Driver for the bluetooth board on my NW9440 for Windows 7

I just upgrade it to Win 7 and the bluetooth board is not recognize by Windows, it was working on XP and vista.
The HP part number of the board is 409993-001
Or if I can find a replacement.
Thanks.

On Fri, 15 Jul 2011 21:36:53 +0000, microsoft_questions wrote:
After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model No. p6710f. I located the drivers on HP's website <http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-89905-1&cc=us&dlc=en&lc=en&os=4063&product=5049513&sw_lang=>,
but Windows 7 Enterprise is not listed as compatible. Compatibility list:
Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), 
Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
Windows 7 Ultimate and Enterprise are essentially the same with regard
to their software. Only the license is different. So if it's
compatible with Ultimate, it's also compatible with Enterprise.
Ken Blake, Microsoft MVP

Similar Messages

  • Need driver for Windows 7 for bluetooth

    I have ipod touch with 4.1 and windows 7 64 bit home premium. When I try to pair the touch and the computer, the pair starts but on the windows side it says it can't find the driver for the device. Looked at windows update and through the forums and can't seem to find anything.
    Any suggestions where I could find the necessary ipod driver for Windows 7?

    Reviving this because I couldn't find the answers anywhere else. After doing some research, I found this page describing the problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/apple-ipod-t ouch-bluetooth-not-working/fc05abc7-c54d-4fe1-a1a3-754991232e4c?page=1
    However, the solution therin mentions manually selecting AVDT Drivers for your device, which don't seem to exist on Windows 7 64 bit.
    Some assistance would be greatly appreciated.

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • I am confused by the installation step that requires you to create a bootable USB drive for windows installation.  What is the ISO image and why has it selected my Passport backup drive as the destination disc?

    In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation.  To do so, I must choose an ISO image.  What is that?  When I click "choose" I don't understand the options presented.  Is this the destination of the partition or where Windows will reside on the Mac?  Why does it also indicate the the destination disk si my WD Passport Back up drive?

    OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive).  I also have  the discs for both 64bit and 32bit Windows along with the product key.  I am still not sure what to do when faced with the options after "choose".

  • If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

    If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

    If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
    If you want to run Mac and Windows at the same time, you could do what I did:
    Get Parallels
    Install Windows as VM on top of Parallels
    Install Office in Windows
    Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
    It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

  • Need Driver for Windows 98

    I just got this iPod Nano and it wont load the driver or iTunes on my windows 98. Is there some place I can get the driver for Win98?

    Useful links
    iPod USB driver for Windows 98
    Guide to iPod and Windows ME
    Anapod Reinitializer 1.0.0
    Anapod Reinitializer is a free, lightweight utility for reformatting and reinitializing your iPod. Its function is equivalent to the Restore button in the Apple iPod Updater utility. Anapod Reinitializer runs on all versions of Windows, so it allows Windows 98/ME users (who cannot use Apple's software because it only runs on 2000/XP) to format their iPods.
    Anapod Explorer 8.7.3
    Anapod Explorer is hands-down the most advanced Windows software companion for your iPod. Anapod can copy and backup iPod music and playlists to your PC and integrates your iPod into Windows Explorer as a full-fledged device under My Computer, allowing you to transfer files to your iPod as well and use a familiar Explorer interface to manage on-board music, playlists, contacts, notes, and more. Also included are a built-in database called AnapodSQL and a one-of-a-kind web-based streaming interface to your iPod called Anapod Xtreamer.

  • HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

    HP Officejet 4255 driver for Windows 7, 32 bit.
    Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing. 
    After upgrade to Windows 7, it has become a problem. Some solution should be given.
    Can someone help?
    Regards,
    Raul

    Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
    I tried again the GPS, and it wasn't working.
    Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
    Result: now GPS is working (same place, same conditions, just 5 minutes later)!
    Don't know where the difference is...
    600, R52, T61p, X301

  • Lenovo Thinkpad 8 Wifi driver for Windows 10?

    I've installed Windows 10 Technical Preview on my Lenovo Thinkpad 8. It's been working pretty nicely, except for one thing: the Broadcom Wifi card driver (Broadcom BCM4324 Wireless LAN Driver). Since this doesn't work I have to use a USB antenna.
    This driver has gotten no update since the release of the Thinkpad 8! I tried running it in "Windows 8 compatibiliy mode" and that still doen't work. Does anŷone know of a possible way to make it work (either with an update, or an older driver in compatibility mode)? Any idea or suggestion (or word from Broadcom) is welcome!

    I had the same problem and installed the Win 8.1 version of the driver.
    First deinstall the microsoft driver, download the driver from http://support.lenovo.com/<xx>/<xx>/products/tablets/thinkpad-tablet-series/thinkpad-8/?tabName=Down...
    replace <xx> by your language code. eg. en (my language code was de)
    look for Broadcom BCM4324 Wireless LAN Driver for Windows 8.1 (32-bit) - ThinkPad 8 or (64-bit in case)
    Start the installer and you're done.
    strolchi

  • HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

    Dear
    I need
    HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
    can anyone provide me ? no links to read text, direct solution is welcomed
    thanks in all

    Hi.
    You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
    For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
    Please let me know of any issuesm
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Deskjet 1280 Driver for windows 8.1 Pro

    Hi Team,
    I have upgraded my compter operating system from windows 7 professional to windows 8.1 pro now, I unable to install  HP deskjet 1280 printer to new operating system. 
    Can you please send me a link to download the driver.
    Regards,
    Umesh

    Hi @Umesh_kanth ,
    I understand that you need the driver for Windows 8.1. I would be happy to help you.
    I checked the website and unfortunately there isn't any drivers to be able to download for Windows 8.1 for the HP Deskjet 1280 Printer. But you should be able to install the printer with a Windows generic driver. Plug the printer into the computer to see if Windows will automatically install a OS. driver.
    You might have to add the driver manually, here are the steps:
    Go to the start up screen. (tiles menu)
    Type in "Devices and Printers", select settings, click on Devices and Printers.
    Click on Add Printer and follow the steps.
    Select the HP Deskjet PCL3 Class Driver from the list.
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP deskjet F370 driver for windows 8

    I don't seem to be able to find a driver for Windows 8.1 that will allow me to use my HP Deskjet F370. Can anybody give me advice?
    This question was solved.
    View Solution.

    Hello hnnh,
    There are two ways to download and install the ful featured software  for Deskjet F370..
    1> Please download and run the HP Printer Install Wizard from www.hp.com/go/tools  
    2> Or click HERE to go to driver page, select your PC OS , click next and then click on Driver and download full featured software.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HP Photosmart 325 driver for Windows 7, 64 bit

    I cannot find a driver for Windows 7, 64 bit to run the Photosmart 325 printer. Does one exist? Is there a work around? (The driver for Windows 7, 32 bit does not work)

    Use the Photosmart 320 series driver available through Windows Update.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit

    I had an issue with installing an HP LaserJet 5 printer to a WIndows 7 64-bit box.  I thought I would post my experience and solution to this problem so that others can quickly resolve similar issues.
    If you connect as I did with a Parallel Printer-to-USB cable, then Win-7 searches for drivers automatically. But none werre found. However, using "Add Printer" via Control Panel/View Devices and Printers/Printers and Faxes, then left click starts the process for finding and installing the HP driver needed.
    No need as others have suggested to go to HP Support Center to install their Universal Printing PCL 5 driver found here:
    www1.hp.com/...Universal Print Driver for Windows PCL5/
    Hope this helps speed you on your way!

    Thanks for sharing your tip RatioCynic!  That's what this forum is all about!
    Happy printing!
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

  • CORRECT DRIVER FOR WINDOWS 7 AND HP COLOR LASER JET 4600dn

    I'm having a problem with our IT department.  My old 4600dn worked great until they started downloading new drivers for Windows 7, which they installed just recently.  Now the one he INSISTS I use has only one tray selection.... Auto.  I'm trying to print business cards..(absolutely no problem till now).... but he INSISTS that this is the only driver. Then he wants me to choose Pg.....select 1, then MANUAL DUPLEX.  That's almost impossible for the printer. I'm almost POSITIVE you have a print driver that will allow me the tray selections I had before he installed Windows 7 and this particular driver.  I always used "Tray 1," CURRENT PAGE, it zoomed through the perforated cardstock like a streak!!!!  Now, the poor printer is trying to run perforated cardstock through the duplexing unit.  Out of 10 pages of cards, I ended up with 1 front printed and 9 pieces of cardstock that stuck in the tray and jammed in the duplexing unit.  Is there a CORRECT print driver for this particular printer that will allow all my normal functions to be visible and viable?  I don't have the model, nor serial #, as it is work printer and I'm at home now, so I can't get on chat.  He is hard to get along with and has been playing games this whole time.  I found one driver he inadvertantly left a day and a half ago and printed the cards like lightening, as it used to....7 minutes and I had 200 cards for two different staff members.  PLEASE HELP!  I think he's leading me down a merry path.  It also has to be able to duplex fairly heavy graphic pages...and even the driver he accidently left as an option, won't print the graphics.  I just KNOW you have a driver with all the options that will allow it to print to Windows 7 Operating System with all the former options.  HELLLLLLLP!  
    Thanks sooooo much!  
    Kathi T.
    [text removed for privacy]

    Any suggestions re correct driver for windows 7 and HP 4600dn?

  • Use external drive for windows and mac

    Hello,
    I just bought a external 320Gb Western Digital Drive. I would like to use
    the drive for windows and mac.I will not like to make partation on the drive
    to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
    Thanx.

    If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

Maybe you are looking for

  • Mac Mini with an LG Flatron Monitor

    I recently bought a Mac Mini and hooked it up to an LG Flatron W2240T using a VGA cord.  Everything works fine and the monitor display is great...BUT, when my computer goes to sleep and then I wake it back up, everything is "zoomed in" and pixelated.

  • Ipad air question

    i have an ipad air. very , very impressed. my wife has a samsung which is a great little machine, however... apple is not an orange... question- my ipad heats up , like the underside of some laptops ,  what do you think?

  • IPad too delicate for the price?

    I have recently had alot of trouble in replacing my ipad 3 screen after a pound coin fell on it I was extremely suprised when i looked at my device after the thud to discover a broken screen. Any other device that i have owned has never been so delic

  • InDesign CS6 saves file, but crashes when I try to open this file

    Hi, I am having a huge problem with Indesign since yesterday. It worked fine before. I use Adobe Creative Suite CS6. Since yesterday, I have problems with files that I just saved. I can open older files (from before yesterday), but I cannot open any

  • Error Page flow in sp2

    I was using weblogic platform sp1 and upgraded to sp2 . In sp2 i get following error during build. ERROR: Controller.jpf:287: There is no @jpf:forward with the return-action attribute defined for this nested PageFlowController. ERROR:      SUGGESTION