Driver for N560GTX-448 Twin Frozr III Power Edition/OC -l- split

I bought the card about four weeks ago and just now I had the opportunity to test it.
When I installed the video card in my PC, the device manager appears only a standard VGA video card. When I installed the driver, Device Manager showed a yellow exclamation on Nvidia's GeForce GTX 560 Ti saying "Windows has stopped this device becouse encounter some problems (error 43). I tried running some games but I could not open them, and with some drivers the screen was filled with artifacts
I tried various drivers on my two PCs, from one that comes with the video card to the 295.73 driver, and each time the same warning on device manager. Can anyone help solve this or may I do a RMA to MSI?
My systems:
AMD A3500
Gigabyte A75M-D2H
4Gb RAM Kingston DDR3
SevenTeam 550W.
Intel Core2Quad 9400
Gigabyte EP43-DS3L
8Gb RAM Corsair
SevenTeam 750W
Thank you.

Quote from: Bernhard on 20-March-12, 00:42:10
You sure your PSU has enough amps on the 12V rail and you connected the PCIE power connectors properly ?
Have you checked your Motherboard's BIOS revisions for updates regarding the later video cards ?
Your PCIE Bus interface should be 2.0 X 16. Have you reseated the card properly and disabled the on board graphics in your BIOS ?
My PSU is a SevenTeam 750ZAF with 750W. I used it to do SLI of my 9800GTX+ in the other computer and never had problems with it. I doubt that this could be my problem.
The GA-EP43-DS3L already has the ultimate BIOS and I did the update on the GA-A75M-D2H BIOS. Nothing new, the problem persist.
Anyone of my boards does not support PCI-Express 2.0 but this is not a requisites for work of the video board like said the MSI page:
http://www.msi.com/product/vga/N560GTX-448-Twin-Frozr-III-Power-Edition-OC.html#?div=Feature
"PCI Express 2.0 doubles the bandwidth of previous generations of PCI express up to an astonishing 16Gb/s. This maximizes the performance of current graphics cards in today's most demanding games and applications. PCI Express 2.0 products are fully compatible with mainboards with other versions of PCI Express."

Similar Messages

Driver for N560GTX-448 Twin Frozr III Power Edition/OC

So... where is it?
I've just bought one for a new build (my Chrsitmas present to myself) and I'm trying to check for the latest drivers.
There's nothing available to download on MSI's site for the card, and nVidia says that the hardware is not supported! I've tried their 'detect my hardware' and downloaded the latest GeForce driver. My card is detected as a 560 Ti but both complain that it is not supported.
Please help...

I've updated my system specs - the old ones made me realise how long it is since I first joined here.
The BSOD happened during me not even being there... I had installed the driver (seemed OK), done some windows updates that needed a restart, then left the PC while I went for a brew. When I came back the BSOD was waiting for me. I didn't read past the 'If this is the first time..' and just hit the reset button in disgust.
If it does it again I'll try to analyse the dump and see what went belly-up.
Seems OK so far though, it's been on all evening since then, including playing unreal tournament 3 for a while and running a few VM's in VMware.
So far the only thing to cause my CPU fans to speed up noticably was doing the windows updates!
I have to say I'm impressed with the graphics cards capabilities so far. But then I've upgraded from an MSI NX8600 (and a 7900 running my second monitor) so there should be a slight improvement...

N560GTX-448 Twin Frozr III Power Edition/OC in SLi

Hi guys,
I've just bought 2 560GTX-448s to run in SLi, but I'm not seeing any benefit from the 2nd card when i run them in SLi...
I installed one, and when it was up and running ok, I installed the 2nd card. The nvidia panel shows the cards in SLi, but I don't see any difference in 3D mark 2006, or in COD Black Ops. (EDIT) I have the driver set to 'single display performance mode'
I'm running them in an ASUS X58 Sabretooth, with an i7 970 which is currently running at 3.3Ghz and 12Gb of C9 memory thats currently running at 1Ghz
Please help

Quote
So how come there's no difference in 3Dmark06 or Black Ops? seems a bit wierd to me. Made me think something was bottlenecking the cards...
nope, most probably don't have good SLI support, or wrong SLI mode is used in those applications,
you can try force Alternate Frame Rendering 2 for SLI mode within Nvidia CP then to retest.

Two displays for MSI R6950 Twin Frozr III Power Edition/OC graphics card ?

Is it possible to have two displays simultaneously connected to this graphics card:
http://www.msi.com/product/vga/R6950-Twin-Frozr-III-Power-Edition-OC.html#?div=Overview
The card has two DVI-outputs "DVI Output: 2 (Single-Link DVI-D x1, Dual-Link DVI-I x1)". I can use one display at a time and the second display only shows "No signal" error. I would like to use two displays when playing PC games, is it possible with this craphics card? Both my displays have VGA connector cables, and they are connected to the card with an VGA/DVI adapter.

Quote from: Svet on 19-January-12, 22:12:52
what monitors you are using and what resolutions you're trying to use?
Both monitors are old models: 1) Panasonic PanaFlat PF90 2) acer AL 707.
I'm not sure what resolution I was using on acer when I tried to connect both monitors, but now I'm using PanaFLat with 1280 x 1024. Maybe I should try to set them both on 1024 x 768 and try again.

N570GTX Twin Frozr III Power Edition/OC ----- No Boot / Blue Screen

Hello all,
  I recently purchase a brand new N570GTX Twin Frozr III Power Edition/OC. Previous to installing the card I had a gt250 with the latest Nvidia drivers installed (285.62). I installed the n570 and booted up no problems. I was able to see the new card installed in device manager and also confirmed it in afterburner. However, I wasn't able to set or view the voltage settings even after enabling in preferences and restarting afterburner. Although, the remaining settings / stats seemed to work fine. I was also able to do a full kombuster (ultra settings) benchmark with no problems, receiving a decent score and topping out temps in the high 50's I think. I also played a few games and turned up settings with no trouble.
  When I rebooted my machine as the windows load screen popped up I got a BSOD and an error referencing nvlddmkm.sys. All reboots there after either failed to the same BSOD error or rebooted the machine. Booting into safe mode had no problem as did booting into normal mode if I uninstalled all nvidia drivers first. As long as I boot into safe mode or there's no drivers installed it doesn't fail.
  I've tried every version of the nvidia drivers I can find. 286.62, the newest 290 beta drivers, the 266 versions that came on the cd and multiple 270's version that were noted the most stable in internet forums...all produce the same results. I then updated the bios on my motherboard to the latest. I also reinstalled a fresh copy of win7 x64, and ran all system updates include service pack 1. I did all those updates with my 250 installed. After I had a solid system I put in the n570 and rebooted. I again had a perfect boot and was able to access the card (not the voltage via afterburned or any info via live update 5). I was able to run benchmarks etc once again. Upon a reboot, it failed back to the BSOD again. I repeated the multiple driver tests, all failed the same.
  If anyone could suggest something other than RMA I would be happy to give something else a try. It seems silly to RMA a card that works so well on first boot until I reboot windows. But I'm out of ideas...
System specs:
N570GTX Twin Frozr III Power Edition/OC
Intel Core i7 950
6gigs Ram
730 watt power supply (w/ dual pci-e power connectors)
Gigabyte x58a-ud3r rev2 (newest bios - standard clock speeds - default voltage settings for pcie)
Win7 x64 Service pack 1 (all windows updates)
Thanks for any help.

Also, if it helps to note, on the initial install (both times) the card was stable for hours until I shut down and rebooted. If it were a power issue wouldn't it be unlikely to be stable for such a long time (even during stress tests) and then not even be able to load windows correct after a reset? Seems like a driver issue to me, however as I've said I've tried them ALL haha.
Thanks for the help

N570GTX Twin Frozr III Power Edition/OC

Hello,
I have exactly the same issues like the OP.
I bought my video card (N570GTX Twin Frozr III Power Edition/OC) 3 days ago and my video card is showing exactly the same symptoms as described by the OP.
I was able to play 2 evenings after hours of problems where my computer system was showing the same artifacts immediately after turning it on. When the system succeeded to boot to Windows the nvidia driver kept crashing over and over again if I did not receive blue screens.
Surprisingly after booting again and again and again and... the system was eventually stable to play 2 hours. After shutting down and turning the computer on again the same problems reoccur.
I did not RMA the card so far because I was trying to isolate the conditions where the card is running stable. I was not successful so far.
My nvidia 8800 GTX works like a charm. All, and I really would like to point that out, all other components are 6 weeks old! Last component I exchanged because of the graphics issues was the PSU. After exchanging the PSU the problem was gone for 15 mins.
@RelevantToSome: Looks like I am using the same memory like you... Compatibility issue?

Quote from: Bernhard on 06-October-12, 05:51:32
Test your 570 in another know working system with a similar GPU.
Are you talking about a similar CPU or GPU?
Of course, both is not available!
Quote from: Bernhard on 06-October-12, 05:51:32
My initial suspicion is a PSU or the card itself.
Quote from: Bernhard on 06-October-12, 05:51:32
Yes, on paper the PSU should be OK, but it may not have the available amps as claimed, i.e. could be defective.
At least it has enough amps to run the card and while measuring power consumption my whole system sucks 392 watts, ~140 watts less than the PSU manufacturer claims for the 12V rail alone. And the PSU does not really seem defective because when the system manages to boot up it runs without problems hours and I would expect the system would run under full pressure even 24 hours.
Quote from: Bernhard on 06-October-12, 05:51:32
If the card works on another system, then test your PSU on the other system.
I have no other system available to disassemble completely. I have 2 PSUs here. Both show the same symptoms...
I purchased this PSU because I also thought my PSU might be defective...
Quote from: Bernhard on 06-October-12, 05:51:32
We can't support your MB, but your BIOS may need an update. Check the MB manufaturers BIOS release notes.
Just for interest, what is the relation between BIOS update and a card showing artifacts immediately after turning the computer on?
Ofc I will flash my BIOS just to sort that out...

NGTX570 Twin Frozr iii Power Edition/OC freezing problem

Hello,
I have problem with my card. In some games at total random time my screen freeze and I get some little white "bolts" all over my screen, display driver stop working and i must do ctrl+alt+del to exit that process or sometimes i cannot do anything and i must restart PC on button. Look at picture which are posted and u will see whats happen. I have installed latest drivers, but i still have that problem.
I never clocked graphic card, its on default settings.
I bought this card 27.12.2011 and have this problem from the start.
My config is:
CPU AMD Phenom 2 X4 965
Motherboard M4A87TD
NGTX570 Twin Frozr iii Power Edition/OC
Kingston DDR3 12GB
Chieftec 650W
Regards,
Veljko

I didn't pay attention because it doesn't often happen. I still have guarantee - for 2 years, but the problem is that if i send my card back they will check the card and the problem may not happen and they will send me my card back. I have mentioned before that the problem occurs at random time.
One thing more, when I test the card in hard tests like Furmark and Kombustor that problem never happens. It occurs in video games which are not very demanding. I would ask you if it is usual that the temperature is always over 70 degrees in every game (even over 80 when playing new demanding games). I ask you that because i have read on various forums that the temperature doesn't increases that much.
Thanks

Does N570GTX Twin Frozr III Power Edition/OC have OCP?

Hello,
(1.) does the MSI's N570GTX Twin Frozr III Power Edition/OC VGA have OCP, since it utilizes custom PCB and, compared to reference, has more VRMs?
Any URIs would be appreciated.
Thank you very much.
EDIT:
Hi again,
I wish to add two subquestions:
2. Does OCP (for the GTX500 series, in general) affect Kombustor, given the fact that it's based on FurMark?
3. Does "Xtreme burn-in mode" in Kombustor and FurMark bypass the OCP?
Thank you.

Quote from: Svet on 16-March-12, 18:35:01
Yes, all cards have such
If its Disabled it will effect anywhere
No
Excuse me, Sir, I do not understand what you mean by "If its Disabled it will effect anywhere".
My understanding is that OCP used to throttle down heat generation and performance of OCCT, FurMark, and the like, but ever since ForceWare 267, it applies to every application. What do you mean by "Disabled"; did you mean enabled? I apologize for my confusion, Sir.
I remember that GPU-Z had a mode to disable the OCP (/GTX580OCP), then the newer ForceWare denied the disable, possibly thereafter TPU countered and reworked their mod to bypass the OCP again (/GTX500OCP); judging from the previous sentence, it should be possible to disable the OCP throttling via a software tweak (not just hard-modding the PCB), and I wondered whether Kombustor/FurMark implemented this software-based solution into the "Xtreme burn-in mode", since, for example, Kombustor displays the "Unlocking power draw will increase graphics card workload." warning when one selects the "Xtreme burn-in mode". The bottom line is that I only want to learn what "Xtreme burn-in mode" is really all about, could you, please, explain its concept to me?
P. S.: I do not challenge you; I'm only trying to learn. Thank you for your help; I truly appreciate all the time and effort you vest into these forums; you're a star!

MSI N570GTX Twin Frozr III Power Edition/OC memory clock?

I have had an MSI N570GTX Twin Frozr III Power Edition/OC for about 6 months now and have used MSI Afterburner to monitor temps etc. Today I used it to lower my overclocking as others had said Ghost Recon Future Soldier doesn't crash if you take it off.
If you look at the MSI product page for the card (the forum won't let me post a link to it!?) you can see the Memory Clock Speed(MHz) says 4000 yet in Afterburner mine said 2000Mhz and the slider was in the middle. I am pretty sure there is no multiplier at work here so mine wasn't being overclocked?
Any ideas? I have reduced it down to 1800Mhz and GRFS doesn't crash anymore but can I take it up to 4000Mhz safely in future? I do not want to overload the card.

you have multiply the memory value x2 to get the effective speed

GTX 570 Twin Frozr III POWER Edition

Hey guys,
i just got the GTX 570 Twin Frozr III POWER Edition and i love the card but it seems to run quite loud at fan speed above 48% so i made a custom fan control in afterburner
and the card runs at 71C - 75C under full load in games(crysis2, witcher 2), are those temperatures too high? if not what is the max safe temp i should be running at?
thank you =]

Quote from: Henry on 31-July-11, 05:13:04
Those temps are normal under a heavy load, nothing at all to worry about.
some people said i can lower the fan speed and just let the card run at 80C, so my last question is:
Is 80C under load an acceptable temperature to run this card at for let's say 4 non-stop gaming hours a day?
and thanks for reply ^^

MSI GTX 570 Twin Frozr III POWER Edition OC - Dual monitors IDLE higher temp

I have MSI GTX 570 Twin Frozr III POWER Edition OC, when I attached second monitor to this card temperature in IDLE mode on this card goes higher from ~38C with one monitor to around ~45-6C with second.
Card with attached two monitors do not goes in 2D mode, I readed its a nvidia bug and I should upgdate my BIOS.
In desktop IDLE mode card with attached one monitor
http://img401.imageshack.us/img401/3726/19936167.gif
In desktop IDLE mode card with attached two monitors
http://img851.imageshack.us/img851/1857/27227099.gif
My BIOS version 70.10.27.00.01
Is it available any newer bios for this card ?

Quote from: PeterMac on 10-May-12, 01:13:08
From 50MHz on GPU at idle desktop with single monitor to 770MHz!! with two monitors for what ?
to support the second monitor it seems.
read the link
http://nvidia.custhelp.com/app/answers/detail/a_id/2483

570 twin frozr III power edition oc unstable

Hi,just finished building my new rig (i52500k,p8z68-v-pro gen3 and msi N570GTX Twin Frozr III power edition OC)but my card appears to be unstable out of the box,crashing straight away on 3d mark,i'm getting display driver stopped responding error.
I've done a clean install of drivers etc,and only when i use afterburner to up the core voltage by 25mV does the card become stable.(have not tried less voltage)
Why isnt it working at stock voltage ?
I even tried bf3 using the card at fully stock settings,and it crashed minutes into the game

Sounds like the same problem i was having https://forum-en.msi.com/index.php?topic=155348.0
Most games would crash 10-30 seconds into the game, battlefield 3 lasted about 2-3 minutes before crashing and restarting.
Now i have a decent power supply unit no more crashing just hours of fun gaming

R6950 Twin Frozr III Power Edition/OC goes to full power when in idle

My R6950 Twin Frozr III Power Edition/OC acts normally, when i use the PC. When it goes to idle, the card heats up and turns the speed to 100%. When i remove the drivers there's no problem. I've tried with the different drivers there and on the AMD page.

Quote from: Svet on 12-May-12, 02:39:19
install msi vga drivers, then see how it goes
I've already tried those :(

MOVED: Can I unlock 6950 Twin Frozr III Power Edition to 6970 shaders?

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=148995.0

Quote from: v1p3r on 25-May-11, 09:02:27
Hi,
I have purchased the MSI 6950 Twin Frozr III Power Edition.
I was wondering if it can be unlocked to the 6970 shaders? Thanks.
OK, HERE IS THE SKIVY, THE MSI R6950 TWIN FROZER 3 PE OC 2GIG, DOES UNLOCK, I FLASHED THE CARD WITH SUPPLIED BIOS FROM MSI, R6950PEX.BIN IT UNLOCKS ALL, VOLTAGE CORE, OVERCLOCK, ETC. I DID NOT SEE ANY CHANGE HOWEVER IN THE SHADERS, MY GPU-Z IS THE UP TO DATE VERSION. SO NOT SURE IF THEY UNLOCK OR NOT. I ALSO PURPOSELY FLASHED A 6970 BIOS, ON THE CARD AS WELL // CRASHED IT. FLICKED THE **BIOS SWITCH** & BOOM IT BOOTS UP NO PROBLEM, IN WINDOWS, RUNNING, I SWITCHED IT BACK, & REFLASHED THE ORIGINAL BIOS OVER THE 6970 BIOS.....SO FAR EVERYTHING WORKS AWESOME // GREAT DESIGN HERE....THIS IS MY FIRST RADEON BASED CARD IN LIKE 15 YEARS // GONNA PLAY SOME MORE & I WILL REPOST WHEN I FIGURE OUT THE SHADERS.........MrStude2r5

Can I unlock 6950 Twin Frozr III Power Edition to 6970 shaders?

Hi,
I have purchased the MSI 6950 Twin Frozr III Power Edition.
I was wondering if it can be unlocked to the 6970 shaders? Thanks.

Quote from: v1p3r on 25-May-11, 09:02:27
Hi,
I have purchased the MSI 6950 Twin Frozr III Power Edition.
I was wondering if it can be unlocked to the 6970 shaders? Thanks.
OK, HERE IS THE SKIVY, THE MSI R6950 TWIN FROZER 3 PE OC 2GIG, DOES UNLOCK, I FLASHED THE CARD WITH SUPPLIED BIOS FROM MSI, R6950PEX.BIN IT UNLOCKS ALL, VOLTAGE CORE, OVERCLOCK, ETC. I DID NOT SEE ANY CHANGE HOWEVER IN THE SHADERS, MY GPU-Z IS THE UP TO DATE VERSION. SO NOT SURE IF THEY UNLOCK OR NOT. I ALSO PURPOSELY FLASHED A 6970 BIOS, ON THE CARD AS WELL // CRASHED IT. FLICKED THE **BIOS SWITCH** & BOOM IT BOOTS UP NO PROBLEM, IN WINDOWS, RUNNING, I SWITCHED IT BACK, & REFLASHED THE ORIGINAL BIOS OVER THE 6970 BIOS.....SO FAR EVERYTHING WORKS AWESOME // GREAT DESIGN HERE....THIS IS MY FIRST RADEON BASED CARD IN LIKE 15 YEARS // GONNA PLAY SOME MORE & I WILL REPOST WHEN I FIGURE OUT THE SHADERS.........MrStude2r5

Driver for N560GTX-448 Twin Frozr III Power Edition/OC -l- split

Similar Messages

Maybe you are looking for