Driver installat

hi
I am a new audigy 2 zs user and i just wanted to know the proper driver update/installation procedure for creative drivers. For example install drivers on cd then eax 4 driver over that then .84.55 driver over that or just clean install of .84.55 or beta drivers are fine. it seems every way I install the drivers something goes wrong. also do i need to reinstall the software everytime i change drivers because when i uninstall drivers or update them some of the software does not function like the EAX console. also is there a new driver coming out soon that will solve the bf2 eax problems?
please help
thanks in advance
randomguy287

.84.55 driver require the initial installation of eax4 driver. Without this, .84.55 driver will not install. Eax4 driver can be installed on top of CD driver or as a standalone driver whichever you prefer. As for the beta driver, unless you have something specific that you wanted to try for example doom3, that the driver had some improvement on, I would not suggest installing any beta stuff.

Similar Messages

G510 audio driver installation problem on Windows 8.1

I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.
Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.
Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.
How can I say which audio chipset is installed and install the correct driver?
Solved!
Go to Solution.

hi mikolajek,
Welcome to Lenovo Community Forums!
Under Device manager
You should look for your Audio
Normally it stays under Sound and gaming controller,
And if no driver is installed in shows as High Definition Audio
Right click on it and select Properties
Go to the Details TAB
change the Value to Hardware ID then check the details
ex. PCI\VEN_14E4&DEV_4727&SUBSYS_051014E4&REV_01
Get the 4 digit after VEN and DEV
Ven is the Vendor and Devi is the Device
Go to PCI database and do a search for the VEN
Then search for the DEV and youll know that device
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP Laserjet PRO MFP M125nw; Wireless Driver installation problem in Win 8.1

Product name : HP Laserjet PRO MFP M125nw, product nr CZ173A
US Operating system: Dual Boot:   Win Vista home premium (32 bit) / Win 8.1 pro (32 bit)
The printer was installed under Vista in September 2014 and was and still is wireless printing and scanning without a problem.
Recently I tried to install the printer (wireless) under Win 8.1 and I downloaded the latest Full Feature software from HP.nl.
During installation the software installation package could not find the printer and installation was aborted.
I ran the printer self test / Configuration. The network Info and product info sheets were without errors. A ping to the IP address of the printer was without a loss. The firewall indicated that HP software is accepted.
Off course I read everything on HP about this problem I followed every advice and repeatedly gave it a try. I even installed the usb cable solution ( USB was working ok) followed by your change connection instructions, but all in vain.
To my surprise HP was able to find my printer when I checked on http:// www.hp.com/cgi-bin/hpsupport/index.pl. However the printer was found in my local network as a HP Laserjet Pro M1132 multifunctional printer with product nr stars 3NW-01 which is not correct, however the found serie nr. of CNB7G3RC78 was correct.
The print and scan doctor made some changes to the software and after that I was able to print wirelessly, however the Scan doctor button did not react at all and using the program was not possible further. Starting the program again gave the same result.
Conclusion:       In Vista: HP wireless print and HP wireless Scan is working fine
                        In Win 8.1: HP wireless print is OK, HP wireless Scan cannot be installed !????
                        In Win 8.1: Windows Printer driver and Win Fax& Scan driver both wireless working ok
Remark: Reading the display is difficult in dim lit areas. The on / off button is brightly lit and this light should be used to enlighten the display instead.
A solution for the scanning problem would be appreciated.
Kind regards
JWAH

Hi @JWAH , and welcome to the HP Forums!
I understand you're experiencing driver issues. I'd like to help!
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP LaserJet Pro MFP M125/126 Series Full Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP LaserJet Pro M1212nf Multifunction Printer Driver Installation Continuous Loop

HP LaserJet Pro M1212nf Multifunction Printe Driver Installation Continous Loop and No Installation
Thank you

ttb58,
At what point are you hitting this loop? What operating system are you running and what are the errors you are getting?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My d530 SFF, wont complete AC'97 audio driver installation. It Shuts down without warning.

I recently formatted my "hp compaq d530 sff" and installed XP sp3. Everything works fine except that there's no Sound from the Machine. When I try to install the AC'97 sound driver the machine shuts down just as it is about to complete the install. It then restarts itself still with no sound. what could be the problem?

Back up all data immediately as your boot drive may be failing.
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

HP Pavilion dv2718us Notebook PC - Driver Installation Failed for Auto:

Sound has gone on my laptop. Speaker icon with red circle & white X in toolbar. Says NO AUDIO DEVICES ARE INSTALLED. Downloaded new driver. I now get failed message - Driver Installation Failed- Could not find Media Device for this driver. What do I do now?

Hello @Geiss,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to get the sound to work on your notebook computer, and I would be happy to assist you in this matter!
To restore the audio to your notebook, I recommend following this document on No Sound from Speakers (Windows 8). This should help ensure that the drivers on your computer are correctly installed.
For further assistance, I will need to know:
If you can provide a screen shot of your Device Manager outlining this error message.
The Product Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If you have installed any new software or hardware recently to your computer.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

X220 device recognition and driver installation for Windows XP

hello all...i'm a newbie and am in a bind
we bought x220's (type 4287 2VU) with windows 7 installed. Our software application will not run on 7 nor in XP compatibility mode as we found out. We decided to create a partition and install XP Pro which we were able to do. XP does not recognize most of the devices like audio, wireless, bluetooth, monitor, LAN, touchpad and more. I have tried the directions in the Useres Guide but cannot get SP to recognize things to install drivers. Can someone help me out with what i am missing?
Lenovo is not helping as they will not assist nor support an XP downgrade at this time. We used a standard XP Pro SP2 CD to install and license and then installed SP3.
I have 3 days to fix things. THanks in advance.

If you created a partition and did not destroy the original Win 7 partition and have "Dual" boot, boot from window 7 and you can download the driver from: http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-77016
The same driver works for both Windows 7 and XP, and from here you can go the support site and download the balance of drivers, otherwise find a friend who will download the driver to fa lash drive for you. Some libraries will let you do this too.
Jim

Audigy 2 ZS Notebook: Blue screen at driver installat

After performing a cleansweap for previous drivers, I insert the card into the computer and start installing the drivers. Towards the end of the driver installation, I suppose once the drivers are being installed and communication with the device is happening, it blue screens.
Before installing I disabled the onboard audio in device manager and performed a selecti've startup to alleviate conflicts.
I'm at a loss, any ideas?

Well, after MANY attempts of installing, uninstalling, Disabling other devices, A crap load a failed restarts, some successful ones, I FINALLY got this stupid thing to work. Basically this is what I did after many experimenting, after my first failed attempt with a clean install of the newest drivers was this:
-Boot to safe mode uninstall failed driver install
-Restart, tried to reinstall... failed...
-Safe mode, uninstalled again, Disabled all my other media devices.
-restarted... installed drivers from the CD the card came with, no blue screen... go figure
-restarted... no sound... but no blue screen... Installed updated drivers
-restarted... twice... the first restart didn't take
-Presto! I got sound... now that was easy >.
-Re-enable all other devices
Hope this might help someone but this process was re-freaking-diculous... great job creative... my hat goes off to you.. meh...

Omega Personal DAQ 3000 driver installation w/LabVIEW 8.6

I cannot find the appropriate driver for the Omega Personal DAQ 3000 data acquisition system (model OMB-DAQ-3000) in labVIEW 8.6 . I have installed the LabVIEW driver off of the Omega cd, and updated the labview driver at ftp://ftp.omega.com/public/DASGroup/products/OMB-DAQ-3000/. However, I when I went to bring this driver into LabVIEW, I went tools->instrumentation->find instrument drivers-> From there I found the only NI certified driver to be omhctb3k, and I installed the driver version of this for LabView 8.0. When I then went to put this driver and associated instruments into my vi, it shows up only as a thermoregulator, and is only allowing me to use it for temperature applications.
I need to use this data acquisition system for pressure and displacement measurements, and am running on Windows 7. Any insight on how I can find the appropriate driver and get it to work with LabVIEW would be much appreciated.
Also, if I have not posted this in the most appropriate forum, please suggest one that will be of more help.
Thanks!
Solved!
Go to Solution.

Hey MCS11,
I think I either talked to you earlier this week, or someone else called me about the same exact thing.
Either way, I assume you downloaded the LabVIEW driver support from that link you listed. Your next step is to add this driver to your Function Palette in LabVIEW. In the instructions that you can find here: C:\Program Files\DaqIO LabView Support\Enhanced LabVIEW Getting Started.pdf it walks you through how to add these drivers to your function palette. I've copied the steps for you below.
1) Open a new blank LabVIEW.vi
2) From the Tools menu item select Advanced >> Edit palette views
3) In the “Edit Controls and Functions Palettes” dialog box select “New Setup…” from the Palette view list box.
4) Enter a name for the New Palete View
5) Right mouse click in an open spaceIn the function palette and select insert >> submenu.
6) From the “Insert Submenu” dialog select “Link to a directory”
7) Browse to the “C:\Program Files\DaqIO LabVIEW Support” directory and go into that directory.
8) Press the “Select Curr Dir” button. The DaqIO submenu should appear in the function palette. 9) In the “Edit Controls and Functions Palettes” dialog box Press “Save Changes”
The driver you found through "Find Instrument Driver" is a completely different driver which is why you are only seeing thermocouple VIs.
Hope that helps!
Kind Regards,
Allie F.

Satellite A665-S5186 Driver Installation

I have a Satellite A665-S5186 that had Windows 7 64bit preinstalled. I reinstalled a fresh copy of Windows 7 HP 64bit so that I could rid myself of all the presinstalled software easily and start with afresh copy of Windows, no extra software. I did this because I was having speed issues.
Now, I have done this on many desktops and laptops, for many years. I have never had this problem, but, the drivers listed for Satellite A665-S5186 are not installing properly. When I run the installer, it starts but then it never finishes. It basically loads the installer package and then stops. The only driver I can get installed is the System Driver. Am I installing the wrong drivers or is there a trick, or systematic installation path?
I do not have recovery media, or a recovery partition and I do not plan on buying recovery media since this should be solvable without recovery media.
Any ideas on how to get these drivers to install properly?
Already tried safe mode, safe mode with driver signatures disabled and compatibility mode for XP SP2 and SP3.

As a small update...
I was able to use WinRAR and extract each driver seperately, but I am still missing my LAN, Ethernet, Video, PCI Device and Unknown Device drivers. I have no idea exactly which driver to install for these, but have tried many of the ones listed. Maybe some insight into which drivers I need exactly would be nice too. Then I could try the WinRAR method.
Thanks ahead of time for any replies!

Mx driver installation...

Hi.
What components do you guys select when you install the mx driver? I mean, is the default selection ok if I want my program (Visual Studio C++ project) to run correctly or are the any unecessary components selected? Or do I have to select more components in addition to default selection.
I'm using NI USB-6210.
Cheers,
-J-

Hi:
You can try this one, and use the product key from the 32 bit W8 you bought and hope that it works.
https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1
Then use this tool to make the ISO bootable onto a USB flash drive or DVD. This tool works for the W8 ISO file too.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool

Driver Installation problem for Probook4530s

I recently got my laptop fixed and now i can not seem to access my bluetooth or use a wired LAN connection, i noticed that some of my drivers have been missing so i tried installing the drivers but they dont finish to install.
My Connection manager is saying bluetooth is disabled by device manager and there is no wired lan option being displayed, which drivers should i install to fix these two problems. I am running WIndows 7 Profesional 32-Bit and i have never changed it.

Driver for Wired LAN
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060884&sp...
Driver for bluetooth
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060884&sp...
There are multiple bluetooth drivers listed. Hence, if the above bluetooth driver doesnt fix the problem then you can find the exact driver by the device ID/hardware ID from device manager.
if unable to fix, buzz me in skype... mohammad.jahangir89

Zen Micro and driver installat

Running Windows XP SP2. Windows Media Player . Zen Micro with latest firmware (2.2.02).Have had this unit for a couple of years, been working fine, other than the software-driver installations have always been a pain in the you-know-what. Re-formatted puter a couple of months ago, did not re-install creative software. So today I decide to reinstall. First I used Control Panel to remove some Creative folders that were still in place for one reason or another. Then went to Creative's website, download latest drivers.Here's what I downloaded:CMS5_BRNR_PCAPP_LB_5_0_3CMS5_MTP_PCAPP_ LB_5_00_36CMS5_NJB2_PCAPP_LB_5_00_22CMS5_PCAPP_LB_ 5_0_38JB3MV2_PCWDRV_US_2_0_00ZCST_PCAPP_LB__04_06? I assumed I would need to install the driver first, which I did (JB3MV2_PCWDRV_US_2_0_00). Then connected zen. The "new hardware" thingy came up, went through the screens, pointed it to the jukebox folder which contained?two .inf files, and neither one would work. Get a message about the files not containing any device info.Going through the screens and pointing to the MTP device drivers gives me a message that the device may not be compatible, so I cancel.At this point, when the device is connected, it shows up in Device Manager as a USB device with the yellow question mark. Mediasource will not recognize it. I try some other things, surf through the support forums here, find a bunch of cryptic posts that, while related,?and after trying a few of the "suggestions", don't do anythinig to solve my problem. Went through the little things in Knowledge Base that creative tells you to do in case of this problem, which only lead back to uninstalling the drivers and reinstalling "by just following the prompts on the screen" (what a great help that is), which takes me back to the beginning of my problem without anything being resolved.So I drag out the original CD, install all the crap on there, and viola!...same problem. I downloaded and tried using JB3MV2_PCWDRV_US__30_03, same results. I'm now getting discouraged with Creative. I've killed two hours this fine morning trying to get this thing going. I have to tell you, your "support"?for this problem, and others, which from the amount of posts on the forums is not a rare one, is very lacking. It seems you have decided to put very simplistic solutions?on your knowledge base, but if the problem is a little more?involved, then you leave it up to the public in the forums to be the ones to figure it out! At this point, I am never going to purchase anything with the words "Creative" on them again!?Just tell me how to get this thing working again, in plain english. Please??

Now I am having the same problem. I too had a pc problem a few months ago and am now setting up a new/used pc.
I installed my Zen Nano software and my Zen Vision software but I could not find the Zen Micro Disk. So I downloaded the drivers from this site and installed them. Then I downloaded the new version 2 firmware while I was at it since I had an the version that did not support the audible.com books.
The firmware install seemed to stall for about 30 minutes, so I cancelled it and started again and the error message said that it "DOES NOT FIND ANY DEVICE" and yet Win XP recognizes I have a device attached.
PLEASE HELP US CREATIVE SUPPORT STAFF! I have had my Zen Micro for a few years and don't think it is fair that I have to stop using it becasue of this issue. It is only fair we get some timeley support here please.
Thank You in advance for your anticipated speedy reply.

Problem with proper driver installat

Hi. I purchased a SB X-Fi Xtreme Music sound card, installed all the things from the installation disk (I had to download it, I only got a disk for Windows Vista with my card) and downloaded the latest drivers from Creative's site. My problem is that every time I boot up my PC a message saying "New hardware found" pops up and Windows offers to automatically install the drivers. It shouldn't do stuff like that when I already have all the necessary drivers installed, right? So, how can I fix this? Should I let Windows install the drivers? I'm afraid that it might mess something up if I already have some drivers installed. Any help is welcome. Thanks in advance
EDIT: I forgot to mention that the card and all of its features seem to be working well. It just troubles me that there might be something wrong...Message Edited by 0rpheus on -0-200702:36 AM
Message Edited by 0rpheus on -0-200702:37 AM

Go to the player menu System -> Information. See the version numbder that's listed there. If it's showing version .xx.xx, go to the website and download the Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource (9.72 MB). Else if it's listed as version 2.xx.xx, then download Creative MediaSource Plugin for PlaysForSure devices (version .00.8) (23.98 MB) instead.
Jason

Audigy 2 zs driver installat

Okay so I'm trying to install new drivers for my audigy 2 zs soundcard. It does good until I get the message"Before you proceed with the installation, be sure that: no other application is running or acti've in your computer" I click ok and it keeps installing for about 2 seconds and then i get a message which says that I don't have any audigy 2 soundcard... anyone hwo can help?

karlozkiller wrote:
Okay so I'm trying to install new drivers for my audigy 2 zs soundcard. It does good until I get the message"Before you proceed with the installation, be sure that: no other application is running or acti've in your computer" I click ok and it keeps installing for about 2 seconds and then i get a message which says that I don't have any audigy 2 soundcard... anyone hwo can help?
If you have original installation CD then try install plain drivers st, by running ctzappx.exe found on Audio\Drivers\ -folder on your CD.
If it won't install, then search my previous posts, so you can find some more help.
.jtp

Driver installat

Similar Messages

Maybe you are looking for