Driver issue? with docked T61, and 31P9490- IBM USB Travel Keyboard w/ UltraNav and sleep mode

Can someone from Lenovo please advise me on which version drivers need to be installed for the external keyboard and mouse, and/or the proper power setting(s) to use with this configuration so the machine will react and wake up from its nap with a Fn+F4 on the external keyboard?
T61 7658-CTO, 3GB RAM, Vista Business Ultimate. These are the external IBM/Lenovo devices used:
250410U     THINKPAD ADVANCED MINI DOCK
31P9490    IBM USB TRAVEL KEYBOARD W/ULTRANAV
31P8700     SCROLLPOINT PRO OPTICAL MOUSE
I have an issue with waking my T61 up from sleep mode while it’s docked and using the external keyboard, mouse, and monitor. When the machine is docked, the blue Fn keys or the Think Vantage button do not function on the external keyboard.
The external keyboard seems to be the same as the internal keyboard installed in the TP- which I thought would react the same as the internal keyboard when I installed the driver that it came with. I had hoped something this simple would be easier than it now seems.
Thanks in advance!
Cheers, Mark
Message Edited by masnider on 12-16-2008 03:33 PM
Message Edited by masnider on 12-16-2008 03:42 PM
Message Edited by masnider on 12-16-2008 03:42 PM

Thanks for the advice Izzy. After installing both sets of keyboard and hotkey drivers it does respond to most (but not all) blue Fn key combinations as marked on the external keyboard. The blue ThinkVantage button still does not respond.
Oddly enough, I am able to use the Fn+F4 key combination to put it into sleep mode and to bring it back out, but when the display comes back I have no control of the UltraNav pad, track pointer, or mouse. I had to open the TP cover slightly and use the pad to get past the login screen to the desktop.
Incidently, just after using the UltraNav pad on the machine as it was slightly open a couple of messages popped up onscreen involving the USB port(s). One indicated it was searching for a new device driver for a USB connected device, and the other indicated I could benefit from connecting the device to a high- speed USB port by unpluging the low-speed hub and connecting directly to an available high-speed USB port.
Interestingly, I don't have any external hub connected. It may have identified the docking station USB ports as low-speed, which I don't believe they are...any ideas for what to do with this new set of issues?
Thanks, Mark

Similar Messages

Issues with a T61 harddisk, UNMOUNTABLE_BOOT_VOLUME, cannot also get in the Rescue and Recovery

Dear Lenovo Support Community,
I have a T61 with XP pro on it. This is the history of my harddisk problems with it:
(the harddisk is HDD0 Fujitsu MHW21160BJ G1 and everything in laptop (HW and SW) are same as the factory sold one)
1. Unfortunately I had not made any recovery cd/dvd when the computer was healthy
2. Some time ago, after a crash, and during the chkdsk in the following boot up, harddisk showed 12kb bad sector
3. Due to more crashes and not being able to login once, went to rescue & recovery and only recovered OS to an old and healthy state. Kept my data, lost all the new programs installed but got the OS fine and running. --> I guess the bad thing that may have happened is that recovered OS may have used those bad sectors as well, but this is just a guess.
4. Problems, slow downs, the 12kb bad sector, issues kept coming back every couple or few weeks. Repeated the rescue and recovery OS installations another two times.
5. Few days ago, all was good, but needed to restart, but this time a blue screen came up with UNMOUNTABLE_BOOT_VOLUME. This screen comes up even if I try to go into safe mode, with networking, or even with only DOS prompt.
6. Tried to go to rescue and recovery (version 4), it took a really long time and was telling me that something wrong with the file \minit\setupapi.log and after a long long time that it got in the page for rescue and recovery, it was not doing anything by clicking on any of the buttons.
7. Took the hard out, connected it through an external enclosure to another computer, the main drive could not be read at all, I/O error, not distinguishable.
8. But the SERVICE drive was understood and I could even run chkdsk /F F:\ on it and it repaired the file mentioned above (\minit\setupapi.log).
9. Put the hard back into T61, went to rescue & recovery, this time the error on the file was not showing up, but since the step #8, I have not been able to get pass the initial screen of rescue & recovery. It doesn't go in at all.
10. Found it through Google search, the famous post on this forum about fixing the Master Boot Record. Got the little program, burned on a CD, went through all of its steps, finished as described in the famous thread, but I am not sure if it has been any help to me so far.
11. In few other occasions, connected the hard through the external enclosure to another computer and found online and used programs like Disk Doctors Windows Recovery Data and EASEUS Data Recovery Wizard and was able to just read inside both NTFS main disk and FAT32 service disk (windows can also read the service disk but cannot read the main disk). Using the free version of EASEUS, I could even read and save my personal data since my last backup, so I am good to even format the T61 hard but still I don't want to give up on that.
12. While the lenovo harddisk is in it, in a restart went to BIOS (F1) and ran the harddisk diagnosis, It said: "Pass: Controller Diag, Error code 0000: Read verification failed". And after the "Test complete", it gave a red message in the middle of screen that "<<< An error was found. Call for service >>>"
13. As mentioned in #1, I don't have Lenovo's recovery Windows XP CD(s) for T61, but I have some other windows xp installation CD's, I thought I can put them in CD drive, boot up from CD, and try to recover or repair the windows, It seems that they tell me there is no harddisk in your computer!! When I press "R" to go to recovery console, it tells me: "Setup did not find any hard drives installed in your computer."
My questions for dear members of this forum are:
1. Can I recover my T61 harddisk with the above description? It is being read nicely with the recovery programs, so it should have not been damaged seriously. Please guide me to other things that I can try?
2. I can see and read the Service part of the drive from Windows (no recovery program needed) while connecting the drive through external enclosure to another computer. Can I run a program from the Service part of disk and make those T61 Recovery CD and DVD?
3. If I purchase the Recovery CD(s) from Lenovo, would they be doing any magic or help in my case described above?
4. Can I make recovery CD(s) from another T61 laptop and use them for mine?
Thanks all for reading my long post and helping me. God Bless.
Best Regards,
AL_K

Step One: Install windows
Step Two: run system update
Step Three: Your done (optionally have a beer and relax)
Sorry, step three was a bit of humor I added.
Actually these recovery CDs were produced before the first T61 was made, probably in 2006. The T61 line was replaced in 2008.
You can activate with the code on your COA, I've done it many times, just make sure you do a full (new) installation, not an upgrade, from an oem disc.
If you do end up using the original product recovery disc set, your steps are more like this...
1. Install disc one... wait 30-60mins
2. Install disc two... wait 30-60mins
3. Install disc three... wait 30-60mins
4. Install disc four... wait 30-60mins
5. Install disc five... wait 30-60mins
6. Install disc six... wait 30-60mins
7. Install disc seven... wait 30-60mins
8. Install disc eight... wait 30-60mins
9. download latest service pack for windows and install (over an hour)
10. Install (replace old version) system update and run.
11. go to windows update and update several years worth of patches and hotfixes. (1-4 hours)
12. kick back and have a warm beer and cold pizza, if there is any left after I finished hours ago and celibrated already.
Also, after going through all that, you've not only installed windows, then replaced nearly the entire operating system, but you've also used valuable harddisc space to make several redundant copies of the outdated files, drivers and apps.
Please understand, I'm not saying the recovery discs are a bad design, they work great, and back in 2006-7-8-9 I'd happily go through all that work, but today all the stuff on them is to old so it's futile to go through all that. It would be really nice if Lenovo updated the install discs, and we could download the latest version to use, but they basically just leave them untouched after the model line is released, so nothing on that disc is newer then about 2006.
I'll also add that both George and I have done this well over 100 times each, so we wouldn't be suggesting this if it wasn't the best option, but in the end you'll have a working system no matter which route you take to get there, so the only question to ask yourself is...
Do you like your beer cold and your pizza hot
Good luck, and enjoy your endeavours
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

I am having a hard drive issue with code 4MEM/6/4000000:6x7a5db418. What does this mean and how do I fix it?

I recently ran the Utility Disk and was verifying the Hard Drive due to some permission issues and found a problem. It told me to run the application startup disk to do another diagnostic which I did. It confirmed there is an issue and gave me the following code = 4MEM/6/4000000:6x7a5db418. What does this code mean and how can I go about fixing the problem? Any wisdom with this would be greatly appreciated. Thanks!

the meanings to those codes are not made public and only Apple certified technicians have access to them.

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Yes, BUT...
... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

Audio driver issue with my HP Compaq DC7800 Convertible Minitower

Hello,
I am having an Audio driver issue with my HP Compaq DC7800 Convertible Minitower desktop PC.
A few days ago I have formatted my desktop PC and installed a new Windows XP Service pack 3. As I needed driver for my device I have managed to find all drivers except the one for my audio device. As I saw I have integrated audio on my motherboard, but drivers that I have found on a support site of HP (drivers download) none of them work and there are too many (I have also needed to download drivers for other devices form intel site but this is another issue). So, now I was hoping that someone can help me to find (finally) and install audio device so I can finish with installation process. I would be veeeeeerrrry thankful for that Thanks in advance.
This question was solved.
View Solution.

It does not matter . I have found the driver that I needed: ADI High-Definition (HD) Audio Driver - Sound Max
thx anyway

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because no longer in US

I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because the issue is registered to when i was in America and i require to pay the funds from an American source. Any ideas how i can resolve this? It wont accept my new card detail as im back in the UK. I think i have posted this in the wrong area but anyone got any ideas?
I have managed to change the rest of my accoutn being registered to the UK i think except this

Hi..
You can email Apple for help but the link is for the iTunes store not the Mac App Store. You've inadvertently poasted in the Using Mac App Store forum but that's ok. Billing issues are the same for the iTunes Store.
Click here > Apple - Support - iTunes Store - Contact Us
It wont accept my new card detail as im back in the UK
Your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

Hey guys ive got issues with my macbook pro that i bought not a year ago, and for the last week its just randomly restarting especially when im watching a video or using finalcut pro x can someone help me?

hey guys ive got issues with my macbook pro that i bought not a year ago, and for the last week its just randomly restarting especially when im watching a video or using finalcut pro x can someone help me?

What do you mean "Leave them my laptop again"? do you mean you have had it worked on before? for the same problem or a different one?
You need to take it in to Apple ASAP. No matter how long they have it, you want it fixed and fixed correctly.
top_cheese_1 wrote:
i bought it june 2012.. still on the warranty. i just didnt wanted to leave them my laptop again, but ok if you think thats what i should do..

Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

Hi, I'm having issues with my airdrop. I have looked in my finder perfrences and didn't see the check box for airdrop. I have a macbook air running on 10.9.4 Mavericks. Does anyone know how to get my airdrop back? Thanks.

Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having issues with MLBtv, when I switch on my ATV it no longer comes up as an option nor does vimeo or the iTunes store, i've tried resets etc and after those they appear. put the tav into sleep mode and mysteriously they don't re appear. Any ideas?

I am having the same issue but mine is with Netflix. And there are only 4 categories now on the main menue when there used to be 5. Something went crazy with ATV software.

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.

I am having issues with connecting to the store...the page just hangs and when I run Diagnostics it states that a secure connection could not be established.
I have contacted apple via email and tried all the steps they have recommended and it is still not working.
I have tried disabling my McAfee and that does not work either.
Anyone that the phone number to apple express so I don't have to keep waiting for them to email within 48 hours?
Thanks.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the secnd point an end point. The pen tool stays active and I either have to clic

I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.

artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Driver issue? with docked T61, and 31P9490- IBM USB Travel Keyboard w/ UltraNav and sleep mode

Similar Messages

Maybe you are looking for