Driver missing - PCIe Data Acquisition and Signal .....

Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
All the drivers are working (so far) and i haven't encountered many problems.
However, there is one thing bugging me:
When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
Has anyone seen/resolved this, and if so, how?
Thanks.
Kaj.

Okay, will do.
Thanks.
Also i wonder if you could help with another problem?
http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0

Similar Messages

  • Z600 workstation missing pci data acquisition and signal processing controller driver

    I just installed Win7 Pro x86 on my Z600 workstation.  It was an upgrade from WinXP Pro.  In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02.  Can someone assist me in finding these drivers.  I looked on the Support/Drivers page for this  model but couldn't find anything.
    This question was solved.
    View Solution.

    Hi,
    You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • PCI Data Acquisition and Signal Processing Controller driver

    I've installed win 8.1x64 on my HP Probook 450 G2 but I am missing the PCI Data Acquisition and Signal Processing Controller driver.
    Can you please help?
    Thanks,
    Leontina
    This question was solved.
    View Solution.

    Hi:
    Please see if installing the Intel Chipset driver installs that device.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

  • Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

    Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

    Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver.  Click on the driver tab. Click on Update driver.  Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

  • Pci data acquisition and signal processing controller -Device software not installed

    My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed  on my Device manager.
    Please suggest me a suitable solution.

    No its not working , Give me an alternate solution.

  • E5-571 PCI Data Acquisition and Signal Processing Controller & SM Bus Controller

    I upgraded from Windows 8.1 to Windows 10. Windows Update says that it is up-to-date. Windows Devices Manager shows a problem with two devices: PCI Data Acquisition and Signal Processing ControllerSM Bus Controller What are these devices and where do I locate the drivers for them?

    That should do it. I've been pleasantly surprised by how well older drivers are working in Windows 10. I had to install Vista 64bit drivers for an ATI video card (the latest working drivers for the card) and they actually worked!

  • Re: Device Manager - Other Device "PCI Data Acquisition and Signal Processing Controller"

    I have the same problem and I am not good at PC
    Can you  show me , in detail , of where can I download that driver please?
    Solved!
    Go to Solution.

    in that case, let's start over.
    what OS are you using?   is this under a clean installation of windows or a factory installation from lenovo?   what device is missing a driver?   what lead you to think you needed the above driver?
    please be as specific as possible.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • T450s - pci data acquisition and signal processing controller

    I am installing a fresh build of win 8.1 and I cannot seem to find this driver. Anyone know what this is?

    please install Intel Chipset driver. I fixed mine with it!
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

  • Lenovo 14 20DM correct driver for 'Data Acquisition and Signal Processing Controller'

    Hi Everyone, I am the happy owner of a new Yoga 14 20DM. A few days ago I made the decision to upgrade to Windows 10. Whilst the upgrade went smoothly I did have to install a number of drivers manually. At the moment I am stuck on trying to install the 'PCI Data Acquisition and Signal Processing Controller' (as shown below).  I have tried right clicking on the device then selecting Properties > Driver (tab) > Update Driver > Search automatically for updated driver software, however doing so only shows the screen capture below!  Furthermore I have searched the Lenovo support page for a suitable driver however none is available! http://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-yoga-14/20dm?TabName Finally I have also installed, and run, 'System Update 5' the software program available from Lenovo. However it was not able to install a correct driver for this device. I have done a little searching on this topic, and have read a couple of stories about people installing an incorrect driver for this device, and then experiencing blue screens! Can anybody suggest how I can go about locating and installing the correct driver for this device? Any help will be greatly appreciated. Kind Regards, Davo

    Hi Ingemann, Ultimately I decided on the newest version of the Intel Chipset Device Software (INF Update Utility), which at this time (on the Intel website) is version 10.0.27. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- Interestingly enough I was presented with the message below when I ran this executable.  I selected Downgrade (with some trepidation), and after rebooting was pleasantly surprised to see that the troubled device was missing from the list. I can only assume that this means the correct drivers were installed. Thanks you very much for your help. Kind Regards, David

  • Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

    Link to picture
    hi everyone, 
    find original w8 cd and then i installed, when i was installing
    i deleted all recovery and other partition, i did not think what can i do,
    but then i activated windows and installed all driver, but i taking 
    after all drivers it stayed
    2''unknown devices''
    and when i rebooted, it says, usb device not recognized'' and also
    ''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
    i read related for w7 same problem, but what i will do now ?
      thanks.
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    hi adilsefaersan,
    Welcome to Lenovo Community Forums!
    By opening your Device Manager right click on one unknown device and choose properties,
        >On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
         > then copy the value and post back here whats on the Value pane
    Do it for all those unknown Device and Post here the Value of the hardware ids
    also can you share your Windows Version and bit type so we'll knwo the correct download page for you
    Thanks and Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Missing pci bus 2 and PCI/VEN_10EC&DEV_5209& SUBSYS_3577 103C&REV

    missing pci bus 2 and PCI/VEN_10EC&DEV_5209& SUBSYS_3577 103C&REV.             Can someone please help me and tell me how to get these drivers downloaded to my pc.Id really appreciate it and thanks in advance...

    Hi, It is the card reader. Please try the first one for Windows:    http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false Regards.

  • JDBC Thin Driver Support for Data Encryption and Integrity

    Hello JDev Team,
    I am trying to implement JDBC Thin Driver Support for Data Encryption and Integrity.
    It works fine with java.sql.Connection and java.util.Properties like in the following code:
    DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
    Properties props = new Properties();
    int level = AnoServices.REQUIRED;
    props.put("oracle.net.encryption_client", Service.getLevelString(level));
    props.put("oracle.net.encryption_types_client", "( RC4_40 )");
    props.put("oracle.net.crypto_checksum_client",Service.getLevelString(level));
    props.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
    Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:main", props);
    etc...
    But I am developing an application with InfoSwing components and it has a different way to connect to Oracle database using oracle.dacf.dataset.connections.Connection, like this:
    sessionInfo1.setAppModuleInfo(new ModuleInfo("bc", "BcModule"));
    sessionInfo1.setConnectionInfo(new LocalConnection("JDBCThin"));
    sessionInfo1.publishSession();
    My question is:
    Is there any way to implement DataEncryption and Integrity into this type of connection?
    Thanks a lot in advance.
    Victor Bykov
    null

    Victor,
    No, you can't do this from DAC, but I've been discussing it with the developer, and we both think this capability would be useful to have, so I've logged it as an enhancement request.
    I do have a question for you. Once you've made the JDBC connection, do you need access to the Connection object afterwards? We're thinking of how the change could be implemented, and one way would be to allow you to pass in a Properties object when creating your own NamedConnection.
    Thanks
    Blaise

  • I want to acheive digitally triggered data acquisition and using AIO lines for triggering connecting to PFI lines but no response.

    How to acheive digital data acquisitions using AO signals as trigger signal.

    Greetings,
    I am not sure that I have a clear understanding of your question. It appears that you want to perform a triggered acquisition. You mentioned both analog input (AI) and analog output (AO). Which type of operation are you performing? Are you using digital or analog triggering? Also, it would be helpful if you could mention what hardware and software you are using.
    Spencer S.

  • Problem with data acquisition and motion control

    I have PCI-6024E and PCI-7342 cards on a single PC. Servo motion control works fine when it goes alone or is accompanied by one point data acquisition in a while loop, but when I start data acquisition with specified sample rate, the motor moves with breaks.
    Does anybody know what is the problem? Is it possible to fix it?

    How are you performing your motion? Is it a position move or a velocity move? How are your triggering the data acquisition? Using breakpoints on the 7342? If so, are you using single breakpoints or modulo? How are you configuring the data acquisition rate? Are you triggering just the start to the acquisition and the unsing the daq scan clock or are you using the motion controller to send the scan clock itself?

  • High-speed data acquisition and DMA

    Hi, I have a custom home-made 4 channel, 16 bit data acquisition board that has onboard memory of 2 GB and can sample at 250 MSPS. The daq returns data in 1 MB data block size. The Labview wrapper allows us to operate this board in two modes (continuous and acquire once). In acquire once mode, I can use the circular buffer architecture and stream data to the disk (difficult to view data in real-time). The continuous mode work in a way that arims the daq board acquires the data, rel-arms the daq for next 1 MB data and can return data for real-time display. However, during this arm/re-arm time crucial information is lost. The solution would be to access the DMA data as fast as we can and process it. Can you please show me an example to achieve this in simulation mode?
    Thanks
    RY

    Then you say the DAQ time take 1 sec, and the processing time about 4 second. How do you know this? Without having any VIs. And why do you have to read your DAQ unit every second. Also are you sure your processing part of your program is optimal. It is quite easy for a beginner to write Labview code that is very slow then dealing with arrays.
     I am quite sure you have some Labview program. But you for some reason do not like the thought of posting your code. Just post them and let us take a look. Hard to help not knowing any thing
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

Maybe you are looking for

  • Trackpoint freezes on T60P

    A week or so ago the Trackpoint on my T60P (2007-AE7), running XP SP 3, started freezing a minute or two after booting the machine or waking it up.  Occasionally after a pause of a few minutes it will start working again on its own for a few seconds.

  • Images not loaded from WEB-INF/lib/images.jar

    The images are found in root/images/*.gif, but not when jarred up and placed in the lib folder. I've looked everywhere for a solution but all I've seen is suggestions of other places to put the folder, or to add it to the classpath. The jar is being

  • I can't register my serial number , how i do?

    i cAN'T USE MY SERIAL NO. THAT SEND TO ME AFTER I PAID ALREADY

  • Powerbook G4 12 " display is low res and faint

    Dear Gurus of such things, My Powerbook G4 12" display goes into some kind of low res and faint display after restarting. After days of this, it will suddenly become high res and clear again, for no reason that I can tell. It also recovers after my P

  • Hidden fields on PNP LDB

    Hi guys, Is that possible to show hidden fields from PNP LDB, before user have to make any interference? I mean, when I execute program related to PNP,  on selection screen at first time I get, for example, werks that is not on standard showing. I ha