Driver I Have Never Seen Before
I just re-installed win 7 pro. But for some unknown reason I have a drive "F" that I never had before. It tells me that it has "Data" on it. But when I open the drive it's empty. I'm running RAID for my "C" drive, and my "D"
drive is data. I have no idea what this "F" drive is. How do I delete it, or remove it??? Suggestions??
Thank You.
Open Computer Management by clicking the Start button ,
clicking Control Panel, clicking System
and Security, clicking Administrative Tools, and then double-clicking Computer
Management. If you're
prompted for an administrator password or confirmation, type the password or provide confirmation.
In the left pane, under Storage, click Disk
Management.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Similar Messages
-
I have os x 10.5.8 and noticed a menu extra that I have never seen before. Is there a way to identify it? I tried to delete it i.e. comm + drag, didn't work.
If you can't CMD+ drag it off, try this...
You've probably got a couple of corrupt preference files.
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/<yourname>/Library/Preferences/ com.apple.systemuiserver.plist
/Users/<yourname>/Library/Preferences/ByHost/com.apple.systemuiserver.xxx.plist
where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).
reboot -
My phone started acting up and I noticed my text messages were not being sent. So I turned my iphone off. My iphone 4s turned off properly but when I went to put it back the apple icon came on and then an image I have never seen before of a UBS pointiing towards the word itunes in a circle. And the phone no longer goes beyond this message. I try to turn it off and on again and same message over and over. If I hit the any button on the phone nothing happens. Does anyone know what this means or seen this itunes messaging ? meltdown? Please help.
Hello Raja,
Thank you so much for your response. I had these photos backed up on iCloud but, had I not, its good to have an alternate solution as the one you suggested. Actually, I went to the Apple store today and yes, you are absolutely correct Restoring in iTunes will result in permanent loss of photos unless backed up somewhere such as iCloud or other solution. Well, what they did was restore the phone in itunes ( I did not have iTunes downloaded to my computer which is why it did not work when I went to do it myself, I needed to go to the iTunes site and go to the download iTunes button because my windows based HP laptop does not come with itunes already downloaded). This retoration process took a while and I was forced to upgrade to the latest 7.1 iOS software which I was not too happy about -sometimes you like the way things work now :-) Anyhow, they said this restoration request happens as a result of a software update (which I was NOT in progress of an update or doing an update) or sometimes when you remove the power cable too quickly from the iphone (which I do not recall doing this either but...). Since I had backed up on iCloud all of the photos were downloaded back on my iphone 4s. Best of all was that my phone was back up and runnning and there was NO CHARGE at the apple store for this service of restoring my phone. Well, I just wanted to share the results and I appreciate all the responses and support I received. Thank you kindly. -
I cant update my mac twitter app because it says i bought it with an apple id that i have never seen before. How do i update it?
Hi,
Your best bet at this point then is to contact iTunes Support and get them to straighten this out for you:
https://expresslane.apple.com/Issues.action
Select the options that best apply to your issue. You will have a chance to provide a written description before you submit. iTunes Support will get back to you via email, usually within 24 hours. Be sure to check your Junk/Spam email folder if you don't hear back by then.
They should be able to sort it out for you...
Good luck!
Cheers,
GB -
Something i have never seen before...
Hi
I have a compaq sg3-320uk with Windows 7 64-bit and every time i start it up i get green tetris like shapes appear on my screen or sometimes it doesn't boot up at all you just hear the fan working, I haven't added any new hardware to my computer it even does it when i do a full system restore. When i look this problem up it always comes down to faulty drivers but surely even if i reset it back to factory setting its should delete everything and reboot it back to when it was first created even tried my old hard drive with Windows XP on it still no luck from that, I love this computer does everything i want HD graphics it runs really fast i just don't understand what's going on. Also I took it back to PC world where i bought it from no help at all got it back and they said everything was fine (obviously not, my views have changed about them ever since...).
Hopefully someone here knows how to fix it and can help me.Lloydy, welcome to the forum.
Have you ever streamed a movie on Netflix or other video service? If you have, does it appear to be the same type of pixelation caused by slow connection? Once we know a bit more about the situation, we will try to help you solve the problem.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Help! I have an error I have never seen before
I have witten this rather long winded code, but I do not see any reason why it shouldn't work. the error report is as follows:
Thx in advance for any help!!
Error report:
ORA-06550: line 232, column 8:
PLS-00103: Encountered the symbol "LOOP" when expecting one of the following:
if
ORA-06550: line 237, column 4:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
end not pragma final instantiable order overriding static
member constructor map
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
end not pragma final instantiable order overriding static
member constructor map
and the code is
ALTER TABLE net_promotion ADD(promo_name VARCHAR(1024));
COMMIT;
--this is to insert AIMS from a txt file data string
DECLARE
fh UTL_FILE.FILE_TYPE; -- file handle to input file
input_line VARCHAR2(10000); -- line from input file
begin_time DATE; -- Time load began
end_time DATE; -- Time load ended
total_rows NUMBER:=0; -- Total rows processed
-- Variables for column contents
NUM_IN VARCHAR2(1024);
PROMO_IN VARCHAR2(1024);
CLIENT_IN VARCHAR2(1024);
PROMO_EXISTS_ASSET VARCHAR2(1024);
PROMO_EXISTS_PROMO VARCHAR2 (1024);
NUM_EXISTS VARCHAR(1024);
SUPP_EXISTS VARCHAR2(1024);
MIG_START VARCHAR2 (1024);
MIG_NUM VARCHAR2 (1024);
MIG_PROMO VARCHAR2 (1024);
MIG_END VARCHAR2 (1024);
MIG_CAT VARCHAR2 (1024);
MIG_TYPE VARCHAR2 (1024);
MIG_DESC VARCHAR2 (1024);
MIG_SUPP VARCHAR2 (1024);
MIG_TC VARCHAR2 (1024);
CLIENT_ID_IN VARCHAR2(1024);
AIM_INS VARCHAR(1024);
BEGIN
-- Open the input file for reading
fh:=UTL_FILE.FOPEN('DIR_TEMP','PROMO_NUM.txt','r');
DELETE FROM NET_PROMOTION;
COMMIT;
-- Get beginning time
begin_time := SYSDATE;
-- Loop through file, read one line at a time, and insert
-- into the database table.
LOOP
-- Get input line
BEGIN
UTL_FILE.GET_LINE(fh,input_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN EXIT;
END;
total_rows:= total_rows + 1;
-- Parse line contents
NUM_IN:=SUBSTR(input_line,1,INSTR(input_line,',')-1);
input_line:=SUBSTR(input_line,INSTR(input_line,',')+1);
PROMO_IN:=SUBSTR(input_line,1,INSTR(input_line,',')-1);
input_line:=SUBSTR(input_line,INSTR(input_line,',')+1);
CLIENT_IN:=input_line;
-- THIS NEXT SECTION PUTS VALUES INTO VARIABLES
SELECT SHORT_DIAL_NUMBER INTO MIG_NUM FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_TITLE INTO MIG_PROMO FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_START_DATE INTO MIG_START FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_END_DATE INTO MIG_END FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PRODUCT_CATEGORY INTO MIG_CAT FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_TYPE INTO MIG_TYPE FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_DESCRIPTION INTO MIG_DESC FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTIONCUSTSUPPORT INTO MIG_SUPP FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_TERMS_AND_CONDITIONS INTO MIG_TC FROM MIGRATE_PROMO WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT CLIENT_ID INTO CLIENT_ID_IN FROM NET_ASSET WHERE DISPLAY_NAME = CLIENT_IN AND TYPE='CLIENT';
--THIS NEXT SECTION FLAGS IF THE PROMOTION AND NUMBER AND CSR CONTACT ALREADY EXISTS, BOTH NEED TO BE TRU TO EXIST
SELECT 'TRUE' INTO PROMO_EXISTS_ASSET FROM NET_ASSET WHERE EXISTS
(SELECT * FROM NET_ASSET WHERE DISPLAY_NAME=MIG_PROMO AND START_DATE=MIG_START AND TYPE='PROMOTION');
SELECT 'TRUE' INTO PROMO_EXISTS_PROMO FROM NET_PROMOTION WHERE EXISTS
(SELECT * FROM NET_PROMOTION WHERE PROMO_NAME=MIG_PROMO AND PROMOTION_TYPE = MIG_TYPE AND PROMOTION_CATEGORY = MIG_CAT);
SELECT 'TRUE' INTO NUM_EXISTS FROM NET_ASSET WHERE EXISTS
(SELECT * FROM NET_ASSET WHERE DISPLAY_NAME = MIG_NUM AND TYPE = 'NUMBER');
SELECT 'TRUE' INTO SUP_EXISTS FROM NET_CLIENT_CONTACT WHERE EXISTS
(SELECT * FROM NET_CLIENT_CONTACT WHERE FIRST_NAME ='Customer Service' AND CLIENT_ID = CLIENT_ID_IN AND WORK_PHONE = MIG_SUPP);
IF CLIENT_IN =bonjour THEN
SELECT AIM_ID INTO AIM_INS FROM NET_AIM WHERE BUSINESS_ID ='bonjourts';
ELSE IF CLIENT_IN ='hello THEN
SELECT AIM_ID INTO AIM_INS FROM NET_AIM WHERE BUSINESS_ID ='hellots';
ELSE
SELECT AIM_ID INTO AIM_INS FROM NET_AIM WHERE BUSINESS_ID ='test';
END IF;
--THIS BIT SAYS THAT THE PROMOTION EXISTS AND SO DOES THE NUMBER, THEREFORE NEED TO JUST MODIFY THE LINKING TABLE
IF PROMO_EXISTS_ASSET = 'TRUE' AND PROMO_EXISTS_PROMO = 'TRUE' AND NUM_EXISTS='TRUE'
THEN
CREATE_PROMO_ASSET_LINK
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
ELSE IF PROMO_EXISTS_ASSET=NULL AND PROMO_EXISTS_PROMO=NULL AND NUM_EXISTS='TRUE'
THEN
CREATE_PROMO
NUM_IN,
PROMO_IN,
CLIENT_IN ,
PROMO_EXISTS_ASSET ,
PROMO_EXISTS_PROMO ,
MIG_START ,
MIG_NUM ,
MIG_PROMO ,
MIG_END ,
MIG_CAT ,
MIG_TYPE ,
MIG_DESC ,
MIG_SUPP ,
MIG_TC ,
SUPP_EXISTS ,
CLIENT_ID_IN ,
'PROMOTION',
'ACTIVE'
CREATE_PROMO_ASSET_LINK
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
ELSE IF PROMO_EXISTS_ASSET=NULL AND PROMO_EXISTS_PROMO=NULL AND NUM_EXISTS=NULL
THEN
CREATE_PROMO_NUM
NUM_IN,
CLIENT_IN,
MIG_NUM,
CLIENT_ID_IN,
AIM_INS
CREATE_PROMO
NUM_IN,
PROMO_IN,
CLIENT_IN ,
PROMO_EXISTS_ASSET ,
PROMO_EXISTS_PROMO ,
MIG_START ,
MIG_NUM ,
MIG_PROMO ,
MIG_END ,
MIG_CAT ,
MIG_TYPE ,
MIG_DESC ,
MIG_SUPP ,
MIG_TC ,
SUPP_EXISTS ,
CLIENT_ID_IN ,
'PROMOTION',
'ACTIVE'
CREATE_PROMO_ASSET_LINK
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
ELSE
CREATE_PROMO
NUM_IN,
PROMO_IN,
CLIENT_IN ,
PROMO_EXISTS_ASSET ,
PROMO_EXISTS_PROMO ,
MIG_START ,
MIG_NUM ,
MIG_PROMO ,
MIG_END ,
MIG_CAT ,
MIG_TYPE ,
MIG_DESC ,
MIG_SUPP ,
MIG_TC ,
SUPP_EXISTS ,
CLIENT_ID_IN ,
'PROMOTION',
'ACTIVE'
CREATE_PROMO_ASSET_LINK
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
END IF;
END LOOP;
-- Close input file
UTL_FILE.FCLOSE(fh);
END;Your formatted code. I've added couple of end ifs. That might not be the problem, but give it a try.
NUM_IN VARCHAR2(1024);
PROMO_IN VARCHAR2(1024);
CLIENT_IN VARCHAR2(1024);
PROMO_EXISTS_ASSET VARCHAR2(1024);
PROMO_EXISTS_PROMO VARCHAR2 (1024);
NUM_EXISTS VARCHAR(1024);
SUPP_EXISTS VARCHAR2(1024);
MIG_START VARCHAR2 (1024);
MIG_NUM VARCHAR2 (1024);
MIG_PROMO VARCHAR2 (1024);
MIG_END VARCHAR2 (1024);
MIG_CAT VARCHAR2 (1024);
MIG_TYPE VARCHAR2 (1024);
MIG_DESC VARCHAR2 (1024);
MIG_SUPP VARCHAR2 (1024);
MIG_TC VARCHAR2 (1024);
CLIENT_ID_IN VARCHAR2(1024);
AIM_INS VARCHAR(1024);
BEGIN
-- Open the input file for reading
fh:=UTL_FILE.FOPEN('DIR_TEMP','PROMO_NUM.txt','r');
DELETE FROM NET_PROMOTION;
COMMIT;
-- Get beginning time
begin_time := SYSDATE;
-- Loop through file, read one line at a time, and insert
-- into the database table.
LOOP
-- Get input line
BEGIN
UTL_FILE.GET_LINE(fh,input_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN EXIT;
END;
total_rows:= total_rows + 1;
-- Parse line contents
NUM_IN:=SUBSTR(input_line,1,INSTR(input_line,',')-1);
input_line:=SUBSTR(input_line,INSTR(input_line,',')+1);
PROMO_IN:=SUBSTR(input_line,1,INSTR(input_line,',')-1);
input_line:=SUBSTR(input_line,INSTR(input_line,',')+1);
CLIENT_IN:=input_line;
-- THIS NEXT SECTION PUTS VALUES INTO VARIABLES
SELECT SHORT_DIAL_NUMBER
INTO MIG_NUM
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_TITLE
INTO MIG_PROMO
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_START_DATE
INTO MIG_START
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_END_DATE
INTO MIG_END
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PRODUCT_CATEGORY
INTO MIG_CAT
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_TYPE
INTO MIG_TYPE
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_DESCRIPTION
INTO MIG_DESC
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTIONCUSTSUPPORT
INTO MIG_SUPP
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT PROMOTION_TERMS_AND_CONDITIONS
INTO MIG_TC
FROM MIGRATE_PROMO
WHERE SHORT_DIAL_NUMBER = NUM_IN;
SELECT CLIENT_ID
INTO CLIENT_ID_IN
FROM NET_ASSET
WHERE DISPLAY_NAME = CLIENT_IN
AND TYPE='CLIENT';
--THIS NEXT SECTION FLAGS IF THE PROMOTION AND NUMBER AND CSR CONTACT
--ALREADY EXISTS, BOTH NEED TO BE TRU TO EXIST
SELECT 'TRUE'
INTO PROMO_EXISTS_ASSET
FROM NET_ASSET
WHERE EXISTS (SELECT *
FROM NET_ASSET
WHERE DISPLAY_NAME=MIG_PROMO
AND START_DATE=MIG_START
AND TYPE='PROMOTION');
SELECT 'TRUE'
INTO PROMO_EXISTS_PROMO
FROM NET_PROMOTION
WHERE EXISTS (SELECT *
FROM NET_PROMOTION
WHERE PROMO_NAME=MIG_PROMO
AND PROMOTION_TYPE = MIG_TYPE
AND PROMOTION_CATEGORY = MIG_CAT);
SELECT 'TRUE'
INTO NUM_EXISTS
FROM NET_ASSET
WHERE EXISTS (SELECT *
FROM NET_ASSET
WHERE DISPLAY_NAME = MIG_NUM
AND TYPE = 'NUMBER');
SELECT 'TRUE'
INTO SUP_EXISTS
FROM NET_CLIENT_CONTACT
WHERE EXISTS (SELECT *
FROM NET_CLIENT_CONTACT
WHERE FIRST_NAME ='Customer Service'
AND CLIENT_ID = CLIENT_ID_IN
AND WORK_PHONE = MIG_SUPP);
IF CLIENT_IN =bonjour THEN
SELECT AIM_ID
INTO AIM_INS
FROM NET_AIM
WHERE BUSINESS_ID ='bonjourts';
ELSE IF CLIENT_IN ='hello THEN
SELECT AIM_ID
INTO AIM_INS
FROM NET_AIM
WHERE BUSINESS_ID ='hellots';
ELSE
SELECT AIM_ID
INTO AIM_INS
FROM NET_AIM
WHERE BUSINESS_ID ='test';
END IF
"-- Added end if here"
END IF;
--THIS BIT SAYS THAT THE PROMOTION EXISTS AND SO DOES THE NUMBER,
-- THEREFORE NEED TO JUST MODIFY THE LINKING TABLE
IF PROMO_EXISTS_ASSET = 'TRUE'
AND PROMO_EXISTS_PROMO = 'TRUE'
AND NUM_EXISTS='TRUE' THEN
CREATE_PROMO_ASSET_LINK(
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
ELSE
IF PROMO_EXISTS_ASSET=NULL
AND PROMO_EXISTS_PROMO=NULL
AND NUM_EXISTS='TRUE' THEN
CREATE_PROMO
NUM_IN,
PROMO_IN,
CLIENT_IN ,
PROMO_EXISTS_ASSET ,
PROMO_EXISTS_PROMO ,
MIG_START ,
MIG_NUM ,
MIG_PROMO ,
MIG_END ,
MIG_CAT ,
MIG_TYPE ,
MIG_DESC ,
MIG_SUPP ,
MIG_TC ,
SUPP_EXISTS ,
CLIENT_ID_IN ,
'PROMOTION',
'ACTIVE'
CREATE_PROMO_ASSET_LINK(
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
ELSE
IF PROMO_EXISTS_ASSET=NULL
AND PROMO_EXISTS_PROMO=NULL
AND NUM_EXISTS=NULL THEN
CREATE_PROMO_NUM
NUM_IN,
CLIENT_IN,
MIG_NUM,
CLIENT_ID_IN,
AIM_INS
CREATE_PROMO
NUM_IN,
PROMO_IN,
CLIENT_IN ,
PROMO_EXISTS_ASSET ,
PROMO_EXISTS_PROMO ,
MIG_START ,
MIG_NUM ,
MIG_PROMO ,
MIG_END ,
MIG_CAT ,
MIG_TYPE ,
MIG_DESC ,
MIG_SUPP ,
MIG_TC ,
SUPP_EXISTS ,
CLIENT_ID_IN ,
'PROMOTION',
'ACTIVE'
CREATE_PROMO_ASSET_LINK
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
ELSE
CREATE_PROMO
NUM_IN,
PROMO_IN,
CLIENT_IN ,
PROMO_EXISTS_ASSET ,
PROMO_EXISTS_PROMO ,
MIG_START ,
MIG_NUM ,
MIG_PROMO ,
MIG_END ,
MIG_CAT ,
MIG_TYPE ,
MIG_DESC ,
MIG_SUPP ,
MIG_TC ,
SUPP_EXISTS ,
CLIENT_ID_IN ,
'PROMOTION',
'ACTIVE'
CREATE_PROMO_ASSET_LINK
PROMO_IN ,
MIG_START,
MIG_NUM ,
MIG_PROMO ,
MIG_END,
MIG_CAT,
MIG_TYPE,
CLIENT_ID_IN
END IF;
"-- Added these 2 end ifs here below"
END IF;
END IF;
END LOOP;
-- Close input file
UTL_FILE.FCLOSE(fh);
END; Cheers
Sarma. -
I have a pb I have never seen before
The screen of my iPhone 4 is all black and there is only the always running on little round (like on the dowloading) It last already 1 hour, no way to switch of the phone of to make the central button work What to do please?P
The last action i did was to update in Settings something I was told to update and that's it
Noemie13Sorry Ralph it's me again.
Once all got Ok after your advice, I started updating various things and now again, the iPhone is showing only the Apple that disappears and popps out every some seconds. I am afraid sthg must be wrong with this present I've been given recently. Any idea? Thanks Noemi -
HT1420 I'm being asked security questions I have never seen before as I am trying to purchase apps
What to do re above.
Go to the Support button above right, connect to the Express lane, iTunes, Manage Account, then change password and security...content cannot be recovered so must be changed.
-
Wierd icon I have never seen before!?
I went to make a call today and noticed a wierd icon on my BlackBerry Curve 8330 screen. It only pops up when making a call. It is a rectangle that is half black and half blue. It looks like stars or "+" signs going diagonally accross the icon. It is located on the top right hand of the screen by the in-call volume icon. Any help would be much appreciated!!
Solved!
Go to Solution.It is the Enhanced Audio Boost indicator. You can change that by open your Call Log > Menu > Options > General Options and see the settings at the bottom of the screen.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
What does the ~ symbol mean next to an event? I have never seen this before but today when I edited a few events this appeared next to the event.
Greetings,
Hm. I've never seen that in iCal. In some other Applications the tilde "~" indicates a restore point or a before / after for a file. My guess is there is a broken cache file in iCal.
Try:
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
If that doesn't resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps. -
HT5577 why i have some security question that i never seen before?
I tried to change my password on apple id and i got some security questions that i never seen before..what can i do in this case?please help me
Welcome to the Apple Community Helen.
If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
G4 Blackout-Something I've never seen before; could be end of the machine
I have a Powerbook G4 that I use to run ProTools. Not the best machine for the job but it's served the gig well over the last year. The one thing was that it had always run kinda slow even on mundane tasks.
Since last weekend I've been trying to get it to run a little more smoothly.
I cleared out the hard drive, ran Disk Utility, Disk Warrior, checked Console Logs, etc etc etc.
After some research, I did an erase and install. I finished it up this morning. The thing ran like a dream. Restarts in well under a minute, fast operation, fast shutdown: just like a Mac should be.
Then I was back in ProTools, and the thing did something I have never seen a Mac do, ever.
I got a warning screen that ProTools was running out of CPU and that I should increase the Playback Engine settings, and then, before I could click out of the Alert message, the screen went black. The Hard Drives went down, and now the little rectangular white/blue light at the bottom of the monitor is calmly dim-flashing. Like HAL. I can't manually restart the thing. I can't shut it off. It won't respond to anything.
It doesn't look good.
Has anyone seen this before? Is there any way to bring the thing back?Hi there.
I'm not familiar with ProTools per se, but in general if a mac laptop is frozen like that, I pretty well always start with:
1) Take the external battery out. 2) Pull the plug out from the back of the laptop. (this will force it to shut down) 3) Press the power button for a few seconds (to completely discharge any power). 4) Let it sit there and think about what it's done for around thirty minutes (or sometimes longer). 5) Plug the ac adaptor back in; Press power; Then the "zap the pram" thing (apple key + option key + p + r) as it starts up (make it do the startup "bong" for 3 - 5 times; Then let it complete it's normal startup.
Then see where you're at...
In general, I find that OS X is happiest when it has at least 5gbs free of hard drive space to play with - Protools may require it to have even more free so it can do it's thing. Are you sure you didn't accidentally remove a file Protools needs during your own "cleanup"? Also, after I run Diskwarrior on an os x drive, I always then run Disk Utility to repair permissions afterward - Diskwarrior is a great fixing tool, but some of it's ideas on what the operating system really needs aren't quite what the mac os x directory doc has ordered. -
Cannot auto size columns in iTunes 10.4. Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns. Cannot order albums alphabetically by double clicking on heading.
Very many thanks to you, Putaro! Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
If you've got Jax installed, consider removing it before updating to iTunes 10.4.
My iTunes is now working right as rain, thanks again to Putaro!
-Jon -
HT201363 I have never seen the rescue email address i don't know what it is!
Okay so my apple id has asked me to verify my security questions, i made the id so long ago that i can't remember the questions! i was going to send it my my rescue email but i dont know what the email is and i have never seen the email address before! Is there a way that i can get a new rescue email address!? Thanks in advance!
Not without correctly answering two of the questions. You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102232) -
API design style I've never seen before - would you use it?
I was Googling for examples of a "Bean Comparator" and came across this strange API design I've never seen before (is it just me?). I'm curious if you have seen it before and what you think about it?
[http://cojen.sourceforge.net/apidocs/org/cojen/util/BeanComparator.html]
The basic problem is to create a Comparator that can sort on multiple fields within a given class.
First, a more traditional(?) API design might be something like:
Constructor Summary:
BeanComparator(Class theClass);
Method Summary:
addSortField(String fieldName, boolean isAscending, boolean isSortNullHigh);
addSortField(String fieldName); // convenience method with default ascending and sortNullHigh
So you could create a BeanComparator that sorts on multiple fields by using:
BeanComparator bc = new BeanComparator(SomeClass.class);
bc.addSortField("field1");
bc.addSortField("field2", false, true);
bc.addSortField("field3", true, false);Finally, without listing the API, the equivalent code for the "strange API design" would be:
Comparator c = BeanComparator.forClass(SomeClass.class)
.orderBy("field1")
.orderBy("field2")
.reverse();
.orderBy("field3")
.nullLow();So in this case:
a) there is no explicit "add" method to add a new sort field. The "orderBy" is an implicit add.
b) the reverse() and nullLow() methods only apply to the current orderBy field.
c) the creation of the class is "sequential" in nature as each method needs to be invoked in the proper order
In some ways this seems to simplify the API because you don't need lots of convenience methods or your don't need to use the full method and then restate the default values.
Also you can add new sort options to the API without affecting any existing methods.
What do you think of this type of API design?
Have you ever used it before?
Would you consider using this design and in what situations would you consider it?What part is bothering you exactly? Its not that it bothers me, its just that it is "different" and I was wondering if it is an acceptable design of a class and when you would use it, since I don't think I've seen any examples in the JDK.
Usually the order of method invocation is not important. You can do:
component.setFont()
component.setBackground()or
component.setBackground()
component.setFont()However
orderBy()
orderBy()
reverse()is not the same as
orderBy()
reverse()
orderBy()So the API implies a "building" approach where you need to know you are building the components of the class in a certain order.
Again, its not bad, its just different (to me) so I was wondering if it is common and when you would use it.
The fact that the methods return the object itself...No, I've seen that pattern before and find it handy.
Your example (addSortField) also depends on the order in which the methods are called.Yes, but this is normal for most APIs. For example adding items to a Vector, or components to a panel.
In this case the orderBy() method implies a change of state because the next set of methods may or may not modify the state of the field being ordered.
Again, I said I thought that this potentialy does simplify the API, but I have not seen it used before.
I don't see the design as much of a problem. Me either.
Maybe you are looking for
-
How to add a second row in an IRR report header
I have a report with 19 columns. Right now I have a bunch of columns that look like: 0-19 Males | 0-19 Females | 20-30 Males | 20-30 Females 24 22 16 17 I need it to look like: 0- 19
-
Help! I can't access my apple id. because it says my apple id doesn't exist. What do I do?
Help! I can't acces my apple id. It keeps saying my apple id doesn't exist. What do I do?
-
[JS][CS3] Script deployment question
Hi everyone, I am currently writing scripts in a corporate environment (~30 users), and I'm contemplating the easiest and most efficient way of deploying the scripts. We have a couple of scripts already with the users that are located locally on thei
-
Too high resolution of pdf file
Is it possible to decrease the resolution of a pdf file? And if so, how?
-
Hi Guys, Are the profit center postings real or statistical postings? The profit center derives the amount from the cost center. Where can we see the statistical postings or real postings on profit centers? Thanks Srik.