Driver for SoundBlaster Live 5

May I know where can I get the driver for Sound Blaster Li've 5. I need it to install in my Vista RC build 5728.

Anyone?

Similar Messages

  • Looking for driver for SOUNDBLASTER LIVE 24bit & AUDIGY SE (CA0106) Ver 5.12.01.

    Im unable to get my Audigy onboard sound running and need to try some/lots of drivers until it is stating AUDIGY in the hardware manager
    More details: http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=23993
    5.2.0.54 can anyone tell me if this is compatible? or any details/bugs etc
    Message Edited by ozprostreet on 05-07-2008 05:20 PM

    Anyone?

  • Need driver for-webcam live!

    dose anyone have a driver for-webcam live! - i have been informed that the driver for my webcam has been classified as "end of service life "thanx

    Hi:
    If you have already installed the graphics driver, you need to install the YouCam software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135497-1&cc=us&dlc=en&lc=en...

  • Driver for WebCam Live! Pro (USB 2.0) vf-0080

    I know I have a very old webcam, but the one on my laptop broked so I have to use this.
    It is a WebCam Live! Pro (USB 2.0) vf-0080 and I wonder if there is Anyway I can find the drivers for it?

    Here is the site that you can download the driver for Webcam Live! Pro
    The driver only supports until Windows XP, but I think your webcam should be able to be auto detected in Windows 7 and Windows 8. So you may not need to install any driver if you are using Windows 7 and Windows 8.

  • Win7 driver for SB-Live! CT4760 needed

    Hallo,
    i'm searching for a win7 driver for SB Li've! CT4760 ( PCI\VEN_02&DEV_0002&SUBSYS_804002&REV_07). Some ppl mentioned kx drivers should work. I didn't test it yet but aren't there any support pack drivers available? I checked this one but it tells me no compatible card found and if i force the driver by device manager the system just hangs.
    Any alternati'ves?

    Try installing the XP driver. Just run it under compatibility mode (XP SP2). It works perfectly for me except for the creative utilities. Windows mixer works just fine. :manhappy: Here's where I downloaded the driver. http://drivers.softpedia.com/progDownload/Creative-Labs-SoundBlaster-Li've-Drivers-full-package-Download-307.html
    Regards,
    Regin

  • Windows 10 Driver for SoundBlaster XFi Elite Pro?

    Hi everyone. I'm new to this forum and glade to join it.
    My reason to join is I'm asking if there will be a Windows 10 driver for the card Soundblaster XFi Elite Pro?
    Thank you for any information.

    http://forums.creative.com/showthread.php?t=714135

  • Driver for SoundBlaster X-fi Xtreme audio Pci Expr

    I bought a sound blaster X-fi X-treme audio Pci Express,Two weeks ago. Then I travelled to Brazil...When I got here in Brazil ,I notice my dvd Driver wasn`t scratched,but broked...And there is no driver for this type of sound card in the site...Someone can HELP ME?

    please tell me how much of your CPU is using this card when you are just listening to music .
    you can find the drivers here:
    http://us.creative.com/support/downl...ype=0&x=20&y=7

  • No driver for SoundBlaster X-Fi XtremeGam

    I cant find a driver for it, by the way, im using Media Center.

    I have the same problem with my sound blaster X-Fi XtremeGamer Fatalty Pro Series... i posted another post asking the same question here:?http://forums.creative.com/creativel...essage.id=0856?some guy said they are all the same drivers, but i don't know for sure yet.

  • XP driver for SB Live! Player 1

    Hi,
    who can tell me from where I can download a driver for my very old card?
    Thanks
    Conga

    It sounds like you'll need that update:
    Filename: Recorder_2_00_34_(ENG).exe
    This package upgrades the Creative Recorder to version (2.00.34).
    This update:-
    . Enables the use of Creative Recorder with the SBLi've! DriverUni-Pack.
    Requirements:
    This update will install ONLY if the following requirements are met:
    * SBLi've! DriverUni-Pack is installed.
    * Creative SB Li've! series audio card installed.
    * For Windows 2000 & Windows XP users ONLY.
    Cat

  • Problem updating drivers for soundblaster live value CT4

    Hi all, I wonder if anyone can help me, i have a creative soundblaster li've value sound card model no. CT4780 it's about 4yrs old and i am trying to update the driver as the last one to go on it was in 2002. I have been trolling the creative website and downloaded the automatic update driver search but when it finishes it says i have the most current update for my card. I have had a look at the Li'veDrvUni-pack and being a bit of a novice to driver installing i was wondering if that one would be okay for me to download and install. Would appreciate any help.....

    Hi Shrek
    I just listed my first post. I bought a dell Dimension XPS T500 in 999. It used a CT4780 that fed a good Altec Lansing speaker system. When I built my present budget PC I used the old CT4780 card. Because I?am using XP Pro I loaded Li'veDri'veUni-Pack.exe driver (released 280203). This worked fine.
    But I do not have the SPDIF working as yet. My MSI? MS-6533XG?Motherboard does have?header pins for SPDIF but?so far I haven't used them. I am looking for drivers to use if I can get the SPDIF connected.
    Do you have any info?on my needs?
    Thanks
    Bailsburg

  • Software and application cd for Soundblaster Live/Audigy Windows

    Hello, i have got a Soundblaster Li've Platinum 5. and a computer with Windows xp. I need the software and application cd for the Soundblaster li've/audigy to make it work as i want .Who can help me get this cd or a copy?Anton.

    Download Sound Blaster CD ISO?s:
    http://hosted.filefront.com/BadBoyforum

  • Lack of Documentation for SoundBlaster Live External 24-

    Hello,?I purchased the SoundBlaster Li've External 24-Bit card so I could load?soundfonts?and play?midi files. I could find no instructions anywhere on to how to load soundfonts into the card. After struggling many?days looking thru the .exe files, I happened to stumble on the SFBM (Soundfont Bank Manager) Graphic?Equalizer and EAX modules which I was able thru trial and error to finally get?working.Did I miss something somewhere or why is there no mention in Help about these modules or anywhere else I looked?For a "newbie" like myself it would have been nice if there was a help topic?on "how to load soundfonts into your SoundBlaster". Thanks,?dalester?

    Anyone with an insight with WHY it was made with USB .

  • Speakers for soundblaster live 24

    i`ve just installed creative soundblaster li've 24bit soundcard,could you tell me the best 7. speakers to buy with this soundcard. I`ve been looking at the creative inspire T7900 7. speakers are these compatable with the soundcard above.

    bluenelly67,
    Those speakers are compatible and are very good (especially for the price). The best 7. speakers we have would be the Gigaworks S750, but they are aimed at the higher end audio cards like the Audigy 2 ZS. They would work with the Li've! 24bit, but the feature set on the card really matches better with one of the Inspire 7. speaker sets.
    Jeremy

  • No Support for SoundBlaster Live! Platinum

    I own a SoundBlaster Li've! Platinum 5. and recently discovered that it is the only piece of hardware not supported by Creative on Windows Vista (No Intended Development).
    It's Top product has no intended development for Vista. However, even the much cheaper SoundBlaster Surrond 5. has intended development. Am I missing something here?
    I replaced my old Windows XP Pro with the newer Windows Vista. All the hardware components of my PC have available for download, drivers and or software for Windows Vista, All but one, the most expensi've component, my much loved SoundBlaster Li've! Platinum 5..
    I am not complaining about the quality of the product, as I like to reinforce is outstanding. I am a music lover, which is the reason why I bought the SoundBlaster Li've! Platinum 5.. With the Li've! interface, I can connect all my analog equipment (VHS, Tape deck and Turntable) as well as use the remote control to control the PC. I changed the batteries of the remote last month, for the first time since I bought the PC. Impressi've, as most makers just use cheaper batteries which only last a month or so.
    My PC is only 3 years old. A P4 3Ghz with dual channel ram is still a fast machine.
    The Radeon 9600 graphics card is supported, The Leadtek Digital tv tuner is supported, Even the cheaper onboard sound (Realtek 7.), which I never use, is supported.
    Since this SoundBlaster Li've! Platinum 5. was the most expensi've of all SoundBlaster models, it does not seem right that Creative only supports the cheaper, everyday models.
    It does send the wrong message to consumers. I tells the consumer not to buy Creative's expensi've models and instead buy the cheaper models. Am I the only customer with this problem?
    Every single owner of this great model won't be able to update their machines to Windows Vista. Please Support this great model, Creative's own Rolls-Royce.
    Message Edited by webpet on 09-29-20070:42 AM
    Message Edited by webpet on 09-29-20070:44 AM
    Message Edited by webpet on 09-29-20070:56 AM
    Message Edited by webpet on 09-29-20070:58 AM

    I did not use the files available for download from this site. The original disks that came with my boards contained software for Windows 2000.When I upgraded to Windows XP, I rang the local?office of Creative and arranged to have the Creative?software for Windows XP?deli'vered by mail. I received a disc with all drivers for both boards and the remote control. It has the only way that I got it going on XP. The irony of buying expensi've, good quality boards is that the hardware outli'ves the operating system that it was built for originally. And to reward customer loyality, the hardware makers, stop supporting their own?flagship models in the hope that we will eventually buy their latest, more expensi've products, which in most cases is just a marketing exercise?at re-naming old?products, while increasing the prices of product lines which have poor customer demand. How many?Audigy 7. models have they been so far?99.5% of customers can not tell a SoundBlaster Li've Platinum 5. from an Audigy 7., based solely on hearing alone, since?both cards?have such similiar real world performances.
    ??Message Edited by webpet on 0-06-200705:3 PM

  • Support for soundblaster live 24

    i do not see my card on the support page anymore. is my card done with?

    You mean like this page here,
    http://support.creative.com/Products...&prodName=Live! 24-bit&subCatName=Live!&CatName=Sound+Blaster
    Granted the new support page format sucks, but if you scroll down to the bottom of this page,
    http://support.creative.com/Products...=Sound+Blaster
    it quite clearly says,
    If your product is not listed above, please click here .

Maybe you are looking for

  • Error when upgrading Oracle Identity Manager 9.1.0.1 to OIM 9.1.0.2

    Hello friends, I upgraded Oracle Identity Manager 9.1.0.1 to Oracle Identity Manager 9.1.0.2,after the running the command to apply the patch: OIM_HOME/xellerate/setup/patch_weblogic.cmd/sh WEBLOGIC_ADMIN_PASSWORD OIM_DB_USER_PASSWORD I get the error

  • Unable to create virtual folder. Too many folders

    Hi, We are getting this error while trying to create new folder in UCM (even trying directly from UCM throws same error) oracle.stellent.ridc.protocol.ServiceException: Unable to create virtual folder. Too many folders Has anyone experienced this? If

  • Abap mapping: remove a parent or child node.

    Hi all, I will trying to remove a parent node (and all childs related to it) or a specific child (field) om my XML input message to obtain a new output message. Reading the meaning of the methods remove_node and remove child (if_ixml_node) I can not

  • ATP: Third party and Individual PO

    Hi, Wanted to get an expert advise on ATP for third party and individual PO item categories...If SO item is created, qty is not confirmed auto until PO is created but manually system confirms the qty even if only PR is available. Regards, Alok

  • Transaction cannot be posted due to error in price determination

    Hi Experts, I am procuring components thro purchase order created on 2007. When i tried to do GR with respect to Inbound delivery, it is throwing error as " Transaction cannot be posted due to error in price determination" Please suggest.