Driver not valid for HP Pavilion dv6t

Need to update my Intel HD Graphic driver.
Tried HP and Intel and both are stating that the driver being installed is not validated for this computer. Please obtain the appropriate driver from the computer manufacture. Set up will exit.
Can anyone help? TY

@ls1313 ,
Hello and thank you for posting on the HP support forums.  Here is the link to the only supported drivers for your notebook.
HP Pavilion dv6t-3000 CTO Entertainment Notebook PC
I hope this helps.
Have a great day and thank you for posting.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

  • Cannot export private key: "key not valid for use in specified state"

    Hi,
    This is a bit of a long story but I hope someone can give us some guidance.
    We use authentication certificates issued from our own Enterprise CA to control user and machine authentication via RADIUS/NPS for our wireless network.  Certificates are deployed via group policy/autoenrollment. In general this works well but
    we have an intermittent problem where user authentication stops working for a user who was fine before. The user certificate looks OK via Certmgr (shows as valid, shows that there is a private key associated with the certificate).  The NPS server
    logs show that the machine has been authenticated and granted access, but the user in this situation doesn't show up in the server logs at all. 
    The only solution in this case is to connect to the wired network and request a new certificate for the user (either via certmgr or just by deleting the duff cert and logging off/on again to get the cert via autoenrollment).
    The interesting thing is that while a "working" certificate can be exported with no problem, a duff certificate cannot be exported with its private key, giving the error "key not valid for use in specified state". (Obviously the certificates
    come from the same template, and the key is not marked unexportable).  The key files are present in %userprofile%\Appdata\Roaming\Microsoft\Crypto\RSA and the user permissions on these files look correct.
    After much searching of the forums I tried running certutil-repairstore on the duff certificate and that also returned the same error.  I also tried an undocumented switch Certutil -user -key -v and again, got a very similar error "Loadkeys returned
    key not valid for use in specified state. 0x8009000b (-2146893813)".
    I'm assuming that the fact that the key is unexportable/corrupt is also the reason why the certificate can no longer be used for authentication.
    Does anyone have any clues as to what might be causing this, and/or if a certificate with a key in this state can be repaired?
    Thanks!

    I can just share an experience I once had that was somewhat similar:
    In this case certificates could sometimes not be enrolled and the CSP came up with a related error message.
    The root was the software / driver (?) for a hardware dongle required to run some software. This "driver" added a registry key to the list of CSPs (under these HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider - but I have seen this with
    XP, so the exact location might be different now).
    This fake CSP entry that had quite a weird name effectively broke other CSPs. After removing the access to / generation of keys worked fine.
    So it would be interesting to know if you run some software that is "close to CSPs or cryptography".
    Elke

  • Key not valid for use in specific state message when installing 5660 Envy

    Hello -
    Trying to install this 5660 envy on my Windows Vista laptop and I'm receiving this 'key not valid for use in soecific state' message - help please!

    Hello there! Welcome to the forums @SSPreschool 
    I saw your post about the installation error you're recieving when trying to install your Envy 5660, and I want to try and help you!
    Please run this tool to uninstall the printer: Fix problems that programs cannot be installed or uninstalled
    Restart your computer to finish the uninstall
    Re-install the full driver: HP ENVY 5660 e-All-in-One Printer Series Full Feature Software and Drivers
    I hope that does the trick, please let me know the turn out!
    Happy Holidays
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • URGENT!!!! get the same message "serial number not valid for this product" and I am RE installing on the same computer that crashed last week...

    I am attempting to RE install PSElements 11 on a computer where it WAS last week but had a hard drive crash. The message is wrong and the serial number is correct. URGENT as I am at the apple store trying to get help from apple people, and they DON'T want me to install a new version of Yosemite as it will make computer slower...

    Error "The serial number is not valid for this product" | Creative Suite
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  • Fatal Error During Solution Center Install - "Key Not Valid for Specified State"

    I have encountered an error while trying to install HP Solution Center for my J6480 All-In-One.  The software I'm installing is "OJJ6400_Full_10.exe"
    I can get past the installation option selections (i.e., the screens that allow selection of which components you want installed) as well the online check for updates to the software.  However, shortly after that I get a fatal error the full text of which are:
    Error Situation Code: 23551631
    The following lines were retrieved from the installation error logs.
    Now Launching=X:\hpzmsi01.exe -m dot4wrp "-*"
    ".\autorun_network.inf" "-networkonly" -| XXX -f X:\DIVins??.DAT
    Error message received: Key not valid for use in specified state.
    X:\cioum32.msi failed with return code 1603
    MSIInstall() failed with 1603
    Exit code=1603
    Your help is appreciated.  Thanks.

    Hey @redleader74,
    At this time I am going to have you unlock the hidden System Administrator Account and attempt an install under there. Ideally, if everything installs fine you should be able to log back into your normal User Account and the complete software and driver package for your HP Officejet J6480 All-in-One Printer will be installed and functional. Can I please have you follow the steps below.
    Step 1: Uninstall Drivers:
    Click on your Start menu
    Select All Programs
    Select the HP folder
    Select your HP Officejet
    Select Uninstall
    Please follow any onscreen prompts to complete the uninstall. Once the uninstall is complete please proceed to the next step.
    Step 2: Clear Temp Files:
    Click on your Start menu
    In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
    When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
    Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
    Close the Temp folder once it is emptied
    Right click the Recycling Bin on your desktop and select Empty Recycling Bin
    Step 3: Unlock System Administrator Account:
    Click on your Start menu and under the 'search programs and files' box type CMD
    CMD will populate as a search option above, just right click on it and 'run as administrator'
    Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
    Next, close CMD and restart your computer
    When your computer comes on log into the new Account that should show. It will be called Administrator and will not have a password on it.
    If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator Account we just unlocked
    Step 4: Install Device:
    Under the Administrator Account please click here to download the latest drivers for your printer.
    Once the website opens select the Download button on the top left
    Once the download is complete please follow the onscreen instructions to install your printer
    Once the installation is complete, please test the functions of your HP Officejet to ensure that everything is functioning properly now. If everything installs fine, log out of the Administrator Account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your Account. Once you're logged into your User Account please test your HP Officejet again to verify that your print and scan functions are still working.
    If everything works fine, you will want to Hide the Administrator Account.
    Go to your Start menu and under the 'search programs and files' box type CMD
    CMD will populate as a search option above, just right click on it and 'run as administrator'
    Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
    Next, close CMD and restart your computer
    Please let me know if these steps resolve your issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Channel or repeated capability name specified is not valid for the instrument

    I am using the two SCXI-1193 rf switch configured as a Quad 8x1 Mux and I'm using NISE v2.0.1.  I have created a hardwire that connects from ch0 of rfSwitch_1 to com0 of rfSwitch_2.  So, for example, when I go to create a route from rfSwitch_1 com0 to ch3 of rfSwitch_2, I get the following error:
    "Channel or repeated capability name specified is not valid for the instrument."
    Why am I getting this error message.  It seems to me that since there is a hardwire created between the two rfSwitches there shouldn't be any problems connecting a path from rfSwitch1 to rfSwitch2 between the two quad mux's.
    I am using the two SCXI-1193 rf switch configured as a Quad 8x1 Mux and I'm using NISE v2.0.1.  I have created a hardwire that connects from ch0 of rfSwitch_1 to com0 of rfSwitch_2.  So, for example, when I go to create a route from rfSwitch_1 com0 to ch3 of rfSwitch_2, I get the following error:
    "Channel or repeated capability name specified is not valid for the instrument."
    Why am I getting this error message.  It seems to me that since there is a hardwire created between the two rfSwitches there shouldn't be any problems connecting a path from rfSwitch1 to rfSwitch2 between the two quad mux's.

    I am convinced that the IVI configuration is corrupted which prevent you from using the SCXI-1193. If you do not have any hardware you would have had to simulate both SCXI-1193. The fact that you are seing all the channels in NICE virtual device but are getting error when trying to use them tells me that somthing changed in the IV configuration and that you are not using the initial topology used to read all the available channels for the 1193.  
    If you do not have any hardware connected to your computer then you need to follow the procedure below to ensure that the SCXI-1193 will work as expected.
    First create (2) SCXI-1193 simulated in MAX:
    1) Right-click Devices and Interfaces and select Create New.
    2) A dialog box prompts you to select a device to add. Select NI-DAQmx Simulated Device and click Finish.
    3) In the Choose Device dialog box, select Switch>>NI PCI-4021 (the switch controller is not important but you need one to be able to si mulate a chassis).
    4) Create a SCXI-1000 Simulated device using the step 1) to 3)
    5) Select the device created in 3) as the communicator
    6) When the chassi dialog appear, select SCXI-1193 in slot 3 and 4
    7) In the chassis Tab select 3: SCXI-1193 as the Communicating SCXI Module Slot. By default the SCXI-1193 are configured as Quad 8x1
    Now you can create a NISE virtual device just like if you had (2)  SCXI-1193 connected to your computer. Note that logical names and driver sessions have been created for both SCXI-1193 (need to close MAX and reopen) with correct entries. If you follow this procedure you will not encounter any more issue working with simulated hardware.
    Guy Ferraro
    Switch Product Support Engineer
    NI - USA

  • Is it Possible to change the DVD drive to Bluray for HP Pavilion dv6-6176sx

    Hi All,
    Is it Possible to change the DVD drive to Bluray for HP Pavilion dv6-6176sx Entertainment Notebook PC?
    Thanks
    This question was solved.
    View Solution.

    Sure it is not even very difficult. Do you just need a BR reader or a burner/reader? The replacement disk drive will be $80-120 or so, maybe a bit less. You can find them on eBay. You can use a generic one but that may require some reworking of the faceplate or just get an original dv6-6000 BR drive on eBay. Swaps out with a couple screws on the bottom; slide out and slide in the replacement. You will need new software to play BR movies, of course.  
    Post back with any questions

  • When trying to update my Apps I am being advised my account is not valid for the UK, I must switch to the Ireland store. How do I do this?

    When trying to update or purchase Apps I am being advised my account is not valid for the UK Store and I must switch to the IReland store. How do I do this?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • Whenever I updated or downloaded a new app from the App Store, a message appears saying:   "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."   I made some research onl

    Whenever I updated or downloaded a new app from the App Store, a message appears saying:
    "Account Not In This Store
    Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
    I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
    When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
    "This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
    So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
    I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
    Can anyone help me please?
    Arian

    Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
    If you keep encountering problems contact iTunes support. They will help you sort it out.

  • Why do I get the message when I try to purchase an app or song on itunes using my iPhone5? "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."

    When I try to buy either an app or a song via iTunes, I have just started getting the following message and I am unable to change the store location. "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."
    This problem has only just started happening. I am on an iPhone5 iOS 7.0.4.
    Very frustrating. Can someone please tell me why & where the change has occured and how to fix it? In the past I have purchased many apps and songs on itunes and never had this problem.
    Thanks a mill :-)

    Click here and follow the instructions to change the iTunes Store country.
    (97125)

  • Outlook 2013 - Password change breaks S/MIME Certs "An error occurred in the underlying security system. Key not valid for us in specified state."

    AD password change comes up, user changes password.
    Tries to send signed or encrypted email with a Comodo S/MIME certificate, and gets the following error:
    ""An error occurred in the underlying security system.  Key not valid for us in specified state."
    I now have two reports of this error - one on Windows 7, and one on Windows 8.0 (remote user).
    The one on Windows 8.0, we tried removing their S/MIME cert from Outlook/Windows and re-adding, this did NOT resolve the issue.
    Plan was originally to have the 8.0 user ship their machine in, and wipe it, since nothing else could fix it and I wasn't finding anyone else with the same issue.  Now that I've got a second user with the same issue, its looking like a bug/issue and
    not a random glitch.
    Thanks in advance for any and all help with this!

    Hi,
    Thank you for your question.
    I am trying to involve someone familiar with this topic to further look at this issue.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Product is not valid for Sales org and distribution chain

    Hello friends,
    When i am saving the trade promotions , i am getting error message
    "Product XXXX is not valid for distribution chain XXXX, XXXX"
    I have maintained sales organization and distribution channel in commpr01 under sales and distribution tab.
    kindly help.
    Regards,
    Srinivas

    Hi Srinivas,
    the error is raised from the trade promotion CCA check - raised from method CL_CRM_MKTGS_PD_CCA_CHECK_HDLR~CHECK. There are the following checks performed:
    * There are several checks to do based on the distribtion chain
    * Execute the checks and identify which products fail which check
    1. *   Determine if the product passes the distribution chain check
    2. *   Determine if the product category 1 of the product assignment
       *   passes the product category check
    3. *   Determine if the product category 2 of the product assignment
       *   passes the product category check
    4. *   Determine if the product group of the product assignment
       *   passes the product group check
    5. *   Determine if the sales status of the product is set to blocked
    You may also need to check the sales and distribution data of the product category or product group of the mentioned product, if this is assigned to any.
    best regards,
    Johannes

  • Handle not valid for open spool request

    Hello everyone,
    i am facing an error while clicking the print preview option in change PO (me22n).
    i have given the dispatch time in further data of o/p as 'Send with application own transaction'.
    now, when i save and click print preview button i get an error as
    "Handle not valid for open spool request"
    Kindly give me some idea how to tackle this.
    Thanks
    gaurav

    Gaurav,
    I am having a similar issue and would appreciate if you could let us know how your problem was solved?
    What control parameters did you change to make this work?
    Thanks,
    Jay

  • ITunes / AppStore problem: I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    credit card it tells me my credit card is not valid for the store.
    Hi Don ...
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    The iTunes and Mac App Store are one in the same.
    And check out this support article here   >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • How to switch to a different app store? I am trying to update my apps but am getting a popup that says your account is not valid for use in the uS store. you must switch to the Canadian Store before purchasing. How do I do this?  I can't find the place

    I am trying to update my apps but keep getting a popup that says "Your Account is not valid for use in the US store. you must switch to the Canadian Store before purchasing." I can not find where to do this! Please help! Thank you!

    [Apologies to pdesteele for this slight OT bit, but it's all relevant to your question, I think ]
    We do have a place in the UK which we could use as an address, but for various reasons it gets a bit complex even though we still have a UK bank account. We moved to France when there were no iDevices and apps around, just bought the occasional music, so it wasn't a problem. Funny thing is I can't even download the free UK bank app because it's not available in the French store .
    I'll live with the problem for now as we plan to move back to the UK in a year or so - we miss the weather .

Maybe you are looking for