Driver for USB Serial Parallel Adapter
Hello,
I have a ThinkPad X100e with Windows 7 pro and I would like to connect an USB Serial Parallel Adapter (IBM).
My system don't recognize this device and I don't find a driver for it..
Can you help me ?
Thanks
Have a nice day
http://forums.lenovo.com/t5/Options-Accessories/Usb-to-Serial-Parallel-adapter-drivers-FRU-41A4955/m...
Read the last post on how to install it. See if that works for you. I used it on an x32 with 7 ultimate and I'm running an old printer off of it.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Hi!
I have USB Serial Parallel Adapter, where I can find drivers for Windows 2003 for it? Supported OS are 98,2000, but I have Windows 2003!Try your win 2000 drivers. Is this an IBM/Lenovo adapter or 3rd Party? you will need to go to the manufacturer's website.
T61p, T400
formerly x23, x40 -
Need driver for usb serial bus controller
the computer product number is QC455AV#ABA, usb device is listed as a Blackbeard product number is LR081AV. The ID on the device manager is pci VEN 104C DEV 8241 SUBSYS 2AB5103C REV. USB's not presently working.
Hi:
You would need this driver for the hardware ID you posted...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-98056-1&cc=us&dlc=en&lc=en&... -
HP laserjet 1200 using windows7, cabled to the printer with a usb to parallel adapter
HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, so the computer is cabled to the printer with a usb to parallel adapter. Sometimes works fine, sometimes system states printer as ready, but will not print. Reboot hardware and on restart, I got one page to print. Next attempt to print puts the document in cue, but just sits there -- no error message. Finally, after multiple restarts, I got it to print (have no idea how), but now I had to print 20 pages one page at a time. It will not print more than one page, even if I select to print 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, Or are the USB to parallel adapters undependable?
This question was solved.
View Solution.Hey renradd!
Unfortunately, parallel to USB adapters can be undependable. Other than a new printer, I'm not sure what would provide you with a fix for this problem. You might try another adapter if you have one, but if that still doesn't work I would look into a printer that your computer could support.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Trying to connect an HP LaserJet 4 using a USB to Parallel Adapter
I have tried a Belknap and a Tripp-Lite cable. In both cases my MacBook Pro "sees" the cable but not the printer. I have the driver I need. Each time I get 1 print. Any print jobs after the first get lost,requiring me to delete at the print queue. I wonder if I am neglecting to do something very basic here. Any ideas?
MacBook Pro,Mac OS X (10.7.2)I know I join this discussion late. I am just now upgrading to Lion in earnest and the old Laserjet 4M is the last hurdle. In this thread, I have not heard of anyone trying the usbtb CUPS backend driver for USB printing in Mac OS X. This and Gutenberg 5.2.5 has worked for me under Snow Leopard. It has also worked seamlessly with a Windows XP virtual machine that I run in Parallels Desktop.
I am using a generic USB to parallel converter cable. At the time I bought it, there was discussion about the necessity of a cable allowing bidirectional communication. This one apparently did, it was cheap, so I bought it and I guess I lucked out. Tomorrow I am going to the office where my 4M is located and I am going to test a Lion installation located on a firewire external drive that was a simple upgrade from a clone of my current Snow Leopard installation. I have the latest Gutenberg driver 5.2.7 to install and a new copy of usbtb.
Anyway, for those who are not using the usbtb driver, I think it is a necessity and you can find it through the usual search engines. -
Need Chipset Driver for USB support
Hi.
This Windows XP-SP3 PC has 4xUSB2 or 2xUSB3 on-board ports, and all have failed. All USB devices are yellow-flagged in device manager.
I have run SFC \SCANNOW and it runs to completion, and I have tried right-clicking on a yellow-flagged USB entry in Device Manager and selecting Update Driver, but that only results in the following dialog:
Cannot Install This Hardware
There was a problem installing this hardware:
Universal Serial Bus (USB) Controller
An error occurred during the installation of the device:
The driver installation file for this device is missing a necessary entry. This may be because the INF file was written for Windows 95 or later. Contact your hardware vendor stop
It has been suggested to me that I should try to obtain the Chipset Driver for USB support. Running Speccy reveals the following about the mainboard:
Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
Model MS-7267 (CPU 1)
Version 3.0
Chipset Vendor Intel
Chipset Model i945P/PL/G/GZ
Chipset Revision A2
Southbridge Vendor Intel
Southbridge Model 82801GB (ICH7/R)
Southbridge Revision A1
BIOS
Brand American Megatrends Inc.
Version V7.1
Date 9/02/2007
Can you help me out with this?
Thanks very much.
- Rosiehere you can find all drivers for your mobo:
http://www.msi.com/support/mb/945GCM5F_V2_FSB_1333.html#down-driver&XP 32 -
Driver for USB SB live! 24 bit exter
I left my CD at home in Hong Kong and now I'm in the USA, so would any body tell me where could I get the driver for USB SB li've! 24 bit external?
Thank you very much, I'm really sad as I just bought something new and can't use it.jkiang,
The driver is not available for download at the moment. You could check with Direct Sales Department if they have the CD for order. Their phone number is -800-998-000 and it is option #. They are open from 9:00AM to 6:00PM (CST) Monday to Friday.
Jason -
The driver (MacJet) for Belkin F5U002-MAC USB-to-parallel adapter?
I have a Belkin F5U002-MAC adapter, that connects between my USB port on my computer, and the parallel port on my printer. The adapter was originally designed by another company (CAI), who gave a driver for it, I think called "MacJet". Then CAI sold the product to another company (about 2000), who sold it to Belkin (about 2003). Belkin no longer supplies Macintosh drivers (although they do have Windows drivers).
We can I get a driver for this product?
Thanks.
--Mark
PowerMac G4 Mac OS 9.2.xHi, Don!
You done good to find that page! I tracked down all its leads, and I'm still out in the cold.
I gotta believe at least one person on this planet still uses the MacJet software, and would be willing to send me a copy. Now all I gotta do is find him!
--Mark
PowerMac G4 Mac OS 9.2.x -
Where can I find the USB driver for the serial to USB adapter?
I have a Palm IIIc with the serial HotSync cradle and USB adapter but I dont have the driver disc for it and was wondering if there was a page within the site here I could download it from?
The OS platform needed for the driver is Win2000 / XP.
TIA,
-guitardude
Post relates to:I did a Google search and found this link:
http://www.gilsson.com/usb_drivers_download.htm
It had the Prolific USB-to-Serial driver for WinXP. I downloaded & installed it. It created a COM5 port that my Palm Desktop found automatically. I hit the HotSync and, presto!, everything works perfectly. I only spent 5 hours trying to solve this problem for my dad.
He hadn't HotSync'd his Palm IIIxe to his home laptop since NOV2005!! And he hadn't HotSync'd to his work PC since he retired in JUL2008 (and he doesn't have access to that PC anymore).
I'll repeat this post in the other threads I queried on. I hope this helps someone solve their USB-to-Serial Adapter Driver problems.
-mark
Post relates to: Treo 650 (Sprint) -
Thinkpad T60/T61 Serial/parallel adapter kgdb support
Hi,
Does anyone know if the thinkpad T60/T61 serial/parallel bay adapter
40Y8121 supports kgdb ? It must be able to run even if the system crashes with
just the default minimal kernel serial driver.
Regards,
Sanjeev.I know several people who use this adapter for programming industrial robots or specialised measuring instruments which require a native serial port, all reports are 100% AOK
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
How to Format Toshiba Hard-Drive for Mac with Parallels?
Hello,
I recently bought a Toshiba Hard-Drive with the following features:
500GB
It is a Canivo Basics 3.0
It is USB 3.0 and 2.0 portable hard drive
It has already been formatted NTFS for Windows XP, Vista, 7, and 8
The box says that it can be reformatted for Mac
I have a Macbook Pro with Retina Display that I bought this year in late March/early April.
It runs OS X Mavericks, and Parallels Desktop 9 for Mac.
I would like to reformat it so that I can use it on my laptop both with Windows and Mac OS at the same time. I do not wish to use a partition as I want to access the hard drive through Mac and Windows at the same time on my laptop and I also want to be able to access the Mac things on a Windows computer and vice versa.
I have never formatted a hard drive before, and I would like to use a completely safe software, or no software at all, if it is possible.
I am sorry but I don't have a very high knowledge of this.
Thanks,
Sandy-WoodIt would be easier, using Parallels, just to format the drive for "Mac OS Extended (Journaled)". You can see it both in the Windows/Parallels and the Mac side. Leaving it formatted as NTFS is not going to allow you to access (write to) the drive unless you use third-party software. Formatting it for Mac lets you use it, as I said, on both the Parallels VM and the Mac side.
If you were using Boot Camp, I would advise leaving it formatted as NTFS and purchasing NTFS for Mac to access the drive on both OS's. You can mitigate that by formatting the drive for Mac:
Good luck,
Clinton -
Is there a driver for the thunderbolt ethernet adapter on a 2010 Macbook Air?
The thunderbolt ethernet adapter is not being recognized on my 2010 Macbook Air running 10.6.8. Is there a driver for it?
That's because there's no thunderbolt port on the 2010 MBair. You need to buy the USB ethernet adapter.
http://store.apple.com/us/product/MC704ZM/A -
Lion 10.7 - Proper driver for Dynex eSATA Expresscard adapter?
I just upgraded to OS X Lion today, and I'm having trouble talking to my external drive with my eSATA expresscard adapter. (see link below)
http://reviews.bestbuy.com/3545/8682393/dynex-2-port-esata-ii-expresscard-adapte r-reviews/reviews.htm
The adapter is detected as a "Mass Storage Controller," but I can't get any connectivity with my external drive. Has anyone had success with this/any expresscard adapter? Back to good ol' USB 2.0 for the time being I guess...
Thanks in advance!I can confirm that this driver (SLI 3132 ver. 1.2.5.0) is working for my Dynex 2 port e-SATA II ExpressCard Adapter.
(Link to Mac specific driver page)
I haven't done any super heavy lifting with it yet, but so far so good.
Will report back if I see any issues over the next couple days of use. -
Driver for universal serial bus controller win 7 64bit HP Envy 17t3000
Device Type: Other devices
Manufacturer: Unknown
Location: PCI Bus 0, device 20, function 0
Device Status:
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
Update Driver does not work
Please help! I uninstalled the drivers and hit delete files by mistake. Now my USB drives doesnt recognize anything.Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing issues with regards to the USB Ports on the Notebook
Please perform the below shown steps to resolve the issue:
1. Now from within Windows (I assume you have Vista or Windows 7) go into device manager and find the USB hub(s) right click and go into properties/advanced. You will have the option to reset the hub. Do it for all hubs and restart the Unit.
2. Go into the BIOS (F10) and restore to default settings. Reboot.
Please Click on the below shown link to download and install the USB driver if the issue persists still
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_132256_1&sp4ts.oid=6431933
Note: If this still does not work, then your option is to have the motherboard repaired or replaced or just get a USB external hub so you can have more ports.
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
Help: XP driver for 3000 G410 wireless adapter
Hi All,
My recently bought g410 came with Vistra (only) drivers CD, while I'm installing winXP instead. I downloaded drivers from Lenovo website and everything worked except the winXP driver for "wireless network adapter" (all 3 of them: Gemtek, 3xxx, & 4xxx), the adapter was simply not recognized.
When I look at g410 spec, it says something like "Wireless Network Type: InviLink 802.11BG", does it mean that it is another type of wireless network driver those available on Lenovo's site? If so, where can I get this driver? Can someone help, please?
Thanks,
fitro
Solved!
Go to Solution.Dear Silens,
Have tried to install the vista driver for Gemtek, and YES, the wireless thing is working now! Thanks for the feedback.
I notice that in the device manager, the device reads something like"Broadcom 802.11g" while from the specification, the wireless adapter should be 802.11bg (the letter "b" is missing from the description). I don't notice any performance issue though, however, would like to know if you have the same description as well?
Dear Rex,
I don't know how to start the system update software, do i need to download from any website?
Thanks,
fitro
Maybe you are looking for
-
SOAP sender adapter and XI adapter reusablity
Hi, We are having good amount of interfaces using SOAP sender and XI Adapters (WS to Proxy scenarios). My question is : we can make reuse of Sender SOAP and Rcvr XI adapters in all scenarios. If we reuse these adapters in all our interfaces what are
-
AIP-51505: 5084: XEngine error - Invalid data.
Hi All, I am getting invalid data error when posting a EDI 855 from BPEL to iB2B. I have done the following already: set validation to false and verified the XML against the xsd using XMLSpy. Any idea what can be wrong? Thanks in advance, Suresh 2007
-
A question about the multiple source table for the logical table
Hi All, I am to test, having two physical sources for an logical table, but it is failing as it is always getting data from only one table rather than two tables. !http://picasaweb.google.com/KSivaUS/OracleForumQuestions#5433761212378087346! Any sugg
-
How to connect utilize the optical drive in G4PowerPC to a 2013 intel Macmini?
How do I connect and utilize the optical drive on my G4 PowerPC Macmini with my new Intel Core i5 Macmini running 10.8.4?
-
Demand planning Forecast errors and KPI to store results of error
I have following requirement: keep traceabilitity of hypothesis and forecast error results of former mass process . In comparison tool, we can compare the result of last interactive forecast run but our requirement is to store those result for KPI pu