Driver for SR245 LabVIEW 7.1

hallo,
i'm looking for a driver/VI's of sr245,sr250 Boxcar Averager for Labview 7.1.
Im using MAX Version 3.1.1.3004. Can anyone please send me the Software or direct me
to the webpage how the download.
thx

Hi Dennis, thx for your answer, but unfortunately I do not find any conversion tool on the suggested page:
http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=1282 .
Am I doing something wrong?
Thx, Bennomat

Similar Messages

NI DAQ driver for multiple LabVIEW versions

Hi ,
I have installed LV 8.0 and LV8.6 in my PC. I have installed DAQ 8.8 and it is getting detected in LV 8.6 and not in LV 8.0. So i tried to install DAQ 8.6 which supports LV 8.0.While installing it is showing up that a higher version of DAQ driver is already installed .
I want the DAQmx functions in LV8.0.
Is uninstalling the higher version of DAQ the only option??
Anyone outthere faced this type of issue?
Thanks,
Niju
Solved!
Go to Solution.

I can understand why the drivers might not be able to co-exist, however, it seems unusual that LabVIEW 8 has been abandonned in the newer DAQmx without even a simulator placeholder for the deactivated files.
I would like a set of DAQmx drivers that allow LabVIEW8 VIs to open without error, but only a warning that the DAQmx drivers are simulated. There will be a lot of LabVIEW 8 VIs supported well into the future, and this support is along side newer version of LabVIEW on the same development machine.
A work around, or possible better solution, is having a utility that would switch DAQmx versions between the various LabVIEWs on demand and quickly. This feature is has been provided for switching versions of TestStand for years. It is time to provide it for DAQmx.
NI developers and managers are you listenning?
Thank You
Robert Thebert
Certified LabVIEW Architect
Supporting LabVIEW7 through LabVIEW10SP1

Where can I download the switch driver for macintosh labview 3.0

Our lab has been using labview 3.0 in a power macintosh. Now we need the
following drivers, I checked Ni website and only got those drivers for
labview
5.0 and 6.0, no 3.0.
I will apprieciate if you could tell us how to get it.
Manufacturer(s) Keithley
Description Switch System
Model(s) 7001
Interface(s) GPIB
Instrument Type Switch System
Original Release Date 01/01/94
Manufacturer(s) Lake Shore
Cryotronics
Description Auto-Tuning Temperature Controller
Model(s) 330
Interface(s) GPIB
Instrument Type Auto-Tuning Temperature Controller

See Aaron's answer.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000A76A0000&USEARCHCONTEXT_CATEGORY_0=_50_%24_6_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_50_%24_6_&UCATEGORY_S=0
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I use labview 8.0 and i can not run daqmx driver for pcmcia 6062e daq card

i use labview 8.0 on window xp .when i installed a PCMCIA daq card 6062E, i could not run daqmx driver.It is fine to see that the traditional version is working well.When i install daq card sometimes it is working well with traditional driver but mostly i see error on reading an analog input from PCMCIA daq device.An error called 'base adress' occures .I use last version of driver that is daqmx 8.0.1. and i have installed this correctly but again i could not see any signal on the test panel for daq-mx driver.I don't know what is the problem.Also when i install PCMCIA daq card Please reply this message.I need your helps.
Thanks

Hello,
Thanks for your reply.I will try to answer your questions.
I have checked the Device Mananger and I have seen that the device is detected by Windows XP. For another question the card shows up under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy) Devices consistently in the Measurement & Automation Explorer.I use a way that I reset the driver for traditional NI-DAQ in MAX,and then i reset the device for NI-DAQmx driver in MAX and again i tried to run the test panel of DAQmx driver but again i saw a wrong signal or noise signal on the test panel i could not see the sinusoidal signal that i connected. i do get the test panels to run with the card using the DAQmx driver, But could not run the DAQ diagnostic utility.The error was as i specified below.
03.05.2006 09:49:35
Results saved to: C:\Documents and Settings\serkan\Desktop\Diagnostic Results.txt
Selected Device: Dev1
Device Type: DAQCard-6062E
Serial Number: 107509E
Device Support: (PASS)
NI-DAQmx Version: 8.0 (PASS)
Device Reset: (FAIL)
Error -50002 occurred at an unidentified location
Possible reason(s):
The specified device is not a valid device. The operation could not be completed as specified.
------ DIAGNOSTIC UTILITY ABORTED -----
And for your last question i can say that i have used the DAQ card on other laptops.But the results were the same.İ hope to see your reply
Thanks,
Serkan Buhan
Electrical-Elecronics Engineer
Researcher
TUBITAK-BILTEN

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Yokogawa UT driver for LabWindows/CVI 6.0 won't translate to LabVIEW 8.6?

The device driver for the Yokogawa UT series furnace controllers is in LabWindows/CVI 6.0 and I would like to use it in LabVIEW. I tried to use the utility to convert from LabWindows/CVI to LabVIEW, but it said it couldn't and that the device driver is from before LabWindows/CVI 5.01.
In any case, here is the series of events.
I downloaded the LabWindows/CVI to LabVIEW Converter, from
the page on LabVIEW's developer's connection that had the driver for the
Yokogawa UT controller.
From an empty LabVIEW Block Diagram, I click
Tools>>Instrumentation>>Create LabVIEW Interface to LabWindows/CVI
Instrument Driver...
This takes a little while to load. During loading an
FC_Interface_Main.vi runs, apparently trying to find a file.
Once that is done, the two options are Basic and Advanced. I leave
basic selected. I click next. browse to find the ykut.fp file from the
driver I downloaded.
I then click next. The error window that is seen in the screen shot is
then shown.
I called a tech support guy at NI about this, and I e-mailed him with all the above, but there was no reply, though the conversion utility is no longer available on the same web page as this specific device driver.
In any case, if anybody could give a little guidance, it would be appreciated.

Hello Screamingzebras,
I converted the .fp file to be version 5.5 and ran the utility that was mentioned. I have attached two files to this post. "ykut.zip" is the converted .fp file (version 5.5). "yut.zip" is the converted instrument driver.
Regards,
Jon S.
National Instruments
LabVIEW R&D
Attachments:
yut.zip ‏174 KB
ykut.zip ‏25 KB

Is there any LabVIEW driver for the Agilent 53147A counter/power meter?

I am trying to find a LabVIEW driver for the Agilent 53147A counter/power meter, but I cannot find it. Is there any?

NI does not have a driver and a quick check with Agilent shows that they don't have a driver either.
You can go to http://www.ni.com/devzone/idnet/ and request a driver. You will also find links on how to create your own driver. Your other option is to use the Instrument I/O Assistant.
p.s. In the future, you should use the Instrument control board for posting questions. this board is for NI counter/timer products.

Hp driver for labview for hp8156a attenuator

I am looking for a hp8156a driver for labview. There is not one posted in the driver section of this site. Thanks

Here is a link to the programming manual. Section 8 shows the commands. It will take some work, but you can write your own drivers.
http://www.home.agilent.com/upload/cmc_upload/All/opat0500.pdf
Message Edited by unclebump on 07-12-2005 04:21 PM

RS232 Labview driver for SR830 lockin Amplifier

Hi,
I want to install Labview driver for Stanford Research SR830 lockin amplifier for RS232 port. NI has drivers for GPIB but I could not find any for RS 232 comm port.
Please let me know how can I find driver for RS232 port.
Regards,
Nitin

Dear Jason S,
I also want to communicate with sr 830 with the RS232 interface. You said I had to rewrite the whole thing. What does that really mean? Rewrite the driver? If so, what language will it be?
JasonS' wrote:
Hello Nitshu-
As you mentioned, this driver only supports GPIB, and not RS-232. This driver was originally created in 1994, so it was not created using VISA. This means that to convert this driver you would need to essentially rewrite the entire thing. There are not currently any plans to update this driver to support RS-232, but you could easily communicate with it by adding a GPIB Interface to your system.
Let us know if you have any specific questions we can help answer.
Jason S.
Applications Engineer
National Instruments
Thank you for answering my question

Where can I find a LabView driver for HP 4142B?

I'm using LabView 5.0.1 software.

I have not seen a driver for the 4142, but you may want to look at the 4155. This is a similar instrument and there are VXI PnP drivers for it on the Agilent web site. (That is assuming you WANT VXI drivers).
They may at least give you a starting point.
Kevin

Driver for N9010A for Labview 2011

I am looking for a driver for Agilent N9010A Spectrum Analyzer for Labview 2011, I see the drivers for 8.6 and 2010 but we need it for 2011.
Thanks

2011 can load anything from version 6.0 and up so you don't need a specific 2011 version.

Labview 6 compatible driver for HP89410A Vector Analyzer

Does anyone know where I can get a labview 6 compatible driver for an HP89410A Vectory Analyzer?
I have found labview 7 and labview 8 drivers for the hp894xx family of devices, however I cannot use them as I only have labview 6.
Barring a prewritten driver, how hard would it be to convert a labview 7 driver to make it compatible with labview 6?

The conversion is easy since there is a VI Tree VI in the driver. Since the driver was originally written in 1999 and has been up-converted to 7.0 and 8.0, saving it back down to 6.0 shouldn't be an issue.
Attachments:
hp89400_6.zip ‏1194 KB

Driver for MM4000 series (motion controller) for labview 6.1 (gpib)

Hello,
I need the instrument driver for a newport motion controller MM4006.
I found the driver for MM4000 series, it could be ok, but I need it for labview 6.1 and not for labview 7 or 8.
Is it possible to find this driver for older version of labview than 7 or 8?
Thanks
Best regards.
Ludovic

Good idea, I'm not sure of the result, but... Here is the zip file (aviable here).
(oups, you were faster ^^)
Message Edité par Mathieu R. le 12-08-2006 05:19 PM
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer
Attachments:
npmm4000.zip ‏419 KB

HP 54501A - Instrument Driver for LabView v.7 or v.8

Hi all,
I'm looking for HP 54501A - Instrument Driver for LabView v.7 or v.8. I have NI gpib/usb controller installed, but cannot control the scope via Labveiw.
The link I found at NI web site within drivers section seems to be broken so I couldn't download it!
Please, anyone, suggest/help!

The link you were given works for me. You can try it again. The given link brings you to a page where the CVI and LabVIEW drivers are listed. the direct link to the LabVIW driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9455659CE034080020E748... .

Need SPARTAN 3E board Driver for Labview FPGA 8.5 !!!!!! Thx

HI!!I need the spartan 3e driver for labview 8.5(not for labview 8.6) for school useI try to download it from ftp://ftp.ni.com/outgoing/NISPARTAN3ELV85.zip
but this link is dead now. Could somebody send this driver to [email protected] PLZ? Thank you a lot for all in advance
Solved!
Go to Solution.

Hello,
I'm looking for same (Labview FPGA 8.5 for Spartan 3E). But it isn't available on related url now. I'll be glad if someone can help to find driver.
Best regards,

Driver for SR245 LabVIEW 7.1

Similar Messages

Maybe you are looking for