Driver for Nvidia Geforce needed

Is it possible to get Solaris 7 working with a Nvidia Geforce 256 DDR chipset ? ( Creative Pro ) All I have at present is standard vga ! ! !
I only need to it to work in "open Windows " mode
Thanks

I am also looking for GeForce support under Solaris 8. XI Graphics
do not (yet) offer such a driver, and - judging from the discussions
in various newsgroups - I am not the only one who cannot get XFree running.
To get over the time until a working solution appears, a VESA driver
would be a nice thing to have, like in BeOS - it does not recognise my card either, but allows me to use a (admittedly slow) high-res desktop
with a decent color depth.
Is something like that available? The 640x480 in grayscale, plus display problems in CDE, are barely usable IMHO.

Similar Messages

Need driver for Nvidia Geforce Go 6150 for Windows 7

Hi, can anyone please tell me where I can download the driver for Nvidia Geforce Go 6150 for Windows 7. I have tried the drivers for Windows Vista but it does not work. Thanks in advance.

I followed this tutorial after installing Win7 on a friend's HP Pavilion tx1332LA (the tutorial is in Spanish):
http://www.taringa.net/posts/ebooks-tutoriales/2570715/NVIDIA-nForce-Chipset-Driver-(windows-7-_-vista).html
And since the coprocessor was no longer listed as an unknown device (or something similar), I assumed everything worked correctly afterwards... is that alright or do I have to check in some other way?
Well, here is a part of what the tutorial says (what was enough for me):
-Should work for 32-bits and 64-bits versions (I installed it on Windows 7 x64).
-First of all, we see that in the Device Administrator, there is an unknown device, a coprocessor. That's because Windows 7 can't find its driver.
-Download and install the following:
NVIDIA nForce Chipset Driver
ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39535.exe
and see if the coprocessor is recognized.
-If not, go to the Device Administrator and find the unrecognized coprocessor.
-Right-click on it and select Update driver...
-Select browse my computer -> let me pick -> have disk (this is what the tutorial says, it wasn't exactly the same for me, but I eventually got to pick a folder on my hard drive)
-Browse and select the following (assuming C represents the drive where everything from the file above got unpacked):
C:\swsetup\SP39535\WinVista32\SMU\smuc.inf (for 32-bits version)
C:\swsetup\SP39535\WinVista64\SMU\smuc64.inf (for 64-bits version)
Note: That is what the tutorial says, but I could only select the SMU folder and not a specific file. After selecting the SMU folder, a driver was automatically listed, I selected it and it got installed.
-Now, the coprocessor should be recognized (check the Device Manager).
Hope it helps!
Pixzeto
(PD: HP, the graphical editor on this forum sucks on Opera 10.01)

Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

Greetings to all!
Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
Would be glad to realize how to solve this... Thanks a lot.
Satellite A100-599
Current OS: Windpws Vista Home premium sp1.
Message was edited by: Airtoground

I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
Contents and Installation order
for Windows VISTA
Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
- SLP Module OEMSLP2.0
- Sun Java 2 Runtime Environment v1.6.0
1 KB928190(For updated USBHub.sys) KB928190
2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
*5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
I found this driver but it says "no suitable driver found, installation wizard stops its work".
Any ideas what could it mean?
Thanks to all.

[SOLVED] Driver for Nvidia Geforce 210

Hi guys. I'm having some trouble searching the proper video driver for my system. I need the nvidia driver for my Geforce 210.
The wiki says: "For GeForce 2/3/4 MX/Ti series cards [NV11 and NV17-NV28], install nvidia-96xx package, available in the AUR. " , but is there any way to avoid using AUR?
I've tried downloading the propretary driver from Nvidia' site and couldn't install it. So i'm thinking about the open drivers: is Nouveau a good choice in your opinion?
Thanks for reading!
Last edited by Issam2204 (2013-05-11 13:11:45)

Issam2204 wrote:I thought 2 meant 200. So what do you think i should install? Now i'm even more confused.
run the following command & post the output here:
lspci | grep VGA
if you REALLY do mean Geforce 210 you should see something like this (as I have a Geforce 210)
┌─(t0m5k1@b0x)-(1131/pts/3)-(03:02pm:10/05/13)-
└─>(%:~)
└─>> lspci | grep VGA
02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)

Driver for NVidia GeForce 2 MX 200

Hello!
I have this problem for a while... I also know that there is a patch with drivers for Nvidia, but
it does not include one for Geforce 2 MX 200 (only GeForce 2 Ulta....).
Did anyone know if there is an answer for my problem?
Thank You.

Check this link:
http://soldc.sun.com/developer/support/driver/tools/video/video-index.html

Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

http://www.nvidia.com/object/7seriestechspecs.html
Pls visit above nVIDIA web page.
based on NVIDIA web pages, 7900GTX supports MAC OS X.
but .....seems not so far.

Video capture driver for MSI GeForce 2 Pro video card

Hi,
I am in need of the nVidia WDM video capture driver for my Geforce 2 Pro video card. Model #M-8831. I was able to download it from the MSI/TW website over a year ago just fine. My computer crashed from a game bug a couple of months ago and MSI/TW does not list the capture driver I need any longer. I did email the company asking for help with no response back yet (after 2 weeks). You people may be my last hope.
I do have the cd that came with the video card, but I've never been able to install the capture driver from it. There is a button to install it, but it never gets loaded. I've tried browsing the cd and also tried installing it using the windows wizards with zero results. My only successful install was from the MSI home website.
If you need more information, please let me know.
Thank you,
Bruce ?(

If you followed the second link it says this:
Windows XP/2000/Me/98SE - WDM Driver v1.22
Version: 1.22
File Size: 1.1 MB
Release Date: December 9, 2002
Downloads
» Primary Download Site «
» Mirror Site 1
» Mirror Site 2
» Mirror Site 3
Release Highlights:
First stand-alone WDM driver release for Personal Cinema and VIVO-enabled products.
Right there at the end it says Release Highlights and says specifically that it's what you want...
Read my man, read...
Cheers!! 8)

Update drivers for NVIDIA GeForce GT 330M

Need the updated drivers for NVIDIA® GeForce® GT 330M that comes with my Vaio Z VPCZ128GX , the drivers in eSupport are from 2010, and nVidia software does not detect the 330M card
VPCZ125GX

I've updated my VPCZ1 to 340.43 drivers but it still won't accept the transition to Windows 10, seems like they just want to find any excuse to back out of their promise of a free upgrade for windows 7 users. For anyone who is editing .inf files and still not able to get it to work, you need to update your intel drivers first. The process is a bit awkward, I tried to update the Geforce with a few pre-modded drivers, using the device manager. It would always freeze during installation or ask to reboot and start in 800x600 resolution. I also tried the latest intel drivers but was unable to update them at the time, so I gave up on the idea for a while. Later, I ran into trouble running GTAV, the game would start fine but suddenly crash to desktop while loading. I remembered how the latest driver broke the intel driver, so I rebooted with the laptop in "stamina", installed the latest compatible onboard graphics driver and rebooted in "speed" mode, which incapacitated the 2010 nvidia driver so I had a new "unknown device" under "display adapters" in the device manager. I pointed it to the 340.43 drivers (latest driver I could find for 330m which still uses inf files) which I modified earlier and success, GTAV now runs. Editing inf files is surprisingly simple, just find mention of "330m" in one of the inf files (which are lists of subsys numbers) and replace the subsys number with the one from your card in device manager when using the 2010 drivers. (there are alraedy a lot of them in the inf, I guess it's true that no two 330m are the same) I've always left it on "speed", ever since it booted with the new drivers, The GPU is easily underclockable using Precision X for more battery life. http://i59.tinypic.com/swd3lx.jpg Only side effect I know so far is that the screen rotation doesn't work, although I never tried it with the old driver combo.

64 Bit Driver for MSI GeForce NX6800GS-TD256E

I need a 64 bit driver for MSI GeForce NX6800GS-TD256E.
Any idea where can I get it as I can't even find it in the official site.. Or MSI GeForce NX6800GS-TD256E does not support 64 bit?

DreamKid,
Download the latest nVidia ForceWare Drivers
Take Care,
Richard

CUDA for Nvidia GeForce GTX 780M

Hi, I encountered an prompt message from AE CC when I start the software saying this:
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray-tracing will use the CPU.
After installing CUDA 5.0 or later, restart your computer.
Therefore, I need some answers on whether I can download CUDA driver on Nvidia Geforce GTX 780M.
I am running on Mac OS X Mavericks 10.9.1, specs are as follow:
3.5 GHz Intel Core i7
16GB 1600 MHz DDR3
Nvidia GeForece GTX 780M 4096MB
1TB Fusion Drive

brianchaffee wrote:
How do you set your comp's to use the standard renderer only?
In the advanced tab of your composition settings. More info here.
If you really need 3d in After Effects and don't have time to learn C4D (although, you should make time because it's a powerful program and it's free with AE), you could get a third-party plugin like Element 3d (which is amazing) or these tried and true methods.

Normal temperature for NVIDIA GeForce 8600M GT

Hi, what is the normal temperature for NVIDIA GeForce 8600M GT when on notebook I use only word, or some programs, no play games.

Quote from: Mike on 01-February-10, 11:02:34
normal depends on the environment, the ambient temperature. Is it hot where you use it? Do you use it on a hard surface or place it directly on your lap or some cloth type surface. There are quite a number of variables. What temperatures are you noticing?
if I work with word or use internet the temperature is about 55*C

Nouveau driver (OSS 3D driver for Nvidia)

I have tried to make packages for the nouveau driver with success, but would like feedback from other users before submitting them to AUR.
To keep things clean and maintanable, i decided to create 3 packages :
nouveau-git ---- the kernel modules
libdrm-nouveau-git ---- userspace part that replaces libdrm
xf86-video-nouveau-git ---- the driver itself (the easiest package)
nouveau-git
# Contributor : Lone_Wolf [email protected]
pkgname=nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="Kernel modules for nouveau driver"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=(glibc)
sources=()
md5sums=()
options=('NOLIBTOOL')
install=nouveau-git.install
_kernver=2.6.18-ARCH
# GIT variables
_gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
_gitname="drm"
build() {
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
git checkout nouveau-1
# ./autogen.sh
# ./configure --prefix=/usr
# make ||return 1
# make DESTDIR=$startdir/pkg install
cd linux-core
make ||return 1
# install drm.ko and nouveau.ko kernel modules
# drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
nouveau-git.install
# arg 1: the new package version
post_install() {
KERNEL_VERSION='2.6.18-ARCH'
depmod -v $KERNEL_VERSION > /dev/null 2>&1
echo ">>>"
echo ">>> Make sure you have installed the xf86-video-nouveau-git package also"
echo ">>> To make this work execute the following as root :"
echo ">>> rmmod nvidia"
echo ">>> modprobe drm
echo ">>> modprobe -o --drm drm-nouveau"
echo ">>> modprobe nouveau"
echo ">>>"
echo ">>> Now edit your /etc/X11/xorg.conf to use the nouveau driver:"
echo ">>> Change in Section "Device" the Driver line to Driver "nouveau" "
echo ">>>"
echo ">>> Now start Xorg and run for cover !! "
echo ">>>"
/bin/true
# arg 1: the new package version
# arg 2: the old package version
post_upgrade() {
post_install $1
rmmod drm-nouveau || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
# arg 1: the old package version
post_remove() {
KERNEL_VERSION='2.6.18-ARCH'
depmod -v $KERNEL_VERSION > /dev/null 2>&1
op=$1
shift
$op $*
libdrm-nouveau-git
# Contributor : Lone_Wolf [email protected]
pkgname=libdrm-nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="Userspace interface for nouveau driver"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=('glibc' 'nouveau-git')
conflicts=('libdrm')
provides=('libdrm')
sources=()
md5sums=()
options=('NOLIBTOOL')
# GIT variables
_gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
_gitname="drm"
build() {
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
git checkout nouveau-1
./autogen.sh
./configure --prefix=/usr
make ||return 1
make DESTDIR=$startdir/pkg install
xf86-video-nouveau-git
# Contributor : Lone_Wolf [email protected]
pkgname=xf86-video-nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="OSS 3D driver for nvidia cards"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=('libdrm-nouveau-git' 'glibc')
source=()
md5sums=()
options=('NOLIBTOOL')
_gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
_gitname="xf86-video-nouveau"
build() {
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
./autogen.sh
./configure --prefix=/usr
make ||return 1
make DESTDIR=$startdir/pkg install

Hi
I've just get the nouveau driver installed successfully. But i had to tweak some things in your PKGBUILDS.
here you'll found the PKGBUILD i finally got.
nouveau-git (i hadn't git installed before compiling)
# Contributor : Lone_Wolf [email protected]
pkgname=nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="Kernel modules for nouveau driver"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=(glibc)
makedepends=('git')
sources=()
md5sums=()
options=('NOLIBTOOL')
install=nouveau-git.install
_kernver=2.6.18-ARCH
# GIT variables
_gitroot="git://anongit.freedesktop.org/git/mesa/drm/"
_gitname="drm"
build() {
mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd ${_gitname}-build
git checkout nouveau-1
# ./autogen.sh
# ./configure --prefix=/usr
# make ||return 1
# make DESTDIR=$startdir/pkg install
cd linux-core
make ||return 1
# install drm.ko and nouveau.ko kernel modules
# drm.ko is renamed to drm-nouveau.ko to avoid problems with the existing drm.ko module
install -D -m644 drm.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/drm-nouveau.ko
install -D -m644 nouveau.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/char/drm/nouveau.ko
libdrm-nouveau-git: nothing to change
xf86-video-nouveau-git: faced 2 problems when trying to build this package: · Missing xf86driproto (so added to makedepends). · Compilation failure when trying to build the manpage. I edit the PKGBUILD with a dirty hack to avoid manpage compilation.
# Contributor : Lone_Wolf [email protected]
pkgname=xf86-video-nouveau-git
pkgver=20061126
pkgrel=1
pkgdesc="OSS 3D driver for nvidia cards"
url="http://nouveau.freedesktop.org/wiki/"
license=('GPL')
depends=('libdrm-nouveau-git' 'glibc')
makedepends=('xf86driproto')
source=()
md5sums=()
options=('NOLIBTOOL')
_gitroot="git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/"
_gitname="xf86-video-nouveau"
build() {
cd $startdir/src
msg "Connecting to git.freedesktop.org GIT server...."
if [ -d $startdir/src/$_gitname ] ; then
cd $_gitname && git-pull origin
msg "The local files are updated."
else
git clone $_gitroot
fi
msg "GIT checkout done or server timeout"
msg "Starting make..."
cp -r $startdir/src/$_gitname $startdir/src/$_gitname-build
cd $startdir/src/${_gitname}-build
##### Avoid manpage compilation #####
mv Makefile.am Makefile.am.old
cat Makefile.am.old | sed -e 's/SUBDIRS = src man/SUBDIRS = src/g' > Makefile.am
mv configure.ac configure.ac.old
cat configure.ac.old | sed -e 's/XORG_MANPAGE_SECTIONS/# XORG_MANPAGE_SECTIONS/g' | sed -e 's/man/Makefile//g' > configure.ac
##### End of hack #####
./autogen.sh
./configure --prefix=/usr
make || return 1
make DESTDIR=$startdir/pkg install
here are my 2cents

Reccomendations needed for NVIDIA GeForce 7300 GT replacement.

I just had my third NVIDIA GeForce 7300 GT graphics card fail (got them replaced through Apple Care which has now expired). I need to get a replacement graphics card but do not want another one of these!
Specs on my '07 Mac Pro:
Model Name:    Mac Pro
Model Identifier:    MacPro1,1
Processor Name:    Dual-Core Intel Xeon
Processor Speed:    3 GHz
Any recommendations greatly appreciated!

Requires 10.6.5 - and 10.6.5 DVD retail don't seem to exist for anyone that doesn't already have 10.6 installed which means "no booting from DVD for us" if needed, and 'slipstream' drivers also is a no-go. In Panther 10.3 you could, BootCD was a great tool to have current OS X on your own DVD. Now you need to create your own flash based boot volume or something.
Check the display setup tips, running multiple displays isn't always obvious.
Radeon 5870 and 5770 on 2006 Mac Pro
I don't even think that even the custom driver folks have Leopard drivers.
Most of their sights are on ATI 6xxx or GTX 500s, and Lion.
netkas.org forum

Gaming: driver update for NVIDIA GeForce - Sat P20

i am not able to run an driver update for my NVIDIA GeForce FX Go5600 on Satellite p20-521. can someone help me out please.

Hi Cuong
I assume you use a wrong graphic driver or a wrong graphic card driver update procedure.
Toshiba recommend to use the own graphic drivers. The all drivers for European Toshiba notebooks you will find on this website:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
After successfully downloading please unpack the driver. There you should find a setup.exe. Please install it.
Well, if this procedure doesnt work so please go to device manager and select the graphic card and right click. Then you can select the option update driver. The driver source is the driver download place.

AME CS5.5 Hanging at 75% & Drive Update for NVIDIA GeForce GTX-470

Hello,
I am having problems with AME CS5.5 hanging as well. I was wondering if somone from Adobe can tell me if the latest Driver upgrade for my NVIDIA GeForce GTX 470 card of 285.62 is safe/recomended for Adobe CS5.5 Premiere/AME/Encore/After Effects programs. I do not want to cause any additional issues with my Adobe related issues. My present driver is 280.26...Thanks, Steve

I installed the update after creating a restore point.
I guess it's safe, but the behavior is the same. I still have the hanging issue.
I hope that this bug gets fixed soon.,

Driver for Nvidia Geforce needed

Similar Messages

Maybe you are looking for