Driver Issue when deploying custom image from SCCM

Hi,
I have a sysprepped wim file that I can deploy from a USB stick or via TS using an SCCM 2012 bootable media.
Perhaps one comment up front: I am not using SCCM to apply any drivers.
With USB deployment, everything is fine. When I deploy via SCCM, and login as an unprivileged user for the first time, I get an admin popup trying to complete the AMD graphic adapter driver installation. If I supply the credentials, or login first as an
admin, then everything is fine.
Updating the driver removed this problem/behaviour, but it left me wondering what the difference might be.
Since I have all drivers within the wim file and have a PE instance outside the control of SCCM that actually injects the drivers before rebooting and running mini setup, I cannot figure out why there might be a difference in behaviour.
Any ideas?

Well to be honest, I am trying to understand what is going on
In my opinion you should use ConfigMgr driver packages in your task sequence. This leads to less anomalies and "trying to understand what is going on" with your solution.
This leaves you more time to concentrate on the important stuff.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

I'm a new Mac user. I imported photos from my PC they ended up in iphoto library on the hard drive, but when I open iphoto from my dock its empty. How do I import those photos to the dock file?

I'm a new Mac user. I imported photos from my PC through a jump drive and they ended up in my iphoto library on the hard drive but when I open iphoto from the dock its empty. How do I import those photos to the dock file from the iphoto library?

Paragon Software has the most reliable NTFS driver for Mac
tips on importing and organizing, transferring from Windows etc
http://www.apple.com/support/itunes
http://www.ilounge.com

When I put apps from my PC to my iPhone it copies it but it doesn't install in my phone??? I just my iPhone 5s so when i put images from my laptop I cant delete them so can you help me??

When I put apps from my PC to my iPhone it copies it but it doesn't install in my phone??? I just my iPhone 5s so when i put images from my laptop I cant delete them so can you help me??

You might not have enough space on your phone.
Look on iTunes and see how much space the photos you copied over is consuming.

When converting an image from raw to jpeg , the jpeg can look flat compared to the original raw image . Is there anything I can do about this ?

When converting an image from raw to jpeg , the jpeg can look flat compared to the original raw image . Is there any way to prevent this ?

Hi Joe , Thank you for your quick response . I am viewing the jpeg in Microsoft Picture Manager and Flickr. It 's not always really noticeable , but for example if I shoot into the light with dew on the grass , the dew glistens in LRoom and I'm happy with the shot but when I convert it to jpeg ,it looks dull. I have changed the setting to sRGB - from Adobe 1998 ,but don't see much difference. Kind regards Alberto.

Since I downloaded the latest PSE12 update, when I download images from my camera into Organizer on my iMac, the application freezes.

Since I installed the latest PSE12 update, when I download images from my camera into Organizer on my iMac, the application freezes. If I "force quit" then it seems to download them, but will do nothing else, including verifying and deleting the images from my camera. It worked fine prior to the update.

Dear Steve--
You are the man--a true Apple genius. Your suggestion worked.
Thanks you so much.
Charlie Jarowski

Issue with Metadata when importing 30K images from Photoshop Elements 7

I'm a new mac user and am moving ~30k images from my PC to my mac. I have photoshop elements 7 that I use on the pc and am moving everything over to Aperture. I maintain all of my organization on the PC using "key words". I made sure to move all of the metadata over to the Mac with the images. However, I would say approx 5,000-10,000 of the images have the wrong Metadata. For example, a key-word "Vacation" is showing up on an image that should say "Christmas". This is just an example and it's creating major issues with my smart albums. The wrong images are in the wrong albums. Help!?!?

Hi Shellie
Is anyone familiar with PSEDBTOOL? I've been told it will do a good job applying metadata to files inside PSE but I'm afraid to run it and have it screw up my current library.
I'm not familiar with that tool. What I will say is that your caution is well founded. If you do try to run anything like that on the PC side, ensure first that you have a backup of any data that might be modified - and that you (a) know how to restore from the backup in case anything goes pear-shaped and (b) you've actually tested your backup (by doing a restore) and are confident with its integrity.
One other thought has occurred to me since earlier. Let's try a different tool...
– Locate one of your problematic master files - on the Mac side - as exported from PhotoShop Elephants.
– Open it in Preview. (It lives in the Applications folder.)
– Select +Tools > Show Inspector+ (if the Inspector is not already showing from an earlier session).
– Click on the Inspector icon which resembles a simplified traditional magnifying glass.
That displays the keywords in the file.
How do they compare with your expectations (from PSE)? How do they compare with what's showing in Aperture?
This won't solve the problem, but it might just shed some more light on the problem.
Regards,
Gary

Activation of Creative Cloud packages created with CCP 1.3 breaks when deploying via imaging

Descption of the problem:
If Creative Cloud products are deployed as a part of an OS image and the packages are created with CCP for Windows 1.3, the activation still breaks.
The problem affects most of our class room computers but, however, not all of them.
When a standard user tries to open any of the products, an error message is displayed instead of opening the the program.
Configuration error
A problem has occurred with the licensing of this product.
Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:19
Installed Products: Acrobat XI,Ai,Dw,Fl,Id and Ps
CCP version: 1.3.0, build 66
CCP Workstation OS: Windows 7 SP1 32-bit
Target OS: Windows 7 SP1 64-bit
Workaround: running APTEE on an resolves the issue every time. Yet according to Adobe this should not be necessary.
Deployment workflow
1. Create a single package containg all of the products with CCP and an Enterprise CC serial number.
2. Customize Acrobat .mst file for the target language with Adobe Customization Wizard XI, leaving the serial empty.
3. Create a batch file to run ExceptionDeployer in pre mode, install the the other products and finally run ExceptionDeployer in post mode.
4. Install the the package to a model computer using the batch.
5. Run Windows's built-in sysprep tool with OOBE and shutdown switches.
6. Capture the image from the model computer and deploy it to other computers.
We can unfortunately reliably reproduce this issue and we are, if not happy, but at least willing to provide you all the required logs and other info to find a real solution.

Hi PT_luas,
Please send me an email: [email protected] so that we may arrange a callbak.
Regards,
Romit Sinha

Border issue when creating custom text captions

Applicable to: Captivate 5
OS: Windows XP, SP3
I seem to be experiencing an issue that I cannot locate an answer too, there are various discussions within the forums related to custom text caption issues but nothing specifc to mine. I hope someone can help.
I am creating custom text captions for a project I am working on and have read & followed the help documentation related to customising text captions though I seem to be presented with issues displaying the border I have created.
Scenario 1
I copied the AdobeBlue1.bmp and associated .FCM from the Captions folder, created my own image based on the size of the .bmp and renamed the .FCM file then placed the 2 files into the Captions folder. Unfortunately the border on my custom image is not showing, all I see is the black background.
Scenario 2
I copied the AdobeBlue1.bmp and associated .FCM from the Captions folder, edited the image changing the colours of the border (green) and background (white) and renamed the .FCM file then placed the 2 files into the Captions folder. Unfortunately the border on my custom image is still not showing, all I see this time is the white background.
Can anyone tell me why this is happening and if there are any ways of controlling the border of the text captions within the Captivate UI? There are various output options when saving the .bmp as I am working in GIMP but I have chosen all of them and this still does not affect the border in anyway, I just cannot see it. Help please!
Thank you
Tom

Hi Rick
GIMP has various options for saving as bitmap and I needed to save as Windows 24 bit bitmap (default 32 in GIMP). I did as you mentioned and created in a new project and repeated the steps appropriately and that seems to be working great now! Thanks for your help on this one, though it's very pernickity (fiddly)!!!!
P.S. Formatting in text captions when using variables is a nightmare!!!! Raising on another post though.
Cheers
Tom

Issue when uploading Sales data from DSO to Cube.

Dear All,
I have an issue when I am uploading Sales data from DSO to Cube. I am using BI 7.0 and I have uploaded all sales document level data to my DSO. Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube. Cube has customer wise aggregation data.
In DSO I have NetPrice(KF) and Delivered_QTY(KF). I do a simple multiplication routine in the transformation from DSO to Cube.
RESULT = SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
Can someone please help me.
Shanka

Hi,
are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
but first verify if other key figures are also having the same issue.
Thanks
Ajeet

Quality issues when importing still images as frames for animation

hello,
i've imported roughly 600 hand-drawn and scanned (600 dpi) images as frames for video. the images themselves are really crisp and perfectly how i want them to appear. i've imported each to play for 2 frames then move to the next. once done, i save this video file as an .avi. i then repeat the process in order to layer the video (using Calculations filter) over and over again, to fill up the screen with overlapped, layered animations. in theory, these layers should all remain crisp, just like the scanned images. i was under the impression that the standard Export... > Movie... .avi file is essentially lossless and is best for editing, however when my process is completed, the final product is muddy, grainy, and pixelated. i'm not sure where i am going wrong, as i've actually done this process before with success.
is there a way to specific the working file as "high definition" or something similar so that the quality is just as crisp as the scanned images i am using as source
any help is appreciated - i am completely self taught in video editing and it is really bugging me that the file output is not how i envisioned.
thanks,
DB

I note you specified that the images were 600 dpi. The dot per inch are an issue only for printing a hardcopy. For video work, the issue is the pixel dimensions and the pixel aspect ratio. If your image is 600 pixels by 400 pixels with a PAR =1.0. If your sequence is 1440 x 1080 with a pixel ratio ratio of 1.33, then the images must be the same and PrPro must scale up the image. You can get good images from imported stills in PrPro. I prefer to rescale my images using Photoshop. I am told that the scaling algorithm in PrPro has been improved. But regardless, if you are scaling up, you will see degradation becauae Prpro has to interpolate between pixels to fill the video frame.

Issue with exporting the image from camera and scanner

Hello,
When importing JPG digital photos from my Conica Minolta SLR digital camera, the file size is typically 3-4 megabytes. If importing
and then exporting the file out of Lightroom 2.6, the size of the file is not changed (at least not very much).
However, when scanning 35 mm color negative films using a Plustek OpticFilm 7600i with SilverFast-SE the JPG file has a size of abou
t 5 megabytes (generated by SilverFast-SE). If I take this file and import it to Lightroom and then export it out again, the size in
crements to about 12 megabytes. What could be the reason for this?
Browser: Microsoft IE
Operating System: Windows 7
Scanner / driver version: SilverFast-SE v6.6.0r6
Has it ever worked? If so, what's changed? (provide comments in description field): Not Applicable
Same results with different file?: Not Applicable
Same results with different computer?: Not Applicable
Recent System Hardware or Software change?: Not Applicable
Regards
JPSingh

It is the compression settings on export that will define the size of an exported image from LR, the amount of compression applied will produce differing file sizes according to the type of image, the amount of sharpening and many other factors.. To compare actual file sizes (rather than compressed sizes) see what it says when in Lightroom or when open in Photoshop. Two images with the same pixel dimension can have very different file sizes when compressed. When open, in PS for instance, the file size will be the same for images of the same pixel dimensions and bit depth. .

Issue when Calling the RFC from external system

Hi,
I have created one RFC, in which I am using one function module to get the material customer status.
Functional Module name is "QC01_BATCH_VALUES_READ".
When I run this in SAP, it is giving a value for Cusotmer Status. But when this RFC is called from .Net system it is not returning any value for this field.
Even I used a different function module 'CLAF_CLASSIFICATION_OF_OBJECTS' for the same, in this also in SAP it is doing good, but when it is called from .Net, the program is giving dump.
Please help me to resolve this issue
Thanks
Ravi

Hi Ravi,
Issue can be either in the .NET program or in the RFC destination creation.
1)
Check whether data types of .NET program which is calling the SAP function module are correct.
If there are issues with data types, program dont report if you dont so explicitly.
2) Check whether RFC destination you are giving in your .NET program is correctly configured in
SAP , verify by testing the same.
Apart from above two reasons, I dont see any other major reasons for not getting correct results.
Regards
Krishna

Colour issues when Producing iBA assets from InDesign

Hi there
This is just a heads-up for those that produce any assets for eventual use in iBooks Author in InDesign. Watch out for colour matching issues. The RGB values in inDesign do not often produce the same colours in iBA. Why would someone be using InDesign in the first place? Well you might use InDesign to work out page layouts, or to produce the TOC backgrounds (so that Chapters can feature individual colour ways), or for creating images with text for use in HTML widgets. It's just quicker/easier at handling text and managing styles.
Anyway - here's the issue. Try this: Create an colour with a specific RGB value in InDesign, export it as a jpg, and import it to iBA. Then create a shape within iBA with exactly the same RGB values. The two colours may differ. We have tried selecting different colour management options in InDesign, and even turning it off completely, but the colours still differ.
We created an image in Photoshop with a certain RGB value. That looked fine in iBA, and had kept the correct RGB value (using the colour sample tool to test it). We took a .jpg exported from InDesign (with the same RGB value within InDesign), opened it in Photoshop, and although the two images in Photoshop reported the same RGB value, they were clearly different to look at. When the InDesign image was brought into iBA, it's colour sample tool reported a differing set of RGB values.
So, if you have some assets where you need a reliable colour match you have a few choices:
1) Don't use InDesign - use Illustrator or Photoshop
2) If you must use InDesign - then export the assets as RGB PDFs with no colour management, open in Photoshop and export to jpg from there.
3) If you're using colour ways, create the image from InDesign, but don't use the same RGB values that InDesign has to create elements in iBA. Sample the image using the colour sampler, and use the resulting RGB values to create your items.
Like I say - it's not really an Apple issue, but those who use iBA with InDesign are better off pre warned, so I thought that I would be better off posting it here than in Adobe's forums.

Publisher can create CMYK files, you go save as, then choose PDF, then click on Options or something and change it to Commercial Press. This is Microsoft's version of the Press Quality export setting in Indesign, with it converting all images to CMYK, downsampling to 300dpi etc.
NEVER EVER EVER USE THIS WAY TO CREATE PRINT FILES FROM PUBLISHER!!!!
Have I made myself clear?
The CMYK images created this way have a terrible sort of under colour removal. Think for example of a dark blue garment, where most of the garment is something like 100C 60M 0Y 60K, but in the shadows it goes darker than that, up to 100K. Well in that area of 95 to 100% black in the image Publisher will convert it to only that, with no other colours underneath it. But the areas surrounding it will be rich black. This won't show up on digital proofs, even hi res ripped inkjets, and won't even show up on a press pass unless the machine has drying, because it is not until the ink dries off that you notice these weird photos.... Anyway what I do has already been said above.
1. Refry it first.
2. You should be able to sync your settings.
3. No, it just thinks it can.
In this case I actually had the Publisher files as well, so I printed them to PDF using Acrobat, and the images were fine. Problem is the client had gotten used to text and other elements the way they looked using Publishers crappy CMYK export so I had to combine that with the proper images by cropping in Indesign..
Here's examples of what happens:
CMY channels only, BAD!
CMY channels only, GOOD!

Deploying Custom Image with Answer File

Hi everyone!
I'm in the process of making a custom image for ~25 computers, using WAIK (no network so no MDT, WDS...). I followed Technet's "Step-by-Step: Basic Windows 7 Deployment for IT Professionals", and installed from original Win7 Ultimate Retail
Media, with an answer file. Finally I customized that install and now have a properly set-up install, in audit mode and waiting to be generalized.
I'd like to deploy this custom install with an answer file/configuration set, in order to auto-install some drivers and hardware-specific apps, answer typical questions, etc...
But I must admit, I'm a bit unclear as to how to proceed from there. So I'm going to state how I understand it, and would love you to correct me where I'm wrong!
On reference computer, run syprep /generalize /oobe /shutdown
Boot to WinPE, capture image with ImageX
Open the resulting custom.wim in WSIM, generate a catalog file
Make Answer File + Configuration Set, copy them to the root of an empty UFD
Replace the Original Win7 Media's install.wim with my custom.wim, make bootable UFD
Deploy to other computers with the 2 UFD's
Does that sound right to you? Am I missing something? Also, should I be running sysprep with a /unattend:xxx.xml switch (not sure how that works)?
Bonus Question:
I'd like to use the Answer File + Configuration Set to perform some silent installs via script. Could you point me to a relevant Technet (or 3rd party) resource for that?
Thank you very much for reading ^^

If you are doing the "replace install.wim" option, then you are installing using Setup. In this scenario, Setup will ignore the answer file specified in the image with the /unattend switch with Sysprep. So it would be unnecessary to prepare the
image with that switch.
Awesome! Thanks very much for clarifying the use of the /unattend switch with sysprep =)
Anyways, I'd rather use an autounattend.xml in another UFD, which I can replace for any different hardware type, partition layout, etc...
Also, the "replace install.wim" method is the only one I know. Are there others I should be aware of?
Thanks!
Hi,
yes, the basic process is like what you said.
Here is a guide which contains the video and text to tech you how to do the deployment.
Deploy Windows 7 The Easy Way: Using WDS, MDT and AIK - Step-By-Step Video - See more at:
http://blogs.technet.com/b/danstolts/archive/2010/03/11/deploy-windows-7-the-easy-way-using-wds-mdt-and-aik-step-by-step-video.aspx
You could refer to this article. If you have any question about it, feel free to contact us
Thank you very much for confirming, and for this useful resource =)
I'll definitely give it a read once I get a proper domain up and running at the office.

Issue in using custom event from outreach

Hi
I have created a custom event and executed a scenario successfully for this custom event from ACC. But when I try to configure the same event from Outreach(BCC), I am able to see this custom event in the list of available events, but after selecting this event there is no option to configure attributes for this event, but I can configure attributes in ACC. My BCC version is 10.1.1
Edited by: 1002715 on Apr 26, 2013 3:06 AM

Dear Ankit,
Once the pricing procedure is downloaded, please maintain the document pricing procedure at service contract header level, and maintain the customer pricing procedure at business partner sales area billing data.
In spro, maintain the pricing procedure for the combination of sales area, document pricing procedure, customer pricing procedure.
Please crosscheck whether the condition table is active or not.
Regards,
Maddy

Driver Issue when deploying custom image from SCCM

Similar Messages

Maybe you are looking for