Driver for Samsung Monitor UHD590

I have buy a mac mini and the monitor Samsung UHD590.  But the monitor font is a little burred.  I think, the resultion is not right. Or give it a special driver???
What can I do. ??

Apple support article.
Video Troubleshooting Internal and External Monitors

Similar Messages

  • HT3669 driver for Samsung CLP-510 for osx 10.8 ??

    Iam looking for a driver for Samsung CLP-510 for osx 10.8 ?? Samsung dosnt offer one and it dosnt appear at this list? Has anybody some ideas?? Thanks!

    Go to  Samsung, download driver version 10.6 and then open file in Finder. Before clicking file hold control key this will override the warning and then it will install the drivers. After this go to preferences then printers install printer and the drivers are loaded in. I used this for OS 10.8 and now 10.9
    Good luck

  • HT3669 Do you have driver for  Samsung ML 1210 printer  for mavericks? Please help!

    Do you have driver for  Samsung ML 1210 printer  for mavericks? Please help!

    I don't believe that Samsung ever made a driver for this model that worked in intel. Unfortunately, I think your printer is just too old. You can read here
    http://technicalfault.net/2011/08/22/installing-the-samsung-ml-1210-printer-on-m ac-os-x-lion/
    or else contact Samsung and ask them.
    Cheers
    Pete

  • Fix for Samsung Monitor not working after 10.6 install

    This quick fix solution worked for me. Hope it works for you:
    I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
    Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across this solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!
    WHAT TO DO TO FIX:
    Go to => System Preferences  => Energy Saver => change graphic settings to Higher Performace.
    Cheers!!

    I figured it out.  NVIDIA has an update specifically for 10.6.8 and several of their video GPU's.  go HERE to download the driver. It also took away the slow response and flicker I was experiencing.
    Here is the update info:
    CUDA  Application Support:
      In order to run Mac OS X Applications that leverage the CUDA architecture of  the Quadro 4000 for Mac product, users will need to download and install the CUDA 4.x driver  for Mac located here.
    New in Release 256.02.25f01:
    This driver update is required if upgrading to the  latest Mac OS X v10.6.8.
    Contains performance improvements for a wide range  of applications
    Contains fixes for several corruption and crash  bugs, including issues with Autodesk Mudbox, and World of Warcraft.
    Contains support for display rotation.
    Adds Driver Archive/Restore Functionality.

  • Driver for Dell Monitor

    Hi, has anyone out there found a driver for a dell monitor? I have a Dell1908FP that I'd like to swivel and use in vertical mode but Dell does not have mac drivers on its website. All suggestions appreciated.

    No drivers. The function won't work automatically.

  • Is there a driver for Samsung CLX-3170 that works with OS 10.9.4 ?

    Since I installed Mavericks my Samsung CLX-3170 Colour laser printer does not work properly.  Is there a new driver for this ?  I had a long chat with Samusng help desk that was totally inconclusive.  Trying to re-install the printer I was told that there is no driver currently available.  HELP !

    You can try looking on these 2 sites for a driver.
    Gimp - Print
    HPIJS for Mac OS X

  • Driver for Samsung ML-1675 OSX 10.9.1

    Hi, can anyone write me where I can found the driver for the printer Samsung ML 1675 to use with my new MacBook withe OSX 10.9.1?

    According to this, that printer is not supported by a built-in OS X 10.9 driver.
    http://support.apple.com/kb/HT3669#samsung
    Ask Samsung if they have one.
    Barry

  • Dead screen, laptop locked in Safe Mode with no HDMI driver for external monitor

    Hi,
    Background: This is a Windows 8 pre-loaded notebook, I have updated to 8.1 (some months ago) via the Store.
    I recently had the dead screen that appears quite common with HP notebooks.
    I connected an external monitor, notebook was fully functional.
    Backed up all contents, then updated graphics driver, no improvement.
    Then went into msconfig and forced boot into safe mode...
    Now, I cannot control the notebook at all because I can't see anything.  At this point I am just trying to get control of the notebook so I can wipe it, and sell it to a repair place, or as a notebook that works fine with a docking station or external monitor.
    Questions I have:
    1. WITHOUT SEEING THE SCREEN (dead) is there any way to get it to boot back to Windows Normal mode, or any other HDMI-driver enabled mode?  
    2. As an alternative is there any way I can get it to boot from a USB to any operating system so I can wipe the HDD and start again?
    3. Would (2) even work if I need a HDMI driver to operate the notebook - would it be possible to reinstall an OS with a dead screen, because I would need to be able to run an external monitor?
    4. How do I find my Windows Product Key without access to the notebook (can HP help here, from my notebook serial #)?
    5. Any way to perhaps mount the HDD externally in order to manually edit the boot config to return it to Windows Normal booting?
    Grateful for your comments.  Remember my objective is NOT TO FIX IT, just to get it to drive an external monitor again so I can part with this notebook with some kind of financial return.
    Dom

    Hi @Dom_Oz ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I see that your display quit and you connected an external monitor and it was functioning well.  You backed up all your data and updated graphic drivers but there was no improvement.  You booted into safe mode and now both screens are blank.
    Since both screens are blank when you booted into safe mode, I would try a Performing a Hard Reset or Forced Reset.
    to try and bring back the external monitor.
    If that does not work, can could try to do a recovery Performing an HP System Recovery (Windows 8) 
    The Windows product key is tattooed in the bios and is hidden, but if you do a recovery it should automatically get picked up.
    Yes you can try booting to an OS on a USB stick to wipe the hard drive.
    Yes you can remove the hard drive and install it in an external case and then edit as you wish or format  from there.
    If you edit the boot config and manage to have Windows reboot, I would do a factory recovery, this will  format the drive and return back to its original condition.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Need Driver for external Monitor for Macbook Pro

    Does anyone know where I can get a driver to utilize the output from my macbook pro to an external monitor?  It works great for my iOS but Windows 7 doesn't recognize any external monitor.

    I've never seen an instance where an external monitor needed a driver.
    What monitor? Did you download and install the Windows support software?

  • 4400G RS232 code for Samsung monitor 460MX-3

    Hi,
    can some one help me on how to sent rs232 command to samsung monitor 460MX-3, i just want to sent command from the control power on and power off to the monitor.
    i have:
    1. eanble the dmp RS232 control supported,non dmtech.. option. from the dmm
    2. connect a cross serial cable to the sumsung monitor from the dmp.
    i tried to turn the monitor off using this code rs232.tx_hex=0x11x0 but it doest work.
    help.
    Best Regards
    Andrew

    I believe you must us a null modem cable to connect the DMP to any display. Can you verfiy?
    The Cisco branded TVs are the DX model by Samsung so the same code to turn off the monitor for the Cisco TVs should work for the Samsung.
    We have both Cisco and Samsung TVs in our shop and the I have used the Cisco power off command for both.

  • Windows XP Driver For LCD Monitors

    Hi!
    This topic may be out of place so apologies in advance but i was wondering if Toshiba have created any Windows XP Display drivers for LCD Monitors?
    I have a Toshiba 26WL36 LCD monitor capable of producing a resolution of 1280 by 768. However, the quality of the picture decreases as the resolution is increased.
    Any help would be appreciated.
    Thanks For your time.

    Hi Jav
    If some driver were created it would be probably delivered with the LCD Monitor. The quality and screen resolution depends on graphic card.
    Sorry but it is not known to me that any LCD display need a driver.

  • Video driver for Samsung TV

    I have a media center computer that is connected to a Samsung LED TV. Windows 8 shows it as a generic monitor. Are there video drivers for large screen TVs?
    Thanks

    I use Windows 7. To change the resolution, go to the control panel and select Display>Adjust resolution or type/copy "Control Panel\All Control Panel Items\Display\Screen Resolution" into the navigation bar. Select the monitor that represents the TV,
    write down the "Recommended resolution" and select Advanced Settings. Select the Monitor tab and then Properties. Select the Driver tab and then Update Driver. Next, select "Browse my computer for driver software." Select the lower option "Let me pick from
    a list of device drivers on my computer." Un-check the "Show compatible hardware" check box. Under Manufacture, select "Standard monitor types", this should be the default, scroll the Model box until you see the Digital Flat Panel models resolution that you
    want. I suggest starting with the "recommended resolution" recorded above.
    If this resolution is not correct, check the TV specifications for the resolution or the aspect ratio. You can use this aspect ratio to figure out the resolution that you want. For example, if you want to use ?????X1080, multiply 1080 x aspect ratio. This
    should get you close enough to find the correct setting within a few tries.
    My Samsung TV allows me to change the aspect ratio for computer connections. I do not need to because I use an advanced graphics card.
    I hope that this is helpful.

  • Driver for samsung photo printer

    hi i have a samsung spp 2040 xeu and the driver cannot be found anywhere can anyone help me please ?
    thanks
    martin

    the adrian,
    I spoke to a Kodak pro person and they are aware of the problem and he doesn't think Kodak will make a fix for it. He suggested I use the TEPS software which is free. I tried it and it does work, so at least I can use the printer.

  • Driver for Samsung ML-6060 for OSX : can not find one...Help? please?

    I have spent numerous hours trying to connect my Samsung ML-6060 to my iMac, running OSX, the driver disk I have are only for for OS classic, nowhere can I find it.
    I tried the patching with Linux etc...
    anyone can help
    Samsung support is worthless...

    Matt,
    thank you for the info.
    I did find a generic PCL laser printer driver in the installed driver it worked: Thanks again.
    btw: not all of us are knowledgeable enough to know that a samsung ml-6060 is a PCL6 that uses a Gutenprint generic PCL Laser printer, 1.3...
    I did try 5 or 6 of "generic drivers" already installed, in vain, then after being told twice by the manufacturer that they do not have a driver & "I don't know of any other driver available": one, like myself, basic common user might think what I thought, not all of us know all that you know!
    thank you again, that saved made day.

  • Print Driver for Samsung printing machine doesn't exist?

    Hello. At my workplace they have recently purchased a new giant printing machine called the Samsung SCX-7145. As a disclaimer I live and work in S. Korea so of course things are more confusing. Apple computers barely exists here.
    Anyway, how can I print using this machine? It has an IP address and I tried adding the printer just using the IP address with no luck in printing. I can't find any mac drivers for the machine. Any ideas what to do?

    In case anyone wants to know in the future I just added the IP address of the printer, selected a different Samsung driver and it seems to work now.

Maybe you are looking for