Driver for Officejet 6500 E709a needs to be updated. Currently causes distortion of Excel sheets.

Per Microsoft, the driver for the Officejet 6500 E709a needs to be updated in order to resolve a problem which causes distortion of MS Excel worksheets.  http://answers.microsoft.com/en-us/office/forum/office_2010-excel/excel-2010-scrolling-problem/166a8...
From the forum page linked above:
If the issue occurs in safe mode too, change the default printer and check. If Excel works fine after changing the default printer then contact printer manufacturer to update the printer drivers.
This question was solved.
View Solution.

There is always a chance that a glitch has occurred with the original driver install.  Therefore, I always recommend, though it may not be an update, reinstalling the printer and software if necessary.  It has solved a number of different types of problems.
Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • Wireless driver for hp 6500 e709a

    Using a Fugitsu Lifebook laptop running Windows XP.  I can connect to our HP 6500 e709a printer via USB port, but cannot connect wirelessly.  Any recommendations?
    This question was solved.
    View Solution.

    What router? What error messages are you getting?  How are you trying to connect the printer to the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Windows 8 does not recognize drivers for HP Officejet 6500 E709a Series

    I have downloaded drivers for windows 8 for my HP Officejet 6500 E709a Series printer, but the windows 8 system does not recognoze them.

    Hi,
    What is the error message ? Where do you download from ? the following file or a different file ?
       http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-1/OJ_AIO_6500_E709_Full_Win_WW_140_408.e...
    Please download the above file then install again.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP OfficeJet 6500 (E709a) network problems

    Hello. I have a new HP OfficeJet 6500 (E709a) Its all in one. I am trying to use it through a network in my home.
    It is already working for 1 computer, a wireless laptop BUT not for me, a ethernet wired desktop.
    PC: Windows 7 64 bit
    Laptop: Windos Vista (dont know if 32 or 64) Using the printer succesfully wireless.
    Well the problem is when trying to scan the printer or computer won't detect each other BUT I can print from my pc to the printer.
    I installed it through the PC Add a Printer because everytime I tried it with the program downloaded from HP it wouldnt detect, EVER my connected and already tested printer. I can access the printers webpage, the 0.0.0.0.0 something page. I even tried the advanced installing way, manually typing the address the printer has but it would still not work.
    I installed everything by selecting I would wire my printer later but to continue the installation I must find a way for it to detect my pc or the otherway around.
    This question was solved.
    View Solution.

    Yes, plug the printer into your router with an Ethernet cable the run the Add Device in the Hewlett-Packard folder (Start > All Programs).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Officejet 6500 e709a fails during multiple page scans

    I have an Officejet 6500 e709a that I've used for years. I'm running Windows 8.1 64 bit. Today it stopped scanning in the middle of a multi-page document and gave me this error code, 8, [(4, 0, -2147023170)]. It will scan one page with no problem, but after 3 to 5 pages I get the error.
    I restarted the program, restarted my computer and uninstalled/reinstalled HP Solutions Center. Nothing worked.
    Any ideas?

    Welcome to the forums Christopher!
    I read your post about the scanning problem you are now having with your Officejet 6500 model. I would first suggest running the Print and Scan Doctor and recycle your network devices, if you have the printer connected wireless or ethernet. If you have the printer connected USB, try a power reset.
    Power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer.
    Power reset:
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Please let me know the results!
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Officejet 6500 (e709a) MFP service manual or help with General Error

    Hi. I have an Officejet 6500 (e709a) that I am having some problems with.  It started with a paper jam/carriage jam message and then became a "General Error 0x61011beb".  The carrier holding the ink cartridges was indeed stuck on the right side, so I followed a video showing how to open the unit.  When I did I discovered a small plastic piece with a couple of gears had fallen off.  The piece has different numbers on each side of it so I am not sure which numbers might be helpful in identifying it.  I am not sure exactly how to put it back on so I am hoping there is a service manual for this printer or maybe even just some kind of general technical reference that has assembly diagrams?  (I know this is a longshot but my local service center charges $50 just to diagnose the problem.  I only paid slightly over $100 and I could get another for that same price so I'd rather save that $50 to use buying a new one if I can't fix this myself.) If it would help I could attach some pictures of the piece in question. Thanks in advance. Jim 

    The utility is of no utility when the printer is perpetually taking itself OFFLINE. No printer is detected. I power it down with the switch, unplug the power supply for anywhere from 20 seconds to 20 minutes, plug it back in, power it back up and my stalled print job may or may not print the last page of a two-page document (first one to print in my selected print order). If it gets to the first page, only part prints then the printer sits there doing nothing. After a long time, it spits out the front page. Usually it won't even get halfway down the page.
    In the meantime, the HPHNDU.exe utility cannot even find the printer, regardless of when I press the "refresh printer list" button.
    The software/device is broken. Didn't even get two years out of it.

  • There is no driver for Officejet Pro 8500 for Windows 10???

    Unable to find a driver for Officejet Pro 8500 under Windows 10Old driver is blocked from running.  Where is an updated driver?   Was working fine under Windows 8.1.

    I have the same problem. Does anyone know where are the drivers for windows 10. Also, I'm able to downloand the HP print scan doctor, however, once it tells me I need the software drivers because their are not install in my computer for  my officerject 8500 A909g, it still recommend the HP print scan doctor but no drivers.

  • I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

    I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

    Djembe wrote:
    UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
    Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
    5. No special drivers are needed.
    Thanks. What about the thunderbolt port?
    7. I think Lenovo estimates 6 hours.
    Lenovo says 6 hours with the 6-cell battery on its website.
    BrendaEM wrote:
    Hi,
    There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
    I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • Part for officejet 6500

    I inherited a used officejet 6500 and need to get a part so the paper will feed properly. Remove duplexer if attached. There are some black plastic "fingers" pointing at a rod with wheels. One set of these "fingers" has broken (the pair on the right). Does anyone know where I can buy these "fingers"? Or do I have to go to a service center? Thanks

    The service center or HP should sell them too I would think
    http://www8.hp.com/us/en/contact-hp/support.html

  • Keep getting "program couldn\'t download" when trying to download driver for officejet 6000

    keep getting "program couldn\'t download" when trying to download driver for officejet 6000

    Hello,
    I see that you're having an issue installing the software. Have you tried installing the software from a different browser? 
    Does this happen on chrome and IE?

  • HP OfficeJet 6500 wireless twain driver( for scan to quickbooks) needed

    I have an extra HP OfficeJet 6500 wireless printer around and I wanted to see if it had a twain driver so we could use it to scan to attach directly to QuickBooks.  QuickBooks lists scanners they think would work and it is not on the list but they also state that any twain driver should work.

    Hi mowit,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Please respond with which Operating System you are running and I will be happy to research this question about the twain drivers.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    I am always happy to help so please respond back at you convenience.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Officejet 6500 E709a driver software problem

    PROBLEM - driver software does not stay connected to PC.
    Purchased this printer new 10 days ago and successfully downloaded full feature driver software package from HP web site. Install to my network with Ethernet cable went fine. 3 days ago, could not print from HP PC. Message said printer not connected. HP Chat tech advised me to uninstall existing software and repeat download and install process. Everything went okay. Today, same problem that printer no longer connected. I have repeated the uninstall/download/install process. Process went okay.
    Have others experienced the same problem? Is this an issue with HP software or does it indicate a problem with my printer?
    Thanks in advance for any thoughts or ideas.

    Hi Tim49,
    I understand you've been having some issues getting Windows 7 drivers for your Officejet 6500 printer. I'm sorry to hear you've been having this problem, but I will certainly do my best to help.
    There are definitely Windows 7 drivers for your printer. You can access the download by clicking here, you will just need to select whether you have a 32-bit or 64-bit system. To figure out which you have, just click on your Start menu, right click on Computer (should be on the right side of the menu) and then click on Properties. In the window that opens you should be able to see which system you have and then proceed to the link I provided and download the HP Full Feature Software and Drivers.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Need generic print driver for Officejet 7210 all-in-one on Windows 8.1

    Updated my Windows 8 to Windows 8.1, which removed my print driver for an Officejet 7210 all-in-one.  Attempted to reinstall.  Error that file not found.  Followed detailed process to a tee (deleted temp files, removed startup programs, everything).  Driver doesn't work but printer does with other computers.  Printer is no longer supported and no help (but is in great working condition).
    I'm looking for a generic driver that would work with my printer and Windows 8.1.  I really appreciate any help...
    This question was solved.
    View Solution.

    Hi LChristofaro,
    I have researched your error message and the Msiexec.exe error and it is an issue with windows installer. I recommend restarting your windows installer.
    To do this:
    1. Run "Services.msc" (without the quotation marks).
    2. Double-click "Windows Installer" in the Services list.
    3. Click Stop and click OK.
    4. Click Start and click OK.
    Restart you computer and try the install again.
    Let me know if this helped.
    Thank you,
    I worked on behalf of HP.

  • HP OfficeJet 6500 E709a: cannot scan from Windows 8.1; uninstall crashes at step 8 of 10

    When I try to scan from Windows 8.1, launched from the HP Solution Center, it fails before giving me a preview, saying:
    Scanning error
    4,[(2,22,80040001),(3,22,0)]
    When I run the HP Print and Scan Doctor and select "Fix Scan", it fails on the first check, saying it failed to find the driver. The text field that gets uploaded to HP includes the string "hpbxpsrender.dll: Not Found".
    I tried uninstalling, using uninstall.bat in the "OJ_AIO_6500_E709_EntScruber_140" (HP OfficeJet Enterprise 14.0), which I downloaded from HP.com. It gets to step 8 of 10 ("removing unnecessary components..."); then it hangs and Windows 8.1 says "HP Installer Uninstaller has stopped working" and kills it.
    I have tried running uninstaller in regular mode, in regular mode with my anti-virus / firewall (Kaspersky) paused (disabled), and in Safe Mode with Networking. Same result every time.
    I have run the Installer without error. I can view the HP OJ status web page in my browser (http://192.168.1.5) from both computers.
    I don't remember if scanning has ever worked on this computer. Scanning works on another computer (Windows XP). Both computers are wired (Ethernet) to the same network switch as the HP OJ.

    Hi DonaldPayne,
    Welcome back to the HP Support Forums! I see you are not able to scan to your HP Officejet 6500 with your computer running the Windows 8.1 Operating system. You have tried to uninstall the software but get an error message.  I see you have done ALOT of troubleshooting already, thank you for that, this allows me to see what has failed for you.
    I would like you to continue here and complete the steps listed below:
    1. Press the Windows key + R on the keyboard to bring up the run menu.
    2. Type %programfiles% in the run field and click OK.
    3. Delete any HP/Hewlett Packard folders.
    4. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %programfiles(x86)% in the run field, and click OK. This is for 64 bit systems only.
    6. Delete any HP/Hewlett Packard folders.
    7. Press the Windows key + R on the keyboard to bring up the run menu.
    8. Type %appdata% in the run field, and click OK.
    9. Delete any HP/Hewlett Packard folders.
    10. Press the Windows key + R on the keyboard to bring up the run menu.
    11. Type %programdata% in the run field. 
    12. Delete any HP/Hewlett Packard folders.
    13. Press the Windows key + R on the keyboard to bring up the run menu.
    14. Type regedit in the run field.
    15. Delete any HP/Hewlett Packard folders or keys that you find. (backup the reg file b4)
    16. Run Disk cleanup from Administrative Tools
    17. Now run the HP Printer Install Wizard for Windows it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    18. If you run into any problems after installing using the PIW, now we can re run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers. 
    I will watch for your reply, please make note of anything that you run into as well as what the PSDR finds.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • We couldn't release any transport request!

    Hi experts, We could't release any transport request on DEV from today. We could do it until yesterday. We have never changed any settings. Except release, we can use SAP system, and we can import released transport request to QAS . Also I could tp a

  • How do I use auto-form recognition to create PDF forms in Acrobat XI?

    I used to use Acrobat 9 to create PDF forms that would allow me to fill in text into the fields that were created.  Acrobat XI seems to have changed the way this function is performed.  Previously, I could run an auto form recognition wizard, do some

  • Portal connectivity

    Hi, While connecting MDM Server to the Portal in Step where you create the system and enter the MDM server name and password. The MDM server connectivity is fine and works if used  to connect to MDM system-Sql server. This is remote server. When I tr

  • Seeburger adapter version

    All, Can one you tell what is the latest version of Seeburger adapters and when we had reviewed Seeburger about 18 months ago, the solution for EDI 997 did not seem straightforward. Meaning unlike other EDI products, 997 had to setup and configured f

  • Plant and Location in SRM

    Hi I keep getting a strange Eroor in SRM called: "Select a location to which a plant has been assigned". I have a plant assigned, but I have no storage locations defined in R3 to feed off. Is it the Storage Location that it is referring to ? Greeting