB.  I also saw an exFAT option.  If I go with that will I be able to scan the photos on my Mac, get the home videos converted and put it all on the hard drive will all of it be visible and usable on their Windows PC?
    Thanks for your help!

    matahari_1946,
    if you’re not yet backing up your Mac’s internal hard disk, I’d recommend first that you purchase an external hard drive for yourself for exclusive use as a Time Machine backup destination; that way, in case of a disk problem, you won’t permanently lose all of your scanned photos and imported movies.
    A 4 GB file limit does apply to FAT32 filesystems. If their version of Windows allows, the external disk which will hold those photos and videos should be formatted as NTFS from their PC, so that they can watch video files over 4 GB. (It’s unlikely that an individual photo file would be over 4 GB.) However, OS X doesn’t come out of the box with NTFS support. The exFAT filesystem is able to hold files over 4 GB, and it is supported by Mac OS X 10.6.5 and newer, but it’s optimized for flash drives; it’s more “fragile” on hard disks than other filesystems are. As a workaround, you could format a flash drive to have exFAT, copy videos over 4 GB onto the flash drive, and then use your parents’ PC to copy the videos from the flash drive to their NTFS external disk. Other alternatives would be to look for third-party software for OS X which supports reading from and writing to NTFS disks, or third-party software for Windows which supports reading from and writing to journaled HFS+ (the default OS X filesystem) disks.

  • How can I use single hard drive for both Mac OS and Windows without changing the formats and reformatting?

    I have a windows PC and a Macbook Air and a 1TB external hard drive. They said in order to transfer large files into the hard drive you have to change the format of your hard drive (which would be from MS-DOS to Mac Os extended) so how can I use my external hard drive on my windows PC without reformatting its files? Please heeeelp 

    Natively Windows can read and write to NTFS, FAT32, and exFAT while the Mac can read and write to FAT32, exFAT, and MacOS Extended.
    Option 1: You can purchase driver software for Windows to allow it to read and write Mac's MacOS Extended or you can purchase a driver to allow the Mac to read and write to NTFS.
    Option 2: you can format the hard drive for exFAT and use it with both Windows and the Mac without purchasing any special drivers. (Obviously the 4GB file size limit is why you don't want to use FAT32)

  • Using external hard drive for itunes from mac to windows

    Hello, I have an external hard drive for my itunes music connected to a G4. I just bought a laptop (windows) and would like to connect the external drive to it so it will read my music from the external hard drive. How can i do that?
    Thanks,
    M

    You will lose all data when you reformat so you must copy it elsewhere temporarily, as for the format go to: Applications>Utilities>Disk Utility>Erase, in the format dropdown select MSDOS (FAT) and in the name dropdown, type a name.
    Copy your data back to it and it will be accessible to windows and osx

  • Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

    Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
    I am getting the message that Windows 7 can't find the driver. I don´t understand why?
    My Windows Update is set  to automatic.
    I see the device under printers. But when I click on it it says driver missing.
    Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website. 
    Can anyone help me, pleease?
    Honza

    I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

  • Driver for intel cs330 webcam on windows 7

    HI I have a great old webcam a Intel CS330, but i have just bought a new computer and its runing windows 7 and i cant seem to find a driver for it :( Could you please tell me where i may get this from if it is avalible or if it will be anytime soon.
    Thank You

    I was having this same issue and found a solution. I was thrilled when I upgraded to 7, until I found out that MANY drivers and applications are just not compatible. BUT....here's the loophole: you can set the program to run in Windows Vista compatibility
    mode and it WILL work. To do this: 1) Download the driver utility (CS330.exe in this case) to your desktop. Note: I used the CS330 driver for Windows XP and am running 64 bit Windows 7 on my computer. 2) Right click on the icon and select "Restore Previous
    Versions" 3) Select the "Compatibility" tab. 4) Check the box for "Compatibility Mode" and select "Windows Vista (Service pack 2) from the drop-down menu. 5) Click "Apply" and then "Ok" 6) Reboot your computer
    and click on the icon to install. Follow instructions given on the screen. Hope this helps!
    I tried this, doesn't want to find the driver in the c:/temp/cs330-xp dir

  • JDBC driver for SQL Server 2000 with windows authentication

    Does anyone know of a JDBC driver for SQL Server 2000 that supports Windows Authentication, that is that a username and password does not need to be supplied when connecting to the database.

    You can use the JDBC-ODBC-Bridge.
    ODBC provides windows-authentication.
    Hope it helps.
    Freddy

Maybe you are looking for