DRIVER needed for SB PCI

Someone please help.
Thanks in advance.

http://us.creative.com/support/downloads/download2.asp?Product=864&dlcentric=843&Product_Na me=Sound+Blaster+PCI+28&OSName=Windows+2000
Here you are, sir. You have to look for them at www.creative.com next time, as that's what I did! :P

Similar Messages

Requirements for JDBC Driver needed for SOA 8 }connection pool

Hi,
I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
Thanks.
Lorenzo Jimenez

You can use pretty much any jdbc driver, including type 2 and type 4.
You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
Other than that, it is no different than configuring any other driver.

Windows 8.1 display driver needed for HP G62 laptop

Windows 8.1 display driver needed for HP G62 laptop

Help us to help you by posting the following information.
1. The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
2. The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
It would also help if you let us know which CPU your notebook has installed.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

Hi guys!
How's everybody doin?
I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
I'm using 2 HD's (one with OS9), the other (with OSX)
I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
Thanx
Everyone is very helpful around here
Mike

Hello again Carl, and Dave
I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
with 9.2 and the ATI 9000 Mac Pro - take a look:
http://discussions.apple.com/message.jspa?messageID=4289264#4289264
Wonder if your driver would solve this?
But can I put your driver in the system while it's still functioning with the older OEM video card back in?
(that's the only way I can get the system not to freeze)
Thanks
Mike

Hp hs2434 windows 7 driver needed for dm1 4310nr

Hi all,
I recently formatted my dm1 4310nr from windows 8 to windows 7. I went to the driver page for the dm1 and it had the Ericsson HP hs2320/hs2330/lc2000/lc2010/hs2340 drivers for win7/8, but not the HP hs2434 drivers.
The hardware ID is
USB\VID_03F0&PID_4B1D&REV_0002&MI_05
USB\VID_03F0&PID_4B1D&MI_05
Thanks!

You don't need monitor drivers, the operating system runs it natively (plug'n'play).
What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

CanoScan 88))F driver needed for Snow Leopard

I need a Driver for the Canon CanoScan 8800F. It does not work with the system. I checked ith Caon and there isn't a driver for it. Does anyone know how to fix it?

Looking at the Canon Australia web site, there is a version 13.9.1 driver posted for the CS8800F that quotes 10.6 as being supported.
http://support-au.canon.com.au/contents/AU/EN/0100018002.html

Canon 3245 driver needed for Mac OS X Yosemite 10.10.1

Dear
All the drivers available on Canon website do not support version 10.10.1
I am urgently in the need for a driver Canon 3245.
Please help.
Thanks and Regards
Shubham
Mackbook Pro, OS X Yosemite, Version 10.10.1

This includes drivers for 10.10
http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _3225_3230_3235_3235i_3245_3245i/imagerunner_3235#DriversAndSoftware

Web-Cam: Linux Driver Needed For T400

Hi all,
I have Lenovo T400 that works perfectly. Had Win-7 Ultimate dual-booting with new install of Linux Mint 9 (Isadora). Decided to delete Win-7 Ultimate.
Linux Mint OS 9 fully confiqured and running nicely recognizing all hardware except FingerPrint and Webcam device.
The Fingerprint device is cool, but would like Webcam Device Driver.
Is there a Webcam driver available for the Lenovo T400? If so, please reply,
Warmest Regards,
~ digi

In a terminal as your user:
[code]
lsusb
[/code]
You will see the device ID code for your camera. Here is mine on ThinkPad Edge: 04f2:b1cf
You can then do a google search for "Linux web cam xxxx:xxxx" compatibility. It is likely that the driver is already loaded because of the auto detect function of the kernel scripts.
You can check that in a terminal as your user:
[code]
lsmod
[/code]
Look for modules: v4l1_compat, videodev, uvcvideo.
Neal

Driver needed for PCI Data Acquisition and Signal Processing Controller of HP 15- r247tu

Install the Windows 10 Intel IMEI Intel Management Engine Interface (MEI) Driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69593.exe The latest version of the Intel chipset driverhttp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69575.exe All Windows 10 drivers available from HP are at the following link.http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7693973#Z7_3054ICK0KGTE30AQO5O3KA30R1

Hi: Try the chipset driver directly from Intel...the second file is the auto install file. https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility- If that driver does not install the PCI Data Acquisition and Signal Processing Controller, which the chipset driver should install, download the first file listed above (zip file). Unzip and extract the contents to its folder. Go to the device manager and click on the above device needing the driver. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option, and browse to the unzipped driver folder. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot.

Driver needed for Network controller,PCI Device,SM Bus controller

Need helpt to get the drivers for win 7 64 bit for Network controller, PCI Device,SM Bus controller, Universal Serial Bus controller, PCI Encryption/Decryption controller

Hi: For the smbus and usb 3 controllers, download and install the amd chipset drivers and reboot. http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 PCI device: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en&os=4063&product=7174407&sw_lang= PCI Encryption/Decryption controller: Download and run this driver. Then you have to manually install it. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1 To manually install the driver, go to the device manager, click on the PCI E/D Controller needing the driver. Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install. Then reboot. Network controller...need the hardware ID for that because I don't know what model wireless card your model has. Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category. The network controller device will have a little ! mark next to it. So, find the network controller device, click on that and then click on the Details tab. Now you see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the third item (Hardware ID's). Post the top string of characters you see in the window.

Driver development for custom PCI card

Hi friends,
I've a PCI card developed in-house. How to prepare a driver for the same in LabVIEW? Can I develop drivers in VISA? I don't have a manufacture id. Is there any other method to develop a driver for PCI card? Once developed, can I use them for other platforms like VC++? My OS is Windows 9X/NT & 2000. I need a driver to use for all these. Lot of querries! hope I made it clear.

THE ANSWER IS THAT YES YOU CAN DO THIS IN NI-VISA!
Some have said that you need a kernel driver. This is partially true in that a PXI or PCI card (they are the same as viewed by the OS) must have a kernel driver. NI-VISA provides one for you.
You said that you do not have a manufacturer ID. This is a requirement of all PCI cards and no kind of driver will work until the card has one. Once you have this ID, run the VISA PXI Driver Development Wizard and it will generate an INF for you for all supported NI-VISA environments that support PXI/PCI. Read the instructions in the appropriate INF file for how to install it into the system so that the OS will attach NI-VISA to your device. It's really simple. NI-VISA supports PXI/PCI on Windows 95, 98, ME, NT
4, 2000, XP, and LabVIEW RT.
Some have said that MAX will just show you all PXI/PCI devices in your system. Your device will not show up until NI-VISA can see it, and that won't happen until you generate an INF as described above.
Since the INF file associates NI-VISA itself to your card, the ADE you use does not matter. NI-VISA supports PXI/PCI in LabVIEW, CVI, MSVC, Visual Basic, or any other ADE that normally works with VISA.
NI-VISA works well even with more advanced devices because we support all types of register accesses (config, I/O, memory) as well as interrupt handling. Just look at the visa.h that NI ships in the VXIpnp directory. If you are using C/C++, make sure you define NIVISA_PXI before including visa.h. If you use LabVIEW, you need to use the address space numbers as defined in visa.h.
Good luck.
Dan Mondrik
Senior Software Engineer, NI-VISA
National Instruments

Printer Driver needed for Windows 8.1 Computer

I just bought a new computer and I need printer driver for HP Photosmart C4380. I am runing windows 8.1 so I can install my printer.

@KRS26
Welcome to the HP Forums!
I am here to help you find the drivers for your Photosmart C4380 to install on your new PC.
Click this link, download and follow the installation instructions and you should have your printer installed in no time: HP Photosmart Full Feature Software and Drivers
I hope that helps, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Driver needed for Inspire P580 5.1 surround sound speakers system

hi
Can someone help me ASAP...
I have looked and tried everything possible to find the driver for the Inspire P580 5.1 speaker system but cannot find this and have lost my cd and need this driver as i have re installed windows and lost it...
can you help me please?

hi guys
Thanks for your replies very much appreciated!
well i have an ATI Readon 9800SE All in Wonder graphics card and also an nVidia nForce2 which i assume is my sounds card...sorry i am not very clued up as you may have guessed..... I have downloaded both drivers and updates from these sites and other things on the same site which i thought would fix the issue but it has not....
i will however once i get home tonight from work plug in some headphones and see if this works, great idea!
however for now my speakers are still not working, actually i am getting no speaker display in the bottom right hand corner of my screen next to the time? does this say something to anyone?
Again much thanks for the help and i will keep trying all your suggestions as well as my own... :smileyvery-happy:

Driver needed for ideaTab A2107A

Hello,
in Germany a 7'' Tablet from Lenovo is avaliable, the ideaTab A2107A!
I need a driver for this Item to use the Google-Tools to update the operating - system!
Does anyboby here know, where to find this driver?
Thank you for your fast reply!

The new drive should just work straight out of the box unless, it is (a) faulty, (b) incorrectly installed, or (c) the incorrect drive.

OfficeJet 7610 driver needed for OS X 10.5.8

Urgent help needed.
I purchased an OfficeJet 7610 without paying attention that it does not support OS X 10.5.8 Now I'm stuck with my computer not talking to the printer. Is there any generic driver out there or any way that can help? Thanks a ton!!
R
This question was solved.
View Solution.

Hi,
Try using an alternative driver and check ig that may help.
Download and install the HP Officejet 7500A which support B-Sizes printing as well:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-86352-1&cc=us&dlc=en&lc=en&...
If the installation prompts to select your device you should see a checkbox or a button that the device is not listed and complete the intsallation without configuring the device, I would also suggest selecting HP Recommeded Software wgile installing
Once you are done, ensure the printer is conencted to your Mac through a USB or through a network, go to Print & Fax and click the plus sign.
Select the listed 7610, within the Print Using drop-down click on Select Printer Sotware and select the 7500 E910 from the list.
Try printing and check if that may work.
For scanning, try opening the HP Scan under Applications > Hewlett-Packard and check if it may able to locate the 7610 sanner.
If it does not list the 7610 you may try the 3rd party VueScan software which seems to support the scanner and compatible with 10.5:
http://www.hamrick.com/vuescan/hp_officejet_7610.html
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

DRIVER needed for SB PCI

Similar Messages

Maybe you are looking for