Driver istallation problems; win 7 64 bit; Error I-001

Hi guys,
hope u can help me.
When I try to install the driver for the X-FI Titanium I get the Error- Message I-00 and in the next window the message:
"DoInstall fails to launch C:\Windows\temp\CRF003\CTXInst\Setup.inx. DoInstall return error code is -2472332"
I tried to paste the file manually. It doesnt work.
I tried to dlelete all of the driver files with driver sweeper, driver cleaner pro and reinstall the driver with no success.
Anyone of u an other idea how to fix it's
Thx
Daniel
SB: X-Fi Titanium
driver vers.: 2.7.0007
OS: Windows 7 Professional 64 Bit
Socket: P45

Hi Daniel747, try to Download and install the latest DirectX SDK, then retry to install it. If that doesn't work just PM me.
Sincerely Jelges

Similar Messages

Download Lightroom on New Hard Drive Win 7 64 Bit Error Can't Use Original Serial Number

Hello
I am attempting to reinstall Lightroom 5 on a new hard drive after my old one crashed.
I am using the original download file which I have recovered from the old hard drive.
When entering my serial number for Lightroom I am receiving a message saying "This is an upgrade serial number. The serial number from your previous version of Lightroom is required."
I did not upgrade from an earlier version of Lightroom; I purchased the full version of Lightroom 5 and I only have one serial number. I was wondering if you knew what the problem might be here.
Thanks

Hi Davidbopper,
The full version serial number should not throw up this message.
I would request you to go through the link below and check in case you might have purchased any previous version serial key.
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Regards,
Anand

Photoshop CS5 64 bits Workspaces problem (Win 7 64 bits)

Hello.
Top bottom menu window at right of the screen starts minimized everytime I launch Photoshop, although workspaces (default and personalized) have all the windows maximized.
Is any other user experiencing the same problem?
Although I deleted, bring back the default ones, and created new workspaces, the problem persists.
Please see screen captures attached, thanks.

Try this:
1. Restore the Photoshop window (i.e., click on the middle caption button, so that Photoshop is a window that is NOT maximized).
2. Get the panels looking the way you want them.
3. While the app is still Restored (NOT Maximized), close and reopen Photoshop. Are the panels still the way you want them?
5. If so, maximize Photoshop.
6. Close and Reopen Photoshop. Are the panels still proper?
I've noticed that something is saved when Photoshop is in Restored view that is not saved when Maximized.
-Noel

Flash Player plugin problem - win 7 64 bit - Firefox 15.0.1

I have problems with Ff showing flash videos. Flash player is version 11.4.402.278 (latest that I could find). The videos play without problems when having Firefox in "safe mode". I've tried to figure out if there is some of extensions that's causing the problem but any of extensions do this. I checked them one by one, without solution. So, only cause I can think of is the default theme of Firefox, because it is disabled in safe mode.
Tried also Flash 10.3, but it did nod work either. How can I test in normal mode, if it's the default theme that's causing the problem?

Hi 2cv6,
try to [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems#w_turn-off-hardware-acceleration Turn off hardware acceleration in Firefox ]and "disable the hardware acceleration" in the Flash Player too :
http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
(in safe mode hardware acceleration is disable)
thank you

Update error - win 7 64 bit, error C:\Windows\TEMP\IXP173.TMP\itunes64.msi not found cannot uninstall

Tried using control panel to remove older version, then tried to manually erase all directories and files, neither has worked.

See Troubleshooting issues with iTunes for Windows updates, in particular note 1.
tt2

I have a Z570 laptop Win 7 64 bit and need a new mouse driver

I just updated my Ethernet Driver on my Win 7 64 bit Z570 laptop. Now, the icon for my Mouse no longer appears in the sys tray, and I can no longer scroll using the Mousepad. In order to scroll, I have to go into control panel and open up the Mouse settings, and then the icon appears in the sys tray and I can then scroll. In MSCONFIG, I have normal startup checked. I have the Synaptics PS/2 Port TouchPad, with driver 15.2.7.0 dated 2/8/11. I guess I need to update the Mouse driver. Anyone know of a fix for this, or can you point me to where I can find a better Mouse driver? Thanks.

Hi jetjim2015,
Even though you have the current Lenovo driver loaded, if you want to try the latest Synaptics driver (V 17.0.19) you can find it here:
http://www.synaptics.com/en/drivers.php
Make sure you read this NOTE on the page:
"NOTE: Installing a generic driver may result in the loss of OEM-customized Synaptics pointing device functionality. Setting a restore point before installing is a quick way to rollback to the previous driver."
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

LASERJET 5000 AND WIN 8 64-BIT

Hi...I have come upon TWO Laserjet 5000s in working condition. I seem to be having driver issues involving Win 8 64-bit. I downloaded the UPD that's supposedly for Windows 8 64-bit and installed it. The PS version does not list a 1200 DPI option. The 5000 is connected to my computer via ethernet into the JetDirect card. My computer is acting as the gateway with IP address x.x.x.39 and the printer is at x.x.x.40. I configured it manually for that address/gateway and it took. It prints a test page fine from the "printers and devices" screen in Windows 8 64-bit. I am also having trouble because I have put legal paper in tray 2 or 3, but a setting in the driver makes the printer constantly ask me to put plain LETTER size paper in tray 1. Yes, I configured trays 2 and 3 properly for legal and the word document is in legal size. I can see a 1200 dpi option if I install the PCL6 driver from Windows update, but that setting in the driver keeps saying "fit on letter size paper" And the 5000 PCL 6 driver I used from Windows Update never seems to install properly. I keep seeing that "The driver is not installed and some properties will be unavailable" but I can print a test lage I have yet to find a duplexer, though! ;-( What am I doing wrong here?? I bought these printers to do duplex printing at 1200 dpi for music. Any advice more than welcome!! Thanks.Jim Williams

Right--but there is a setting in the "EFFECTS" area of the PCL 6 driver that resets itself automatically to "print on letter," regardless of paper size. Nothing I do on the PCL 6 driver (from Windows Update) will prevent that setting from resetting itself. Here's what I want to do for now using Windows 8 : 1. Print at 1200 dpi out of PS or PCL 6--UPD does not seem to allow for1200 DPI out of Windows 8 as far as I can tell. Windows PCL 6 driver allows for 1200 DPI but has a host of other issues. 2. Figure out how to get rid of that automatic reset to "print on letter" I described above on the PCL 6 driver. 3. Figure out whether I will be wasting money on buying a duplexer for use with these Windows 8 drivers. I can't test, since nobody I know has a duplexer I can borrow. 4. Find a method to install the PCL 6 driver so Windows 8 quits telling me "it isn't installed so you won't have all the properties available." I'd like to have the driver install, and I'd like all properties to be available.

Will Win 8.1 drivers work if formatted to Win 7 64 bit?

I am really fed up with Win 8.1, i want to degrade it to Win 7 64 bit ultimate. Can anybody confirm me of the Drivers in SwSetup in C drive work in Win 7 64 bit?

Hi: You should be able to use the W7 x64 drivers and software (except the BIOS and firmware files) from the 15t-p000 on your model. http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-pavilion-15-p000-notebook-pc-series/6936226/model/7174371 To install the graphics on your model you need to: 1. Install the Intel chipset installation utility and reboot. 2. Install the Intel HD graphics driver and reboot. 3. Install the nVidia graphics driver and reboot. Make a note of what model wireless card your notebook has, so you can install the correct wireless card driver as there are several model wireless network drivers listed.

Networking printer problem Win 7 64bit driver won't connect with win 32 bit

HP 1320 installed on Win 7 64 bit with driver 1320 PCL 5 won't let win xp 32bit computer connect. It's looking for NT print file. I followed instructions to open a local port and it connects, but only prints blank pages.
New HP Computer found the printer driver which is different number PCL 5 from the original PCL 6. So I loaded PCL 5 on xp computer. Still won't print.
Someone please give me a fix for this. I posted this message on the troubleshooting page but got no response.
I need HP support on this, PLEASE.

Hi wiry11,
HP LaserJet 1320 is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Envy dv6 7398ca. win 8 64 bit. During recovery disk 4, get 3f0 error

Hi,
I have a brand new HP Envy dv6 7398ca.win 8 64 bit. I had a problem that caused me to do a system refresh. After that, Windows update and MS Office would not update/install. Talked to Tech Support, they wanted me to go thru every service and started task to see if one was corrupt (requires reboots and update and recovery from win Update). Anyway, decided to do a system recovery/system reset. I had recovery disks and files backed up, so thought I should be fine.
During Recovery (from Win 8, recovery manager) when disk 4 was inserted, it gets to 56% and then stops with the 'dest drive not connected' msg. The system hangs and have to power off. Tried a couple times, then went to sys reset. got to disk 4 again and then 3F0 msg with 'boot device not found, install os on hdd'. did quick check on hdd, all ok. Am running a full check now, but takes 5 hours(geesh, like back in the 80's again).
I can't believe the hdd is bad, because it goes through format, and 4 disks of loading files ok, and keeps stopping on the same spot.
Any ideas, before I finish waiting the 5 hours (1tb drive). Any ideas for after it finishes the test (I'm betting it's okay).
Thanks so much!

Hello socalfun64,
You’re getting an error 3f0.
Here are steps that Big_Dave wrote that might help with the problem.
The below solution may correct this problem:
Download UEFI Shell x64, rename the file to shellx64.efi, move it to FAT/FAT32-formatted USB-flash. Label the USB flash drive something that you will quickly recognize.
Insert the USB flash and then power up the HP UEFI enabled laptop and tap the ESC key to allow you to display the Start up menu.
Select Boot device Options (F9)
Select Boot from EFI file
Select the USB flash drive and hit enter
You should now see Shell.efi. Hit enter.
Ignore all the screen information that scrolls down on the screen
Once in the shell enter bcfg boot dump to see current boot manager entries. Option 00 should be the hard drive or SSD, option 01 the USB drive (UEFI) and option 02 the Internal CD/DVD Rom drive (UEFI)
This posted HP document will give you some ideas on how to remove, reorder and add the entries in the EFI boot manager. Review #3
If you’re not able to correct the problem, you may have to send the laptop in for repair.
Here is a link to a number to call HP and see what options they have to repair the laptop.
Let me know how everything goes
Have a good day.

Undocumented problem solved with 16-bit pcmcia and irq error

I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

V570 problem with Intel onboard driver on Windows 7 Pro 64 bit

Hello Everyone,
I recently installed Windows 7 Pro 64 bit on my Lenovo v570. I downloaded the drivers from the support page and I have a strange problem with the onboard graphics driver "Intel Onboard Graphics Driver for Microsoft Windows 7 (64-bit) - Lenovo B470, B570, V370, V470, V570" in the drivers section.
Installation seems fine, but after restart, the system fails to boot and goes into boot recovery mode, where I get a message saying that booting failed due to a bad driver and the only actual option I have to boot up is to go back to a previous restore point. I tried installing the Nvidia driver for Windows 7, but it says that I need to install an Intel driver first, which is the one that gives me the blue screen when booting. I have also tried installing both drivers without a restart between both installations, but that didn't help.
I am wondering if anyone in the community has seen something similar. Any advice, information or assistance will be highly appreciated. Thank you very much in advance for your time.
Best regards,
Moe.
Solved!
Go to Solution.

Welcome to the Lenovo Community !
Check out the link I have posted below for video driver installation problems on your model. The suggestions offered have worked for others.
http://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/V570-video-drivers-don-t-work-with-Windows...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5

On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5   Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

Apparent problem with Ovi Suite and Win 7 64 bit

Hi
Apologies if this has already been covered, but i have searched quite thoroughly and i haven't come across the specific problem i'm querying.
I'm running Windows 7 64 bit, with PC Suite 7.1.51.0, which runs just fine.
I intend to upgrade to the superb N8 when my contract comes to an end in 6 months, so i'm just doing my homework.
Apparently, the N8 will only run on Ovi Suite, NOT PC Suite.
Now if anyone disputes this and can convince me that the N8 works perfectly fine with PC Suite, then read no further, please just respond! (Bear in mind the OS i'm running though).
As nice as Ovi Suite is, i've managed just fine so far with PC Suite.
Otherwise, please let me explain the problem i am having:
I installed Ovi Suite 2.2.1.23. When i run it, it shows the main screen, and you can just make out a small window appearing in the middle saying "Nokia OVI".
It is then that the program stops responding, eventually displaying the error message which reads:
Runtime Error!
Program: C:\...
This appication has requested the Runtime to terminate in an unusual way.
Please contact the appication's support team for more information.
Judging by the similar stories of Ovi crashing (not finding one where the program fails to open, though), i think it is related to the fact that i'm running Win 7 64 bit; but i could be wrong.
I have tried installing it in compatibility mode, then (failing that), running it in compatibility mode, all to no avail.
Is this a problem that Nokia know about? If there is an intended fix within 6 months, then that'll be fine.
Otherwise, do any of you clever people know any work-arounds?
Any further questions you need to ask, please don't hesitate.
Many thanks
Steve
Nokia Enthusiast
Solved!
Go to Solution.

Pinpointing the problem may be very difficult as Ovi-Suite appears to be extremely unpredictable.and getting Ovi-suit tu run an sync properly seems to be largely a matter of luck.
I have just set-up three brand new identical HP workstations for our Geo-Information Department.
All were set up from the same disk image with only Win 7 Pro Office 2010, then directly Ovi-Suite as our Geo-Information guys insisted on Nokia handsets against our advice.
On one, machine Ovi-Suite crashed on launch and was unable to run at all.
on the second, Sync to OL 2010 failed consistently.
ont the third, everything ran fine with an N97 but an N8 was not recognized
So i got curious and run tests on one machine: I installed the same disk image a total of six times (clean win7-64, clean Office 2010 3 times, Office 2003 three times)
Office 2010
the first time i had the crash on launch, second time OL2010 sync fail, third time it ran ok.
Office 2003
First time notes sync failed, second and third time all was ok.
So the issue is definitely with Ovi-Suite and it appears to be pure luck whether is runs or not and if it runs at all, whether it syncs or not.
Syncing OL 2010 seems to be much trouble prone than OL2003, 64bit appears to be much less stable than 32, onb win 7 it seems to have slightly fewer issues than on XP.
We have NO issues with any other sync software (Palm, BB, Fruit, S-E, Microsoft, even Nokia PC-Suite).
None of the software is run with admin privileges (as we just do not give admin rights to users). If software requires admin rights to be installed, it is done by Data Center employees.
I'm afraid one's best bet to get Ovi-Suite running is trial and error, or if the handset supports it, use PC-Suite, which is what we do.
Ovi-suite users, according to our logs, generate over 70% of our smart phone related support calls, even though they are only 6% of our smart phone user base.
As a result, we currently have all Nokia handsets that do not work with PC-Suite and require Ovi-Suite blacklisted in our organization, meaning we won't support them in any way. Installation of any flavor of Ovi-Suite is prohibited on user PCs as long as it does not become more stable, reliable and less of a resource hog.
Ever seen a black lemon? They turn black when they rot. My N97 is black. 'nuff said

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
i receive the error 12 This device cannot find enough free resources that it can use. please help

1. You have placed problem in wrong forum, or use different Windows operating system
2. Double check your resources, namely in Disk manager. What is free space on HDD?
Regards
Milos

Driver istallation problems; win 7 64 bit; Error I-001

Similar Messages

Maybe you are looking for