Driver for Network controller

I atache a picture with id hardware network controller

Hi Emillio
Install:
Win7 and Server 2008 R2 Auto Installation Program
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...

Similar Messages

No driver detected for network controller for - Pavilion dv6-6188ca

I had to reinstall windows 7 pro OS as my notebook I it was not able to boot up. I did not use recovery CDs. I used windows 7 pro install CD and with a valid product key, Now everything works except for wireless LAN.
Under device manager I have yellow mark for network controller and says driver not found. I tried all drivers listed for this model from HP support site but without any luck. (there are 8 network driver listed for this model on HP support site) Moreover there is no specific driver listed as "Network controller" on HP site. My notebook uses Broadcom 4313 802.11b/g/n Wi-Fi and 2070 Blutooth 2.1 adaptor (combined). Bluethooth is working fine as it is able to see other blutooth devices in the vicinity.
How I can I fix this? Where can I find the driver for the network controller for this device? Any help would be highly appreciated. I havn't tried to connect through LAN and let windows look for appropriate driver for this notebook.
This question was solved.
View Solution.

Hi:
This Broadcom wireless driver should work for you...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en

Driver needed for Network controller,PCI Device,SM Bus controller

Need helpt to get the drivers for win 7 64 bit for Network controller, PCI Device,SM Bus controller, Universal Serial Bus controller, PCI Encryption/Decryption controller

Hi: For the smbus and usb 3 controllers, download and install the amd chipset drivers and reboot. http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 PCI device: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en&os=4063&product=7174407&sw_lang= PCI Encryption/Decryption controller: Download and run this driver. Then you have to manually install it. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1 To manually install the driver, go to the device manager, click on the PCI E/D Controller needing the driver. Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install. Then reboot. Network controller...need the hardware ID for that because I don't know what model wireless card your model has. Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category. The network controller device will have a little ! mark next to it. So, find the network controller device, click on that and then click on the Details tab. Now you see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the third item (Hardware ID's). Post the top string of characters you see in the window.

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.

Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Driver for network adapter

Hi, I have a hp pavillion g series laptop which will no longer connect to the Internet. I have tried doing a recovery but this seems to only work now and again (gets less successful the more I do it).
When I click on the Internet symbol it tells me Internet explorer cannot display web page.
I click on diagnose problem and it tells me to install a driver for network adapter.
Whatever I try seems to be failing.
Any help would be great.
Thanks

Reinstalling Drivers/Software:
Windows 7
Windows 8
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Qosmio F30: Need 64bit driver for RAID controller

Can anyone help me???
Please!
I have Qosmio F-30.
Where can i find 64-bit driver for raid controller?
Is it exists somewhere?
Please, help me!!!

Unfortunately, the XP 64bit drivers are very rare and on the Toshiba driver page you will not find any.
Possibly because Toshiba does not deliverer any notebooks with OS XP 64bit.
See only one way to find one; google for 64 bit DAID driver and maybe you are successful
Good luck

X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64

Hello,
After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
How can I proceed?
Thank you in advance
Solved!
Go to Solution.

I fixed it by downloading this drivers:
https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
And after installing them and restarting, searching for them manually from the Device Manager.
Cheers

Windows driver for "Multimedia Controller" and sound problem

Hi
I installed Windows 8.1 using Bootcamp on my Macbook Air (Early 2014, Intel i5).
Then I downloaded Bootcamp drivers from http://support.apple.com/kb/dl1720 and installed couple of them (wifi, intel chipset).
When I check the Device Managmer I still get "Multimedia Controller" in "Other devices" without drivers.
Beside that I think the sound is not working. I installed the Realtek sound driver. When I play sound file the volume bar in taskbar mixer is blinking but no sound is coming out : ).
Please help.

for multimedia controller if its onboard sound card use this drivers:
http://download.nvidia.com/Windows/nForce/4.62/4.62_nforce_audio_winxp2k_international_whql.exe
but based on both:
multimedia controller
multimedia video controller
think its external PCI device like TV tuner.
get this one to ID the device: http://www.zhangduo.com/UnknownDeviceIdentifier.exe

Problems with driver for network after installing windows.

Hi. I have recently installed Windows 7 on my mac pro (from ultimo 2012). I've used boot camp for the installation. However it did not install the driver for my network. How can I get the driver??
I hope there are someone who can help me.

Hello Becky,
I performed all the windows xp updates when I installed xp.
Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
Thanks for your help,
Sergio
Attachments:
Serg_usf_Screen_Shot.doc ‏550 KB

Driver for Network Card

Hi: I put a hard drive from a working R50 loaded with
XP and other software into my T42 and of course
XP notices there is a network card it doesn't have a
driver for; It's got the driver from the R50 it used to
live in. Which driver(s) do I need? Thanks

Your T42 only has two network adapters, one for Ethernet, the Intel Pro 100/1000 you say is installed, and the second one is for your wireless, the Intel 2200bg with the latest driver here.
But you are much better off downloading the Thinkvantage System Update (TVSU) from here and then letting TVSU update all your drivers to the current level.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Missing Driver For Video Controller

my laptop's model no. is toshiba satellite pro l510. I have windows 7 installed in my laptop . my videos on my laptop was working fine till yesterday but sudeenly my vlc crashed and other video players were also crashing so i tried to update the display driver but couldn't so i unistalled it . But now i'm trying to reinstall it but the driver is not installing . also in the device manager i am unable to find the display adapter icon. and i'm getting a yellow colour icon in my other devices option in the device manager saying video controller (vga compatible)when i'm double clicking it , it says "The drivers for this device are not installed. (Code 28)Data error (cyclic redundancy check).
To find a driver for this device, click Update Driver" i'm not able to find the right drivers for my laptop . alll the drivers i've downloaded are not installing or hasn't heldped. plzz help..

The CRC mismatch error means a system file or a registry entry doesnt match what windows or the driver is expecting. In some cases a simple chkdsk or a registry cleaner will solve the problem and in some cases a full restore is needed. Click the start button.Right click my computer.Select Properties -> Tools -> Check Now -> Start -> Schedule Disk Check -> Next Boot -> Restart PC I would also advise running a registry cleaner like ccleaner to check for errors.http://www.piriform.com/ccleaner Regsitry Tab -> Scan For Issues -> Wait until done -> Fix Selected Issues. While you are in there you should go ahead and run the regular cleaner to, but thats up to you.Cleaner -> Run Cleaner

Equium P200-1ED - Startup Driver for SD controller

I want to install Windows on as 64gb SD card.
I have tried using a USB adapter and through an express card adapter.
Is there startup driver to install at installation time for windows XP or windows 7
Or is there a BIOS update that can support it?

Why don't my posts appear here?
I thought I had already posted a response to this reply.
First of all it is a P200-1ED. Sorry.
Thanks for the response anyway. However:
1) As I said, I am not using the SD card port.
2) I am using the expresscard port with an adapter and the system sees it as a USB drive.
3) According to Windows Setup it needs a start-up controller/driver like SCSI controlled hard disks. With XP, you can install that before Windows is loaded.
4) It is even more straight forward with Windows 7 as everything is done through Windows and all the drives are accessible including SD through a USB &/or ExpressCard port. It asks for a driver.
5) Windows XP also asks for a controller
6) I have seen it on Sony & HP LapTops and apparently there are third party drivers that I thought might be used to do this.
7) Using SD cards as alternative to SSD is a well known practice, specially with LapTops
8) The system sees a USB drive at boot time, so I don't see why it shouldn't see the a SD drive seen as USB by the system. I don't think a BIOS is the only way although that would be preferable. I thought there must be a way of configuring the connection. This is what Windows i.e. a third part or Toshiba software to do that.
9) There are programs like Plop that can be used to run from the card but I still need to install the Windows files on it. I could install on a normal USB and then make ISO image of it and copy it to the SD card and then use a boot menu or the hard disk to load the OS from the SD card but I am not sure if that would work and it would be complicated to get the drives correct.
10) I don't understand why it doesn't see it as USB device which is what windows sees it as, not even when I use a USB adapter directly plugged into the USB port but it sees a normal USB Flash drive at boot time!!
I haven't done this sort of thing for years so I thought some one more into this sort of thing may know.
Message was edited by: JakeEquium

I am looking for network controller driver

I have Satellite M70 notebook. Help me please!

Hello
All you need you can find on Toshiba download page under http://eu.computers.toshiba-europe.com Support & Downloads. Please check exact notebook model to be sure you will download right drivers (PSM70 or PSM71).
Bye

Vista 64bit can't find driver for networked Laserjet 3390.

I originally posted the following in the wrong section so I posted a retraction there and am reposting in this networking section. ===== I have an all-in-one Laserjet 3390 printer. It's connected to my WinXP Pro PC via USB and works fine as a printer. I don't use the scanner since I have a Canonon scanner that I use. I bought a Dell Studio 1537 laptop that came with Vista Home Premium 64bit installed. I networked the laptop to the WinXP PC via ethernet cables and a Belkin router. I can transfer files between both PCs with no problems. Now I'm trying to print on the 3390 from the Laptop. When using the Vista laptop, I can see the 3390 on the network. But when I try to connect to it, a window pops up saying: ***** The server for the 'HP LaserJet 3390 Series PCL6' printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.***** So I selected Vista 64bit on the HP website and downloaded the Universal Print Driver HPUPD47PCL664.exe. Unzipped that file in a folder on the Vista laptop. Then connected to the 3390 printer again from the Vista laptop as I did before and when the pop up occured, I browsed to the folder that contains the unzipped UPD driver. I see several .inf files which is what the install program wants but when I click OK, a pop up says: ***** Windows cannot locate a suitable printer driver. Contact your administrator for help locating and installing a suitable driver. ***** Any ideas?
This question was solved.
View Solution.

mrlaw10, You do not need the HP software since your printer is already on the network.
First, do a Windows Update. Next,
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Devices and Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select HP or Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need driver for usb controller - windows 7 - HP Pavilion 15-n244sa Notebook

Hi
I have installed windows 7 over windows 8 and my USB controller isnt working. The Hardware IDs are
PCI\VEN_8086&DEV_1E31&SUBSYS_2186103C&REV_04
PCI\VEN_8086&DEV_1E31&SUBSYS_2186103C
PCI\VEN_8086&DEV_1E31&CC_0C0330
PCI\VEN_8086&DEV_1E31&CC_0C03
This question was solved.
View Solution.

Hi:
Below is the link to the usb 3 driver you need...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&sp...

Driver for Network controller

Similar Messages

Maybe you are looking for