Driver for USB digital speaker?

Last time I bought a set of digital USB speaker (...Pleomax PSP-7000W/Christal Edition). The description on the packing up was clear: Compatible with Microsoft Windows,..... and Mac 10.1 or later, driver disc included. When I wanted to install the driver, I found out, that there is only software for windows on the CD!!!
The support of Pleomax/Samsung does not answer me. Is there anyone with an idea, if there are drivers for Mac - and how I can get them?
Greetings from Thailand,
DIETMAR
G4   Mac OS X (10.3)   450 MHz PowerPC G4, 576 MB SDRAM

Just plug them in, and make them the default output source in system preferences, I doubt you need any drivers. Windows needs drivers for every little thing, OSX does not.

Similar Messages

  • Driver for CT4660 digital I/O card - with Soundblaster Live SB0

    Hi - I searched the Knowledge Base here and the Support Driver section of the Creative Labs website and nowhere can I find a driver for the Digital I/O card CT4660. I have a Soundblaster Li've SB000 and the digital I/O card together with the connector cable. Can anyone help me out or point me in the right direction? Googled the web too, but just found one other message of someone looking for the same thing with no replies posted to that thread.
    Thanks and happy New Year.
    Mike

    ort 0) configured for buffered output. Intermittently the following error appears, "An exception 0E has occurred at address in VxD NIPALK (01) + address. This was called from address in VxD NIPALK (01) + address. It may be possible to continue normally.I've never seen this error before, but there is a newer version of the NI-DAQ driver (6.9) available for download from the NI website at:
    http://digital.ni.com/softlib.nsf/current

  • Driver for USB SB live! 24 bit exter

    I left my CD at home in Hong Kong and now I'm in the USA, so would any body tell me where could I get the driver for USB SB li've! 24 bit external?
    Thank you very much, I'm really sad as I just bought something new and can't use it.

    jkiang,
    The driver is not available for download at the moment. You could check with Direct Sales Department if they have the CD for order. Their phone number is -800-998-000 and it is option #. They are open from 9:00AM to 6:00PM (CST) Monday to Friday.
    Jason

  • Need Chipset Driver for USB support

    Hi.
    This Windows XP-SP3 PC has 4xUSB2 or 2xUSB3 on-board ports, and all have failed. All USB devices are yellow-flagged in device manager.
    I have run SFC \SCANNOW and it runs to completion, and I have tried right-clicking on a yellow-flagged USB entry in Device Manager and selecting Update Driver, but that only results in the following dialog:
    Cannot Install This Hardware
    There was a problem installing this hardware:
    Universal Serial Bus (USB) Controller
    An error occurred during the installation of the device:
    The driver installation file for this device is missing a necessary entry. This may be because the INF file was written for Windows 95 or later. Contact your hardware vendor stop
    It has been suggested to me that I should try to obtain the Chipset Driver for USB support. Running Speccy reveals the following about the mainboard:
       Manufacturer   MICRO-STAR INTERNATIONAL CO.,LTD
       Model   MS-7267 (CPU 1)
       Version   3.0
       Chipset Vendor   Intel
       Chipset Model   i945P/PL/G/GZ
       Chipset Revision   A2
       Southbridge Vendor   Intel
       Southbridge Model   82801GB (ICH7/R)
       Southbridge Revision   A1
             BIOS
             Brand   American Megatrends Inc.
             Version   V7.1
             Date   9/02/2007
    Can you help me out with this?
    Thanks very much.
     - Rosie

    here you can find all drivers for your mobo:
    http://www.msi.com/support/mb/945GCM5F_V2_FSB_1333.html#down-driver&XP 32

  • Windows 7 64-bit driver for Canon Digital Rebel XT

    How do I interface my Canon Digital Rebel XT with a computer running Windows 7 64-bit?

    You are correct.  Canon does not provide a driver for Windows 7 64-bit.  You have to change the communication mode in your camera and then use Windows Photo Gallery or other software to transfer the photos.  Here is the response that I received from Canon tech support (it works):
    "To connect your camera to a Windows Vista or Windows 7 computer, you'll need to change the communication mode.
    To set your camera up for this, please do the following:
    With the camera disconnected from the computer, turn the camera on.  Press the "Menu" button.  Now select the [Wrench, Hammer, 2] tab.  Scroll down to "Communication" and press the "Set" button.
    Select the [Print/PTP] and press "Set".  This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT Instruction Manual.
    Now connect your camera to your computer and turn the camera on.  Your computer should now recognize and have access to your Digital Rebel XT.
    Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
    You may download your pictures using Windows Photo Gallery, or you may use a card reader to download images.  If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com."

  • Driver for USB Serial Parallel Adapter

    Hello,
    I have a ThinkPad X100e with Windows 7 pro and I would like to connect an USB Serial Parallel Adapter (IBM).
    My system don't recognize this device and I don't find a driver for it..
    Can you help me ?
    Thanks
    Have a nice day

    http://forums.lenovo.com/t5/Options-Accessories/Us​b-to-Serial-Parallel-adapter-drivers-FRU-41A4955/m​...
    Read the last post on how to install it. See if that works for you.  I used it on an x32 with 7 ultimate and I'm running an old printer off of it.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Equium - Windows can't load the device driver for USB dongle

    I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
    what does this mean and how can i fix it?

    hi it's a vodafone 3gb cheap as chips dongle
    it's an equium a200 i think
    everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
    i know i sound completely stupid, but when it comes to technology i am!

  • Driver for USB Web-camera?

    I'd like to use a cheap web camera as an input device to Labview so that
    I can play with the image processing features.
    Does anyone have a driver for something like that? I've looked at the
    NI web site and I haven't found anything for USB. Lots of firewire, IEEE 1394,
    but no USB.
    Jim

    That's a joke, right? Very hard? Other that the very specific USB drivers
    that Iomega provides with their USB zip drives for WinNT, there are no drivers
    for USB for WinNT. There was some software developer down in India that
    allegedly had USB drivers for NT and like a fool I tried to use them. Zoowie,
    I get to reformat my hard drive. Complete and total system disablement (?)
    If you know of any USB driver for WinNT let us all know. I for one have a
    large financial and personnel commitment to NT and don't have any plans of
    switching to Windows 2000 any time soon.
    On Fri, 24 Nov 2000 12:05:53 +0100, "AIR Tech. Autom." wrote:
    >First, if your using Windows NT, it will be very hard to get USB to work.
    >
    >What we've done to get an image
    in LabVIEW, is this. We've made the PC a
    >webserver. We've used third party software to build a webpage with the
    >"webcam". We've used ActiveX to show the webpage in LabVIEW.
    >
    >Another way is: Use third party software to constantly update a .jpg. In
    >LabVIEW, check if the jpg is modified, load it, and display it. You'll get
    >some heavy 'flickering' this way.
    >
    >I've look at a way to use window API's to capture the image, but it isn't as
    >easy as it sounds.
    >
    >Regards,
    >
    >Wiebe Walstra.
    ===========================================================================
    SolidWorks Research Partner National Instruments Alliance Member
    Christopher Dubea Phone: (504) 847-2280
    Vice President of Engineering Fax: (504) 847-2282
    Moving Parts L.L.C. email: [email protected]
    P. O. Box 6117 URL: http://www.movingpart.com
    Slidell, LA 70469-6117

  • Need driver for usb serial bus controller

    the computer product number is QC455AV#ABA, usb device is listed as a Blackbeard product number is LR081AV.  The ID on the device manager is pci VEN 104C DEV 8241 SUBSYS 2AB5103C REV.   USB's not presently working. 

    Hi:
    You would need this driver for the hardware ID you posted...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-98056-1&cc=us&dlc=en&lc=en&...

  • Missing driver for usb port

    I received an alert to update my ipod software today which i accepted and i now no longer have a driver for my usb port

    SAME THING HAPPENED TO ME AND ALL BECUASE I WAS HELPING MY HUSBAND WITH HIS NEWER VERSION OF THE NANO THAT HE GOT FOR CHRISTMAS, NOW I CANT USE MINE!!!

  • Driver for VM3608A: DIGITAL-TO-ANALOG CONVERTER

    Hello,
    can someone help me to find a driver for the VXI-Card VM3608A? Im using
    Labview 6.02 and the VXI-Cards are running in a firewire-controlled frame.
    On which sites can i search for a driver?
    Thanks for your help.
    Martin

    Dear Martin,
    Many instrument drivers can be downloaded from NI by going to http://www.ni.com/devzone/idnet/ and selecting "Search for a Driver." In this case, the driver for the VM3608A is not available on the NI web site. This driver is available from VXI Technologies, the manufacturer of the VM3608A. You can download the driver by going to http://www.vxitech.com/download.asp and selecting the appropriate instrument driver.
    Regards,
    David Shatila
    Applications Engineer
    National Instruments
    www.ni.com/support

  • G550 AHCi driver for USB/Floppy/CD

    Greetings,
    Where can I download the AHCi driver for Windows 7 x64 Home Premium for this notebook please? Lenovo G550. I'm trying to install there Corsair Neutron GTX, and Windows 7 x64 HP is unable to see the HDD, I tried plenty of drivers, but I always get faulty size of SSD, so they must have been wrong,
    Please advise,
    regards
    Bryan
    Solved!
    Go to Solution.

    Well, I solved it by putting Corsair Neutron GTX into HP ProBook 4540s, installing windows there and than reassembling it into G550.

  • NI-VISA as default driver for USB device with another manufacturer's driver?

    Hi Labview Developers or AE,
    I have read the tutorial, "USB Control Tutorial Device" at link.
    I read a paragraph "If you do not know the USB vendor ID and product ID, to get them, plug
    the device into the computer and allow the computer to recognize the
    new device. Cancel out of the Found New Hardware Wizard if it starts.
    Open the Device Manager from the Control Panel and find your device on
    the list, usually under "Other Devices". It may show a yellow
    exclamation mark indicating it is an unknown device. Double click the
    device to open the properties. Select the Details tab and ensure that
    "Device Instance Id" shows in the attribute dropdown box. A string of
    characters will be displayed similar to Figure 3. The four characters
    to the right of "VID_" and "PID_" are your vendor ID and product ID,
    respectively. Write down the characters for your device, close the
    Device Manager, and unplug the device from the computer. Alternatively,
    you can contact your device vendor to obtain this information."
    I am wondering if it is okay to install two drivers together and do labview with two of them simultaneously. I am using Advantech USB-4716. I installed Advantech driver so that I can use Advantech-labview functions to control and measure. unfortunately, , there's no advantech function like reset.vi  in case of problem reading. So I wondering if it is okay to use NI-VISA driver by wizard as mentioned above and advantech-Labview functions together. I have not figured out  how to reset Advantech USB-4716.
    Pls  advise. Thanks
    Clement

    Hi Nicholas,
    I found the drivers in those links.
    First of all the customer must install our Device manager ( DAQ Tool ) and Driver
    http://support.advantech.com.tw/support/DownloadSRDetail.aspx?SR_ID=1-246K8V
    That's he needs to do always before using our devices.
    For LabVIEW he also needs to install in addition the LabVIEW driver
    http://support.advantech.com.tw/support/DownloadSRDetail.aspx?SR_ID=1-29WTFD
    It is the LabVIEW or LabVIEW DAQ , it depends on customer LabVIEW software that he is using
    After installation he will get in LabVIEW ready made VI ( examples ) to use from Advantech and also the Manual

  • Driver for USB 1608 G

    Hi everyone,
    I'm new on Labview and I want to acquire data from a usb 1608G from Measurement Computing. I can acquire data thanks to the ULx for NI Labview Library included in the usb 1608 G but I would like to use the Measurement & Automation Explorer...
    Unfortunately, it does'nt recognize the usb port... Is it because the usb 1608G is not a NI instrument? Is it because I don't have the correct driver?
    Thanks for your answers,
    Morgane CHARBONNEAU.

    Hello,
    If you have LabVIEW drivers for your usb device, why you want to use MAX for this?
    If you want to communicate using MAX, your device should fall in either USBTMC Class or RAW Class. Starting with version 3.0, NI-VISA supports USB communication for two classes of VISA resources USB INSTR (Test and Measurement Class) and USB RAW (class).
    More information will be available in http://www.ni.com/white-paper/4478/en/
    Regards,
    Naresh
    India LabVIEW Developer League member

  • Driver for USB 2.0 on Master2 FAR7 ?

    I am getting really slow transfers on USB and suspect I am running at USB 1.  Does anyone know where I can find the latest driver ?  I searched the MSI site but could not find it... I seem to have misplaced the CD that came with the board.
    BTW, my replacement MB came and everything is working fine now.

    I have 2 usb cables connected together making 30 feet.  That is the problem.  15 feet works fine, so i probably need to get an active cable instead of a passive one.

Maybe you are looking for

  • Main Front Panel Cluster reference in Sub VI

    If I create a reference to a cluster and then create a Sub Vi,  I can change the cluster variables from the sub vi. All works well - Until I modify the Cluster. This breaks the sub vi with a wire class error. Can I fix this ??? Solved! Go to Solution

  • Please help: After updating my iPad 2 to ios7 it will no longer sync with itunes

    Hi Can anyone help.  My iPad 2 has been updated with ios7 and now when i try and sync it with itunes (vs 11) I get this error:  "the iPad cannot be synced because the computer is no longer authorized for purchased items that are on this ipad".  When

  • How to delay stock confirmation during sales order creation

    We have following requirement - Whenever an order is created, even though stock exists, it should not confirm it right away. We need the delivery date to be current date + 7 days. This will help us avoid new orders consuming the stock. For example: O

  • VPN HW-1-PACKET ERROR

    Hi all, my customer is seen lots of errors shown below %VPN_HW-1-PACKET_ERROR: slot: 2 Packet Encryption/Decryption error, Output Authentication error:srcadr=y.y.y.y,dstadr=x.x.x.x,size=1392,handle=0x5BA7 %VPN_HW-1-PACKET_ERROR: slot: 2 Packet Encryp

  • Read textfile in JSP (Very urgent� Pls Help)

    Hi to all, I have a very urgent problem. I need a JSP to read a textfile (c:\abc.txt).and display in it to a space <in a body tag> in a HTML page. Does anyone have any idea? Thanks in advance. This is my HTML page. <html> <head> <meta http-equiv="Con