Driver issues 0768 6vg at my wits end need help please
Hi
well im at my wits ends with this
need some help if pos
I've upgraded my lenovo n100 0768 6vg to windows 7 ultimate but am having lots of probs finding drivers for a few things
everything works fine otherwise though ( well so far at least )
not sure what the drivers are 2 just show as a system board device and the other is the finger print reader driver
if anyone has had this problem or knows were I can find out the the full list of drivers or a device manager over view pic would be help at least I could then work out what's missing or if there is drivers wrong as well to sorts them out at the same time
have tried the system updater but it don't seam to find anything even though it did correctly detect my system in the first place and the o/s in use
may thanks in advance
Thanks Duck3
spot on did have a look though most of those but couldn't make heads or tales of it was a late night
worked like a charm device drivers turned out to be the 1394 firmware forgot I even had one on there lol
other was the authentec driver should have realized it as never forget the pop up window every time you boot up
anyways
so all sorted
many thanks for the help
Similar Messages
-
Issue with 2504 WLC and 2602 AP. need help please.
Somehow the AP does not associates with the 2504 controller.
What could possibily be the issue.
Thanks in advance.
Anyway, Here is the log from the AP.
AP log
===========================================================
*Mar 1 00:30:35.551: %CAPWAP-5-DHCP_OPTION_43: Controller address 192.168.120.4 obtained through DHCP
*Mar 1 00:30:35.551: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:30:44.551: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:30:44.551: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'SNGNY-WLC1'running version 7.0.220.0 is rejected.
*Mar 1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar 1 00:30:44.551: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar 1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar 1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 192.168.120.4
===========================================================
show version output from the Access Point
=========================================================
AP0006.f6ec.be2a#show ver
Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 00:07 by prod_rel_team
ROM: Bootstrap program is C2600 boot loader
BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
AP0006.f6ec.be2a uptime is 33 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
--More--
*Mar 1 00:33:46.071: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Mar 1 00:33:46.171: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.120.98, mask 255.255.255.0, hostname AP0006.f6ec.be2a
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP2602I-A-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FGL1704ZC0Q
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.4.1.37
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:06:F6:EC:BE:2A
Part Number : 73-14588-02
PCA Assembly Number : 800-37899-01
PCA Revision Number : A0
PCB Serial Number : FOC165188Y4
Top Assembly Part Number : 800-38356-01
Top Assembly Serial Number : FGL1704ZC0Q
Top Revision Number : A0
Product/Model Number : AIR-CAP2602I-A-K9
Configuration register is 0xF
========================================================Blake's right. Your WLC is running 7.0.X code which does not support the AP2600. Check the Release Notes and look under Software Release Support for Access Points to determine what suitable firmware your WLC can support your AP.
-
During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.
"An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'". This is all followed by some more text and code HRESULT:0x80070005
Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
Anne MarieProbably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)
-
Having issues with low memory that is causing some of my apps to crash, need help please !!!
Having issues with low memory that is causing some of my apps to crash, need help please !!!
Is the device actually showing low memory errors?
What is really occurring?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried? -
my ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!
We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.
-
Hard Drive icon missing - Desktop folders won't open - Need Help!
I need help! I have a 400 MHz PowerPC G4 with 768 MB SDRAM, no DVD drive - was running OS X 10.3.9 quite happily. We became owners of a new iPod Nano - so we had to upgrade to 10.4.
(I'm writing this on my 800 MHz PowerPC G4 with 768 MB SDRAM, (also no DVD drive) that I upgraded from OS X 10.3.9 to 10.4.11 without incident.)
Installed 10.4 using a FireWire Hard Drive - installed software updates to 10.4.11 - ran Disk Utility - ran MacJanitor - ran DoktorKleaner - everything was working well.
Rebooted and the Hard Drive Icon had disappeared from desktop. Folders on desktop have all lumped together in the top right hand corner of the screen, and refuse to open.
Only programs in the dock still work - clicking on the Finder icon only gives the option to hide. New Finder Window does not work. Programs can be found in Spotlight, but if they're not in the dock they won't open. Trash won't open or empty.
I attempted to reinstall Mac OS X using FireWire, but now the Hard Drive is full and is telling me it will erase and reinstall. I need to save files off this computer now (Sadly no backup exists) before my wife readies divorce papers.
I tried using FireWire Target Disk Mode to copy files - with the 400MHz as Target I just get a spinning Beach Ball any time I click on the Icon. After far too long it opened up an empty window.
With the 800MHz as the target, the 400MHz does not show it on the desktop, so I have no way of copying files to it.
Anyone have some advice that doesn't involve a time machine?Whenever something starts going wrong with the computer I suggest you first boot from the installer disk, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. Then repair the permissions on your computer. You can also repair permissions from DU on your main drive while booted, but to properly verify and repair your drive you have to run it from a drive other than the boot drive.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
A few questions:
Was this a retail installer disc that you used to do the upgrade?
How much free space do you have on the computer?
Did you use the [PPC Combo updater|http://www.apple.com/support/downloads/macosx10411comboupdateppc.html] to get to 10.4.11?
Did you do all these updates in one single session or restart and check your computer had accepted them okay between each update? It is critical to repair permissions before and after each update otherwise the installers won't install fully and you end up with a mix of versions.
You can set the Finder Preferences, general, to display a hard drive icon, but it sounds like your problems are going beyond that?
You can also try trashing your Users -> home folder -> Library -> Preferences -> com.apple.finder.plist file and see if that clears up the issue. That sets the Finder preferences and if it gets corrupted it will cause Finder problems. -
I apologize in advice if this story is discombobulated or more information is needed to provide me with an answer. I will do my best to provide as much details as possible, but this is a problem that has been occuring for the past few weeks and some things I've forgotten the specifics of.
I will start by explaining that my iMac specs are:
Processor 3.06 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Version 10.6.8
I've owned this iMac since about April of 2010. I've never had any problems with it until recently. At one point in time, I had a Boot Camp partition made in order to install Windows, as I wanted to run some games that weren't available to Mac users. After awhile, I eventually bought a Windows Laptop for my gaming needs. When this happened, I decided to erase previously stated Boot Camp partition in order to free up more space on my hard drive.
After a few months, had major issues involving a trojan virus on my laptop, it destroyed my hard drive, and I wasn't able to buy a new one at that time. Recently decided to try and create a new Boot Camp partition to reinstall Windows. When I attempted that, (I apologize, I don't remember the specific error) it wouldn't allow me, and from what I remember after doing some google research, it sounded like somehow my hard drive had become disorganized, and needed to somehow be reorganized.
At some point in my google research I found that using the Repair function in Disk Utilities would possibly help. When I tried that, (the only reason I know this is because I tried just now to get the error to pop up) I'm given a message "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
So here I'm thinking, "okay! No big deal! I have the disk still, I will just back up my hard drive to an external hard drive". So I buy an external HDD, back up everything I need. I then put the disk in, and my optical drive spends some time thinking, then spits it back out. It does this repeatedly. I do some more google research, find that optical drives crapping out on mac users isn't all that uncommon. I try to clean it with a trick someone suggested. I then tilted my iMac to one side, it accepts a cd! I try it again, and I'm no longer able to trick my iMac into reading disks. Sad face.
Instead of hefting large sums of cash at Apple to replace my optical drive, I buy a far more affordable external cd/dvd drive that is working perfectly fine. So after waiting for that to be delivered, 3 days later, I'm excited to finally get a clean install with my OS X drive. At this point, I care little about repairing, and have decided to just completely clean install. I restart my iMac, boot from disk, and I get the spinny thing for about 20 minutes. I think, "hmm... should it take this long?" So I reboot and try again. Same thing. I then let it run overnight, and wake up to spinny thing. When my Mac is on, it reads the dvd just fine. It just won't boot from it and let me start the clean install.
So then I get the idea maybe I can do a remote install of the disk from my friend's macbook. No such luck, won't seem to recognize anything. Then I see that I can make a copy of the disk image to my computer, and burn that image to a partition made on my external HDD, so that I can boot from that. Well, the only info I could find was a gentleman burning a downloaded version of OSX Lion, but I figured, "hey, its the same thing, right?" I guess not. I tried copying the image using the restore function in Disk Utilities, and it does indeed show up when I hold Option at start up, but booting from it does not start up properly. It starts up like any normal time I restart. I'm thinking its cause the way I copied it didn't involve a .dmg file.
So I try to copy the image to a file on my computer, but when I do that, I get some sort of input/output error.
What can I do at this point? I thought I originally set up Time Machine but when I checked recently, no such luck. All I want is a fresh reboot of my Mac. I'm guessing somehow my hard drive became corrupted in some way. I mean, it truly doesn't seem to be affecting anything, except somehow even after deleting all known movie, music, game, etc. files, I still am using up 270 gb of space. Maybe I never un-did the Boot Camp partition properly and kinda screwed myself on this one.
I've tried just about everything. I never invested in Apple Care, but even had I done so, I think it would have exceeded the warranty, as I had thought it was 2 years. I could be wrong, either way, its water under the bridge now. I need to fix this myself. I'd still like to use my iMac for general use, and to utilize the 1 TB of storage it possesses.
Any help is greatly appreciated, sorry for the wall of text, its been a complicated few weeks. Thanks!Whew... never buy an iMac or Laptop from Apple without the 3 year extended AppleCare... well 2 years extended... & I think they should be called on this, they should come with a 5 year Warranty, with more available if you want.
I think, "hmm... should it take this long?"
No way, Houston, we haave a problem, not sure what... RAM, Logic Board, etcd.
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Report outcome please. -
New hard drive issues - need help please!
So I just installed a new hard drive on my Ideapad S10 and having the following issues. I get a PXE-E61 : Media test failure check cable & PXE-M0F : Exiting Broadcom PXE rom message. I've uninstalled and reinstalled the drive to check the connection and still get the error, it's a brand new drive. Also I noticed in the BIOS that the hard drive is showing up under ssd disk and SATA hdd shows - none. If I restore the BIOS settings to original then the drive will show up under ssd but the SATA controller mode will show the AHCI setting instead of the Compatible setting it should use.
I'm really stuck here and don't know what else to check. My orginal drive is dead so I'm trying to get this working so I can install windows. If anyone could help out it would be greatly appreciated - Thanks!Full Disclosure: I don't know your machine.
That PXE error probably doesn't indicate a problem - or not the problem, anyway. Your machine boots, doesn't see an operating system on the hard drive (or doesn't see a hard drive at all) and tries to boot over the network and fails. That's what the PXE error is about.
As to the SATA problems, what happens when you boot your Windows install media? Does that see a hard drive?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Major Issues with installing 4tb internal. Really need advice please
In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
Any info would be greatly appreciated...
Deskstar 4tb internal info which is installed in Bay 2
3tb Seagate which I trying to retire and transfer from.
Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
(Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).What OSX version?
Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
http://forums.macrumors.com/showthread.php?t=1661024
http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive -
Video Playback ISSUE WITH VISTA!!!! NEEDED HELP BADLY!!!!!!!
I am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.
-Nick.Do you have a SATA hard drive? I have the same problem you describe when trying to play videos in iTunes. Do the previews of music videos on the iTunes web site play OK? If they do you probably have the same problem with SATA HD and iTunes incompatibility. Not sure who is going to fix that problem and when. I have found one fix that worked for me. Copy your video(s) to a flash drive and then play them from there. It's a workaround and you shouldn't have to do it but it does allow you to watch the videos.
-
Ipod Classic 160GB having issues, need help please?
I am on vacation away from my home computer where my iTunes is. I turned on my iPod and scrolled down to Music and it showed "No Music." Went to "About" and saw that there were only 9GB of free space, so I felt for sure it was there because that's right at what I had when I last synced it, which was a couple days ago and it finished syncing with no problems. Went to the next "About" screen where you can see how much Audio, Video etc. etc. you have and it showed 0 Audio and The "Other" category had all the data in it. What happened to my music, and can I get it back on vacation without my iTunes on my computer at home? I tried the holding down of the Select middle button and the Menu button until the Apple logo appeared but that did not restore any Audio. Hope someone can help me out here.....Thanks
Solved my issue and thought I might do someone a favor by posting the answer. If you wind up with NO MUSIC and find all your audio files have been synced into the OTHER folder on your iPod such as what happened to me, AND if you happen to be unlucky enough not to have access to your computer where your iTunes program would allow you to re-sync your iPod, here's what worked for me in a Windows7 OS.
1.You will have to find a computer that has enough storage to hold the amount of information stored on your iPod. In my case, 139GB!!! Download iTunes if it is not already on the system, or if it is, update to the latest software.
2. Plug your iPod into one of the USB ports.
3. Open iTunes if it does not open itself.
4. Select your iPod from the menu on the left and you should get a message that iTunes cannot read the iPod. Simply close that box. If you get a message that syncing your iPod will erase all content then decline the sync.
5. Open Computer and you should see your iPod as an external hard drive.
6. Open it and you will see some folders and a few files. The folders will likely look like they are a washed-out yellow instead of a deep yellow like you're accustomed to seeing. That threw me initially because as I was looking for the folder with @ 139GB, it was not there. Right click each folder, go to Properties and check the "Show hidden files" in the View menu. After that, the folders will appear dark yellow and as you hover over each one, you will see one that will have the full amount of data that was on your iPod before the mess started. Open that folder and you will see a bunch of other folders with strange names, like F00, F01 etc. etc. Do the Edit, Select All, right click and in Properties, View menu, check the Show Hidden Files again. All the folders that were that light yellow color will now turn deep yellow. Be sure to select show hidden files not only for the folder but all sub folders and files box that will come up....forgot to mention that earlier. Now all your folders and the files in them will be readable by iTunes.
7. The folders will all still be selected. If not, select them and then do either a copy/paste into iTunes Music Library or drag them over into that pane. The process will begin and likely take quite a while. In my case, several hours. When it is done, you will see all your music in iTunes along with the album art if you had any.
8. Now you will need to sync your iPod to that library, but before you do, you will need to Restore it. Simply select it from the left menu and click on the Restore iPod option. That will only take a few minutes and it will wipe your iPod clean. Before you do that, it is a good idea to MAKE SURE YOUR MUSIC IS ALL THERE!!! I also went to about a half dozen of the albums and tried playing a few songs just to be double sure. Proceed with the Restore, and when it is complete change the iPod name that will be in the small box on the same page as the Restore option and likely be something like"karens iPod" (whoever the computer belongs to will be the name there) to exactly what your iPod is called on your iTunes on your computer that it was originally synced to. I found that before I did this, it would not sync.
9. When you hit Sync, be patient because it took a minute or so before it actually began to sync. Then, it will be another few hours if you have as much music as I did for the sync to complete and depending on the speed of the computer you're using.
That's how I got all my music back and I am now a happy camper/listener again.,
I called Apple support and they were absolutely no help. Just told me I would have to re-sync to my iTunes even though I kept telling them that was 1,650 miles away at my house and not going to be possible. I even asked if the above process would work and they said they didn't know but "You could try it....." :-( At that time, I didn't have access to a computer with enough hard disc space on it yet so I called the Apple store in Louisville, KY which was 65 miles from where I was hoping that they might be able to help. After 2 calls and getting hung up in the same loop of menus that left me on hold for over 20 minutes long distance, I gave up and concluded that Apple and Support are two mutually exclusive terms and have no relationship to one another. This has been quite a nightmare, and if anything good has come of it aside from having my music back, it might be the learning process but I really feel that is a rather small reward for the time spent!
Not likely to be an Apple fan when considering my next purchase of home computer, laptop, nor the phone I am preparing to buy.
Hope this has helped someone.
Fishead -
I just bought a macbook pro yesterday (13 inch) from the Apple Store due to my old 2007 macbook (the 13 inch white one) running slow because of the applications I used. I transferred the old files, and backed all of them up on the 500gb G-Drive external hard drive using time share. I gave the computer to a friend of a friend and no longer have it. When I first turned the new computer on, it gave me the option to restore using a back up disk, like my g drive from timeshare. I chose that and it said it had worked fine. But when I got to the home screen, I couldn't find any of my files. The old computer didn't have lion, it was operating on Snow Leopard. I am trying to figure out how to get my files to show up on my new computer. When I click on my g-drive on my desktop, I see my backups, but all of the folders have the red circle with the negative sign in the middle. I was told to go to disk utility, click on the g-drive and click repair disk, so I did. Still, no progress. I tried using migration assistant and my g-drive wasn't showing, the only icon it showed was the Macintosh HD with the timeshare symbol laying on top of it, I tried doing it that way, again, didn't work. I know how to use a mac, but as far as the technical side, I am truly a beginner. I don't know what to do. I talked to 3 different people from Apple Pro Care over the phone yesterday and they were just as confused as I was. One of them told me that Lion doesn't have Rosetta Stone, so Snow Leopard files cannot transfer into Lion...is this true? I looked up my permissions on my old macbook settings and it said "No" on allowing permissions. If I was told to change it to yes, I would have done that before I gave the computer away. I was on the new computer for over 6 hours yesterday trying to recover my files, still nothing. Can anyone please help?!?! I am really frustrated and lost, any assistance would be greatly appreciated...THANK YOU in advance!!
oops, time machine, not timeshare, lol
-
Date/time stamp issue when transferring vids/pics to computer. Help please.
Hi, i am having an issue when transferring my vids/pics from my Z2 to my PC.
On all my previous phones when transferring media to my PC it would be copied and labelled with a date stamp followed by a picture number- an example being 2014-01-13- 0123. This has always made organising and finding my pics/vids in there relavent folders an eay task.
The problem i am now faced with is when i transfer pics/vids from my Z2. The pictures are stamped with DSC_0001 for example and the videos with MOV_0001. This means when on my PC i have to examine each file individually to find out its date and time of origin.
Even more of an headache is everytime i have transferred files from my Z2 and then take more pics/vids and then try to transfer them to my PC the computer will not allow transfer as the stamp on the file i am transferring from my Z2 eg - DSC_0001 is already present on the PC from a previous transfer. This means i have to rename all the PC files first.
I hope this makes sense and hopefully there is an easy fix.
I am new to Android and overall i am very happy with the operating system, being a massive improvement generally over my previous phones. Fingers crossed this is down to my lack of knowledge and just involves a settings change somewhere.
Thanks in advance for any help.Hi.
The case you described is right. But it´s not a bug.
Why don´t you organise your pics/vids on your desktop with picasa for example. There you have many tools, also to rename your files, so that the filename contains the creation date.
Or you use a cloud solution like dropbox, google+ or amazon clouddrive to sync pics/vids from your phone automatically.
But never use the built-in sony playmemories. It´s really slow, pics are down-scaled to 1280x720 and vids are not synced. It´s the worst cloud-service for pics I´ve seen.
Best
arni -
Mac/PC Font Issues in Flash -- Need Help Please
Hi,
I have an fla file that I need to update but I am having the font issue that occurs between Mac & PCs.
I need to export a swf file from an fla file I have. If I send someone the fla file and the font file (Futura Book) could you please export it for me? Someone with a PC? My letters keep getting cut off and I've tried to play around with the spacing already.
Thank you!!!!
AllieI don't know the answer to that one but you can use the Mouse Over and Click method I have described on this page....
http://www.iwebformusicians.com/Tricks/MouseOver.html
It works in IE.
Its just a question of making up two different buttons with text for each link, taking a screenshot and cropping them and adding the JPEGs to your upload folder.
You can make up the buttons on an iWeb page and then delete them when you have taken the screenshots. I usually do this sort of thing in Keynote so that I can save them in case I need to modify them. -
Need help please!!!!!!! cant boot into hard drive
hi every one!!
i´m a new macbook user. it was working great, but i wanned to boot an ubuntu live cd. i tried presing "c" at startup and it didint work. so i went into macosx an changed the boot option from hard drive to cd. i restated the macbook with the ubuntu cd and it worked. i just wanned to see how it runned linux, i didint move with linux anything from the hard drive. i restarted, ejected the ubuntu cd and now the macbook gives me a grey screen. i tried presing "x","h","shift","option" and nothing hapens. i can hear the sound when i turn on the power, but i cant see the grey apple and the loading spinning wheel. after a few seconds a message apears "no bootable device -- insert boot disk and press any key". i didint move anithing else from the macos x 10.4 just that option. i also didint install anything from linux(just a live cd).dont have any macos cd.
how can i get back into macos x 10.4????????
please help!!!i would suggest HOLDING the option key down before pressing the power button. you shouldn't need the install disks to do that. also, i would suggest reading the manual at apple.com before trying anything else with the boot order
Maybe you are looking for
-
I've been following (roughly) the simple virus scanner interface that SUN provides, and adapted it into a slightly heavier weight filter that interfaces with libclamav. At first both were compiled using GCC, and I thought due to some of the weird pro
-
How do I remove Rotten Tomatoes from my Apple TV?
I hate movie reviews, movie ratings, people telling me what's good, what's bad. In a nutshell, I hate seeing Rotten Tomatoes. Why was this automatically added to Apple TV without an option to turn it off? How do I get rid of Rotten Tomatoes from the
-
Question: I can't figure out what I'm doing wrong and would so appreciate help.
I really need help! I took on a project to produce free of charge an online publication for a non-profit nature club as they could not get anyone else. My background is in communications but not at the design or layout level. I bought InDesign and a
-
Title says it all, I use a phone service that is simply a run off of Sprint. I have it running on my Sprint iPhone 4s that is not unlocked just fine, and I was thinking its a good time to upgrade. So, am I able to just walk into my local apple store,
-
i am trying to use iringtones on itunes but it isnt appearing on the left hand side of the toolbar, how do i get it to work?